80 FR 70201 - Certain New Chemicals; Receipt and Status Information for September 2015
ENVIRONMENTAL PROTECTION AGENCY Federal Register Volume 80, Issue 219 (November 13, 2015)
Federal Register Volume 80, Issue 219 (November 13, 2015)
| Page Range | 70201-70206 | |
| FR Document | 2015-28842 |
[Federal Register Volume 80, Number 219 (Friday, November 13, 2015)] [Notices] [Pages 70201-70206] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2015-28842] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2015-0504; FRL-9936-40] Certain New Chemicals; Receipt and Status Information for September 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from September 1, 2015 to September 30, 2015. DATES: Comments identified by the specific case number provided in this document, must be received on or before December 14, 2015. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2015-0504, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave. Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from September 1, 2015 to September 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more [[Page 70202]] information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 55 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From September 1, 2015 to September 30, 2015 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected end Case No. Date received date for EPA Manufacturer/ importer Use(s) Chemical identity review -------------------------------------------------------------------------------------------------------------------------------------------------------- P-15-0703............................ 8/26/2015 11/24/2015 CBI..................... (G) Additive in toner... (G) Alkyl alkenoic acid, substituted alkyl ester, polymer with alkyl alkenoate and substituted alkyl alkenoate compd. with alkyl alkyl carbomonocyclic salt. P-15-0713............................ 9/1/2015 11/30/2015 CBI..................... (G) Contained use....... (G) Cellulose, polymer with substituted oxirane, 2- (diethylamino) ethyl ether. P-15-0714............................ 9/1/2015 11/30/2015 Kemira.................. (G) Paper strength (G) Modified polyacrylamide. additive. P-15-0715............................ 9/3/2015 12/2/2015 CBI..................... (G) Additive for inks... (G) Oxirane, 2-ethyl-, homopolymer, 3-(5-carboxy- 1,3-dihydro-,1,3-dioxo-2H- isoindol-2-yl) alkyl ethers. P-15-0717............................ 9/3/2015 12/2/2015 CBI..................... (G) Adhesive additive... (G) Triethoxysilylalkoxy polyalkylene glycol urethane. P-15-0718............................ 9/3/2015 12/2/2015 CBI..................... (G) Adhesive additive... (G) Triethoxysilylalkoxy polyalkylene glycol urethane. P-15-0719............................ 9/3/2015 12/2/2015 CBI..................... (G) Flame retardant (S) Poly (1,4-diisopropyl synergist. benzene). P-15-0720............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0721............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0722............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0723............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0724............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0725............................ 9/4/2015 12/3/2015 CBI..................... (S) Polyurethane (G) Aliphatic polyester prepolymer. polyol. P-15-0726............................ 9/4/2015 12/3/2015 CBI..................... (S) Co-polymer for use (G) Triethoxysilylalkoxy in adhesives and polyalkylene glycol. sealant formulations. P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in (S) Benzenemethanol, 3-ethoxy- household products. 4-hydroxy-. P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in a fine (S) Benzenemethanol, 3-ethoxy- fragrance. 4-hydroxy-. P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in (S) Benzenemethanol, 3-ethoxy- consumer products. 4-hydroxy-. P-15-0728............................ 9/9/2015 12/8/2015 TAKASAGO................ (S) Fragrance in other (S) Benzenemethanol, 3-ethoxy- products. 4-hydroxy-. P-15-0730............................ 9/10/2015 12/9/2015 CBI..................... (G) Additive for paper (G) Amphoteric and paperboard. polyacrylamide. P-15-0731............................ 9/10/2015 12/9/2015 CBI..................... (G) Additive for paper (G) Amphoteric and paperboard. polyacrylamide. P-15-0733............................ 9/10/2015 12/9/2015 Cadence Chemical (S) Coating for glass... (G) Alkane carboxylic acid, Corporation. hydroxy, hydroxyalkyl-alkyl, polymer with .alpha.-hydro- .omega.-hydroxypoly(oxy-1,2- ethanediyl) ether with alkyl- (hydroxyalkyl)-alkanediol (X:1), .alpha.-hydro-.omega.- hydroxypoly[oxy(alkyl- alkyldiyl)] and alkylenebis [isocyanatoalkane],-blocked. P-15-0734............................ 9/11/2015 12/10/2015 CBI..................... (S) Wastewater Heavy (G) Polymeric Sulfide. Metals Removal. [[Page 70203]] P-15-0735............................ 9/15/2015 12/14/2015 Cray Valley USA, LLC.... (S) Adhesive Formulation (S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11- dimethyl-3-methylene-1,6,10- dodecatriene, 2-methylbutene and methylstyrene. P-15-0735............................ 9/15/2015 12/14/2015 Cray Valley USA, LLC.... (S) Rubber Formulation.. (S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11- dimethyl-3-methylene-1,6,10- dodecatriene, 2-methylbutene and methylstyrene. P-15-0736............................ 9/18/2015 12/17/2015 CBI..................... (S) Industrial coating (G) Castor oil, polymer with resin for wood substituted alkanoic acid, substances. substituted carbomonocycle, dialkyl substituted alkanediol and TDI, substituted alkanone- blocked. P-15-0737............................ 9/16/2015 12/15/2015 CBI..................... (G) Intermediate........ (G) Ammonium salts of phosphate methacrylate. P-15-0738............................ 9/17/2015 12/16/2015 CBI..................... (S) Injection molding (G) Polysiloxane- additive to improve the polycarbonate copolymer. physical properties of plastic parts. P-15-0739............................ 9/17/2015 12/16/2015 CBI..................... (S) Component of (G) Epoxy Terminated Polymer. Flexible Foam. P-15-0740............................ 9/17/2015 12/16/2015 Allnex USA, Inc......... (S) Digital printing (G) Disubstituted alkanedioic applications. acid, polymer with substituted carbomonocycle, dialkyl carbonate, alkanediol and (alkylimino) bis [alkanol], acetate (salt). P-15-0741............................ 9/17/2015 12/16/2015 CBI..................... (S) Mixture of modified (G) Mixture of Modified urethane polymers used urethane polymers. as a deflocculating and dispersing additive in industrial coatings. P-15-0742............................ 9/17/2015 12/16/2015 CBI..................... (G) Component for tire.. (G) Modified Copolymer of Buta-1,3-diene and Styrene. P-15-0743............................ 9/17/2015 12/16/2015 Eden Innovations........ (G) The liquid solution (G) Nano particle liquid is an admixture that is concrete admixture. used by the concrete industry to enhance product performance. It is mainly used to increase the concrete's abrasion resistance, and increase the compressive and split tensile strengths; see internal comments. P-15-0744............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0745............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0746............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0747............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0748............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. [[Page 70204]] P-15-0749............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0750............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0751............................ 9/18/2015 12/17/2015 3 M Company............. (G) Construction (G) Naturally-occurring material. minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-15-0752............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polysiloxane, di-Me, dispersive use. epoxyfunctional. P-15-0753............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct. dispersive use. P-15-0754............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct. dispersive use. P-15-0755............................ 9/22/2015 12/21/2015 CBI..................... (G) Additive, open, non- (G) Polyester amine adduct. dispersive use. P-15-0759............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in urethane prepolymer. cast polyurethane elastomer parts: Open, non-dispersive use. P-15-0760............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in urethane prepolymer. cast polyurethane elastomer parts: Open, non-dispersive use. P-15-0761............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in polyester-based urethane cast polyurethane prepolymer. elastomer parts: Open, non-dispersive use. P-15-0762............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in polyester-based urethane cast polyurethane prepolymer. elastomer parts: Open, non-dispersive use. P-15-0763............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in polyester-based urethane cast polyurethane prepolymer. elastomer parts: Open, non-dispersive use. P-15-0764............................ 9/24/2015 12/23/2015 CBI..................... (G) Polyurethane (G) Isocyanate-terminated prepolymer for use in polybutadiene-based urethane cast polyurethane polymer. elastomer parts: Open, non-dispersive use. P-15-0765............................ 9/25/2015 12/24/2015 ANGUS Chemical Company.. (G) Chemical Absorbant.. (G) Tertiary Amino Polyol. P-15-0766............................ 9/28/2015 12/27/2015 Reichhold............... (S) Resin for flame (G) Halogenated epoxy polymer retardant polyesters. with alkeneoic acid. P-15-0767............................ 9/29/2015 12/28/2015 Reichhold............... (S) Resin used for flame (G) Halogenated bisphenol a, retardant polyester polymer with epoxy resin and applications. phenolic epoxy, alkeneoic acids. P-15-0768............................ 9/29/2015 12/28/2015 Allnex USA, Inc......... (S) Crosslinker in the (G) Alkanedial, polymer with construction of an in- alkyleneurea and alkyl- site encapsulation alkanediol. product. P-15-0769............................ 9/30/2015 12/29/2015 LUNA, Inc............... (S) Component of (G) Polyurethane Silane. protective coating. -------------------------------------------------------------------------------------------------------------------------------------------------------- For the one TME received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity. [[Page 70205]] Table 2--TME Received From September 1, 2015 to September 30, 2015 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected end Case No. Date received date for EPA Manufacturer/ importer Use Chemical identity review -------------------------------------------------------------------------------------------------------------------------------------------------------- T-15-0017............................ 9/21/2015 11/5/2015 NON-CBI................. Resin for coating (S) EHTM. formulation. -------------------------------------------------------------------------------------------------------------------------------------------------------- For the 25 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 3--NOCs Received From September 1, 2015 to September 30, 2015 ---------------------------------------------------------------------------------------------------------------- Projected date Case No. Received date of Chemical identity commencement ---------------------------------------------------------------------------------------------------------------- J-15-0017.............................. 9/11/2015 8/14/2015 (G) Modified organism. P-12-0078.............................. 9/15/2015 8/26/2015 (S) 1-Octanesulfonic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8- tridecafluoro-, barium salt (2:1). P-12-0437.............................. 9/3/2015 8/13/2015 (S) Quaternary ammonium compounds, bis (hydrogenated tallow alkyl) dimethyl, salts with tannins. P-13-0246.............................. 9/9/2015 8/12/2015 (G) Cobalt based polymer with fatty acids, and polyol. P-13-0309.............................. 9/24/2015 9/15/2015 (S) Alcohols, c9-11-branched, ethoxylated propoxylated. P-14-0142.............................. 9/24/2015 9/22/2015 (G) Ethoxylated Resin. P-14-0605.............................. 9/10/2015 9/10/2015 (G) Substituted cyclosiloxane. P-14-0738.............................. 9/3/2015 8/31/2015 (G) Polyalkylene ether alkyl phosphate polyurethane prepolymer. P-14-0809.............................. 9/29/2015 9/2/2015 (G) Depolymerized waste plastics. P-15-0036.............................. 9/1/2015 8/28/2015 (S) 2-Pyridinecarboxylic acid, 4,5,6- trichloro-. P-15-0152.............................. 9/24/2015 9/2/2015 (G) Urethane acrylate. P-15-0308.............................. 9/14/2015 8/31/2015 (G) Dicarboxylic acid, cycloaliphatic anhydride polymer with alkyldiol, hydroxy-[(oxoalkyl)oxy]alkyl ester. P-15-0311.............................. 9/18/2015 9/3/2015 (G) Triarylsulfonium salt with haloalkyl phosphate. P-15-0364.............................. 9/23/2015 9/13/2015 (G) Reaction mixture of copper, [29h,31h-phthalocyaninato(2-)- .kappa.n29,.kappa.n30,.kappa.n31,.kapp a.n32]-, (sp-4-1)- and metal, [substituted 29h,31h-phthalocyanine- .kappa.n29,.kappa.n30,.kappa.n31,lkapp a.n32]-. P-15-0365.............................. 9/2/2015 8/21/2015 (G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl methacrylate, polyether methacrylate alkyl ethers and substituted heteromonocycle, compds. with substituted alkyl alkanol. P-15-0390.............................. 9/10/2015 9/3/2015 (G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer with dialkyl carbopolycyclic ester, alkanediol and carbopolycyclic bis (substituted carbomonocycle). P-15-0396.............................. 9/24/2015 9/4/2015 (G) Alkylmethacrylate, polymer with alkenylbenzene, branched alkylmethacrylate, hydroxyalkylmethacrylate and acrylic acid, t-butyl alkaneperoxoic acid ester-initiated. P-15-0410.............................. 9/18/2015 8/18/2015 (S) 1,3-Butadiene, homopolymer, hydrogenated, 2-hydroxyethyl- terminated, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]carbama tes]. P-15-0411.............................. 9/7/2015 9/3/2015 (G) Fatty acid esters with polyols polyalkyl ethers. P-15-0427.............................. 9/24/2015 8/9/2015 (G) Substituted alkylene carbomonocycle, homopolymer, substituted polyol and mono alkyl ether-blocked polyol. P-15-0456.............................. 9/4/2015 8/21/2015 (G) Amine functional epoxy, organic acid salt. P-15-0466.............................. 9/16/2015 9/11/2015 (G) Acrylic acid polymer. P-15-0467.............................. 9/18/2015 9/14/2015 (S) 2-Oxepanone, polymer with 5-amino- 1,3,3-trimethylcyclohexanemethanamine, 1,2-ethanediol and 5-isocyanato-1- (isocyanatomethyl)-1,3,3- trimethylcyclohexane. P-15-0495.............................. 9/9/2015 8/30/2015 (G) Aromatic anhydride, polymer with alkane diol and alkane triol, 2- propenoate. P-15-0497.............................. 9/9/2015 8/30/2015 (G) Bisphenol an epoxy polymer with aromatic anhydride, mixed caprolactone acrylate and hydroxyethyl acrylate esters. ---------------------------------------------------------------------------------------------------------------- [[Page 70206]] Authority: 15 U.S.C. 2601 et seq. Dated: November 5, 2015. Pamela Myrick, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-28842 Filed 11-12-15; 8:45 am] BILLING CODE 6560-50-P
![Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices 70201
if delegated), for example, to: (1) under EPA review and the receipt of B. What should I consider as I prepare
Confirm compliance status of stationary notices of commencement (NOC) to my comments for EPA?
sources; (2) identify any stationary manufacture those chemicals. This 1. Submitting CBI. Do not submit this
sources not subject to the requirements document covers the period from information to EPA through
and identify stationary sources subject September 1, 2015 to September 30, regulations.gov or email. Clearly mark
to the regulations; and (3) ensure that 2015. the part or all of the information that
the stationary source control you claim to be CBI. For CBI
DATES: Comments identified by the
requirements are being achieved. All information in a disk or CD–ROM that
specific case number provided in this
information submitted to us pursuant to you mail to EPA, mark the outside of the
document, must be received on or
the recordkeeping and reporting disk or CD–ROM as CBI and then
before December 14, 2015.
requirements for which a claim of identify electronically within the disk or
confidentiality is made is safeguarded ADDRESSES: Submit your comments,
identified by docket identification (ID) CD–ROM the specific information that
according to the agency policies set is claimed as CBI. In addition to one
forth in 40 CFR part 2, subpart B. number EPA–HQ–OPPT–2015–0504,
and the specific PMN number or TME complete version of the comment that
Form Numbers: None. includes information claimed as CBI, a
Respondents/affected entities: number for the chemical related to your
comment, by one of the following copy of the comment that does not
Owners or operators of oil and natural contain the information claimed as CBI
gas facilities. methods:
• Federal eRulemaking Portal: http:// must be submitted for inclusion in the
Respondent’s obligation to respond: public docket. Information so marked
Mandatory (42 U.S.C. 7414). www.regulations.gov. Follow the online
instructions for submitting comments. will not be disclosed except in
Estimated number of respondents: accordance with procedures set forth in
780 (total). Do not submit electronically any
information you consider to be 40 CFR part 2.
Frequency of response: On occasion, 2. Tips for preparing your comments.
annually. Confidential Business Information (CBI)
or other information whose disclosure is When preparing and submitting your
Total estimated burden: 29,655 hours comments, see the commenting tips at
(per year). Burden is defined at 5 CFR restricted by statute.
• Mail: Document Control Office http://www.epa.gov/dockets/
1320.3(b). comments.html.
Total estimated cost: $6,503,000 (per (7407M), Office of Pollution Prevention
year), includes $5,121,000 annualized and Toxics (OPPT), Environmental II. What action is the agency taking?
capital or operation and maintenance Protection Agency, 1200 Pennsylvania
This document provides receipt and
costs. Ave. NW., Washington, DC 20460–0001.
status reports, which cover the period
Changes in Estimates: There is likely • Hand Delivery: To make special from September 1, 2015 to September
an increase in burden in this ICR arrangements for hand delivery or 30, 2015, and consists of the PMNs and
compared with the ICR currently delivery of boxed information, please TMEs both pending and/or expired, and
approved by OMB due to an anticipated follow the instructions at http:// the NOCs to manufacture a new
adjustment in the estimated number of www.epa.gov/dockets/contacts.html. chemical that the Agency has received
respondents to account for industry Additional instructions on under TSCA section 5 during this time
growth. In addition, there is likely an commenting or visiting the docket, period.
increase in cost in this ICR to take into along with more information about
account current labor rates. dockets generally, is available at III. What is the agency’s authority for
http://www.epa.gov/dockets. taking this action?
Dated: November 3, 2015.
Darcy O’Connor, FOR FURTHER INFORMATION CONTACT: For Under TSCA, 15 U.S.C. 2601 et seq.,
Acting Assistant Regional Administrator, technical information contact: Jim EPA classifies a chemical substance as
Office of Partnerships and Regulatory Rahai, IMD 7407M, Office of Pollution either an ‘‘existing’’ chemical or a
Assistance, Region 8. Prevention and Toxics, Environmental ‘‘new’’ chemical. Any chemical
[FR Doc. 2015–28836 Filed 11–12–15; 8:45 am] Protection Agency, 1200 Pennsylvania substance that is not on EPA’s TSCA
BILLING CODE 6560–50–P Ave. NW., Washington, DC 20460–0001; Inventory is classified as a ‘‘new
telephone number: (202) 564–8593; chemical,’’ while those that are on the
email address: rahai.jim@epa.gov. TSCA Inventory are classified as an
ENVIRONMENTAL PROTECTION For general information contact: The ‘‘existing chemical.’’ For more
AGENCY TSCA-Hotline, ABVI-Goodwill, 422 information about the TSCA Inventory
South Clinton Ave. Rochester, NY go to: http://www.epa.gov/opptintr/
[EPA–HQ–OPPT–2015–0504; FRL–9936–40] newchems/pubs/inventory.htm.
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@ Anyone who plans to manufacture or
Certain New Chemicals; Receipt and
epa.gov. import a new chemical substance for a
Status Information for September 2015
non-exempt commercial purpose is
SUPPLEMENTARY INFORMATION:
AGENCY: Environmental Protection required by TSCA section 5 to provide
Agency (EPA). I. General Information EPA with a PMN, before initiating the
ACTION: Notice. activity. Section 5(h)(1) of TSCA
A. Does this action apply to me?
authorizes EPA to allow persons, upon
SUMMARY: EPA is required under the This action is directed to the public application, to manufacture (includes
jstallworth on DSK7TPTVN1PROD with NOTICES
Toxic Substances Control Act (TSCA) to in general. As such, the Agency has not import) or process a new chemical
publish in the Federal Register a notice attempted to describe the specific substance, or a chemical substance
of receipt of a premanufacture notice entities that this action may apply. subject to a significant new use rule
(PMN); an application for a test Although others may be affected, this (SNUR) issued under TSCA section 5(a),
marketing exemption (TME), both action applies directly to the submitters for ‘‘test marketing’’ purposes, which is
pending and/or expired; and a periodic of the actions addressed in this referred to as a test marketing
status report on any new chemicals document. exemption, or TME. For more
VerDate Sep<11>2014 15:03 Nov 12, 2015 Jkt 238001 PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 E:\FR\FM\13NON1.SGM 13NON1](https://thefederalregister.org/doc/80_FR_70420/page/1.svg)
![70202 Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
information about the requirements IV. Receipt and Status Reports following information (to the extent that
applicable to a new chemical go to: such information is not claimed as CBI):
http://www.epa.gov/oppt/newchems. As used in each of the tables in this The EPA case number assigned to the
Under TSCA sections 5(d)(2) and unit, (S) indicates that the information
PMN; The date the PMN was received
5(d)(3), EPA is required to publish in in the table is the specific information
by EPA; the projected end date for
the Federal Register a notice of receipt provided by the submitter, and (G)
indicates that the information in the EPA’s review of the PMN; the
of a PMN or an application for a TME submitting manufacturer/importer; the
and to publish in the Federal Register table is generic information because the
specific information provided by the potential uses identified by the
periodic reports on the status of new
submitter was claimed as CBI. manufacturer/importer in the PMN; and
chemicals under review and the receipt
the chemical identity.
of NOCs to manufacture those For the 55 PMNs received by EPA
chemicals. during this period, Table 1 provides the
TABLE 1—PMNS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Projected
Date Manufacturer/
Case No. end date for Use(s) Chemical identity
received importer
EPA review
P–15–0703 ........... 8/26/2015 11/24/2015 CBI ....................... (G) Additive in toner ........... (G) Alkyl alkenoic acid, substituted
alkyl ester, polymer with alkyl
alkenoate and substituted alkyl
alkenoate compd. with alkyl alkyl
carbomonocyclic salt.
P–15–0713 ........... 9/1/2015 11/30/2015 CBI ....................... (G) Contained use .............. (G) Cellulose, polymer with sub-
stituted oxirane, 2-(diethylamino)
ethyl ether.
P–15–0714 ........... 9/1/2015 11/30/2015 Kemira ................. (G) Paper strength additive (G) Modified polyacrylamide.
P–15–0715 ........... 9/3/2015 12/2/2015 CBI ....................... (G) Additive for inks ............ (G) Oxirane, 2-ethyl-, homopolymer,
3-(5-carboxy-1,3-dihydro-,1,3-
dioxo-2H-isoindol-2-yl) alkyl ethers.
P–15–0717 ........... 9/3/2015 12/2/2015 CBI ....................... (G) Adhesive additive ......... (G) Triethoxysilylalkoxy polyalkylene
glycol urethane.
P–15–0718 ........... 9/3/2015 12/2/2015 CBI ....................... (G) Adhesive additive ......... (G) Triethoxysilylalkoxy polyalkylene
glycol urethane.
P–15–0719 ........... 9/3/2015 12/2/2015 CBI ....................... (G) Flame retardant syner- (S) Poly (1,4-diisopropyl benzene).
gist.
P–15–0720 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0721 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0722 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0723 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0724 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0725 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Polyurethane (G) Aliphatic polyester polyol.
prepolymer.
P–15–0726 ........... 9/4/2015 12/3/2015 CBI ....................... (S) Co-polymer for use in (G) Triethoxysilylalkoxy polyalkylene
adhesives and sealant glycol.
formulations.
P–15–0728 ........... 9/9/2015 12/8/2015 TAKASAGO ......... (S) Fragrance in household (S) Benzenemethanol, 3-ethoxy-4-hy-
products. droxy-.
P–15–0728 ........... 9/9/2015 12/8/2015 TAKASAGO ......... (S) Fragrance in a fine fra- (S) Benzenemethanol, 3-ethoxy-4-hy-
grance. droxy-.
P–15–0728 ........... 9/9/2015 12/8/2015 TAKASAGO ......... (S) Fragrance in consumer (S) Benzenemethanol, 3-ethoxy-4-hy-
products. droxy-.
P–15–0728 ........... 9/9/2015 12/8/2015 TAKASAGO ......... (S) Fragrance in other prod- (S) Benzenemethanol, 3-ethoxy-4-hy-
ucts. droxy-.
P–15–0730 ........... 9/10/2015 12/9/2015 CBI ....................... (G) Additive for paper and (G) Amphoteric polyacrylamide.
paperboard.
P–15–0731 ........... 9/10/2015 12/9/2015 CBI ....................... (G) Additive for paper and (G) Amphoteric polyacrylamide.
paperboard.
P–15–0733 ........... 9/10/2015 12/9/2015 Cadence Chem- (S) Coating for glass .......... (G) Alkane carboxylic acid, hydroxy,
ical Corporation. hydroxyalkyl-alkyl, polymer with
.alpha.-hydro-.omega.-
jstallworth on DSK7TPTVN1PROD with NOTICES
hydroxypoly(oxy-1,2-ethanediyl)
ether with alkyl-(hydroxyalkyl)-
alkanediol (X:1), .alpha.-hydro-
.omega.-hydroxypoly[oxy(alkyl-
alkyldiyl)] and alkylenebis
[isocyanatoalkane],-blocked.
P–15–0734 ........... 9/11/2015 12/10/2015 CBI ....................... (S) Wastewater Heavy Met- (G) Polymeric Sulfide.
als Removal.
VerDate Sep<11>2014 15:03 Nov 12, 2015 Jkt 238001 PO 00000 Frm 00019 Fmt 4703 Sfmt 4703 E:\FR\FM\13NON1.SGM 13NON1](https://thefederalregister.org/doc/80_FR_70420/page/2.svg)
![Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices 70203
TABLE 1—PMNS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015—Continued
Projected
Date Manufacturer/
Case No. end date for Use(s) Chemical identity
received importer
EPA review
P–15–0735 ........... 9/15/2015 12/14/2015 Cray Valley USA, (S) Adhesive Formulation ... (S) Hydrocarbons, C5-rich, polymers
LLC. with (6E)-7, 11-dimethyl-3-meth-
ylene-1,6,10-dodecatriene, 2-
methylbutene and methylstyrene.
P–15–0735 ........... 9/15/2015 12/14/2015 Cray Valley USA, (S) Rubber Formulation ...... (S) Hydrocarbons, C5-rich, polymers
LLC. with (6E)-7, 11-dimethyl-3-meth-
ylene-1,6,10-dodecatriene, 2-
methylbutene and methylstyrene.
P–15–0736 ........... 9/18/2015 12/17/2015 CBI ....................... (S) Industrial coating resin (G) Castor oil, polymer with sub-
for wood substances. stituted alkanoic acid, substituted
carbomonocycle, dialkyl sub-
stituted alkanediol and TDI, sub-
stituted alkanone-blocked.
P–15–0737 ........... 9/16/2015 12/15/2015 CBI ....................... (G) Intermediate ................. (G) Ammonium salts of phosphate
methacrylate.
P–15–0738 ........... 9/17/2015 12/16/2015 CBI ....................... (S) Injection molding addi- (G) Polysiloxane-polycarbonate co-
tive to improve the phys- polymer.
ical properties of plastic
parts.
P–15–0739 ........... 9/17/2015 12/16/2015 CBI ....................... (S) Component of Flexible (G) Epoxy Terminated Polymer.
Foam.
P–15–0740 ........... 9/17/2015 12/16/2015 Allnex USA, Inc ... (S) Digital printing applica- (G) Disubstituted alkanedioic acid,
tions. polymer with substituted
carbomonocycle, dialkyl carbonate,
alkanediol and (alkylimino) bis
[alkanol], acetate (salt).
P–15–0741 ........... 9/17/2015 12/16/2015 CBI ....................... (S) Mixture of modified ure- (G) Mixture of Modified urethane
thane polymers used as polymers.
a deflocculating and dis-
persing additive in indus-
trial coatings.
P–15–0742 ........... 9/17/2015 12/16/2015 CBI ....................... (G) Component for tire ....... (G) Modified Copolymer of Buta-1,3-
diene and Styrene.
P–15–0743 ........... 9/17/2015 12/16/2015 Eden Innovations (G) The liquid solution is an (G) Nano particle liquid concrete ad-
admixture that is used by mixture.
the concrete industry to
enhance product perform-
ance. It is mainly used to
increase the concrete’s
abrasion resistance, and
increase the compressive
and split tensile
strengths; see internal
comments.
P–15–0744 ........... 9/18/2015 12/17/2015 3 M Company ...... (G) Construction material ... (G) Naturally-occurring minerals, re-
action products with boron sodium
oxide (b4na2o7), hetero sub-
stituted alkyl acrylate polymer, ka-
olin and sodium silicate.
P–15–0745 ........... 9/18/2015 12/17/2015 3 M Company ...... (G) Construction material ... (G) Naturally-occurring minerals, re-
action products with boron sodium
oxide (b4na2o7), hetero sub-
stituted alkyl acrylate polymer, ka-
olin and sodium silicate.
P–15–0746 ........... 9/18/2015 12/17/2015 3 M Company ...... (G) Construction material ... (G) Naturally-occurring minerals, re-
action products with boron sodium
oxide (b4na2o7), hetero sub-
stituted alkyl acrylate polymer, ka-
olin and sodium silicate.
P–15–0747 ........... 9/18/2015 12/17/2015 3 M Company ...... (G) Construction material ... (G) Naturally-occurring minerals, re-
jstallworth on DSK7TPTVN1PROD with NOTICES
action products with boron sodium
oxide (b4na2o7), hetero sub-
stituted alkyl acrylate polymer, ka-
olin and sodium silicate.
P–15–0748 ........... 9/18/2015 12/17/2015 3 M Company ...... (G) Construction material ... (G) Naturally-occurring minerals, re-
action products with hetero sub-
stituted alkyl acrylate polymer, ka-
olin and sodium silicate.
VerDate Sep<11>2014 15:03 Nov 12, 2015 Jkt 238001 PO 00000 Frm 00020 Fmt 4703 Sfmt 4703 E:\FR\FM\13NON1.SGM 13NON1](https://thefederalregister.org/doc/80_FR_70420/page/3.svg)
![Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices 70205
TABLE 2—TME RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Projected
Date Manufacturer/
Case No. end date for Use Chemical identity
received importer
EPA review
T–15–0017 ........... 9/21/2015 11/5/2015 NON–CBI ............. Resin for coating formula- (S) EHTM.
tion.
For the 25 NOCs received by EPA The EPA case number assigned to the submitter in the NOC; and the chemical
during this period, Table 3 provides the NOC; the date the NOC was received by identity.
following information (to the extent that EPA; the projected date of
such information is not claimed as CBI): commencement provided by the
TABLE 3—NOCS RECEIVED FROM SEPTEMBER 1, 2015 TO SEPTEMBER 30, 2015
Projected
Received date of
Case No. Chemical identity
date commence-
ment
J–15–0017 ........................... 9/11/2015 8/14/2015 (G) Modified organism.
P–12–0078 .......................... 9/15/2015 8/26/2015 (S) 1-Octanesulfonic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-, barium salt
(2:1).
P–12–0437 .......................... 9/3/2015 8/13/2015 (S) Quaternary ammonium compounds, bis (hydrogenated tallow alkyl) di-
methyl, salts with tannins.
P–13–0246 .......................... 9/9/2015 8/12/2015 (G) Cobalt based polymer with fatty acids, and polyol.
P–13–0309 .......................... 9/24/2015 9/15/2015 (S) Alcohols, c9-11-branched, ethoxylated propoxylated.
P–14–0142 .......................... 9/24/2015 9/22/2015 (G) Ethoxylated Resin.
P–14–0605 .......................... 9/10/2015 9/10/2015 (G) Substituted cyclosiloxane.
P–14–0738 .......................... 9/3/2015 8/31/2015 (G) Polyalkylene ether alkyl phosphate polyurethane prepolymer.
P–14–0809 .......................... 9/29/2015 9/2/2015 (G) Depolymerized waste plastics.
P–15–0036 .......................... 9/1/2015 8/28/2015 (S) 2-Pyridinecarboxylic acid, 4,5,6-trichloro-.
P–15–0152 .......................... 9/24/2015 9/2/2015 (G) Urethane acrylate.
P–15–0308 .......................... 9/14/2015 8/31/2015 (G) Dicarboxylic acid, cycloaliphatic anhydride polymer with alkyldiol, hydroxy-
[(oxoalkyl)oxy]alkyl ester.
P–15–0311 .......................... 9/18/2015 9/3/2015 (G) Triarylsulfonium salt with haloalkyl phosphate.
P–15–0364 .......................... 9/23/2015 9/13/2015 (G) Reaction mixture of copper, [29h,31h-phthalocyaninato(2-)-
.kappa.n29,.kappa.n30,.kappa.n31,.kappa.n32]-, (sp-4–1)- and metal, [sub-
stituted 29h,31h-phthalocyanine-.kappa.n29,.kappa.n30,.kappa.
n31,lkappa.n32]-.
P–15–0365 .......................... 9/2/2015 8/21/2015 (G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl methacrylate,
polyether methacrylate alkyl ethers and substituted heteromonocycle,
compds. with substituted alkyl alkanol.
P–15–0390 .......................... 9/10/2015 9/3/2015 (G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer with
dialkyl carbopolycyclic ester, alkanediol and carbopolycyclic bis (substituted
carbomonocycle).
P–15–0396 .......................... 9/24/2015 9/4/2015 (G) Alkylmethacrylate, polymer with alkenylbenzene, branched
alkylmethacrylate, hydroxyalkylmethacrylate and acrylic acid, t-butyl
alkaneperoxoic acid ester-initiated.
P–15–0410 .......................... 9/18/2015 8/18/2015 (S) 1,3-Butadiene, homopolymer, hydrogenated, 2-hydroxyethyl-terminated,
bis[n-[4-[(4-isocyanatophenyl)methyl]phenyl]carbamates].
P–15–0411 .......................... 9/7/2015 9/3/2015 (G) Fatty acid esters with polyols polyalkyl ethers.
P–15–0427 .......................... 9/24/2015 8/9/2015 (G) Substituted alkylene carbomonocycle, homopolymer, substituted polyol and
mono alkyl ether-blocked polyol.
P–15–0456 .......................... 9/4/2015 8/21/2015 (G) Amine functional epoxy, organic acid salt.
P–15–0466 .......................... 9/16/2015 9/11/2015 (G) Acrylic acid polymer.
P–15–0467 .......................... 9/18/2015 9/14/2015 (S) 2-Oxepanone, polymer with 5-amino-1,3,3-
trimethylcyclohexanemethanamine, 1,2-ethanediol and 5-isocyanato-1-
(isocyanatomethyl)-1,3,3-trimethylcyclohexane.
P–15–0495 .......................... 9/9/2015 8/30/2015 (G) Aromatic anhydride, polymer with alkane diol and alkane triol, 2-
propenoate.
P–15–0497 .......................... 9/9/2015 8/30/2015 (G) Bisphenol an epoxy polymer with aromatic anhydride, mixed caprolactone
acrylate and hydroxyethyl acrylate esters.
jstallworth on DSK7TPTVN1PROD with NOTICES
VerDate Sep<11>2014 15:03 Nov 12, 2015 Jkt 238001 PO 00000 Frm 00022 Fmt 4703 Sfmt 4703 E:\FR\FM\13NON1.SGM 13NON1](https://thefederalregister.org/doc/80_FR_70420/page/5.svg)
![70206 Federal Register / Vol. 80, No. 219 / Friday, November 13, 2015 / Notices
Authority: 15 U.S.C. 2601 et seq. The U.S. Department of Army’s Corps I. General Information
Dated: November 5, 2015. of Engineers and the U.S. Department of
A. Does this action apply to me?
Pamela Myrick, Agriculture’s Forest Service are joint
lead agencies for the above project. This action is directed to the public
Acting Director, Information Management
EIS No. 20150318, Final, USFS, ID, in general. Although this action may be
Division, Office of Pollution Prevention and
Toxics. Salmon-Challis National Forest of particular interest to persons who
Invasive Plant Treatment, Review produce or use pesticides, the Agency
[FR Doc. 2015–28842 Filed 11–12–15; 8:45 am]
Period Ends: 01/04/2016, Contact: has not attempted to describe all the
BILLING CODE 6560–50–P
Jennifer Purvine 208–879–4162 specific entities that may be affected by
this action.
Amended Notices:
ENVIRONMENTAL PROTECTION EIS No. 20150278, Draft, USACE, GA, B. How can I get copies of this document
AGENCY Update of the Water Control Manual and other related information?
[ER–FRL–9023–9] for the Apalachicola-Chattahoochee- The docket for this action, identified
Flint River Basin in Alabama, Florida, by docket identification (ID) number
Environmental Impact Statements; and Georgia and Water Supply EPA–HQ–OPP–2015–0634, is available
Notice of Availability Responsible Storage Assessment, Comment Period at http://www.regulations.gov or at the
Agency: Office of Federal Activities, Ends: 01/15/2016, Contact: Lewis C. Office of Pesticide Programs Regulatory
General Information (202) 564–7146 or Sumner 251–694–3857 Public Docket (OPP Docket) in the
http://www2.epa.gov/nepa Revision to FR Notice Published 10/ Environmental Protection Agency
09/2015; Extending Comment Period Docket Center (EPA/DC), West William
Weekly receipt of Environmental Impact from 12/01/2015 to 01/15/2016 Jefferson Clinton Bldg., Rm. 3334, 1301
Statements (EISs) Constitution Ave. NW., Washington, DC
Filed 11/02/2015 Through 11/06/2015 Dated: November 9, 2015.
Dawn Roberts, 20460–0001. The Public Reading Room
Pursuant to 40 CFR 1506.9. is open from 8:30 a.m. to 4:30 p.m.,
Notice: Section 309(a) of the Clean Air Management Analyst, NEPA Compliance
Division, Office of Federal Activities. Monday through Friday, excluding legal
Act requires that EPA make public its holidays. The telephone number for the
comments on EISs issued by other [FR Doc. 2015–28890 Filed 11–12–15; 8:45 am]
Public Reading Room is (202) 566–1744,
Federal agencies. EPA’s comment letters BILLING CODE 6560–50–P
and the telephone number for the OPP
on EISs are available at: https:// Docket is (703) 305–5805. Please review
www.cdxnodengn.epa.gov/cdx-nepa- the visitor instructions and additional
public/action/eis/search. ENVIRONMENTAL PROTECTION
AGENCY information about the docket available
EIS No. 20150312, Draft, FRA, 00, at http://www.epa.gov/dockets.
Northeast Corridor (NEC) FUTURE [EPA–HQ–OPP–2015–0634; FRL–9934–46] Complete lists of registrations
Program Tier 1, Comment Period canceled for non-payment of the
Ends: 01/30/2016, Contact: Rebecca Cancellation of Pesticides for Non- maintenance fee are also available for
Reyes-Alicea 212–668–2282 Payment of Year 2015 Registration reference in the OPP Docket.
EIS No. 20150313, Draft, NRC, MI, Maintenance Fees; Summary of Orders
Issued II. Background
Generic—License Renewal of Nuclear
Plants: Supplement 56 Regarding Section 4(i)(5) of FIFRA (7 U.S.C.
AGENCY: Environmental Protection
Fermi 2 Nuclear Power Plant, 136a–1(i)(5)) requires that all pesticide
Agency (EPA).
Comment Period Ends: 12/28/2015, registrants pay an annual registration
ACTION: Notice. maintenance fee, due by January 15 of
Contact: Elaine M. Keegan 301–415–
8517 SUMMARY: Under the Federal Insecticide, each year, to keep their registrations in
Fungicide, and Rodenticide Act effect. This requirement applies to all
EIS No. 20150314, Draft, NOAA, WA,
(FIFRA), the payment of an annual registrations granted under FIFRA
Analyze Impacts of NOAA’s National
maintenance fee is required to keep section 3 (7 U.S.C. 136a) as well as those
Marine Fisheries Service Proposed
pesticide registrations in effect. The fee granted under FIFRA section 24(c) (7
4(d) Determination under Limit 6 for
due last January 15, 2015, has gone U.S.C. 136v(c)) to meet special local
Five Early Winter Steelhead Hatchery
unpaid for the 236 registrations needs. Registrations for which the fee is
Programs in Puget Sound, Comment
identified in this document. If the fee is not paid are subject to cancellation by
Period Ends: 12/28/2015, Contact:
not paid, the EPA Administrator may order and without a hearing.
Steve Leider 360–753–4650 Under FIFRA, the EPA Administrator
EIS No. 20150315, Final, BLM, CA, cancel these registrations by order and
may reduce or waive maintenance fees
Desert Renewable Energy without a hearing; orders to cancel these
for minor agricultural use pesticides
Conservation Plan Proposed Land Use registrations have been issued.
when it is determined that the fee
Plan Amendment, Review Period FOR FURTHER INFORMATION CONTACT: would be likely to cause significant
Ends: 12/14/2015, Contact: Vicki Mick Yanchulis, Information impact on the availability of the
Campbell 916–978–4401 Technology and Resources Management pesticide for the use.
EIS No. 20150316, Final, DOE, OK, Division (7502P), Office of Pesticide In fiscal year 2015, maintenance fees
Plains and Eastern Clean Line Programs, Environmental Protection were collected in one billing cycle. In
Transmission Line Project, Review Agency, 1200 Pennsylvania Ave. NW., late October of 2014, all holders of
jstallworth on DSK7TPTVN1PROD with NOTICES
Period Ends: 12/14/2015, Contact: Dr. Washington, DC 20460–0001; telephone either FIFRA section 3 registrations or
Jane Summerson 505–845–4091 number: (703) 347–0237; email address: FIFRA section 24(c) registrations were
EIS No. 20150317, Final, USACE, USFS, yanchulis.michael@epa.gov. sent lists of their active registrations,
MN, NorthMet Mining Project and Product-specific status inquiries may along with forms and instructions for
Land Exchange, Review Period Ends: be made by calling toll-free, 1–800–444– responding. They were asked to identify
12/14/2015, Contact: Douglas Bruner 7255. which of their registrations they wished
651–290–5378 SUPPLEMENTARY INFORMATION: to maintain in effect, and to calculate
VerDate Sep<11>2014 15:03 Nov 12, 2015 Jkt 238001 PO 00000 Frm 00023 Fmt 4703 Sfmt 4703 E:\FR\FM\13NON1.SGM 13NON1](https://thefederalregister.org/doc/80_FR_70420/page/6.svg)
Document Created: 2018-03-01 11:22:37
Document Modified: 2018-03-01 11:22:37
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before December 14, 2015. | |
| Contact | For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
| FR Citation | 80 FR 70201 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR