80 FR 16379 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Plating and Polishing Area Sources (Renewal)

ENVIRONMENTAL PROTECTION AGENCY

Federal Register Volume 80, Issue 59 (March 27, 2015)

Page Range		16379-16379
FR Document		2015-07028

The Environmental Protection Agency (EPA) has submitted an information collection request (ICR), ``NESHAP for Plating and Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Renewal)'' (EPA ICR No. 2294.04, OMB Control No. 2060-0623), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed extension of the ICR, which is currently approved through April 30, 2015. Public comments were previously requested via the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number.

Federal Register, Volume 80 Issue 59 (Friday, March 27, 2015)

[Federal Register Volume 80, Number 59 (Friday, March 27, 2015)]
[Notices]
[Page 16379]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2015-07028]



[[Page 16379]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0097; FRL-9923-32-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Plating and Polishing Area 
Sources (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), ``NESHAP for Plating and 
Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Renewal)'' 
(EPA ICR No. 2294.04, OMB Control No. 2060-0623), to the Office of 
Management and Budget (OMB) for review and approval in accordance with 
the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed 
extension of the ICR, which is currently approved through April 30, 
2015. Public comments were previously requested via the Federal 
Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. 
This notice allows for an additional 30 days for public comments. A 
fuller description of the ICR is given below, including its estimated 
burden and cost to the public. An Agency may not conduct or sponsor and 
a person is not required to respond to a collection of information 
unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before April 27, 
2015.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0097, to (1) EPA online using www.regulations.gov (our 
preferred method), or by email to [email protected], or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email 
to [email protected]. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax 
number: (202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, EPA WJC 
West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The 
telephone number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for Plating and Polishing Area Sources regulations 
apply to respondents that are plating and polishing facilities engaged 
in any of the following processes: Non-chromium electroplating; 
electroless or non-electrolytic plating; other non-electrolytic metal 
coating processes such as chromate conversion coating, nickel acetate 
sealing, sodium dichromate sealing, manganese phosphate coating, 
thermal spraying; dry mechanical polishing of finished metals and 
formed products after plating or thermal spraying, electroforming, and 
electro-polishing. New facilities include those that commenced 
construction or reconstruction after the date of proposal. The required 
annual reports are used to determine periods of excess emissions, 
identify problems at the facility, verify operation/maintenance 
procedures and for compliance determinations. This information is also 
collected to assure compliance with 40 CFR part 63, subpart WWWWWW.
    Form Numbers: None.
    Respondents/affected entities: Owners and operators of plating and 
polishing facilities.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart WWWWWW).
    Estimated number of respondents: 2,900 (total).
    Frequency of response: Initially and annually.
    Total estimated burden: 64,315 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $6,304,966 (per year), which includes $8,314 
in annualized capital/start-up costs and 0 in operation & maintenance 
costs.
    Changes in the Estimates: There is an increase of 31,208 hours in 
the total estimated respondent burden compared with the ICR currently 
approved by OMB. The change in burden and cost estimates occurred as a 
result of updating the burden tables to accurately reflect the 
reporting and recordkeeping requirements of the rule.

Courtney Kerwin,
Acting Director, Collection Strategies Division.
[FR Doc. 2015-07028 Filed 3-26-15; 8:45 am]
BILLING CODE 6560-50-P

Federal Register / Vol. 80, No. 59 / Friday, March 27, 2015 / Notices 16379

ENVIRONMENTAL PROTECTION Compliance, Mail Code 2227A, estimated respondent burden compared
AGENCY Environmental Protection Agency, 1200 with the ICR currently approved by
Pennsylvania Ave. NW., Washington, OMB. The change in burden and cost
[EPA–HQ–OECA–2014–0097; FRL–9923–
DC 20460; telephone number: (202) estimates occurred as a result of
32–OEI]
564–2970; fax number: (202) 564–0050; updating the burden tables to accurately
Information Collection Request email address: yellin.patrick@epa.gov. reflect the reporting and recordkeeping
Submitted to OMB for Review and SUPPLEMENTARY INFORMATION: requirements of the rule.
Approval; Comment Request; NESHAP Supporting documents, which explain Courtney Kerwin,
for Plating and Polishing Area Sources in detail the information that the EPA
Acting Director, Collection Strategies
(Renewal) will be collecting, are available in the
Division.
public docket for this ICR. The docket
AGENCY: Environmental Protection [FR Doc. 2015–07028 Filed 3–26–15; 8:45 am]
can be viewed online at
Agency (EPA). www.regulations.gov or in person at the BILLING CODE 6560–50–P

ACTION: Notice. EPA Docket Center, EPA WJC West,
Room 3334, 1301 Constitution Ave.
SUMMARY: The Environmental Protection ENVIRONMENTAL PROTECTION
NW., Washington, DC. The telephone
Agency (EPA) has submitted an number for the Docket Center is 202– AGENCY
information collection request (ICR), 566–1744. For additional information [EPA–HQ–OPP–2015–0058; FRL–9922–78]
‘‘NESHAP for Plating and Polishing about EPA’s public docket, visit:
Area Sources (40 CFR part 63, subpart http://www.epa.gov/dockets. Registration Review; Draft Human
WWWWWW) (Renewal)’’ (EPA ICR No. Abstract: The National Emission Health and/or Ecological Risk
2294.04, OMB Control No. 2060–0623), Standards for Hazardous Air Pollutants Assessment; Notice of Availability
to the Office of Management and Budget (NESHAP) for Plating and Polishing
(OMB) for review and approval in AGENCY: Environmental Protection
Area Sources regulations apply to
accordance with the Paperwork Agency (EPA).
respondents that are plating and
Reduction Act (44 U.S.C. 3501 et seq). polishing facilities engaged in any of the ACTION: Notice.
This is a proposed extension of the ICR, following processes: Non-chromium SUMMARY: This notice announces the
which is currently approved through electroplating; electroless or non- availability of EPA’s draft human health
April 30, 2015. Public comments were electrolytic plating; other non- and/or ecological risk assessment for the
previously requested via the Federal electrolytic metal coating processes registration review of
Register (79 FR 30117) on May 27, 2014 such as chromate conversion coating, propoxycarbazone-sodium, and opens a
during a 60-day comment period. This nickel acetate sealing, sodium public comment period on this
notice allows for an additional 30 days dichromate sealing, manganese document. Registration review is EPA’s
for public comments. A fuller phosphate coating, thermal spraying; periodic review of pesticide
description of the ICR is given below, dry mechanical polishing of finished registrations to ensure that each
including its estimated burden and cost metals and formed products after pesticide continues to satisfy the
to the public. An Agency may not plating or thermal spraying, statutory standard for registration, that
conduct or sponsor and a person is not electroforming, and electro-polishing. is, the pesticide can perform its
required to respond to a collection of New facilities include those that intended function without unreasonable
information unless it displays a commenced construction or adverse effects on human health or the
currently valid OMB control number. reconstruction after the date of proposal. environment. As part of the registration
DATES: Additional comments may be The required annual reports are used to review process, the Agency has
submitted on or before April 27, 2015. determine periods of excess emissions, completed a comprehensive draft
ADDRESSES: Submit your comments, identify problems at the facility, verify human health and ecological risk
referencing Docket ID Number EPA– operation/maintenance procedures and assessment for all uses of the previously
HQ–OECA–2014–0097, to (1) EPA for compliance determinations. This listed pesticide chemical. The ecological
online using www.regulations.gov (our information is also collected to assure risk assessment includes or will include
preferred method), or by email to compliance with 40 CFR part 63, an assessment of risks to listed species,
docket.oeca@epa.gov, or by mail to: EPA subpart WWWWWW. and the human health and ecological
Docket Center, Environmental Form Numbers: None. risk assessments includes or will
Protection Agency, Mail Code 28221T, Respondents/affected entities:
include a determination of endocrine
1200 Pennsylvania Ave. NW., Owners and operators of plating and
disrupter effects for the case. After
Washington, DC 20460; and (2) OMB via polishing facilities.
Respondent’s obligation to respond: reviewing comments received during
email to oira_submission@omb.eop.gov. the public comment period, EPA may
Address comments to OMB Desk Officer Mandatory (40 CFR part 63, subpart
WWWWWW). issue revised risk assessments, explain
for EPA. any changes to the draft risk
Estimated number of respondents:
EPA’s policy is that all comments assessments, and respond to comments.
2,900 (total).
received will be included in the public Frequency of response: Initially and The Agency also will request public
docket without change including any annually. input on any proposed risk mitigation
personal information provided, unless Total estimated burden: 64,315 hours measures before completing a proposed
the comment includes profanity, threats,
mstockstill on DSK4VPTVN1PROD with NOTICES

(per year). Burden is defined at 5 CFR registration review decision for the
information claimed to be Confidential 1320.3(b). previously listed pesticide chemical.
Business Information (CBI) or other Total estimated cost: $6,304,966 (per Through this program, EPA is ensuring
information whose disclosure is year), which includes $8,314 in that each pesticide’s registration is
restricted by statute. annualized capital/start-up costs and 0 based on current scientific and other
FOR FURTHER INFORMATION CONTACT: in operation & maintenance costs. knowledge, including its effects on
Patrick Yellin, Monitoring, Assistance, Changes in the Estimates: There is an human health and the environment
and Media Programs Division, Office of increase of 31,208 hours in the total registration is based on current

VerDate Sep<11>2014 20:59 Mar 26, 2015 Jkt 235001 PO 00000 Frm 00021 Fmt 4703 Sfmt 4703 E:\FR\FM\27MRN1.SGM 27MRN1

Document Created: 2015-12-18 11:36:33
Document Modified: 2015-12-18 11:36:33

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Notices
Action		Notice.
Dates		Additional comments may be submitted on or before April 27, 2015.
Contact		Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564-2970; fax
FR Citation		80 FR 16379