81 FR 54661 - Hazardous Materials: Termination of Competent Authority Manufacturing Approvals

DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration

Federal Register Volume 81, Issue 158 (August 16, 2016)

Page Range		54661-54662
FR Document		2016-19414

This notice is to advise interested persons that PHMSA has terminated the manufacturing approvals listed herein. In November 2014, PHMSA attempted to contact all of the below listed manufacturing approval holders via written correspondence. In July 2015, PHMSA issued a Show Cause letter via certified mail requesting a response within 30 days with their intent with respect to the approval. None of the companies complied with the requirements of the letter. Thus, PHMSA issued a Termination letter via certified mail in January 2016. To date, PHMSA has not received any correspondence concerning the below listed approval numbers.

Federal Register, Volume 81 Issue 158 (Tuesday, August 16, 2016)

[Federal Register Volume 81, Number 158 (Tuesday, August 16, 2016)]
[Notices]
[Pages 54661-54662]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2016-19414]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2016-0040; Notice No. 2016-04]


Hazardous Materials: Termination of Competent Authority 
Manufacturing Approvals

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice is to advise interested persons that PHMSA has 
terminated the manufacturing approvals listed herein. In November 2014, 
PHMSA attempted to contact all of the below listed manufacturing 
approval holders via written correspondence. In July 2015, PHMSA issued 
a Show Cause letter via certified mail requesting a response within 30 
days with their intent with respect to the approval. None of the 
companies complied with the requirements of the letter. Thus, PHMSA 
issued a Termination letter via certified mail in January 2016. To 
date, PHMSA has not received any correspondence concerning the below 
listed approval numbers.

FOR FURTHER INFORMATION CONTACT: Mr. Ryan Paquet, Director, Approvals 
and Permits Division, Office of Hazardous Materials Safety, (202) 366-
4512, PHMSA, 1200 New Jersey Avenue SE., Washington, DC 20590 or at 
[email protected].
    Correspondence with respect to the below listed approval numbers 
should be sent to [email protected] with a subject line ``Termination 
Letter'' and should be in writing; state in detail any alleged errors 
of fact and law; enclose any additional information needed to support 
the request; and state in detail the modification of the final decision 
sought.

SUPPLEMENTARY INFORMATION:

I. Introduction

    In this notice, PHMSA's Approvals and Permits Division is 
terminating the approvals listed below based on a change in 
circumstances rendering the approval no longer necessary (49 CFR 
107.713(b)(1)); and/or violations of your approval and the HMR that 
demonstrate a lack of fitness (49 CFR 107.713(b)(4)).

II. Background

    In November 2014, the Office of Hazardous Materials Safety Field 
Operations (OHMSFO) mailed a letter requesting approval status of the 
companies listed below. The companies listed below did not respond to 
the November 2014 request for information. In July 2015, PHMSA mailed a 
Show Cause letter to each of the companies listed below, requesting 
current approval status. The companies below did not respond to the 
Show Cause letter. In January 2016, PHMSA issued a Termination letter 
to each company listed below. To date, PHMSA has not received any 
correspondence from these companies. This Federal Register notice 
serves as an official announcement of termination of those approvals.

III. Action

    PHMSA has terminated the below listed approvals, and this Federal 
Register notice serves as an official announcement to the public.

IV. Approvals Terminated

------------------------------------------------------------------------
              ID No.                      Approval holder/company
------------------------------------------------------------------------
300b-87-03                         Industrias Vengas, S. A.
300b-96-02                         Tanques Para Gas, S.A.
300b-87-01                         Kanto Koatsu Yoki Mfg. Co.
807-06-01                          Hulett Cylinders
807-04-06                          Finetec Corporation
807-04-04                          Changzhou Aircraft Manufacture Co.
                                    Ltd.
300b-96-03                         Tanques Industriales Lajat, SA DE CV.
300b-92-02                         Chengdu High Pressure Vessel Factory.
807-07-01                          DACC Co., Ltd.
807-08-04                          Guangming Overseas Chinese Farms.
300b-84-03                         Primus Sievert AB.
300b-78-03                         MCS Cylinder Systems GmbH.
807-08-01                          Yongkang Yingpeng Chemical Machinery
                                    Co., Ltd.
300b-88-01                         Implementos Agricolas LA, S.A.
300b-98-03                         ROTH S.A.
300b-94-05                         ISI GmbH.
300b-83-02                         Cilbras.
300b-89-03                         Wolfedale Engineering Limited.
300b-93-02                         DDI Seamless Cylinder International
                                    Inc.
300b-88-02                         Bruin Engineered Parts, Inc.
807-04-01                          Yuxin Machinery Co., Ltd.
------------------------------------------------------------------------



[[Page 54662]]

    Issued in Washington, DC, on August 10, 2016, under authority 
delegated in 49 CFR part 107.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety 
Administration.
[FR Doc. 2016-19414 Filed 8-15-16; 8:45 am]
BILLING CODE 4910-60-P

Federal Register / Vol. 81, No. 158 / Tuesday, August 16, 2016 / Notices 54661

Materials Safety, (202) 366–4512, Issued in Washington, DC, on August 10, change in circumstances rendering the
PHMSA, 1200 New Jersey Avenue SE., 2016, under authority delegated in 49 CFR approval no longer necessary (49 CFR
Washington, DC 20590 or at part 107. 107.713(b)(1)); and/or violations of your
approvals@dot.gov. William S. Schoonover, approval and the HMR that demonstrate
Deputy Associate Administrator, Pipeline and a lack of fitness (49 CFR 107.713(b)(4)).
Correspondence with respect to the Hazardous Materials Safety Administration.
below listed approval numbers should II. Background
[FR Doc. 2016–19415 Filed 8–15–16; 8:45 am]
be sent to approvals@dot.gov with a
BILLING CODE 4910–60–P
subject line ‘‘Termination Letter’’ and In November 2014, the Office of
should be in writing; state in detail any Hazardous Materials Safety Field
alleged errors of fact and law; enclose DEPARTMENT OF TRANSPORTATION Operations (OHMSFO) mailed a letter
any additional information needed to requesting approval status of the
support the request; and state in detail Pipeline and Hazardous Materials companies listed below. The companies
the modification of the final decision Safety Administration listed below did not respond to the
sought. November 2014 request for information.
[Docket No. PHMSA–2016–0040; Notice No.
2016–04]
In July 2015, PHMSA mailed a Show
SUPPLEMENTARY INFORMATION:
Cause letter to each of the companies
I. Introduction Hazardous Materials: Termination of listed below, requesting current
Competent Authority Manufacturing approval status. The companies below
In this notice, PHMSA’s Approvals Approvals did not respond to the Show Cause
and Permits Division is terminating the letter. In January 2016, PHMSA issued
approvals listed below based on a AGENCY: Pipeline and Hazardous a Termination letter to each company
change in circumstances rendering the Materials Safety Administration listed below. To date, PHMSA has not
approval no longer necessary (49 CFR (PHMSA), DOT. received any correspondence from these
107.713(b)(1)); and/or violations of your ACTION: Notice. companies. This Federal Register notice
approval and the HMR that demonstrate serves as an official announcement of
a lack of fitness (49 CFR 107.713(b)(4)). SUMMARY: This notice is to advise
termination of those approvals.
interested persons that PHMSA has
II. Background terminated the manufacturing approvals III. Action
listed herein. In November 2014,
On March 17, 2014, PHMSA held a PHMSA has terminated the below
PHMSA attempted to contact all of the
mandatory Designated Approvals listed approvals, and this Federal
below listed manufacturing approval
Agency (DAA) meeting. In May 2015, Register notice serves as an official
holders via written correspondence. In
PHMSA mailed a Show Cause letter to announcement to the public.
July 2015, PHMSA issued a Show Cause
each DAA that did not attend this letter via certified mail requesting a
meeting, requesting the DAA provide IV. Approvals Terminated
response within 30 days with their
current operating status. The companies intent with respect to the approval.
below did not respond to the Show None of the companies complied with
ID No. Approval holder/company
Cause letter. In December 2015, PHMSA the requirements of the letter. Thus,
issued a Termination letter to each DAA 300b–87–03 Industrias Vengas, S. A.
PHMSA issued a Termination letter via 300b–96–02 Tanques Para Gas, S.A.
listed below. As of January 1, 2016, certified mail in January 2016. To date,
PHMSA has not received any 300b–87–01 Kanto Koatsu Yoki Mfg. Co.
PHMSA has not received any 807–06–01 Hulett Cylinders
correspondence from these DAAs, and correspondence concerning the below
PHMSA terminated the approvals of the 807–04–06 Finetec Corporation
listed approval numbers. 807–04–04 Changzhou Aircraft Manufac-
approval holders listed below. This
FOR FURTHER INFORMATION CONTACT: Mr. ture Co. Ltd.
Federal Register notice serves as an
Ryan Paquet, Director, Approvals and 300b–96–03 Tanques Industriales Lajat,
official announcement of termination of SA DE CV.
those approvals. Permits Division, Office of Hazardous
Materials Safety, (202) 366–4512, 300b–92–02 Chengdu High Pressure Ves-
III. Action PHMSA, 1200 New Jersey Avenue SE., sel Factory.
Washington, DC 20590 or at approvals@ 807–07–01 DACC Co., Ltd.
PHMSA has terminated the below dot.gov. 807–08–04 Guangming Overseas Chi-
listed approvals, and this Federal nese Farms.
Correspondence with respect to the
Register notice serves as an official 300b–84–03 Primus Sievert AB.
below listed approval numbers should
announcement to the public. 300b–78–03 MCS Cylinder Systems
be sent to approvals@dot.gov with a GmbH.
IV. Approvals Terminated subject line ‘‘Termination Letter’’ and 807–08–01 Yongkang Yingpeng Chemical
should be in writing; state in detail any Machinery Co., Ltd.
ID No. Approval holder/company alleged errors of fact and law; enclose 300b–88–01 Implementos Agricolas LA,
any additional information needed to S.A.
107–94–01 ... Pacific Marine Repair, Inc. support the request; and state in detail 300b–98–03 ROTH S.A.
asabaliauskas on DSK3SPTVN1PROD with NOTICES

IM–9703 ....... TDI, Inc. the modification of the final decision 300b–94–05 ISI GmbH.
IA–0301 ........ ATech Engineering. sought. 300b–83–02 Cilbras.
IM–9603 ....... Unicon International. 300b–89–03 Wolfedale Engineering Lim-
SUPPLEMENTARY INFORMATION:
IA–8105 ........ British Engine. ited.
IM–9602 ....... Commercial Union Insur- I. Introduction 300b–93–02 DDI Seamless Cylinder Inter-
ance Company. national Inc.
In this notice, PHMSA’s Approvals 300b–88–02 Bruin Engineered Parts, Inc.
IA–0401 ........ Trimac Transportation Serv-
ices, Inc.
and Permits Division is terminating the 807–04–01 Yuxin Machinery Co., Ltd.
approvals listed below based on a

VerDate Sep<11>2014 20:05 Aug 15, 2016 Jkt 238001 PO 00000 Frm 00112 Fmt 4703 Sfmt 4703 E:\FR\FM\16AUN1.SGM 16AUN1

54662 Federal Register / Vol. 81, No. 158 / Tuesday, August 16, 2016 / Notices

Issued in Washington, DC, on August 10, agencies furnish reports to the IRS DEPARTMENT OF THE TREASURY
2016, under authority delegated in 49 CFR describing their safeguards.
part 107. Submission for OMB Review;
William S. Schoonover,
Current Actions: There are no changes
Comment Request
being made to Publication 1075 at this
Deputy Associate Administrator, Pipeline and
Hazardous Materials Safety Administration. time. August 11, 2016.
[FR Doc. 2016–19414 Filed 8–15–16; 8:45 am] Type of Review: Extension of a The Department of the Treasury will
BILLING CODE 4910–60–P currently approved collection. submit the following information
collection request to the Office of
Affected Public: Business or other for-
Management and Budget (OMB) for
profit organizations, not-for-profit review and clearance in accordance
DEPARTMENT OF THE TREASURY institutions, and Federal, state, local, or with the Paperwork Reduction Act of
tribal governments. 1995, Public Law 104–13, on or after the
Internal Revenue Service
Estimated Number of Respondents: date of publication of this notice.
Proposed Collection; Comment 5,100. DATES: Comments should be received on
Request for Publication 1075 Estimated Time per Respondent: 40 or before September 15, 2016 to be
hours. assured of consideration.
AGENCY: Internal Revenue Service (IRS),
Estimated Total Annual Burden ADDRESSES: Send comments regarding
Treasury.
Hours: 204,000. the burden estimates, or any other
ACTION: Notice and request for aspect of the information collection,
comments. The following paragraph applies to all including suggestions for reducing the
of the collections of information covered burden, to (1) Office of Information and
SUMMARY: The Department of the by this notice:
Treasury, as part of its continuing effort Regulatory Affairs, Office of
to reduce paperwork and respondent An agency may not conduct or Management and Budget, Attention:
burden, invites the general public and sponsor, and a person is not required to Desk Officer for Treasury, New
other Federal agencies to take this respond to, a collection of information Executive Office Building, Room 10235,
opportunity to comment on proposed unless the collection of information Washington, DC 20503, or email at
and/or continuing information displays a valid OMB control number. OIRA_Submission@OMB.EOP.gov and
collections, as required by the Books or records relating to a collection (2) Treasury PRA Clearance Officer,
Paperwork Reduction Act of 1995, of information must be retained as long 1750 Pennsylvania Ave. NW., Suite
Public Law 104–13(44 U.S.C. as their contents may become material 8117, Washington, DC 20220, or email
3506(c)(2)(A)). Currently, the IRS is in the administration of any internal at PRA@treasury.gov.
soliciting comments concerning revenue law. Generally, tax returns and FOR FURTHER INFORMATION CONTACT:
Publication 1075, Tax Information tax return information are confidential, Copies of the submission may be
Security Guidelines for Federal, State, as required by 26 U.S.C. 6103. obtained by emailing PRA@treasury.gov,
and Local Agencies. calling (202) 622–1295, or viewing the
Request for Comments: Comments entire information collection request at
DATES: Written comments should be submitted in response to this notice will
received on or before October 17, 2016 www.reginfo.gov.
be summarized and/or included in the
to be assured of consideration. request for OMB approval. All Departmental Offices
ADDRESSES: Direct all written comments comments will become a matter of OMB Control Number: 1505–0016.
to Tuawana Pinkston, Internal Revenue public record. Comments are invited on: Type of Review: Revision of a
Service, Room 6527, 1111 Constitution (a) Whether the collection of currently approved collection.
Avenue NW., Washington, DC 20224. information is necessary for the proper Title: Treasury International Capital
FOR FURTHER INFORMATION CONTACT: performance of the functions of the Form BQ–1, ‘‘Report of Customers’ U.S.
Requests for additional information or agency, including whether the Dollar Claims on Foreign Residents’’.
copies of the publication should be information shall have practical utility; Form: Form BQ–1.
directed to R. Joseph Durbala, at Internal (b) the accuracy of the agency’s estimate Abstract: Form BQ–1 is required by
Revenue Service, Room 6129, 1111 of the burden of the collection of law and is designed to collect timely
Constitution Avenue NW., Washington, information; (c) ways to enhance the information on international portfolio
DC 20224, or at (202) 317–5746, or quality, utility, and clarity of the capital movements, in particular U.S.
through the Internet at information to be collected; (d) ways to dollar claims of customers of U.S.
RJoseph.Durbala@irs.gov. resident financial institutions on foreign
minimize the burden of the collection of
SUPPLEMENTARY INFORMATION: residents. The information is necessary
information on respondents, including
Title: Tax Information Security in the computation of the U.S. balance
through the use of automated collection
Guidelines for Federal, State, and Local of payments accounts and the U.S.
techniques or other forms of information international investment position, and
Agencies. technology; and (e) estimates of capital
OMB Number: 1545–0962. in the formulation of U.S. international
or start-up costs and costs of operation, financial and monetary policies.
Form Number: Publication 1075.
maintenance, and purchase of services Affected Public: Businesses or other
Abstract: Section 6103(p) of the
asabaliauskas on DSK3SPTVN1PROD with NOTICES

to provide information. for-profits.
Internal Revenue Code requires the
Internal Revenue Service to provide Approved: August 9, 2016. Estimated Total Annual Burden
periodic reports to Congress describing R. Joseph Durbala, Hours: 1,492.
safeguard procedures utilized by IRS, Tax Analyst. OMB Control Number: 1505–0017.
agencies which receive information [FR Doc. 2016–19453 Filed 8–15–16; 8:45 am]
Type of Review: Revision of a
from the IRS to protect the currently approved collection.
BILLING CODE 4830–01–P
confidentially of the information. This Title: Treasury International Capital
Code section also requires that these Form BC, ‘‘Report of U.S. Dollar Claims

VerDate Sep<11>2014 18:36 Aug 15, 2016 Jkt 238001 PO 00000 Frm 00113 Fmt 4703 Sfmt 4703 E:\FR\FM\16AUN1.SGM 16AUN1

Document Created: 2016-08-16 03:20:09
Document Modified: 2016-08-16 03:20:09

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Notices
Action		Notice.
Contact		Mr. Ryan Paquet, Director, Approvals and Permits Division, Office of Hazardous Materials Safety, (202) 366- 4512, PHMSA, 1200 New Jersey Avenue SE., Washington, DC 20590 or at [email protected]
FR Citation		81 FR 54661

81 FR 54661 - Hazardous Materials: Termination of Competent Authority Manufacturing Approvals

DEPARTMENT OF TRANSPORTATIONPipeline and Hazardous Materials Safety Administration

Federal Register Volume 81, Issue 158 (August 16, 2016)

DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration