81 FR 35310 - Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products From the Republic of Korea: Final Affirmative Determination, and Final Affirmative Critical Circumstances Determination, in Part
DEPARTMENT OF COMMERCE
International Trade Administration Federal Register Volume 81, Issue 106 (June 2, 2016)
International Trade Administration
Federal Register Volume 81, Issue 106 (June 2, 2016)
| Page Range | 35310-35313 | |
| FR Document | 2016-12978 |
[Federal Register Volume 81, Number 106 (Thursday, June 2, 2016)] [Notices] [Pages 35310-35313] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-12978] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE International Trade Administration [C-580-879] Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products From the Republic of Korea: Final Affirmative Determination, and Final Affirmative Critical Circumstances Determination, in Part AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (the Department) determines that countervailable subsidies are being provided to producers and exporters of certain corrosion-resistant steel products (corrosion-resistant steel) from the Republic of Korea (Korea) as provided in section 705 of the Tariff Act of 1930, as amended (the Act). For [[Page 35311]] information on the estimated subsidy rates, see the ``Final Determination'' section of this notice. The period of investigation is January 1, 2014, through December 31, 2014. DATES: Effective Date: June 2, 2016. FOR FURTHER INFORMATION CONTACT: Myrna Lobo or Jun Jack Zhao, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone (202) 482-2371 or (202) 482-1396, respectively. SUPPLEMENTARY INFORMATION: Background The Department published the Preliminary Determination on November 6, 2015.\1\ A summary of the events that occurred since the Department published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Final Decision Memorandum.\2\ The Final Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov, and is available to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Final Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. The signed Final Decision Memorandum and the electronic version are identical in content. --------------------------------------------------------------------------- \1\ See Countervailing Duty Investigation of Certain Corrosion- Resistant Steel Products from the Republic of Korea: Preliminary Affirmative Determination, 80 FR 68842 (November 6, 2015) (Preliminary Determination). \2\ See Memorandum, ``Issues and Decision Memorandum for the Final Determination in the Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products from the Republic of Korea,'' (Final Decision Memorandum), dated concurrently with this determination and hereby adopted by this notice. --------------------------------------------------------------------------- Scope Comments In accordance with the Preliminary Scope Determination,\3\ the Department set aside a period of time for parties to address scope issues in case briefs or other written comments on scope issues. --------------------------------------------------------------------------- \3\ See Memorandum to Gary Taverman, Associate Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, ``Certain Corrosion-Resistant Steel Products From the People's Republic of China, India, Italy, the Republic of Korea, and Taiwan: Scope Comments Decision Memorandum for the Preliminary Determinations,'' dated December 21, 2015 (Preliminary Scope Decision Memorandum). See also Memorandum to the File, ``Certain Corrosion-Resistant Steel Products From the People's Republic of China, India, Italy, the Republic of Korea, and Taiwan: Correction to Preliminary Determination Scope Memorandum,'' January 29, 2016. --------------------------------------------------------------------------- For a summary of the product coverage comments and rebuttal responses submitted to the record of this final determination, and accompanying discussion and analysis of all comments timely received, see the Final Scope Decision Memorandum.\4\ The Final Scope Decision Memorandum is incorporated by, and hereby adopted by, this notice. --------------------------------------------------------------------------- \4\ See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, ``Scope Comments Decision Memorandum for the Final Determinations,'' dated concurrently with this notice. --------------------------------------------------------------------------- Scope of the Investigation The product covered by this investigation is corrosion-resistant steel from the Korea. For a complete description of the scope of this investigation, see the ``Scope of the Investigation,'' in Appendix II of this notice. Analysis of Subsidy Programs and Comments Received The subsidy programs under investigation and the issues raised in the case and rebuttal briefs by parties in this investigation are discussed in the Final Decision Memorandum. A list of the issues that parties raised, and to which we responded in the Final Decision Memorandum, is attached to this notice at Appendix I. Changes Since the Preliminary Determination Based on our review and analysis of the comments received from parties, and minor corrections presented at verification, we made certain changes to the respondents' subsidy rate calculations since the Preliminary Determination. For a discussion of these changes, see the Final Decision Memorandum.\5\ --------------------------------------------------------------------------- \5\ See Final Decision Memorandum. --------------------------------------------------------------------------- Final Affirmative Determination of Critical Circumstances, in Part Prior to the Preliminary Determination, the Department preliminarily found that critical circumstances exist with respect to imports of corrosion-resistant steel from Korea for all other companies, excepting mandatory respondents Union Steel Manufacturing Co. Ltd./Dongkuk Steel Mill Co., Ltd. (Union/Dongkuk) and Dongbu Steel Co., Ltd./Dongbu Incheon Steel Co., Ltd. (Dongbu).\6\ Upon further analysis of the data following the Preliminary Determination, we are not modifying our findings for the Final Determination.\7\ Specifically, in accordance with section 705(a)(2) of the Act, we continue to find that critical circumstances exist with respect imports from all other producers or exporters, but do not exist for Union/ Dongkuk and Dongbu. --------------------------------------------------------------------------- \6\ See Antidumping and Countervailing Duty Investigations of Corrosion-Resistant Steel Products From India, Italy, the People's Republic of China, the Republic of Korea, and Taiwan: Preliminary Determinations of Critical Circumstances, 80 FR 68504 (November 5, 2015). Dongbu Incheon Steel Co., Ltd. (Dongbu Incheon) is not listed in this notice; however, we preliminarily determined that Dongbu Incheon is a wholly-owned subsidiary of Dongbu Steel Co., Ltd. and calculated a single countervailing duty rate for both companies. Thus, we stated that the suspension of liquidation for both companies would begin on the date of publication of the Preliminary Determination. See Preliminary Determination, 80 FR at 68842. \7\ For a full description of the methodology and results of our analysis, see the Final Decision Memorandum. --------------------------------------------------------------------------- Final Determination In accordance with section 705(c)(1)(B)(i) of the Act, we calculated a rate for Union/Dongkuk and Dongbu, the two exporters/ producers of subject merchandise selected for individual examination in this investigation. In accordance with sections 705(c)(1)(B)(i)(I) and 705(c)(5)(A) of the Act, for companies not individually investigated, we apply an ``all-others'' rate, which is normally calculated by weighting the subsidy rates of the individual companies selected as respondents with those companies' export sales of the subject merchandise to the United States. Under section 705(c)(5)(A)(i) of the Act, the all-others rate should exclude zero and de minimis rates calculated for the exporters and producers individually investigated, and any rates determined entirely under section 776 of the Act. We therefore have excluded the rate for Union/Dongkuk from the all-others rate. Because the only individually calculated rate that is not zero, de minimis, or based on facts otherwise available is the rate calculated for Dongbu, in accordance with section 705(c)(5)(A)(i) of the Act, the rate calculated for Dongbu is assigned as the ``all-others'' rate. The estimated countervailable subsidy rates are as follows: ------------------------------------------------------------------------ Company Subsidy rate ------------------------------------------------------------------------ Union Steel Manufacturing Co. Ltd./Dongkuk 0.72 percent (de minimis). Steel Mill Co., Ltd. [[Page 35312]] Dongbu Steel Co., Ltd./Dongbu Incheon 1.19 percent. Steel Co., Ltd. All-Others................................ 1.19 percent. ------------------------------------------------------------------------ Continuation of Suspension of Liquidation As a result of our Preliminary Determination and pursuant to section 703(d) of the Act, we instructed U.S. Customs and Border Protection (CBP) to suspend liquidation of all entries of subject merchandise from Korea, other than subject merchandise produced/ exported by Union/Dongkuk which received a de minimis countervailable subsidy rate in the Preliminary. Determination Pursuant to section 703(d) of the Act, we subsequently instructed CBP to suspend liquidation of all entries of merchandise under consideration from Korea, with the exception of Union/Dongkuk, that were entered or withdrawn from warehouse, for consumption, on or after August 8, 2015 (for those entities for which we found critical circumstances exist) or on or after November 6, 2015, the date of publication of the Preliminary Determination in the Federal Register (for those entities for which we did not find critical circumstances exist). In accordance with section 703(d) of the Act, we issued instructions to CBP to discontinue the suspension of liquidation for CVD purposes for subject merchandise entered, or withdrawn from warehouse, on or after March 4, 2016, but to continue the suspension of liquidation of all entries from August 8, 2015, or November 6, 2015, as the case may be, through March 3, 2016. If the U.S. International Trade Commission (the ITC) issues a final affirmative injury determination, we will issue a CVD order and will reinstate the suspension of liquidation under section 706(a) of the Act and will require a cash deposit of estimated CVDs for such entries of subject merchandise in the amounts indicated above that are not de minimis. If the ITC determines that material injury, or threat of material injury, does not exist, this proceeding will be terminated and all estimated duties deposited or securities posted as a result of the suspension of liquidation will be refunded or canceled. ITC Notification In accordance with section 705(d) of the Act, we will notify the ITC of our determination. In addition, we are making available to the ITC all non-privileged and non-proprietary information related to this investigation. We will allow the ITC access to all privileged and business proprietary information in our files, provided the ITC confirms that it will not disclose such information, either publicly or under an administrative protective order (APO), without the written consent of the Assistant Secretary for Enforcement and Compliance. Notification Regarding Administrative Protective Orders In the event the ITC issues a final negative injury determination, this notice will serve as the only reminder to parties subject to an APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation subject to sanction. This determination is issued and published pursuant to sections 705(d) and 777(i) of the Act. Dated: May 24, 2016. Paul Piquado, Assistant Secretary for Enforcement and Compliance. Appendix I--List of Topics Discussed in the Final Decision Memorandum I. Summary II. Background III. Final Determination of Critical Circumstances, in Part IV. Scope of the Investigation V. Subsidies Valuation Information VI. Benchmarks and Discount Rates VII. Analysis of Programs VIII. Analysis of Comments Comment 1: Whether the Department Should Find the Provision of Electricity for Less Than Adequate Remuneration (LTAR) Countervailable Based on Adverse Facts Available Comment 2: Whether the Provision of Electricity Provides a Benefit Comment 3: Whether the Department Should Use Other Submitted Data to Measure the Adequacy of Remuneration for Electricity Comment 4: Whether Benefits Received From Dongbu's Voluntary Debt Restructuring are Countervailable Comment 5: Whether Benefits Should Be Calculated for Loans and Bonds Which Were Issued to Dongbu by GOK-Owned Banks Prior to Its Voluntary Restructuring Comment 6: Whether Dongbu was Creditworthy in 2014 and Whether the Department Should Recalculate Benefits Using Creditworthy Benchmarks Comment 7: Whether Nonghyup Bank is an ``Authority'' and Loans Received From Nonghyup Bank are Countervailable Comment 8: Whether the Department Should Find That the Provision of Natural Gas for LTAR is Countervailable IX. Recommendation Appendix II--Scope of the Investigation The products covered by this investigation are certain flat- rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non- rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ``worked after rolling'' (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross- section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:2.50 percent of manganese, or 3.30 percent of silicon, or 1.50 percent of copper, or 1.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 2.00 percent of nickel, or 0.30 percent of tungsten (also called wolfram), or 0.80 percent of molybdenum, or 0.10 percent of niobium (also called columbium), or 0.30 percent of vanadium, or [[Page 35313]] 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial- free (``IF'')) steels and high strength low alloy (``HSLA'') steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Furthermore, this scope also includes Advanced High Strength Steels (``AHSS'') and Ultra High Strength Steels (``UHSS''), both of which are considered high tensile strength and high elongation steels. Subject merchandise also includes corrosion-resistant steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching and/or slitting or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in- scope corrosion resistant steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation: Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (``terne plate''), or both chromium and chromium oxides (``tin free steel''), whether or not painted, varnished or coated with plastics or other non-metallic substances in addition to the metallic coating; Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness; and Certain clad stainless flat-rolled products, which are three-layered corrosion-resistant flat-rolled steel products less than 4.75 mm in composite thickness that consist of a flat-rolled steel product clad on both sides with stainless steel in a 20%-60%- 20% ratio. The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (``HTSUS'') under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, and 7212.60.0000. The products subject to the investigation may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive. [FR Doc. 2016-12978 Filed 6-1-16; 8:45 am] BILLING CODE 3510-DS-P
![35310 Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices
Dated: May 24, 2016. purposes of the width and thickness • Flat-rolled steel products either plated or
Paul Piquado, requirements referenced above: coated with tin, lead, chromium, chromium
(1) Where the nominal and actual oxides, both tin and lead (‘‘terne plate’’), or
Assistant Secretary for Enforcement and
measurements vary, a product is within the both chromium and chromium oxides (‘‘tin
Compliance.
scope if application of either the nominal or free steel’’), whether or not painted,
Appendix I actual measurement would place it within varnished or coated with plastics or other
the scope based on the definitions set forth non-metallic substances in addition to the
List of Topics Discussed in the Final above, and metallic coating;
Decision Memorandum (2) where the width and thickness vary for • Clad products in straight lengths of
I. Summary a specific product (e.g., the thickness of 4.7625 mm or more in composite thickness
II. Background certain products with non-rectangular cross- and of a width which exceeds 150 mm and
III. Final Determination of Critical section, the width of certain products with measures at least twice the thickness; and
Circumstances, in Part non-rectangular shape, etc.), the • Certain clad stainless flat-rolled
IV. Scope of the Investigation measurement at its greatest width or products, which are three-layered corrosion-
V. Application of the Countervailing Duty thickness applies. resistant flat-rolled steel products less than
Law to Imports From the PRC Steel products included in the scope of this 4.75 mm in composite thickness that consist
VI. Subsidies Valuation Information investigation are products in which: (1) Iron of a flat-rolled steel product clad on both
VII. Benchmarks and Discount Rates predominates, by weight, over each of the sides with stainless steel in a 20%-60%-20%
VIII. Use of Facts Otherwise Available and other contained elements; (2) the carbon ratio.
Adverse Inferences content is 2 percent or less, by weight; and The products subject to the investigation
IX. Analysis of Programs (3) none of the elements listed below exceeds are currently classified in the Harmonized
X. Analysis of Comments the quantity, by weight, respectively Tariff Schedule of the United States
Comment 1: Whether Respondent’s indicated: (‘‘HTSUS’’) under item numbers:
Producers of Inputs Are ‘‘Authorities’’ • 2.50 percent of manganese, or 7210.30.0030, 7210.30.0060, 7210.41.0000,
Comment 2: Whether Inputs for LTAR Are • 3.30 percent of silicon, or 7210.49.0030, 7210.49.0091, 7210.49.0095,
Specific • 1.50 percent of copper, or 7210.61.0000, 7210.69.0000, 7210.70.6030,
Comment 3: Whether To Use a Tier One • 1.50 percent of aluminum, or 7210.70.6060, 7210.70.6090, 7210.90.6000,
Benchmark To Determine the Adequacy • 1.25 percent of chromium, or 7210.90.9000, 7212.20.0000, 7212.30.1030,
of Remuneration for Inputs for LTAR • 0.30 percent of cobalt, or 7212.30.1090, 7212.30.3000, 7212.30.5000,
Comment 4: Whether the Provision of • 0.40 percent of lead, or 7212.40.1000, 7212.40.5000, 7212.50.0000,
Electricity for LTAR Is Countervailable • 2.00 percent of nickel, or and 7212.60.0000.
Comment 5: Whether the GOC Provided • 0.30 percent of tungsten (also called The products subject to the investigation
Policy Loans to YPC During the POI wolfram), or may also enter under the following HTSUS
Comment 6: Whether the Export Buyer’s • 0.80 percent of molybdenum, or item numbers: 7210.90.1000, 7215.90.1000,
Credit Program Was Used by Respondent • 0.10 percent of niobium (also called 7215.90.3000, 7215.90.5000, 7217.20.1500,
Comment 7: Correcting VAT in the Hot- columbium), or 7217.30.1530, 7217.30.1560, 7217.90.1000,
Rolled Steel and Primary Aluminum • 0.30 percent of vanadium, or 7217.90.5030, 7217.90.5060, 7217.90.5090,
Benchmarks • 0.30 percent of zirconium 7225.91.0000, 7225.92.0000, 7225.99.0090,
Comment 8: Whether To Apply AFA to Unless specifically excluded, products are 7226.99.0110, 7226.99.0130, 7226.99.0180,
YCL’s Sales From Other PRC Producers included in this scope regardless of levels of 7228.60.6000, 7228.60.8000, and
of Corrosion-Resistant Steel boron and titanium. 7229.90.1000.
XI. Recommendation For example, specifically included in this The HTSUS subheadings above are
scope are vacuum degassed, fully stabilized provided for convenience and customs
Appendix II (commonly referred to as interstitial-free purposes only. The written description of the
(‘‘IF’’)) steels and high strength low alloy scope of the investigation is dispositive.
Scope of the Investigation
(‘‘HSLA’’) steels. IF steels are recognized as [FR Doc. 2016–12962 Filed 6–1–16; 8:45 am]
The products covered by this investigation low carbon steels with micro-alloying levels
are certain flat-rolled steel products, either BILLING CODE 3510–DS–P
of elements such as titanium and/or niobium
clad, plated, or coated with corrosion- added to stabilize carbon and nitrogen
resistant metals such as zinc, aluminum, or elements. HSLA steels are recognized as
zinc-, aluminum-, nickel- or iron-based steels with micro-alloying levels of elements DEPARTMENT OF COMMERCE
alloys, whether or not corrugated or painted, such as chromium, copper, niobium,
varnished, laminated, or coated with plastics titanium, vanadium, and molybdenum. International Trade Administration
or other non-metallic substances in addition Furthermore, this scope also includes
[C–580–879]
to the metallic coating. The products covered Advanced High Strength Steels (‘‘AHSS’’)
include coils that have a width of 12.7 mm and Ultra High Strength Steels (‘‘UHSS’’),
or greater, regardless of form of coil (e.g., in both of which are considered high tensile
Countervailing Duty Investigation of
successively superimposed layers, spirally strength and high elongation steels. Certain Corrosion-Resistant Steel
oscillating, etc.). The products covered also Subject merchandise also includes Products From the Republic of Korea:
include products not in coils (e.g., in straight corrosion-resistant steel that has been further Final Affirmative Determination, and
lengths) of a thickness less than 4.75 mm and processed in a third country, including but Final Affirmative Critical
a width that is 12.7 mm or greater and that not limited to annealing, tempering, painting, Circumstances Determination, in Part
measures at least 10 times the thickness. The varnishing, trimming, cutting, punching and/
products covered also include products not or slitting or any other processing that would AGENCY: Enforcement and Compliance,
in coils (e.g., in straight lengths) of a not otherwise remove the merchandise from International Trade Administration,
thickness of 4.75 mm or more and a width the scope of the investigation if performed in Department of Commerce.
exceeding 150 mm and measuring at least the country of manufacture of the in-scope SUMMARY: The Department of Commerce
asabaliauskas on DSK3SPTVN1PROD with NOTICES
twice the thickness. The products described corrosion resistant steel. (the Department) determines that
above may be rectangular, square, circular, or All products that meet the written physical countervailable subsidies are being
other shape and include products of either description, and in which the chemistry
provided to producers and exporters of
rectangular or non-rectangular cross-section quantities do not exceed any one of the noted
where such cross-section is achieved element levels listed above, are within the certain corrosion-resistant steel
subsequent to the rolling process, i.e., scope of this investigation unless specifically products (corrosion-resistant steel) from
products which have been ‘‘worked after excluded. The following products are outside the Republic of Korea (Korea) as
rolling’’ (e.g., products which have been of and/or specifically excluded from the provided in section 705 of the Tariff Act
beveled or rounded at the edges). For scope of this investigation: of 1930, as amended (the Act). For
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35416/page/1.svg)
![Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices 35313
• 0.30 percent of zirconium 7225.91.0000, 7225.92.0000, 7225.99.0090, 2016, the Department verified the sales
Unless specifically excluded, products are 7226.99.0110, 7226.99.0130, 7226.99.0180, and cost data reported by Prosperity
included in this scope regardless of levels of 7228.60.6000, 7228.60.8000, and Tieh Enterprise Co., Ltd. (‘‘PT’’), Yieh
boron and titanium. 7229.90.1000.
The HTSUS subheadings above are
Phui Enterprise Co., Ltd. (‘‘YP’’), and
For example, specifically included in this Synn Industrial Co., Ltd. (‘‘Synn’’). In
scope are vacuum degassed, fully stabilized provided for convenience and customs
(commonly referred to as interstitial-free purposes only. The written description of the April 2016, Petitioner,2 YP, and PT
(‘‘IF’’)) steels and high strength low alloy scope of the investigation is dispositive. submitted case briefs and rebuttal briefs.
(‘‘HSLA’’) steels. IF steels are recognized as [FR Doc. 2016–12978 Filed 6–1–16; 8:45 am]
For a complete discussion of the events
low carbon steels with micro-alloying levels that occurred since the Preliminary
BILLING CODE 3510–DS–P
of elements such as titanium and/or niobium Determination, see the Issues and
added to stabilize carbon and nitrogen Decision Memorandum.3
elements. HSLA steels are recognized as Also, as explained in the
steels with micro-alloying levels of elements DEPARTMENT OF COMMERCE
memorandum from the Acting Assistant
such as chromium, copper, niobium, Secretary for Enforcement and
titanium, vanadium, and molybdenum. International Trade Administration
Compliance, the Department exercised
Furthermore, this scope also includes [A–583–856]
Advanced High Strength Steels (‘‘AHSS’’) its authority to toll all administrative
and Ultra High Strength Steels (‘‘UHSS’’), Certain Corrosion-Resistant Steel deadlines due to the recent closure of
both of which are considered high tensile Products From Taiwan: Final the Federal Government.4 As a
strength and high elongation steels. Determination of Sales at Less Than consequence, all deadlines in this
Subject merchandise also includes segment of the proceeding have been
corrosion-resistant steel that has been further Fair Value and Final Affirmative
Determination of Critical extended by four business days. The
processed in a third country, including but revised deadline for the final
not limited to annealing, tempering, painting, Circumstances, in Part
determination is now May 24, 2016.
varnishing, trimming, cutting, punching and/
or slitting or any other processing that would
AGENCY: Enforcement and Compliance,
Scope of the Investigation
not otherwise remove the merchandise from International Trade Administration,
the scope of the investigation if performed in Department of Commerce. The product covered by this
the country of manufacture of the in-scope SUMMARY: The Department of Commerce investigation is corrosion-resistant steel
corrosion resistant steel. (‘‘Department’’) determines that certain from Taiwan. For a complete
All products that meet the written physical corrosion-resistant steel products description of the scope of this
description, and in which the chemistry (‘‘corrosion-resistant steel’’) from investigation, see the ‘‘Scope of the
quantities do not exceed any one of the noted Investigation,’’ in Appendix II of this
element levels listed above, are within the
Taiwan are being, or are likely to be,
sold in the United States at less than fair notice.
scope of this investigation unless specifically
excluded. The following products are outside value (‘‘LTFV’’), as provided in section Scope Comments
of and/or specifically excluded from the 735(a) of the Tariff Act of 1930, as
In accordance with the Preliminary
scope of this investigation: amended (‘‘the Act’’). The period of
Scope Determination,5 the Department
• Flat-rolled steel products either plated or investigation (‘‘POI’’) is April 1, 2014,
coated with tin, lead, chromium, chromium through March 31, 2015. The final set aside a period of time for parties to
oxides, both tin and lead (‘‘terne plate’’), or dumping margins of sales at LTFV are address scope issues in case briefs or
both chromium and chromium oxides (‘‘tin listed below in the ‘‘Final other written comments on scope issues.
free steel’’), whether or not painted, For a summary of the product
Determination’’ section of this notice.
varnished or coated with plastics or other coverage comments and rebuttal
non-metallic substances in addition to the DATES: Effective Date: June 2, 2016.
metallic coating; FOR FURTHER INFORMATION CONTACT: 2 Petitioners are United States Steel Corporation,
• Clad products in straight lengths of Shanah Lee or Paul Stolz, AD/CVD Nucor Corporation, ArcelorMittal USA, AK Steel
4.7625 mm or more in composite thickness Operations, Office III, Enforcement and Corporation, Steel Dynamics, Inc., and California
and of a width which exceeds 150 mm and Steel Industries, Inc. AK Steel Corporation was the
Compliance, International Trade only Petitioner to file comments in this case.
measures at least twice the thickness; and Administration, U.S. Department of
• Certain clad stainless flat-rolled
3 See Memorandum from Christian Marsh, Deputy
products, which are three-layered corrosion- Commerce, 14th Street and Constitution Assistant Secretary for Antidumping and
resistant flat-rolled steel products less than Avenue NW., Washington, DC 20230; Countervailing Duty Operations, to Paul Piquado,
telephone: (202) 482–6386 or (202) 482– Assistant Secretary for Enforcement and
4.75 mm in composite thickness that consist Compliance, ‘‘Issues and Decision Memorandum for
of a flat-rolled steel product clad on both 4474, respectively. the Final Determination in the Antidumping Duty
sides with stainless steel in a 20%–60%– SUPPLEMENTARY INFORMATION: Investigation of Certain Corrosion-Resistant Steel
20% ratio. Products from Taiwan,’’ dated concurrently with
The products subject to the investigation Background this notice (‘‘Issues and Decision Memorandum’’).
4 See Memorandum to the File from Ron
are currently classified in the Harmonized On January 4, 2016, the Department
Tariff Schedule of the United States Lorentzen, Acting A/S for Enforcement &
published the Preliminary Compliance, ‘‘Tolling of Administrative Deadlines
(‘‘HTSUS’’) under item numbers: Determination of this antidumping duty As a Result of the Government Closure During
7210.30.0030, 7210.30.0060, 7210.41.0000, Snowstorm Jonas’’ dated January 27, 2016.
7210.49.0030, 7210.49.0091, 7210.49.0095,
(‘‘AD’’) investigation and invited parties
5 See Memorandum to Gary Taverman, Associate
7210.61.0000, 7210.69.0000, 7210.70.6030, to comment.1 As provided in section
Deputy Assistant Secretary for Antidumping and
7210.70.6060, 7210.70.6090, 7210.90.6000, 782(i) of the Act, in January and April Countervailing Duty Operations, ‘‘Certain
7210.90.9000, 7212.20.0000, 7212.30.1030,
asabaliauskas on DSK3SPTVN1PROD with NOTICES
Corrosion-Resistant Steel Products From the
7212.30.1090, 7212.30.3000, 7212.30.5000, 1 See Certain Corrosion-Resistant Steel Products People’s Republic of China, India, Italy, the
7212.40.1000, 7212.40.5000, 7212.50.0000, from Taiwan: Negative Preliminary Determination Republic of Korea, and Taiwan: Scope Comments
and 7212.60.0000. of Sales at Less Than Fair Value, 81 FR 72 (January Decision Memorandum for the Preliminary
The products subject to the investigation 4, 2016) (‘‘Preliminary Determination’’). See also Determinations,’’ dated December 21, 2015
Antidumping Duty Investigations of Corrosion- (‘‘Preliminary Scope Decision Memorandum’’). See
may also enter under the following HTSUS Resistant Steel Products from India, Italy, the also Memorandum to the File, ‘‘Certain Corrosion-
item numbers: 7210.90.1000, 7215.90.1000, People’s Republic of China, the Republic of Korea, Resistant Steel Products From the People’s Republic
7215.90.3000, 7215.90.5000, 7217.20.1500, and Taiwan: Notice of Correction to Preliminary of China, India, Italy, the Republic of Korea, and
7217.30.1530, 7217.30.1560, 7217.90.1000, Antidumping Determinations, 81 FR 6236 (February Taiwan: Correction to Preliminary Determination
7217.90.5030, 7217.90.5060, 7217.90.5090, 5, 2016) (‘‘Scope Correction Notice’’). Scope Memorandum,’’ dated January 29, 2016.
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00021 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35416/page/4.svg)
Document Created: 2016-06-02 01:22:41
Document Modified: 2016-06-02 01:22:41
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Contact | Myrna Lobo or Jun Jack Zhao, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone (202) 482-2371 or (202) 482-1396, respectively. | |
| FR Citation | 81 FR 35310 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR