81 FR 35351 - Certain New Chemicals; Receipt and Status Information for April 2016
ENVIRONMENTAL PROTECTION AGENCY Federal Register Volume 81, Issue 106 (June 2, 2016)
Federal Register Volume 81, Issue 106 (June 2, 2016)
| Page Range | 35351-35356 | |
| FR Document | 2016-13028 |
[Federal Register Volume 81, Number 106 (Thursday, June 2, 2016)] [Notices] [Pages 35351-35356] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-13028] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0023; FRL-9946-86] Certain New Chemicals; Receipt and Status Information for April 2016 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to [[Page 35352]] manufacture those chemicals. This document covers the period from April 1, 2016 to April 29, 2016. DATES: Comments identified by the specific case number provided in this document, must be received on or before July 5, 2016. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0023, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, Information Management Division, 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from April 1, 2016 to April 29, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new'' chemical, while those that are on the TSCA Inventory are classified as an ``existing'' chemical. For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 58 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From April 1, 2016 to April 29, 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected end Case No. Date received date for EPA Manufacturer/ Importer Use(s) Chemical identity review -------------------------------------------------------------------------------------------------------------------------------------------------------- P-16-0095........................... 4/11/2016 7/10/2016 CBI.................... (G) Flame retardant additive (G) Phenol-formaldehyde resin. P-16-0119........................... 4/20/2016 7/19/2016 CBI.................... (G) Intermediate............ (G) Chlorofluorocarbon. P-16-0150........................... 4/26/2016 7/25/2016 CBI.................... (G) Intermediate............ (G) Chlorofluorocarbon. [[Page 35353]] P-16-0267........................... 4/20/2016 7/19/2016 Allnex USA, Inc........ (S) Electro-deposition (G) Fatty acids, reaction primer. products with alkylamine, polymers with substituted carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate, lactates (salts). P-16-0277........................... 4/1/2016 6/30/2016 Organic Dyestuffs (S) Metalized dye for dyeing (S) Chromate(1-), hydroxy[2- Corporation. wool with good fastness (hydroxy-ko)-3-[2-[2- properties. (hydroxy-ko)-1- naphthalenyl]diazenyl-kn1]- 5-nitrobenzenesulfonato(3- )]-, sodium (1:1). P-16-0279........................... 4/4/2016 7/3/2016 Akzo Nobel Surface (G) Component in paints..... (S) Hexanamide, n,-[3- Chemistry, LLC. (dimethylamino)propyl]-, compd, with 2- methyloxirane polymer with oxirane mono (2- ethylhexyl) ether phosphate. P-16-0281........................... 4/11/2016 7/10/2016 CBI.................... (G) Reactive polyol......... (G) Fatty alcohols--dimers, trimmers, polymers. P-16-0287........................... 4/1/2016 6/30/2016 CBI.................... (G) Hardener for epoxy (G) Alkanoic acid, 2- coating. substituted-methyl ester, reaction products with aromatic diamine- [alkanediylbis(oxymethylen e)]bis[oxirane] polymer. P-16-0289........................... 4/1/2016 6/30/2016 CBI.................... (G) Extrusion compounding (G) Semi-aromatic resin molding resin. polyamide. P-16-0290........................... 4/1/2016 6/30/2016 CBI.................... (G) Fuel additive........... (G) Copolymer of maleic acid and olefin. P-16-0291........................... 4/3/2016 7/2/2016 CBI.................... (G) Curing agent............ (G) 1,3- cyclohexanedimethanamine adduct. P-16-0292........................... 4/5/2016 7/4/2016 CBI.................... (S) Intermediate for use in (G) Depolymerized waste the manufacture of polymers. plastics. P-16-0293........................... 4/13/2016 7/12/2016 Charkit Chemical (S) Compounding of fragrance (S) Octanoic acid, Corporation. for industrial cleaners/ phenylmethyl ester. janitorial compounds, detergents, etc. P-16-0299........................... 4/20/2016 7/19/2016 CBI.................... (S) Reactive (meth)acrylate (G) Polyurethane, oligomer for ultra violet methacrylate-blocked. cured 3d printed parts. P-16-0300........................... 4/6/2016 7/5/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Oxirane, 2-methyl-, polymer with 1,3-xylylene diisocyanate and oxirane, 3-(trimethoxysilyl)propyl isocyanate. P-16-0301........................... 4/6/2016 7/5/2016 CBI.................... (G) Intermediate............ (G) Propyl silsesquioxanes, hydrogen-terminated. P-16-0302........................... 4/6/2016 7/5/2016 CBI.................... (G) Plastic additive........ (G) Organic modified propyl silsesquioxane. P-16-0303........................... 4/7/2016 7/6/2016 CBI.................... (G) Use for the production (G) Alkyl methyacrylate of acrylic resin for polymer with styrene, waterborne exterior amino acrylate and acrylic coatings composition. acid, ammonium salt. P-16-0304........................... 4/7/2016 7/6/2016 CBI.................... (G) Industrial adhesive..... (G) Polyurea grease. P-16-0305........................... 4/7/2016 7/6/2016 CBI.................... (G) Industrial Adhesive..... (G) Polyurea grease. P-16-0307........................... 4/8/2016 7/7/2016 CBI.................... (G) Open non dispersive use. (G) Heteropolycycliccarboxylic acid, 1,3-dihydro- disubstituted-, polymer with 1,1'-methylenebis[4- isocyanatobenzene], reaction products with silica. P-16-0308........................... 4/8/2016 7/7/2016 Itaconix Corporation... (G) Reactive Monomer........ (S) Butanedioic acid, 2- methylene-, 1,4-bis (2- methylpropyl) ester. [[Page 35354]] P-16-0309........................... 4/8/2016 7/7/2016 CBI.................... (G) PMN substances are (G) Bisamide mixture. intended for use as rheological or thixotropic agents used in the production of solvent based industrial coatings, high solid aromatic paints, adhesives, sealants, and other types of paints and topcoats. P-16-0310........................... 4/8/2016 7/7/2016 CBI.................... (G) PMN substances are (G) Bisamide mixture. intended for use as rheological or thixotropic agents used in the production of solvent based industrial coatings, high solid aromatic paints, adhesives, sealants, and other types of paints and topcoats. P-16-0311........................... 4/8/2016 7/7/2016 CBI.................... (S) Coatings for wood metal (G) Aromatic dicarboxylic and plastic. acid, polymer with alkyl dicarcoxylic acid, alkyl diol, hydroxy(hydroxyalkyl)alkyl carboxylic acid, methylenebis(isocyanatocyc loalkane) and alkylethylidene bis(phenyleneoxy)bis[alkyl alcohol]. P-16-0312........................... 4/8/2016 7/7/2016 CBI.................... (S) Coatings for wood metal (G) Aromatic dicarboxylic and plastic. acid, polymer with cycloalkanemethanol, alkanediamine, alkanedioic acid, hydroxy-2- (hydroxyalkyl)-2- alkylcarboxylic acid, methylenebis[isocyanatocyc loalkane] and [(methylethylidene)bis(phe nyleneoxy)]bis[alkanol]. P-16-0313........................... 4/11/2016 7/10/2016 Honeyol, Inc........... (S) Use in production of (S) Tar acids (shale oil), resins (raw material used c6-9-fraction, in the production of alkylphenols, low-boiling. resins). P-16-0314........................... 4/11/2016 7/10/2016 Firmenich, Inc......... (G) As part of a fragrance (S) Ethanone, 1-(5-propyl- formula. 1,3-benzodioxol-2-yl)- P-16-0315........................... 4/11/2016 7/10/2016 CBI.................... (S) Industrial rubber (G) Alkyldiene, polymer, formulation. terminated alkoxysilylalkylcarbamate. P-16-0316........................... 4/11/2016 7/10/2016 CBI.................... (G) Drilling chemical....... (G) Aliphatic polyester. P-16-0317........................... 4/11/2016 7/10/2016 CBI.................... (G) Drilling chemical....... (G) Aliphatic polyester. P-16-0322........................... 4/22/2016 7/21/2016 CBI.................... (G) Pulp bleaching catalyst. (G) Manganese cyclic (tri)amine chloride complex. P-16-0322........................... 4/22/2016 7/21/2016 CBI.................... (G) Textile bleaching (G) Manganese cyclic catalyst. (tri)amine chloride complex. P-16-0323........................... 4/13/2016 7/12/2016 Allnex USA, Inc........ (G) Coating resin........... (G) Alkylaldehyde, reaction products with substituted carbomonocycle-substituted heteromonocycle-alkylene glycol bis [[[substituted(oxoneoalky) oxy]alkyl]amino]alky] ether polymer and alkyl substituted alkanediamine, acetate salts. P-16-0324........................... 4/13/2016 7/12/2016 CBI.................... (G) Adhesive for open non- (G) Ultra violet-curable descriptive use. urethane acrylate. P-16-0325........................... 4/13/2016 7/12/2016 CBI.................... (G) Oil & Gas extraction.... (G) Polymer of substituted acrylic acid and bromohexane. P-16-0326........................... 4/27/2016 7/26/2016 Firmenich, Inc......... (G) As part of a fragrance (S) Propanoic acid, 2,2- formula. dimethyl-,1-methyl-2-(1- methylethoxy)-2-oxoethyl ester. P-16-0327........................... 4/14/2016 7/13/2016 CBI.................... (G) Additive in rubber tires (G) Alkenoic acid, polymer with alkylalkenoate, sodium salt. [[Page 35355]] P-16-0328........................... 4/19/2016 7/18/2016 CBI.................... (G) Intermediate............ (G) Terephthalic acid, polymer with alkanepolycarboxylic acids, alkanepolyols, isophthalic acid, polyetherpolyol, 1,1- methylenebis[isocyanatoben zene], phthalic anhydride and a substituted alkanepolyol. P-16-0329........................... 4/19/2016 7/18/2016 CBI.................... (G) Adhesive component...... (G) Polymer of alkanepolycarboxylic acids, alkanepolyols, isophthalic acid, polyetherpolyols, 1,1- methylenebis[isocyanatoben zene], terephthalic acid, phthalic anhydride and a substituted alkanepolyol. P-16-0330........................... 4/19/2016 7/18/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Hydroxy functional triglyceride polymer with glycerol mono-ester and 1,1'-methylenebis[4- isocyanatobenzene]. P-16-0331........................... 4/19/2016 7/18/2016 H.B. Fuller Company.... (G) Industrial adhesive..... (G) Hydroxy functional triglyceride polymer with glycerol mono-ester and 1,1'- methylenebis[isocyanatoben zene]. P-16-0332........................... 4/21/2016 7/20/2016 CBI.................... (G) Component of coating.... (G) Carbomonocycle phosphate metal salt. P-16-0334........................... 4/22/2016 7/21/2016 Lamberti USA, Inc...... (G) Additive for industrial (G) Polymeric amide. purposes. P-16-0335........................... 4/22/2016 7/21/2016 Lamberti USA, Inc...... (G) Additive for industrial (G) Polymeric amide. purposes. P-16-0336........................... 4/22/2016 7/21/2016 CBI.................... (G) Fuel additive-- (G) Polyolefin ester. destructive use. P-16-0337........................... 4/25/2016 7/24/2016 CBI.................... (S) Monomer................. (G) Aliphatic acrylate. P-16-0338........................... 4/26/2016 7/25/2016 CBI.................... (G) Dyestuff................ (G) Substituted xanthene derivative. P-16-0339........................... 4/26/2016 7/25/2016 CBI.................... (G) Dyestuff................ (G) Azo derivatives. P-16-0340........................... 4/26/2016 7/25/2016 Solazyme, Inc.......... (G) Feedstock for (G) Glycerides, c8-18 and oleochemical industry. c18 unsaturated, from fermentation. P-16-0340........................... 4/26/2016 7/25/2016 Solazyme, Inc.......... (G) Renewable oil source for (G) Glycerides, c8-18 and fuels. c18 unsaturated, from fermentation. P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (G) Elastomer............... (S) 2-oxepanone, homopolymer, ester with 1,6-hexanediol. P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (S) Industrial coatings..... (S) 2-oxepanone, homopolymer, ester with 1,6-hexanediol. P-16-0341........................... 4/27/2016 7/26/2016 Perstorp Polyols....... (S) Adhesive components..... (S) 2-oxepanone, homopolymer, ester with 1,6-hexanediol. P-16-0342........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified acrylic polymer (G) Modified acrylic used as a dispersant for polymer. deflocculation of pigments in industrial paints and coatings. P-16-0343........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified urethane (G) Modified urethane polymer used as a polymer. dispersant for deflocculation of pigments in industrial paints and coatings. P-16-0344........................... 4/27/2016 7/26/2016 CBI.................... (S) Modified acrylic polymer (G) Modified urethane used as a dispersant for polymer. deflocculation of pigments in industrial paints and coatings. P-16-0345........................... 4/28/2016 7/27/2016 CBI.................... (G) Processing aid.......... (G) Acrylamide, polymer with methacrylic acid derivatives. -------------------------------------------------------------------------------------------------------------------------------------------------------- For the 31 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. [[Page 35356]] Table 2--NOCs Received From April 1, 2016 to April 29, 2016 ---------------------------------------------------------------------------------------------------------------- Projected date Case No. Date received of Chemical identity commencement ---------------------------------------------------------------------------------------------------------------- P-05-0522........................... 4/26/2016 3/31/2016 (S) [1,1'-biphenyl]-4-carboxaldehyde. P-11-0243........................... 4/1/2016 3/12/2016 (G) Alkanedioic acid polymer with alkanediol and diisocyanatohexane. P-13-0670........................... 4/25/2016 4/4/2016 (G) Alkyl-[4- (carbomonocyclesubstituted)carbomonocycle ]-(dialkyl-hydroxycarbomonocycle)alkane derivative. P-13-0671........................... 4/25/2016 4/4/2016 (G) Alkyl-[4- (carbomonocyclesubstituted)carbomonocycle ]-(dialkyl-hydroxycarbomonocycle)alkane derivative. P-14-0166........................... 4/4/2016 3/3/2016 (G) Fatty acid amide. P-14-0185........................... 4/4/2016 3/5/2016 (G) Fatty acid amide acetate. P-14-0800........................... 4/22/2016 4/11/2016 (G) Solvent red 252. P-15-0046........................... 4/12/2016 4/1/2016 (S) Propanol, oxybis, polymer with bis(isocyanatomethyl)cyclohexane and alpha-hydro-omega-hydroxypoly(oxy-1,4- butanediyl). P-15-0074........................... 4/8/2016 3/30/2016 (G) Trisiloxane alkoxylate. P-15-0329........................... 4/12/2016 3/12/2016 (S) Urea, n, n``-1,6-hexanediylbis[n'- [(1s)-1-phenylethyl]-. P-15-0382........................... 4/29/2016 4/20/2016 (G) Polyitaconic acid, sodium zinc salt. P-15-0409........................... 4/5/2016 3/24/2016 (G) Substituted alkanolamine ether. P-15-0515........................... 4/19/2016 4/7/2016 (G) 2-propenoic acid, 2-methyl, methyl ester, polymer with ethenylbenzene, ethyl 2-propenoate, 2-oxiranylmethyl 2-methyl-2- propenoate and 1,2-propanediol mono(2- methyl-2-propenoate), reaction products with dialkylamine, carboxylate salt. P-15-0567........................... 4/8/2016 3/10/2016 (S) Hexanedioic acid, polymer with 1,?6- ?hexanediol, 1,?3-?isobenzofurandione, 5- ?isocyanato-?1-?(isocyanatomethyl)?- ?1,?3,?3-?trimethylcyclohexane and 1,?2,?3-?propanetriol, 2-?hydroxyethyl acrylate-?blocked. P-15-0623........................... 4/18/2016 4/14/2016 (G) Fatty acids, polymers with bisphenol a, nutshell liq., epichlorohydrin, alkylenediamine, formaldehyde and polyalkylenepolyamine. P-15-0733........................... 4/4/2016 3/13/2016 (G) Alkane carboxylic acid, hydroxy, hydroxyalkyl-alkyl, polymer with .alpha.- hydro-.omega.-hydroxypoly(oxy-1,2- ethanediyl) ether with alkyl- (hydroxyalkyl)-alkanediol (x:1), .alpha.- hydro-.omega.-hydroxypoly[oxy(alkyl- alkyldiyl)] and alkylenebis [isocyanatoalkane],-blocked. P-15-0737........................... 4/12/2016 4/7/2016 (G) Diammonium salt of phosphate methacrylate. P-15-0737........................... 4/12/2016 4/7/2016 (G) Monoammonium salt of phosphate methacrylate. P-15-0769........................... 4/14/2016 4/4/2016 (G) Polyurethane silane. P-16-0009........................... 4/1/2016 3/9/2016 (S) Fatty acids, castor-oil, esters with polyethylene glycol ether with glycerol (3:1). P-16-0026........................... 4/11/2016 4/3/2016 (G) Amine functional epoxy, organic acid salt. P-16-0100........................... 4/5/2016 3/23/2016 (G) Substituted heteropolycyclic derivs. P-16-0107........................... 4/14/2016 3/27/2016 (G) Aromatic polycarboxylic acid, polymer with alkyldiol, alkylidioic acid, aromatic polyisocyanate, substituted alkyldiol, compd. with alkylamine. P-16-0108........................... 4/28/2016 3/17/2016 (G) Carbonic acid, polymer with, 5- isocyanato-1-(isocyanatomethyl)- 1,3,3- trimethylcyclohexane, 2-hydroxyethyl acrylate-blocked. P-16-0115........................... 4/6/2016 3/27/2016 (G) 2-propanediol, polymer with 2- ethyloxirane, oxirane and cycloaliphatic anhydride, polymer with 2,2???-[(1- methylethylidene)bis(4,1- phenyleneoxymethylene)]bis[oxirane]. P-16-0121........................... 4/18/2016 4/13/2016 (G) Acrylic acid polymer with polyethylene glycol. P-16-0142........................... 4/26/2016 4/20/2016 (G) Amine salted polyacrylate. P-16-0149........................... 4/18/2016 4/15/2016 (G) 2-alkenoic acid, alkyl ester, polymer with ethenyl benzene, alkyl 2-alky alkenoate and alkene carboxylic acid. P-16-0159........................... 4/25/2016 3/31/2016 (G) Hexasodium 5-{4-[3-(8-benzoylamino-1- hydroxy-3,6-disulfonatonaphthalene-2- yldiazenyl)-4-sulfonatoanilino]-6-(2- sulfonatoethylamino)-1,3,5-triazine-2- ylamino{time} benzene-1,3-dicarboxylate. P-16-0174........................... 4/29/2016 4/19/2016 (S) Butanedioic acid, 2-methylene-, telomer with phosphinic acid and sodium 4- ethenylbenzenesulfonate (1:1), sodium salt. P-16-0175........................... 4/28/2016 4/18/2016 (S) Naphthalene, eicosyl-. ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: May 25, 2016. Pamela Myrick, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2016-13028 Filed 6-1-16; 8:45 am] BILLING CODE 6560-50-P
![Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices 35351
Registration Number of interest as B. What should I consider as I prepare Proposed use: Broadcast application to
shown in the body of this document, by my comments for EPA? crops under flooded conditions to
one of the following methods: 1. Submitting CBI. Do not submit this control golden apple snails. Contact:
• Federal eRulemaking Portal: http:// information to EPA through BPPD.
www.regulations.gov. Follow the online regulations.gov or email. Clearly mark 4. EPA Registration Numbers: 71512–
instructions for submitting comments. the part or all of the information that 21, 71512–22, and 71512–23. Docket ID
Do not submit electronically any you claim to be CBI. For CBI number: EPA–HQ–OPP–2016–0263.
information you consider to be information in a disk or CD–ROM that Applicant: ISK Biosciences Corporation,
Confidential Business Information (CBI) you mail to EPA, mark the outside of the 7470 Auburn Road, Suite A, Concord,
or other information whose disclosure is disk or CD–ROM as CBI and then OH 44077. Active ingredient:
restricted by statute. identify electronically within the disk or Isofetamid. Product type: Fungicide.
Proposed uses: Bushberries (subgroup
• Mail: OPP Docket, Environmental CD–ROM the specific information that
is claimed as CBI. In addition to one 13–07B); caneberries (subgroup 13–
Protection Agency Docket Center (EPA/
complete version of the comment that 07A); pome fruit (group 11–10); small
DC), (28221T), 1200 Pennsylvania Ave.
includes information claimed as CBI, a vine climbing fruit (subgroup 13–07E);
NW., Washington, DC 20460–0001.
stone fruit (subgroups 12–12A, 12–12B,
• Hand Delivery: To make special copy of the comment that does not
contain the information claimed as CBI 12–12C); legume vegetable pea and
arrangements for hand delivery or
must be submitted for inclusion in the bean, succulent and dried, except
delivery of boxed information, please
public docket. Information so marked soybeans (subgroups 6A, 6B, 6C);
follow the instructions at http://
will not be disclosed except in ornamental plants. Contact: RD.
www.epa.gov/dockets/contacts.html. 5. EPA Registration Number: 86203–4.
Additional instructions on accordance with procedures set forth in
Docket ID number: EPA–HQ–OPP–
commenting or visiting the docket, 40 CFR part 2.
2016–0128. Applicant: Mitsui
along with more information about 2. Tips for preparing your comments.
Chemicals Agro, Inc. (c/o Landis
dockets generally, is available at http:// When preparing and submitting your
International, Inc., P.O. Box 5126;
www.epa.gov/dockets. comments, see the commenting tips at
Valdosta, GA 31603. Active ingredient:
http://www.epa.gov/dockets/
FOR FURTHER INFORMATION CONTACT: Etofenprox. Product type: Insecticide.
comments.html.
Robert McNally, Biopesticides and Proposed use: Fungi, edible, group 21.
Pollution Prevention Division (BPPD) II. Registration Applications Contact: RD.
(7511P), main telephone number: (703) EPA has received applications to 6. File Symbol: 89186–R. Docket ID
305–7090; email address: register new uses for pesticide products number: EPA–HQ–OPP–2016–0258.
BPPDFRNotices@epa.gov., Susan Lewis, containing currently registered active Applicant: ConidioTec, 2610 Sleepy
Registration Division (RD) (7505P), main ingredients. Pursuant to the provisions Hollow Drive, State College, PA 16803.
telephone number: (703) 305–7090; of FIFRA section 3(c)(4) (7 U.S.C. Active ingredient: Beauveria bassiana
email address: RDFRNotices@epa.gov. 136a(c)(4)), EPA is hereby providing Strain GHA. Product type: Insecticide.
The mailing address for each contact notice of receipt and opportunity to Proposed use: Indoor use in buildings
person is: Office of Pesticide Programs, comment on these applications. Notice and structures to control and prevent
Environmental Protection Agency, 1200 of receipt of these applications does not bedbug infestations. Contact: BPPD.
Pennsylvania Ave. NW., Washington, imply a decision by the Agency on these Authority: 7 U.S.C. 136 et seq.
DC 20460–0001. As part of the mailing applications. Dated: May 19, 2016.
address, include the contact person’s 1. EPA Registration Numbers: 100– Daniel J. Rosenblatt,
name, division, and mail code. The 739, 100–1262, 100–1312, 100–1313, Acting Director, Registration Division, Office
division to contact is listed at the end 100–1476, and 100–1554. Docket ID of Pesticide Programs.
of each application summary. number: EPA–HQ–OPP–2016–0254. [FR Doc. 2016–13029 Filed 6–1–16; 8:45 am]
SUPPLEMENTARY INFORMATION:
Applicant: Syngenta Crop Protection,
BILLING CODE 6560–50–P
LLC, P.O. Box 18300, Greensboro, NC
I. General Information 27419. Active ingredient:
A. Does this action apply to me? Difenoconazole. Product type: ENVIRONMENTAL PROTECTION
Fungicide. Proposed uses: Rice; wild AGENCY
You may be potentially affected by rice; and cotton (crop subgroup 20C).
this action if you are an agricultural Contact: RD. [EPA–HQ–OPPT–2016–0023; FRL–9946–86]
producer, food manufacturer, or 2. EPA Registration Number: 2724–
pesticide manufacturer. The following 804. Docket ID number: EPA–HQ–OPP– Certain New Chemicals; Receipt and
list of North American Industrial 2016–0128. Applicant: Wellmark Status Information for April 2016
Classification System (NAICS) codes is International, 1501 E. Woodfield Road, AGENCY: Environmental Protection
not intended to be exhaustive, but rather Suite 200 West, Schaumburg, IL 60173. Agency (EPA).
provides a guide to help readers Active ingredient: Etofenprox. Product ACTION: Notice.
determine whether this document type: Insecticide. Proposed use: Fungi,
applies to them. Potentially affected edible, group 21. Contact: RD. SUMMARY: EPA is required under the
entities may include: 3. EPA Registration Number: 67702– Toxic Substances Control Act (TSCA) to
asabaliauskas on DSK3SPTVN1PROD with NOTICES
• Crop production (NAICS code 111). 49. Docket ID number: EPA–HQ–OPP– publish in the Federal Register a notice
2016–0256. Applicant: W. Neudorff of receipt of a premanufacture notice
• Animal production (NAICS code
GmbH KG, An der Mühle 3, 31860 (PMN); an application for a test
112).
Emmerthal, Germany (c/o Walter G. marketing exemption (TME), both
• Food manufacturing (NAICS code Talarek, PC, 1008 Riva Ridge Dr., Great pending and/or expired; and a periodic
311). Falls, VA 22066–1620). Active status report on any new chemicals
• Pesticide manufacturing (NAICS ingredient: Iron phosphate. Product under EPA review and the receipt of
code 32532). type: Biochemical molluscicide. notices of commencement (NOC) to
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00059 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35457/page/1.svg)
![Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices 35353
TABLE 1—PMNS RECEIVED FROM APRIL 1, 2016 TO APRIL 29, 2016—Continued
Projected
Date end date for Manufacturer/ Chemical
Case No. Use(s)
received EPA Importer identity
review
P–16–0267 .......... 4/20/2016 7/19/2016 Allnex USA, Inc (S) Electro-deposition primer ....... (G) Fatty acids, reaction products
with alkylamine, polymers with
substituted carbomonocycle,
substituted alkylamines,
heteromonocycle and sub-
stituted alkanoate, lactates
(salts).
P–16–0277 .......... 4/1/2016 6/30/2016 Organic (S) Metalized dye for dyeing wool (S) Chromate(1-), hydroxy[2-(hy-
Dyestuffs Cor- with good fastness properties. droxy-ko)-3-[2-[2-(hydroxy-ko)-
poration. 1-naphthalenyl]diazenyl-kn1]-5-
nitrobenzenesulfonato(3-)]-, so-
dium (1:1).
P–16–0279 .......... 4/4/2016 7/3/2016 Akzo Nobel Sur- (G) Component in paints .............. (S) Hexanamide, n,-[3-
face Chem- (dimethylamino)propyl]-,
istry, LLC. compd, with 2-methyloxirane
polymer with oxirane mono (2-
ethylhexyl) ether phosphate.
P–16–0281 .......... 4/11/2016 7/10/2016 CBI .................... (G) Reactive polyol ...................... (G) Fatty alcohols—dimers, trim-
mers, polymers.
P–16–0287 .......... 4/1/2016 6/30/2016 CBI .................... (G) Hardener for epoxy coating ... (G) Alkanoic acid, 2-substituted-
methyl ester, reaction products
with aromatic diamine-
[alkanediylbi-
s(oxymethylene)]bis[oxirane]
polymer.
P–16–0289 .......... 4/1/2016 6/30/2016 CBI .................... (G) Extrusion compounding resin (G) Semi-aromatic polyamide.
molding resin.
P–16–0290 .......... 4/1/2016 6/30/2016 CBI .................... (G) Fuel additive .......................... (G) Copolymer of maleic acid and
olefin.
P–16–0291 .......... 4/3/2016 7/2/2016 CBI .................... (G) Curing agent .......................... (G) 1,3-
cyclohexanedimethanamine
adduct.
P–16–0292 .......... 4/5/2016 7/4/2016 CBI .................... (S) Intermediate for use in the (G) Depolymerized waste plas-
manufacture of polymers. tics.
P–16–0293 .......... 4/13/2016 7/12/2016 Charkit Chemical (S) Compounding of fragrance for (S) Octanoic acid, phenylmethyl
Corporation. industrial cleaners/janitorial ester.
compounds, detergents, etc.
P–16–0299 .......... 4/20/2016 7/19/2016 CBI .................... (S) Reactive (meth)acrylate (G) Polyurethane, methacrylate-
oligomer for ultra violet cured blocked.
3d printed parts.
P–16–0300 .......... 4/6/2016 7/5/2016 H.B. Fuller Com- (G) Industrial adhesive ................. (G) Oxirane, 2-methyl-, polymer
pany. with 1,3-xylylene diisocyanate
and oxirane, 3-
(trimethoxysilyl)propyl
isocyanate.
P–16–0301 .......... 4/6/2016 7/5/2016 CBI .................... (G) Intermediate ........................... (G) Propyl silsesquioxanes, hy-
drogen-terminated.
P–16–0302 .......... 4/6/2016 7/5/2016 CBI .................... (G) Plastic additive ....................... (G) Organic modified propyl
silsesquioxane.
P–16–0303 .......... 4/7/2016 7/6/2016 CBI .................... (G) Use for the production of (G) Alkyl methyacrylate polymer
acrylic resin for waterborne ex- with styrene, amino acrylate
terior coatings composition. and acrylic acid, ammonium
salt.
P–16–0304 .......... 4/7/2016 7/6/2016 CBI .................... (G) Industrial adhesive ................. (G) Polyurea grease.
P–16–0305 .......... 4/7/2016 7/6/2016 CBI .................... (G) Industrial Adhesive ................ (G) Polyurea grease.
P–16–0307 .......... 4/8/2016 7/7/2016 CBI .................... (G) Open non dispersive use ....... (G) Heteropolycycliccarboxylic
acid, 1,3-dihydro-disubstituted-,
polymer with 1,1’-
asabaliauskas on DSK3SPTVN1PROD with NOTICES
methylenebis[4-
isocyanatobenzene], reaction
products with silica.
P–16–0308 .......... 4/8/2016 7/7/2016 Itaconix Cor- (G) Reactive Monomer ................. (S) Butanedioic acid, 2-meth-
poration. ylene-, 1,4-bis (2-methylpropyl)
ester.
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00061 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35457/page/3.svg)
![35354 Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM APRIL 1, 2016 TO APRIL 29, 2016—Continued
Projected
Date end date for Manufacturer/ Chemical
Case No. Use(s)
received EPA Importer identity
review
P–16–0309 .......... 4/8/2016 7/7/2016 CBI .................... (G) PMN substances are in- (G) Bisamide mixture.
tended for use as rheological or
thixotropic agents used in the
production of solvent based in-
dustrial coatings, high solid aro-
matic paints, adhesives,
sealants, and other types of
paints and topcoats.
P–16–0310 .......... 4/8/2016 7/7/2016 CBI .................... (G) PMN substances are in- (G) Bisamide mixture.
tended for use as rheological or
thixotropic agents used in the
production of solvent based in-
dustrial coatings, high solid aro-
matic paints, adhesives,
sealants, and other types of
paints and topcoats.
P–16–0311 .......... 4/8/2016 7/7/2016 CBI .................... (S) Coatings for wood metal and (G) Aromatic dicarboxylic acid,
plastic. polymer with alkyl dicarcoxylic
acid, alkyl diol, hydroxy(hydro
xyalkyl)alkylcarboxylic acid,
methylenebis(isocyanato
cycloalkane) and alkyle
thylidene bis(phenyleneoxy)
bis[alkyl alcohol].
P–16–0312 .......... 4/8/2016 7/7/2016 CBI .................... (S) Coatings for wood metal and (G) Aromatic dicarboxylic acid,
plastic. polymer with
cycloalkanemethanol,
alkanediamine, alkanedioic
acid, hydroxy-2-(hydroxyalkyl)-
2-alkylcarboxylic acid, methyl
enebis[isocyanatocycloalkane]
and [(methylethylidene)bis
(phenyleneoxy)]bis[alkanol].
P–16–0313 .......... 4/11/2016 7/10/2016 Honeyol, Inc ...... (S) Use in production of resins (S) Tar acids (shale oil), c6–9-
(raw material used in the pro- fraction, alkylphenols, low-boil-
duction of resins). ing.
P–16–0314 .......... 4/11/2016 7/10/2016 Firmenich, Inc ... (G) As part of a fragrance formula (S) Ethanone, 1-(5-propyl-1,3-
benzodioxol-2-yl)-
P–16–0315 .......... 4/11/2016 7/10/2016 CBI .................... (S) Industrial rubber formulation .. (G) Alkyldiene, polymer, termi-
nated
alkoxysilylalkylcarbamate.
P–16–0316 .......... 4/11/2016 7/10/2016 CBI .................... (G) Drilling chemical ..................... (G) Aliphatic polyester.
P–16–0317 .......... 4/11/2016 7/10/2016 CBI .................... (G) Drilling chemical ..................... (G) Aliphatic polyester.
P–16–0322 .......... 4/22/2016 7/21/2016 CBI .................... (G) Pulp bleaching catalyst .......... (G) Manganese cyclic (tri)amine
chloride complex.
P–16–0322 .......... 4/22/2016 7/21/2016 CBI .................... (G) Textile bleaching catalyst ...... (G) Manganese cyclic (tri)amine
chloride complex.
P–16–0323 .......... 4/13/2016 7/12/2016 Allnex USA, Inc (G) Coating resin .......................... (G) Alkylaldehyde, reaction prod-
ucts with substituted
carbomonocycle-substituted
heteromonocycle-alkylene gly-
col bis [[[substituted
(oxoneoalky)oxy]alkyl]amino
]alky] ether polymer and alkyl
substituted alkanediamine, ace-
tate salts.
P–16–0324 .......... 4/13/2016 7/12/2016 CBI .................... (G) Adhesive for open non-de- (G) Ultra violet-curable urethane
scriptive use. acrylate.
asabaliauskas on DSK3SPTVN1PROD with NOTICES
P–16–0325 .......... 4/13/2016 7/12/2016 CBI .................... (G) Oil & Gas extraction .............. (G) Polymer of substituted acrylic
acid and bromohexane.
P–16–0326 .......... 4/27/2016 7/26/2016 Firmenich, Inc ... (G) As part of a fragrance formula (S) Propanoic acid, 2,2-dimethyl-
,1-methyl-2-(1-methylethoxy)-2-
oxoethyl ester.
P–16–0327 .......... 4/14/2016 7/13/2016 CBI .................... (G) Additive in rubber tires ........... (G) Alkenoic acid, polymer with
alkylalkenoate, sodium salt.
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00062 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35457/page/4.svg)
![Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices 35355
TABLE 1—PMNS RECEIVED FROM APRIL 1, 2016 TO APRIL 29, 2016—Continued
Projected
Date end date for Manufacturer/ Chemical
Case No. Use(s)
received EPA Importer identity
review
P–16–0328 .......... 4/19/2016 7/18/2016 CBI .................... (G) Intermediate ........................... (G) Terephthalic acid, polymer
with alkanepolycarboxylic acids,
alkanepolyols, isophthalic acid,
polyetherpolyol, 1,1-
methylenebis
[isocyanatobenzene], phthalic
anhydride and a substituted
alkanepolyol.
P–16–0329 .......... 4/19/2016 7/18/2016 CBI .................... (G) Adhesive component ............. (G) Polymer of
alkanepolycarboxylic acids,
alkanepolyols, isophthalic acid,
polyetherpolyols, 1,1-
methylenebis[isocyanatoben-
zene], terephthalic acid, phthal-
ic anhydride and a substituted
alkanepolyol.
P–16–0330 .......... 4/19/2016 7/18/2016 H.B. Fuller Com- (G) Industrial adhesive ................. (G) Hydroxy functional triglyceride
pany. polymer with glycerol mono-
ester and 1,1’-methylenebis[4-
isocyanatobenzene].
P–16–0331 .......... 4/19/2016 7/18/2016 H.B. Fuller Com- (G) Industrial adhesive ................. (G) Hydroxy functional triglyceride
pany. polymer with glycerol mono-
ester and 1,1’-methylenebis
[isocyanatobenzene].
P–16–0332 .......... 4/21/2016 7/20/2016 CBI .................... (G) Component of coating ........... (G) Carbomonocycle phosphate
metal salt.
P–16–0334 .......... 4/22/2016 7/21/2016 Lamberti USA, (G) Additive for industrial pur- (G) Polymeric amide.
Inc. poses.
P–16–0335 .......... 4/22/2016 7/21/2016 Lamberti USA, (G) Additive for industrial pur- (G) Polymeric amide.
Inc. poses.
P–16–0336 .......... 4/22/2016 7/21/2016 CBI .................... (G) Fuel additive—destructive use (G) Polyolefin ester.
P–16–0337 .......... 4/25/2016 7/24/2016 CBI .................... (S) Monomer ................................ (G) Aliphatic acrylate.
P–16–0338 .......... 4/26/2016 7/25/2016 CBI .................... (G) Dyestuff .................................. (G) Substituted xanthene deriva-
tive.
P–16–0339 .......... 4/26/2016 7/25/2016 CBI .................... (G) Dyestuff .................................. (G) Azo derivatives.
P–16–0340 .......... 4/26/2016 7/25/2016 Solazyme, Inc ... (G) Feedstock for oleochemical (G) Glycerides, c8–18 and c18
industry. unsaturated, from fermentation.
P–16–0340 .......... 4/26/2016 7/25/2016 Solazyme, Inc ... (G) Renewable oil source for (G) Glycerides, c8–18 and c18
fuels. unsaturated, from fermentation.
P–16–0341 .......... 4/27/2016 7/26/2016 Perstorp Polyols (G) Elastomer ............................... (S) 2-oxepanone, homopolymer,
ester with 1,6-hexanediol.
P–16–0341 .......... 4/27/2016 7/26/2016 Perstorp Polyols (S) Industrial coatings .................. (S) 2-oxepanone, homopolymer,
ester with 1,6-hexanediol.
P–16–0341 .......... 4/27/2016 7/26/2016 Perstorp Polyols (S) Adhesive components ............ (S) 2-oxepanone, homopolymer,
ester with 1,6-hexanediol.
P–16–0342. ......... 4/27/2016 7/26/2016 CBI .................... (S) Modified acrylic polymer used (G) Modified acrylic polymer.
as a dispersant for
deflocculation of pigments in in-
dustrial paints and coatings.
P–16–0343 .......... 4/27/2016 7/26/2016 CBI .................... (S) Modified urethane polymer (G) Modified urethane polymer.
used as a dispersant for
deflocculation of pigments in in-
dustrial paints and coatings.
P–16–0344 .......... 4/27/2016 7/26/2016 CBI .................... (S) Modified acrylic polymer used (G) Modified urethane polymer.
as a dispersant for
deflocculation of pigments in in-
dustrial paints and coatings.
P–16–0345 .......... 4/28/2016 7/27/2016 CBI .................... (G) Processing aid ....................... (G) Acrylamide, polymer with
methacrylic acid derivatives.
asabaliauskas on DSK3SPTVN1PROD with NOTICES
For the 31 NOCs received by EPA The EPA case number assigned to the submitter in the NOC; and the chemical
during this period, Table 2 provides the NOC; the date the NOC was received by identity.
following information (to the extent that EPA; the projected date of
such information is not claimed as CBI): commencement provided by the
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35457/page/5.svg)
![35356 Federal Register / Vol. 81, No. 106 / Thursday, June 2, 2016 / Notices
TABLE 2—NOCS RECEIVED FROM APRIL 1, 2016 TO APRIL 29, 2016
Projected
Date date of
Case No. Chemical identity
received commence-
ment
P–05–0522 ................... 4/26/2016 3/31/2016 (S) [1,1’-biphenyl]-4-carboxaldehyde.
P–11–0243 ................... 4/1/2016 3/12/2016 (G) Alkanedioic acid polymer with alkanediol and diisocyanatohexane.
P–13–0670 ................... 4/25/2016 4/4/2016 (G) Alkyl-[4-(carbomonocyclesubstituted)carbomonocycle]-(dialkyl-
hydroxycarbomonocycle)alkane derivative.
P–13–0671 ................... 4/25/2016 4/4/2016 (G) Alkyl-[4-(carbomonocyclesubstituted)carbomonocycle]-(dialkyl-
hydroxycarbomonocycle)alkane derivative.
P–14–0166 ................... 4/4/2016 3/3/2016 (G) Fatty acid amide.
P–14–0185 ................... 4/4/2016 3/5/2016 (G) Fatty acid amide acetate.
P–14–0800 ................... 4/22/2016 4/11/2016 (G) Solvent red 252.
P–15–0046 ................... 4/12/2016 4/1/2016 (S) Propanol, oxybis, polymer with bis(isocyanatomethyl)cyclohexane and alpha-
hydro-omega-hydroxypoly(oxy-1,4-butanediyl).
P–15–0074 ................... 4/8/2016 3/30/2016 (G) Trisiloxane alkoxylate.
P–15–0329 ................... 4/12/2016 3/12/2016 (S) Urea, n, n‘‘-1,6-hexanediylbis[n’-[(1s)-1-phenylethyl]-.
P–15–0382 ................... 4/29/2016 4/20/2016 (G) Polyitaconic acid, sodium zinc salt.
P–15–0409 ................... 4/5/2016 3/24/2016 (G) Substituted alkanolamine ether.
P–15–0515 ................... 4/19/2016 4/7/2016 (G) 2-propenoic acid, 2-methyl, methyl ester, polymer with ethenylbenzene, ethyl 2-
propenoate, 2-oxiranylmethyl 2-methyl-2-propenoate and 1,2-propanediol
mono(2-methyl-2-propenoate), reaction products with dialkylamine, carboxylate
salt.
P–15–0567 ................... 4/8/2016 3/10/2016 (S) Hexanedioic acid, polymer with 1,?6-?hexanediol, 1,?3-?isobenzofurandione, 5-
?isocyanato-?1-?(isocyanatomethyl)?-?1,?3,?3-?trimethylcyclohexane and
1,?2,?3-?propanetriol, 2-?hydroxyethyl acrylate-?blocked.
P–15–0623 ................... 4/18/2016 4/14/2016 (G) Fatty acids, polymers with bisphenol a, nutshell liq., epichlorohydrin,
alkylenediamine, formaldehyde and polyalkylenepolyamine.
P–15–0733 ................... 4/4/2016 3/13/2016 (G) Alkane carboxylic acid, hydroxy, hydroxyalkyl-alkyl, polymer with .alpha.-hydro-
.omega.-hydroxypoly(oxy-1,2-ethanediyl) ether with alkyl-(hydroxyalkyl)-alkanediol
(x:1), .alpha.-hydro-.omega.-hydroxypoly[oxy(alkyl-alkyldiyl)] and alkylenebis
[isocyanatoalkane],-blocked.
P–15–0737 ................... 4/12/2016 4/7/2016 (G) Diammonium salt of phosphate methacrylate.
P–15–0737 ................... 4/12/2016 4/7/2016 (G) Monoammonium salt of phosphate methacrylate.
P–15–0769 ................... 4/14/2016 4/4/2016 (G) Polyurethane silane.
P–16–0009 ................... 4/1/2016 3/9/2016 (S) Fatty acids, castor-oil, esters with polyethylene glycol ether with glycerol (3:1).
P–16–0026 ................... 4/11/2016 4/3/2016 (G) Amine functional epoxy, organic acid salt.
P–16–0100 ................... 4/5/2016 3/23/2016 (G) Substituted heteropolycyclic derivs.
P–16–0107 ................... 4/14/2016 3/27/2016 (G) Aromatic polycarboxylic acid, polymer with alkyldiol, alkylidioic acid, aromatic
polyisocyanate, substituted alkyldiol, compd. with alkylamine.
P–16–0108 ................... 4/28/2016 3/17/2016 (G) Carbonic acid, polymer with, 5-isocyanato-1-(isocyanatomethyl)- 1,3,3-
trimethylcyclohexane, 2-hydroxyethyl acrylate-blocked.
P–16–0115 ................... 4/6/2016 3/27/2016 (G) 2-propanediol, polymer with 2-ethyloxirane, oxirane and cycloaliphatic anhy-
dride, polymer with 2,2???-[(1-methylethylidene)bis(4,1-
phenyleneoxymethylene)]bis[oxirane].
P–16–0121 ................... 4/18/2016 4/13/2016 (G) Acrylic acid polymer with polyethylene glycol.
P–16–0142 ................... 4/26/2016 4/20/2016 (G) Amine salted polyacrylate.
P–16–0149 ................... 4/18/2016 4/15/2016 (G) 2-alkenoic acid, alkyl ester, polymer with ethenyl benzene, alkyl 2-alky
alkenoate and alkene carboxylic acid.
P–16–0159 ................... 4/25/2016 3/31/2016 (G) Hexasodium 5-{4-[3-(8-benzoylamino-1-hydroxy-3,6-disulfonatonaphthalene-2-
yldiazenyl)-4-sulfonatoanilino]-6-(2-sulfonatoethylamino)-1,3,5-triazine-2-
ylamino}benzene-1,3-dicarboxylate.
P–16–0174 ................... 4/29/2016 4/19/2016 (S) Butanedioic acid, 2-methylene-, telomer with phosphinic acid and sodium 4-
ethenylbenzenesulfonate (1:1), sodium salt.
P–16–0175 ................... 4/28/2016 4/18/2016 (S) Naphthalene, eicosyl-.
Authority: 15 U.S.C. 2601 et seq. FEDERAL DEPOSIT INSURANCE In calling the meeting, the Board
Dated: May 25, 2016. CORPORATION determined, on motion of Director
Pamela Myrick, Richard Cordray (Director, Consumer
Sunshine Act Meeting Financial Protection Bureau), seconded
Acting Director, Information Management
Division, Office of Pollution Prevention and
by Vice Chairman Thomas M. Hoenig,
Pursuant to the provisions of the
asabaliauskas on DSK3SPTVN1PROD with NOTICES
Toxics. concurred in by Paul M. Nash (Acting
‘‘Government in the Sunshine Act’’ (5
[FR Doc. 2016–13028 Filed 6–1–16; 8:45 am]
in the place and stead of Director
U.S.C. 552b), notice is hereby given that
Thomas J. Curry (Comptroller of the
BILLING CODE 6560–50–P at 10:03 a.m. on Tuesday, May 31, 2016,
Currency)), and Chairman Martin J.
the Board of Directors of the Federal
Deposit Insurance Corporation met in Gruenberg, that Corporation business
closed session to consider matters required its consideration of the matters
related to the Corporation’s supervision, which were to be the subject of this
corporate, and resolution activities. meeting on less than seven days’ notice
VerDate Sep<11>2014 18:30 Jun 01, 2016 Jkt 238001 PO 00000 Frm 00064 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1](https://thefederalregister.org/doc/81_FR_35457/page/6.svg)
Document Created: 2016-06-02 01:22:54
Document Modified: 2016-06-02 01:22:54
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before July 5, 2016. | |
| Contact | For technical information contact: Jim Rahai, Information Management Division, 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: | |
| FR Citation | 81 FR 35351 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR