On September 7, 2004, the Commission released a Report and Order in the matter of "Unlicensed Devices and Equipment Approval." This document contains corrections to the final re...
On September 7, 2004, the Commission released a Report and Order in the matter of “Unlicensed Devices and Equipment Approval.” This document contains corrections to the final regulations that appeared in the
Federal Register
of September 7, 2004 (69 FR 54027).
DATES:
Effective October 7, 2004.
FOR FURTHER INFORMATION CONTACT:
Nancy J. Brooks, Office of Engineering and Technology, (202) 418-2454.
SUPPLEMENTARY INFORMATION:
Background
The final regulations that are the subject of this correction relate to “Unlicensed Devices and Equipment Approval” under § 15.247 of the rules.
Need for Correction
As published, the final regulations contain an error, which requires immediate correction.
2. Section 15.247 is amended by removing paragraph (b)(5) and by revising paragraph (e) and by adding paragraph (i) to read as follows:
* * * * *
(e) For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of paragraph (b) of this section. The same method of determining the conducted output power shall be used to determine the power spectral density.
* * * * *
(i) Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines.
See
§ 1.1307(b)(1) of this chapter.