81 FR 18572 - Foreign-Trade Zone (FTZ) 87-Lake Charles, Louisiana; Notification of Proposed Production Activity; Sasol Chemicals (USA), LLC, Subzone 87E, (Assembly of Ethylene Distillation/Rectification Plant and Ethane Cracker/Reaction Unit; Production of Polyethylene) Westlake and Sulphur, Louisiana
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board Federal Register Volume 81, Issue 62 (March 31, 2016)
Foreign-Trade Zones Board
Federal Register Volume 81, Issue 62 (March 31, 2016)
| Page Range | 18572-18573 | |
| FR Document | 2016-07315 |
[Federal Register Volume 81, Number 62 (Thursday, March 31, 2016)] [Notices] [Pages 18572-18573] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-07315] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-15-2016] Foreign-Trade Zone (FTZ) 87--Lake Charles, Louisiana; Notification of Proposed Production Activity; Sasol Chemicals (USA), LLC, Subzone 87E, (Assembly of Ethylene Distillation/Rectification Plant and Ethane Cracker/Reaction Unit; Production of Polyethylene) Westlake and Sulphur, Louisiana Sasol Chemicals (USA), LLC (Sasol) submitted a notification of proposed production activity to the FTZ Board for its sites within Subzone 87E in Westlake and Sulphur, Louisiana. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on March 17, 2016. Sasol is requesting FTZ authority for the assembly and installation of an ethylene distillation/rectification plant and ethane cracker/ reaction unit(s). Sasol is also requesting to produce polyethylene from foreign-sourced ethane once the construction is completed. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials/components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could allow Sasol to choose the duty rates during customs entry procedures that apply to the ethylene distillation/rectification plant and ethane cracker/reaction unit(s) (free and 4.2%) and the finished polyethylene (6.5%) for the foreign- status inputs noted below. The components and materials from abroad for the assembly and installation of the ethylene distillation/rectification plant and ethane cracker/reaction unit include: Ethane; paint; cellular polyurethane foam insulation; plastic stacking corner fixtures for stacking pallets; plastic cable guides; Teflon back-up rings; fiber reinforced plastic washers; plastic gaskets; plastic washers; Teflon encapsulated gaskets; vulcanized rubber hoses; vulcanized, cellular rubber rings; neoprene seals; neoprene rubber gaskets; rubber feed- filtrate hoses reinforced or otherwise combined with textile materials without fittings/measurement hoses with fittings/diaphragms/vibration control bushings/seals/containers, with or without their closures, of a kind used for the packing and transporting of merchandise/sealing frame diaphragms; textile filter bags; ceramic insulation; refractory materials for cracking furnaces; center precast walls; fiber glass filters non-woven fabric; fiber glass filters fabric woven; carbon steel flatbar for toeplates; seamless iron or steel pipes; seamless stainless steel pipe (boiler tubes); seamless alloy steel pipe (exchanger, boiler tubes); submerged arc welded line pipe; longitudinally welded line pipe; welded stainless steel pipe; welded alloy steel pipe; welded carbon steel pipe; welded stainless steel pipe; pipe fittings: carbon steel threaded plugs/carbon steel unions (ductile fittings, non-threaded)/stainless steel flanges/stainless steel threaded elbows and bends/stainless steel concentric reducers/ stainless steel elbows/butt welding fittings/stainless steel sleeves (couplings)/stainless steel weldolets/stainless steel nipples/iron or steel flanges/iron or steel threaded elbow and bends/iron or steel threaded sleeves (couplings)/iron or nonalloy steel butt welding fittings with an inside diameter of less than 360 millimeters/alloy steel butt welding fittings with an inside diameter of less than 360 millimeters/butt welding fittings of all metallurgies other than stainless steel with and inside diameter of 360 millimeters or more/ butt welding fittings of all metallurgies other than stainless steel-- nipples; pumps (venturi tubes); steel beams, columns, posts, platforms and ladders and steel assemblies for use in steel structures; pipe rack modules (steel structures with piping); steel tanks for liquid; steel fume collectors for holding gas; stainless steel belts (superbelts); galvanized carbon steel wire mesh screen; iron or steel machine screws; iron or steel studs; iron or steel nuts; stainless steel threaded rods; steel washers; cotter pins (split pins); coil spring pins; steel hairsprings; steel assemblies for mine air heaters; steel wires; electrical grounding rods; spring hangers for supporting pipe in steel structures; aluminum connecting fishplates (splice bar for connecting aluminum beams or tracks); aluminum ladders; steel wrenches, non- adjustable; steel wrenches, adjustable; socket wrenches; carbon steel threaded studs; stainless steel grating discs (with assembly hardware); fabricated steel brackets; non-iron or steel attachment brackets; boilers with steam production exceeding 45 tons per hour; boilers with steam production not exceeding 45 tons per hour; condensate and boiler feedwater system parts; steam boiler heat exchangers; parts for steam boilers; steam turbines (compressor driver); spare rotors for steam turbine in steel container; high pressure deck pumps; pitch pumps; rotary positive displacement pumps; centrifugal water pumps; feed pumps, cloth wash pumps; eductors (acts as a pump with no moving parts); pump parts; vacuum station pumps; exhaust fans; induced draft fans; propylene refrigeration compressors; ethylene refrigeration compressors; screw compressors; pellet transfer air compressors; nitrogen compressors; cracked gas compressors; decoke air compressors; spare compressor rotor assemblies in steel container; parts for fans and blowers; parts for compressors; parts for pumps; flare systems; dry flare superheater condenser pots; furnace parts; cracked gas driers; depropanizer column (distillation process to remove propane); debutanizer column (distillation process to remove butane); de- ethanizer column (distillation process to remove ethane); quench water towers; coolers (shell and tube heat exchangers); heaters (shell and tube heat exchangers); air cooled (fin-fan) heat exchangers; brazed aluminum plate-fin heat exchangers; reactors; ethane feed systems; parts for quench water towers (fabricated center support beams with hardware and carbon steel lateral pipe distributors with hardware); heat exchanger parts; reactor parts; sludge paddles; carbon steel large drums, suspect condensate flash drums; strainers; filters; carbon steel drums for hydro carbon vapor & liquid separation; filter elements; parts for filtering machinery; liquid propane ethane stripper feed chiller parts; truck weighing scales; down flow booths with temperature control cooling coils and integrated safety shower units; lifting devices; aggregate feeder conveyors; mixer feed screw conveyors; truck and railcar loading arms; rock breaker boom systems; lime silo bin vent assemblies; special tools for rock breakers; self-feeder lid assemblies; pulverizer mills to grind sample material; millmate assemblies; jaw crushers; colloidal mixing systems; overflow chutes; mounting brackets; flotation tank cell components, disassembled for shipping; washer plates; nut plates; extruders; static mixers; air electromechanical self-contained electric motors; gas motor driven machines; ammonia storage package; accumulators; parts for lime mixers; pressure reducing valves; hand-operated relief valves; non-iron or steel [[Page 18573]] hand operated valves; hand-operated copper valves; hand-operated steel valves; hydraulic and pneumatic actuated valves; copper valve parts; steel valve parts; iron or steel slide plates; spiral wound gaskets, mixture of metallic material; collector seals; electric actuator of an output exceeding 37.5 watts but not exceeding 74.6 watts; gear motors; electric motors of an output exceeding 74.6 watts but not exceeding 735 watts; motors of an output exceeding 750 watts but not exceeding 75 kilo watts; motors exceeding 750 watts but not exceeding 14.92 kilo watts; motors exceeding 75 kilo watts but under 149.2 kilo watts; motors not exceeding 373 kilo watts; motors of 149.2 kilo watts or more but not exceeding 150 kilo watts; rock breaker hydraulic power units with a power output not exceeding 50 watts; speed drive controllers for electric motors; bolt heaters; electric mercury retorts; visual sensors; automatic fuses; solenoid operated valve open/close switch boxes; safety relays; on/off electrical switches; limit switches; electrical terminals; electrical splices and couplings; junction boxes including support switch boxes; auxiliary panels; I-line distribution panels; local control panels; variable bleed solenoid valve box sets; parts of machines, thermocouples; printed circuit assemblies; cables for emergency switches; sea containers; pyrometers; flow meters (instruments for measuring liquid flow); liquid level sensors; level housing assemblies; pressure transmitters; pressure gauges; level transmitters, parts & accessories; sensors; gas chromatographs; electrical turbidity transmitters and sensors; turbidity transmitters and sensors with exposure meters; integrated turbines compressor control system designed for use in 6, 12 or 24 volt systems; local gauge board with bolts, nuts & washers (duty rates range from free to 9%). The request indicates that alloy steel pipes (diameter exceeding 114.3 mm but not exceeding 406.4 mm), HTSUS 7304.19.5050; butt welding fittings, HTSUS 7307.23.0000; iron or non-alloy steel pipes (external diameter exceeding 609.6 mm), HTSUS 7305.11.1060; iron or non-alloy steel pipes (external diameter exceeding 406.4 mm but not exceeding 609.6 mm), HTSUS 7305.11.1030; welded iron or non-alloy steel tubes, HTSUS 7305.31.4000; iron or non-alloy line pipes (outside diameter exceeding 114.3 mm), HTSUS 7306.19.1050; welded iron or non-alloy steel pipes (external diameter exceeding 406.4 mm but not exceeding 609.6 mm), HTSUS 7305.12.1030; line pipes (external diameter exceeding 609.6 mm), HTSUS 7305.19.1060; and, welded stainless steel line pipes (outside diameter not exceeding 114.3 mm), HTSUS 7306.19.1010, are subject to antidumping/countervailing duty (AD/CVD) orders. The FTZ Board's regulations (15 CFR 400.14(e)) require that merchandise subject to AD/CVD orders be admitted to the zone in privileged foreign status (19 CFR 146.41). Additionally, production of polyethylene under FTZ procedures could exempt Sasol from customs duty payments on the foreign-status ethane (duty free) used in export production. On its domestic sales, Sasol would be able to choose the duty rate during customs entry procedures that applies to polyethylene (duty rate 6.5%) for the foreign-status ethane. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board's Executive Secretary at the address below. The closing period for their receipt is May 10, 2016. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230-0002, and in the ``Reading Room'' section of the FTZ Board's Web site, which is accessible via www.trade.gov/ftz. For further information, contact Diane Finver at [email protected] or (202) 482-1367. Dated: March 25, 2016. Andrew McGilvray, Executive Secretary. [FR Doc. 2016-07315 Filed 3-30-16; 8:45 am] BILLING CODE 3510-DS-P
![18572 Federal Register / Vol. 81, No. 62 / Thursday, March 31, 2016 / Notices
Dated: March 28, 2016. filtrate hoses reinforced or otherwise exceeding 45 tons per hour; boilers with
Glenna Mickelson, combined with textile materials without steam production not exceeding 45 tons
Management Analyst, Office of the Chief fittings/measurement hoses with per hour; condensate and boiler
Information Officer. fittings/diaphragms/vibration control feedwater system parts; steam boiler
[FR Doc. 2016–07298 Filed 3–30–16; 8:45 am] bushings/seals/containers, with or heat exchangers; parts for steam boilers;
BILLING CODE 3510–07–P without their closures, of a kind used steam turbines (compressor driver);
for the packing and transporting of spare rotors for steam turbine in steel
merchandise/sealing frame diaphragms; container; high pressure deck pumps;
DEPARTMENT OF COMMERCE textile filter bags; ceramic insulation; pitch pumps; rotary positive
refractory materials for cracking displacement pumps; centrifugal water
Foreign-Trade Zones Board furnaces; center precast walls; fiber pumps; feed pumps, cloth wash pumps;
[B–15–2016] glass filters non-woven fabric; fiber glass eductors (acts as a pump with no
filters fabric woven; carbon steel flatbar moving parts); pump parts; vacuum
Foreign-Trade Zone (FTZ) 87—Lake for toeplates; seamless iron or steel station pumps; exhaust fans; induced
Charles, Louisiana; Notification of pipes; seamless stainless steel pipe draft fans; propylene refrigeration
Proposed Production Activity; Sasol (boiler tubes); seamless alloy steel pipe compressors; ethylene refrigeration
Chemicals (USA), LLC, Subzone 87E, (exchanger, boiler tubes); submerged arc compressors; screw compressors; pellet
(Assembly of Ethylene Distillation/ welded line pipe; longitudinally welded transfer air compressors; nitrogen
Rectification Plant and Ethane Cracker/ line pipe; welded stainless steel pipe; compressors; cracked gas compressors;
Reaction Unit; Production of welded alloy steel pipe; welded carbon decoke air compressors; spare
Polyethylene) Westlake and Sulphur, steel pipe; welded stainless steel pipe; compressor rotor assemblies in steel
Louisiana pipe fittings: carbon steel threaded container; parts for fans and blowers;
Sasol Chemicals (USA), LLC (Sasol) plugs/carbon steel unions (ductile parts for compressors; parts for pumps;
submitted a notification of proposed fittings, non-threaded)/stainless steel flare systems; dry flare superheater
production activity to the FTZ Board for flanges/stainless steel threaded elbows condenser pots; furnace parts; cracked
its sites within Subzone 87E in Westlake and bends/stainless steel concentric gas driers; depropanizer column
and Sulphur, Louisiana. The reducers/stainless steel elbows/butt (distillation process to remove propane);
notification conforming to the welding fittings/stainless steel sleeves debutanizer column (distillation process
requirements of the regulations of the (couplings)/stainless steel weldolets/ to remove butane); de-ethanizer column
FTZ Board (15 CFR 400.22) was stainless steel nipples/iron or steel (distillation process to remove ethane);
received on March 17, 2016. flanges/iron or steel threaded elbow and quench water towers; coolers (shell and
Sasol is requesting FTZ authority for bends/iron or steel threaded sleeves tube heat exchangers); heaters (shell and
the assembly and installation of an (couplings)/iron or nonalloy steel butt tube heat exchangers); air cooled (fin-
ethylene distillation/rectification plant welding fittings with an inside diameter fan) heat exchangers; brazed aluminum
and ethane cracker/reaction unit(s). of less than 360 millimeters/alloy steel plate-fin heat exchangers; reactors;
Sasol is also requesting to produce butt welding fittings with an inside ethane feed systems; parts for quench
polyethylene from foreign-sourced diameter of less than 360 millimeters/ water towers (fabricated center support
ethane once the construction is butt welding fittings of all metallurgies beams with hardware and carbon steel
completed. Pursuant to 15 CFR other than stainless steel with and lateral pipe distributors with hardware);
400.14(b), FTZ activity would be limited inside diameter of 360 millimeters or heat exchanger parts; reactor parts;
to the specific foreign-status materials/ more/butt welding fittings of all sludge paddles; carbon steel large
components and specific finished metallurgies other than stainless steel— drums, suspect condensate flash drums;
products described in the submitted nipples; pumps (venturi tubes); steel strainers; filters; carbon steel drums for
notification (as described below) and beams, columns, posts, platforms and hydro carbon vapor & liquid separation;
subsequently authorized by the FTZ ladders and steel assemblies for use in filter elements; parts for filtering
Board. steel structures; pipe rack modules machinery; liquid propane ethane
Production under FTZ procedures (steel structures with piping); steel tanks stripper feed chiller parts; truck
could allow Sasol to choose the duty for liquid; steel fume collectors for weighing scales; down flow booths with
rates during customs entry procedures holding gas; stainless steel belts temperature control cooling coils and
that apply to the ethylene distillation/ (superbelts); galvanized carbon steel integrated safety shower units; lifting
rectification plant and ethane cracker/ wire mesh screen; iron or steel machine devices; aggregate feeder conveyors;
reaction unit(s) (free and 4.2%) and the screws; iron or steel studs; iron or steel mixer feed screw conveyors; truck and
finished polyethylene (6.5%) for the nuts; stainless steel threaded rods; steel railcar loading arms; rock breaker boom
foreign-status inputs noted below. washers; cotter pins (split pins); coil systems; lime silo bin vent assemblies;
The components and materials from spring pins; steel hairsprings; steel special tools for rock breakers; self-
abroad for the assembly and installation assemblies for mine air heaters; steel feeder lid assemblies; pulverizer mills to
of the ethylene distillation/rectification wires; electrical grounding rods; spring grind sample material; millmate
plant and ethane cracker/reaction unit hangers for supporting pipe in steel assemblies; jaw crushers; colloidal
include: Ethane; paint; cellular structures; aluminum connecting mixing systems; overflow chutes;
polyurethane foam insulation; plastic fishplates (splice bar for connecting mounting brackets; flotation tank cell
mstockstill on DSK4VPTVN1PROD with NOTICES
stacking corner fixtures for stacking aluminum beams or tracks); aluminum components, disassembled for shipping;
pallets; plastic cable guides; Teflon ladders; steel wrenches, non-adjustable; washer plates; nut plates; extruders;
back-up rings; fiber reinforced plastic steel wrenches, adjustable; socket static mixers; air electromechanical self-
washers; plastic gaskets; plastic wrenches; carbon steel threaded studs; contained electric motors; gas motor
washers; Teflon encapsulated gaskets; stainless steel grating discs (with driven machines; ammonia storage
vulcanized rubber hoses; vulcanized, assembly hardware); fabricated steel package; accumulators; parts for lime
cellular rubber rings; neoprene seals; brackets; non-iron or steel attachment mixers; pressure reducing valves; hand-
neoprene rubber gaskets; rubber feed- brackets; boilers with steam production operated relief valves; non-iron or steel
VerDate Sep<11>2014 19:09 Mar 30, 2016 Jkt 238001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\31MRN1.SGM 31MRN1](https://thefederalregister.org/doc/81_FR_18634/page/1.svg)
![Federal Register / Vol. 81, No. 62 / Thursday, March 31, 2016 / Notices 18573
hand operated valves; hand-operated mm), HTSUS 7305.19.1060; and, comment (81 FR 4249–4250, January 26,
copper valves; hand-operated steel welded stainless steel line pipes 2016). The FTZ staff examiner reviewed
valves; hydraulic and pneumatic (outside diameter not exceeding 114.3 the application and determined that it
actuated valves; copper valve parts; mm), HTSUS 7306.19.1010, are subject meets the criteria for approval.
steel valve parts; iron or steel slide to antidumping/countervailing duty Pursuant to the authority delegated to
plates; spiral wound gaskets, mixture of (AD/CVD) orders. The FTZ Board’s the FTZ Board’s Executive Secretary (15
metallic material; collector seals; regulations (15 CFR 400.14(e)) require CFR 400.36(f)), the application to
electric actuator of an output exceeding that merchandise subject to AD/CVD establish Subzone 287A is approved,
37.5 watts but not exceeding 74.6 watts; orders be admitted to the zone in subject to the FTZ Act and the Board’s
gear motors; electric motors of an output privileged foreign status (19 CFR regulations, including Section 400.13,
exceeding 74.6 watts but not exceeding 146.41). and further subject to FTZ 287’s 2,000-
735 watts; motors of an output Additionally, production of acre activation limit.
exceeding 750 watts but not exceeding polyethylene under FTZ procedures Dated: March 25, 2016.
75 kilo watts; motors exceeding 750 could exempt Sasol from customs duty Andrew McGilvray,
watts but not exceeding 14.92 kilo payments on the foreign-status ethane
Executive Secretary.
watts; motors exceeding 75 kilo watts (duty free) used in export production.
[FR Doc. 2016–07317 Filed 3–30–16; 8:45 am]
but under 149.2 kilo watts; motors not On its domestic sales, Sasol would be
BILLING CODE 3510–DS–P
exceeding 373 kilo watts; motors of able to choose the duty rate during
149.2 kilo watts or more but not customs entry procedures that applies to
exceeding 150 kilo watts; rock breaker polyethylene (duty rate 6.5%) for the
DEPARTMENT OF COMMERCE
hydraulic power units with a power foreign-status ethane.
output not exceeding 50 watts; speed Public comment is invited from International Trade Administration
drive controllers for electric motors; bolt interested parties. Submissions shall be
heaters; electric mercury retorts; visual addressed to the FTZ Board’s Executive [C–570–041]
sensors; automatic fuses; solenoid Secretary at the address below. The
Truck and Bus Tires From the People’s
operated valve open/close switch boxes; closing period for their receipt is May
Republic of China: Postponement of
safety relays; on/off electrical switches; 10, 2016.
Preliminary Determination in the
limit switches; electrical terminals; A copy of the notification will be
Countervailing Duty Investigation
electrical splices and couplings; available for public inspection at the
junction boxes including support switch Office of the Executive Secretary, AGENCY: Enforcement and Compliance,
boxes; auxiliary panels; I-line Foreign-Trade Zones Board, Room International Trade Administration,
distribution panels; local control panels; 21013, U.S. Department of Commerce, Department of Commerce.
variable bleed solenoid valve box sets; 1401 Constitution Avenue NW., FOR FURTHER INFORMATION CONTACT:
parts of machines, thermocouples; Washington, DC 20230–0002, and in the Jennifer Shore or Mark Kennedy,
printed circuit assemblies; cables for ‘‘Reading Room’’ section of the FTZ AD/CVD Operations, Office I,
emergency switches; sea containers; Board’s Web site, which is accessible Enforcement and Compliance,
pyrometers; flow meters (instruments via www.trade.gov/ftz. International Trade Administration,
for measuring liquid flow); liquid level For further information, contact Diane U.S. Department of Commerce, 1401
sensors; level housing assemblies; Finver at Diane.Finver@trade.gov or Constitution Avenue NW., Washington,
pressure transmitters; pressure gauges; (202) 482–1367. DC 20230; telephone: (202) 482–2778 or
level transmitters, parts & accessories; Dated: March 25, 2016. (202) 482–7883, respectively.
sensors; gas chromatographs; electrical Andrew McGilvray, SUPPLEMENTARY INFORMATION:
turbidity transmitters and sensors;
Executive Secretary.
turbidity transmitters and sensors with Background
[FR Doc. 2016–07315 Filed 3–30–16; 8:45 am]
exposure meters; integrated turbines On February 18, 2016, the Department
compressor control system designed for BILLING CODE 3510–DS–P
of Commerce (the Department) initiated
use in 6, 12 or 24 volt systems; local a countervailing duty investigation on
gauge board with bolts, nuts & washers Truck and Bus Tires From the People’s
DEPARTMENT OF COMMERCE
(duty rates range from free to 9%). Republic of China (China).1 Currently,
The request indicates that alloy steel Foreign-Trade Zones Board the preliminary determination is due no
pipes (diameter exceeding 114.3 mm but later than April 25, 2016.2
not exceeding 406.4 mm), HTSUS [S–4–2016]
7304.19.5050; butt welding fittings, Postponement of the Preliminary
Approval of Subzone Status, FTZ Determination
HTSUS 7307.23.0000; iron or non-alloy Networks, Inc., Olive Branch, MS
steel pipes (external diameter exceeding Section 703(b)(1) of the Tariff Act of
609.6 mm), HTSUS 7305.11.1060; iron On January 19, 2016, the Executive 1930, as amended (the Act), requires the
or non-alloy steel pipes (external Secretary of the Foreign-Trade Zones Department to issue the preliminary
diameter exceeding 406.4 mm but not (FTZ) Board docketed an application determination in a countervailing duty
exceeding 609.6 mm), HTSUS submitted by Tunica County,
7305.11.1030; welded iron or non-alloy Mississippi, grantee of FTZ 287, 1 See Truck and Bus Tires From the People’s
Republic of China: Initiation of Countervailing Duty
mstockstill on DSK4VPTVN1PROD with NOTICES
steel tubes, HTSUS 7305.31.4000; iron requesting subzone status subject to the
Investigation, 81 FR 9428 (February 25, 2016).
or non-alloy line pipes (outside existing activation limit of FTZ 287 on 2 The actual deadline is April 23, 2016, which is
diameter exceeding 114.3 mm), HTSUS behalf of FTZ Networks, Inc., in Olive a Saturday. Department practice dictates that where
7306.19.1050; welded iron or non-alloy Branch, Mississippi. a deadline falls on a weekend or federal holiday,
steel pipes (external diameter exceeding The application was processed in the appropriate deadline is the next business day.
See Notice of Clarification: Application of ‘‘Next
406.4 mm but not exceeding 609.6 mm), accordance with the FTZ Act and Business Day’’ Rule for Administrative
HTSUS 7305.12.1030; line pipes Regulations, including notice in the Determination Deadlines Pursuant to the Tariff Act
(external diameter exceeding 609.6 Federal Register inviting public of 1930, As Amended, 70 FR 24533 (May 10, 2005).
VerDate Sep<11>2014 19:09 Mar 30, 2016 Jkt 238001 PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 E:\FR\FM\31MRN1.SGM 31MRN1](https://thefederalregister.org/doc/81_FR_18634/page/2.svg)
Document Created: 2016-03-31 00:55:16
Document Modified: 2016-03-31 00:55:16
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| FR Citation | 81 FR 18572 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR