81 FR 64436 - Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India)
DEPARTMENT OF COMMERCE
International Trade Administration Federal Register Volume 81, Issue 182 (September 20, 2016)
International Trade Administration
Federal Register Volume 81, Issue 182 (September 20, 2016)
| Page Range | 64436-64439 | |
| FR Document | 2016-22614 |
[Federal Register Volume 81, Number 182 (Tuesday, September 20, 2016)] [Notices] [Pages 64436-64439] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-22614] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE International Trade Administration [C-351-844, C-533-866, C-580-882] Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India) AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce SUMMARY: Based on affirmative final determinations by the Department of Commerce (the Department) and the International Trade Commission (ITC), the Department is issuing countervailing duty (CVD) orders on certain cold-rolled steel flat products (cold-rolled steel) from Brazil, India, and the Republic of Korea (Korea). In addition, the Department is amending its final affirmative determination with respect to Korea to correct the rates assigned to Hyundai Steel Co., Ltd. (Hyundai Steel), POSCO, and All Others. DATES: Effective September 20, 2016. FOR FURTHER INFORMATION CONTACT: Sergio Balbontin at (202) 482-6478 (Brazil); Robert Bolling at (202) 482-3434 (India); and Emily Maloof at (202) 482-5649 (Korea); AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230. SUPPLEMENTARY INFORMATION: Background In accordance with sections 705(a) and 777(i)(1) of the Tariff Act of 1930, as amended (the Act), on July 20, 2016, the Department made final determinations that countervailable subsidies are being provided to producers and exporters of cold-rolled steel from Brazil, India, and Korea. Pursuant to section 705(d) of the Act, the Department published the affirmative final determinations on July 29, 2016.\1\ --------------------------------------------------------------------------- \1\ See Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from Brazil: Final Affirmative Determination, 81 FR 49940 (July 29, 2016) (Brazil CVD Final Determination); Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from India: Final Affirmative Determination, 81 FR 49932 (July 29, 2016) (India CVD Final Determination); and Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Final Affirmative Determination, 81 FR 49943 (July 29, 2016) (Korea CVD Final Determination). --------------------------------------------------------------------------- On July 27, 2016, Usinas Siderurgicas de Minas Gerais S.A. (Usiminas) timely filed ministerial error comments, alleging that the Department made errors in the final determination of the CVD investigation of cold-rolled steel from Brazil. No other interested party submitted ministerial error allegations or rebuttals to Usiminas' submission. We analyzed the allegations submitted by Usiminas and determined that only one of the three alleged errors is a ministerial error, as defined by section 705(e) of the Act, and 19 CFR 351.224(f).\2\ However, we determined that correcting the ministerial error within the calculations does not change the overall rate for Usiminas.\3\ --------------------------------------------------------------------------- \2\ See Department Memorandum regarding ``Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from Brazil: Ministerial Error Allegation for the Final Determination,'' dated August 24, 2016 (Brazil Ministerial Error Decision Memorandum). \3\ Id. --------------------------------------------------------------------------- On July 27, 2016, Hyundai Steel and POSCO timely filed ministerial error comments, alleging that the Department made errors in the final determination of the CVD investigation of cold-rolled steel from Korea. No other interested party submitted ministerial error allegations or rebuttals to Hyundai Steel's and POSCO's submissions. We analyzed the allegations submitted by [[Page 64437]] Hyundai Steel and POSCO, and determined that ministerial errors exist, as defined by section 705(e) of the Act and 19 CFR 351.224(f).\4\ See ``Amendment to the Korea Final Determination'' section below for further discussion. --------------------------------------------------------------------------- \4\ See Department Memorandum regarding ``Countervailing Duty Investigation: Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Response to Ministerial Error Comments filed by Hyundai Steel Co., Ltd. and POSCO,'' dated August 24, 2016 (Korea Ministerial Error Decision Memorandum). --------------------------------------------------------------------------- On September 12, 2016, the ITC notified the Department of its final determinations that an industry in the United States is materially injured by reason of subsidized imports of subject merchandise from Brazil and Korea, within the meaning of section 705(b)(1)(A)(i) of the Act, and is threatened with material injury by reason of subsidized imports of subject merchandise from India, within the meaning of section 705(b)(1)(A)(ii) of the Act.\5\ --------------------------------------------------------------------------- \5\ See Letter to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, from Irving A. Williamson, Chairman, U.S. International Trade Commission, regarding certain cold-rolled steel flat products from Brazil, India, Korea, Russia, and the United Kingdom (September 12, 2016) (ITC Letter); see also Cold-Rolled Steel Flat Products from Brazil, India, Korea, Russia, and the United Kingdom, USITC Investigation Nos. 701-TA-540, 542-544 and 731-TA-1283, 1285, 1287, and 1289-1290 (Final), USITC Publication 4637 (September 2016). The Department also issued an affirmative final CVD determination with regard to cold-rolled steel flat products from the Russian Federation, see Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from the Russian Federation: Final Affirmative Countervailing Duty Determination and Final Negative Critical Circumstances Determination, 81 FR 49935 (July 29, 2016), and accompanying Issues and Decision Memorandum. However, the ITC notified the Department that imports of cold-rolled steel from Russia that are subsidized by the Government of Russia are negligible. --------------------------------------------------------------------------- Scope of the Orders The products covered by these orders are certain cold-rolled steel flat products. For a complete description of the scope of the orders, see Appendix I. Amendment to the Korea CVD Final Determination As discussed above, after analyzing the comments received from Hyundai Steel and POSCO, we determined, in accordance with section 705(e) of the Act and 19 CFR 351.224(f), that we made ministerial errors with regard to certain calculations in the Korea CVD Final Determination with respect to Hyundai Steel and POSCO. This amended final CVD determination corrects these errors and revises the ad valorem subsidy rate for Hyundai Steel to 3.89 percent (from 3.91 percent), for POSCO to 59.72 percent (from 58.36 percent), and for the All Others rate to 3.89 percent (from 3.91 percent).\6\ --------------------------------------------------------------------------- \6\ See Korea Ministerial Error Decision Memorandum. See also Department Memorandum regarding ``Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Amended Final Determination Calculation Memorandum for POSCO,'' dated August 24, 2016. The All Others rate has changed because it was determined by the rate calculated for Hyundai Steel, which has now been corrected. POSCO's final subsidy rate was excluded from the All Others rate because it was determined entirely under section 776 of the Act. See section 705(c)(5)(A)(i) of the Act. --------------------------------------------------------------------------- Countervailing Duty Orders In accordance with sections 705(b)(1)(A)(i), 705(b)(1)(A)(ii), and 705(d) of the Act, the ITC has notified the Department of its final determinations that the industry in the United States producing cold- rolled steel is materially injured by reason of subsidized imports of cold-rolled steel from Brazil and Korea, and is threatened with material injury by reason of subsidized imports of cold-rolled steel from India.\7\ Therefore, in accordance with section 705(c)(2) of the Act, we are publishing these CVD orders. --------------------------------------------------------------------------- \7\ See ITC Letter. --------------------------------------------------------------------------- Brazil As a result of the ITC's final determinations, in accordance with section 706(a) of the Act, the Department will direct U.S. Customs and Border Protection (CBP) to assess, upon further instruction by the Department, countervailing duties on unliquidated entries of cold- rolled steel from Brazil entered, or withdrawn from warehouse, for consumption on or after December 22, 2015, the date on which the Department published its preliminary affirmative countervailing duty determinations in the Federal Register,\8\ and before April 20, 2016, the date on which the Department instructed CBP to discontinue the suspension of liquidation in accordance with section 703(d) of the Act. Section 703(d) of the Act states that the suspension of liquidation pursuant to a preliminary determination may not remain in effect for more than four months. Therefore, entries of cold-rolled steel from Brazil made on or after April 20, 2016, and prior to the date of publication of the ITC's final determination in the Federal Register, are not liable for assessment of countervailing duties due to the Department's discontinuation, effective April 20, 2016, of the suspension of liquidation. --------------------------------------------------------------------------- \8\ See Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from Brazil: Preliminary Affirmative Determination and Alignment of Final Determination With Final Antidumping Duty Determination, 80 FR 79569 (December 22, 2015) (Brazil CVD Preliminary Determination). --------------------------------------------------------------------------- India According to section 706(b)(2) of the Act, countervailing duties shall be assessed on subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of the ITC's notice of final determination if that determination is based upon the threat of material injury, other than threat of material injury as described in section 706(b)(1) of the Act. Section 706(b)(1) of the Act states, ``{i{time} f the Commission, in its final determination under section 705(b), finds material injury or threat of material injury which, but for the suspension of liquidation under section 703(d)(2), would have led to a finding of material injury, then entries of the merchandise subject to the countervailing duty order, the liquidation of which has been suspended under section 703(d)(2), shall be subject to the imposition of countervailing duties under section 701(a).'' In addition, section 706(b)(2) of the Act requires CBP to refund any cash deposits of estimated countervailing duties posted before the date of publication of the ITC's final affirmative determination, if the ITC's final determination is based on threat other than the threat described in section 706(b)(1) of the Act. Because the ITC's final determination with regard to imports of cold-rolled steel from India is based on the threat of material injury and is not accompanied by a finding that injury would have resulted but for the imposition of suspension of liquidation of entries since the publication of the Department's India CVD Preliminary Determination in the Federal Register,\9\ section 706(b)(2) of the Act applies. --------------------------------------------------------------------------- \9\ See Countervailing Duty Investigation of Certain Cold-Rolled Steel Flat Products from India: Preliminary Affirmative Determination and Alignment of Final Determination With Final Antidumping Duty Determination, 80 FR 79562 (December 22, 2015) (India CVD Preliminary Determination). --------------------------------------------------------------------------- Korea Because the Department's preliminary determination in the Korea CVD investigation was negative, we did not instruct CBP to discontinue the suspension of liquidation with regard to entries of cold-rolled steel from Korea.\10\ [[Page 64438]] Therefore, with regard to Korea, we will direct CBP to assess, upon further instruction by the Department, countervailing duties on unliquidated entries of cold-rolled steel entered, or withdrawn from warehouse, for consumption on or after July 29, 2016, the date on which the Department published the Korea CVD Final Determination in the Federal Register. --------------------------------------------------------------------------- \10\ See Countervailing Duty Investigation of Certain Cold- Rolled Steel Flat Products from the Republic of Korea: Preliminary Negative Determination and Alignment of Final Determination With Final Antidumping Duty Determination, 80 FR 79567 (December 22, 2015) (Korea CVD Preliminary Determination). --------------------------------------------------------------------------- Suspension of Liquidation In accordance with section 706 of the Act, we will direct CBP to reinstitute the suspension of liquidation of cold-rolled steel from Brazil and India effective on the date of publication of the ITC's notice of final determinations in the Federal Register, and to continue the suspension of liquidation of cold-rolled steel from Korea, effective on the date of publication of the Department's notice of final determination in the Federal Register. We will also direct CBP to assess, upon further instruction by the Department, pursuant to section 706(a)(1) of the Act, countervailing duties for each entry of the subject merchandise in an amount based on the net countervailable subsidy rates for the subject merchandise. On or after the date of publication of the ITC's final injury determinations in the Federal Register, CBP must require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the rates noted below: ------------------------------------------------------------------------ Subsidy rate Exporter/Producer from Brazil (percent) ------------------------------------------------------------------------ Companhia Siderurgica Nacional (CSN)................. 11.31 Usinas Siderurgicas de Minas Gerais S.A. (Usiminas).. 11.09 All Others........................................... 11.20 ------------------------------------------------------------------------ ------------------------------------------------------------------------ Subsidy rate Exporter/Producer from India (percent) ------------------------------------------------------------------------ JSW Steel Limited and JSW Steel Coated Products 10.00 Limited............................................. All Others........................................... 10.00 ------------------------------------------------------------------------ ------------------------------------------------------------------------ Subsidy rate Exporter/Producer from Korea (percent) ------------------------------------------------------------------------ POSCO................................................ 59.72 Hyundai Steel Co., Ltd............................... 3.89 All Others........................................... 3.89 ------------------------------------------------------------------------ Termination of the Suspension of Liquidation The Department will instruct CBP to terminate the suspension of liquidation for entries of cold-rolled steel from India, entered or withdrawn from warehouse, for consumption prior to the publication of the ITC's notice of final determination. The Department will also instruct CBP to refund any cash deposits made with respect to entries of cold-rolled steel entered, or withdrawn from warehouse, for consumption on or after December 22, 2015 (i.e., the date of publication of the India CVD Preliminary Determination), but before April 20, 2016, (i.e., the date suspension of liquidation was discontinued in accordance with section 703(d) of the Act). Notifications to Interested Parties This notice constitutes the CVD orders with respect to cold-rolled steel from Brazil, India, and Korea, pursuant to section 706(a) of the Act. Interested parties may contact the Department's Central Records Unit, Room B8024 of the main Commerce building, for copies of an updated listed of CVD orders currently in effect. These orders are issued and published in accordance with section 706(a) of the Act and 19 CFR 351.211(b). Dated: September 14, 2016. Paul Piquado, Assistant Secretary for Enforcement and Compliance. Appendix I The products covered by these orders are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (``width'') of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non- rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ``worked after rolling'' (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross- section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of these orders are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:2.50 percent of manganese, or 3.30 percent of silicon, or 1.50 percent of copper, or 1.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 2.00 percent of nickel, or 0.30 percent of tungsten (also called wolfram), or 0.80 percent of molybdenum, or 0.10 percent of niobium (also called columbium), or 0.30 percent of vanadium, or 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial- free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/ or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro-alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold-rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this order unless specifically [[Page 64439]] excluded. The following products are outside of and/or specifically excluded from the scope of these orders: Ball bearing steels;\11\ --------------------------------------------------------------------------- \11\ Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) Not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. --------------------------------------------------------------------------- Tool steels;\12\ --------------------------------------------------------------------------- \12\ Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) More than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. --------------------------------------------------------------------------- Silico-manganese steel;\13\ --------------------------------------------------------------------------- \13\ Silico-manganese steel is defined as steels containing by weight: (i) Not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. --------------------------------------------------------------------------- Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain- Oriented Electrical Steel from Germany, Japan, and Poland.\14\ --------------------------------------------------------------------------- \14\ See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014). This determination defines grain-oriented electrical steel as ``a flat- rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.'' --------------------------------------------------------------------------- Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel from the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.\15\ --------------------------------------------------------------------------- \15\ See Non-Oriented Electrical Steel from the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741-42 (December 3, 2014). The orders define NOES as ``cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term `substantially equal' means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.'' --------------------------------------------------------------------------- The products subject to these orders are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the orders may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the orders is dispositive. [FR Doc. 2016-22614 Filed 9-19-16; 8:45 am] BILLING CODE 3510-DS-P
![64436 Federal Register / Vol. 81, No. 182 / Tuesday, September 20, 2016 / Notices
tourism industry. The purpose of the make statements is greater than can be (Brazil); Robert Bolling at (202) 482–
meeting is for Board members to review reasonably accommodated during the 3434 (India); and Emily Maloof at (202)
and discuss proposed recommendations meeting, the International Trade 482–5649 (Korea); AD/CVD Operations,
related to travel security and the Administration may conduct a lottery to Enforcement and Compliance,
customer experience, visa facilitation, determine the speakers. Speakers are International Trade Administration,
and the collection of international requested to submit a written copy of U.S. Department of Commerce, 14th
visitation data to the United States. The their prepared remarks by 5:00 p.m. Street and Constitution Avenue NW.,
final agenda will be posted on the EDT on Tuesday, September 27, 2016, Washington, DC 20230.
Department of Commerce Web site for for inclusion in the meeting records and SUPPLEMENTARY INFORMATION:
the Board at http://trade.gov/ttab, at for circulation to the members of the
least one week in advance of the Travel and Tourism Advisory Board. Background
meeting. In addition, any member of the public In accordance with sections 705(a)
may submit pertinent written comments and 777(i)(1) of the Tariff Act of 1930,
DATES: Tuesday, October 4, 2016, 3
concerning the Board’s affairs at any as amended (the Act), on July 20, 2016,
p.m.–5 p.m. EDT. The deadline for
time before or after the meeting. the Department made final
members of the public to register,
Comments may be submitted to Li Zhou determinations that countervailable
including requests to make comments
at the contact information indicated subsidies are being provided to
during the meeting and for auxiliary
above. To be considered during the producers and exporters of cold-rolled
aids, or to submit written comments for
meeting, comments must be received no steel from Brazil, India, and Korea.
dissemination prior to the meeting, is 5
later than 5:00 p.m. EDT on Tuesday, Pursuant to section 705(d) of the Act,
p.m. EDT on September 27, 2016.
September 27, to ensure transmission to the Department published the
ADDRESSES: The meeting will be held by the Board prior to the meeting. affirmative final determinations on July
conference call. The call-in number and Comments received after that date and 29, 2016.1
passcode will be provided by email to time will be distributed to the members On July 27, 2016, Usinas Siderurgicas
registrants. Requests to register but may not be considered on the call. de Minas Gerais S.A. (Usiminas) timely
(including to speak or for auxiliary aids) Copies of Board meeting minutes will be filed ministerial error comments,
and any written comments should be available within 90 days of the meeting. alleging that the Department made
submitted to: U.S. Travel and Tourism errors in the final determination of the
Advisory Board, U.S. Department of Dated: September 14, 2016.
Li Zhou,
CVD investigation of cold-rolled steel
Commerce, Room 4043, 1401 from Brazil. No other interested party
Constitution Avenue NW., Washington, Executive Secretary, United States Travel and
Tourism Advisory Board.
submitted ministerial error allegations
DC 20230, OACIO@trade.gov. Members or rebuttals to Usiminas’ submission.
of the public are encouraged to submit [FR Doc. 2016–22608 Filed 9–19–16; 8:45 am]
We analyzed the allegations submitted
registration requests and written BILLING CODE 3510–DR–P
by Usiminas and determined that only
comments via email to ensure timely one of the three alleged errors is a
receipt. ministerial error, as defined by section
DEPARTMENT OF COMMERCE
FOR FURTHER INFORMATION CONTACT: Li 705(e) of the Act, and 19 CFR
Zhou, the United States Travel and International Trade Administration 351.224(f).2 However, we determined
Tourism Advisory Board, Room 4043, that correcting the ministerial error
1401 Constitution Avenue NW., [C–351–844, C–533–866, C–580–882] within the calculations does not change
Washington, DC 20230, telephone: 202– the overall rate for Usiminas.3
Certain Cold-Rolled Steel Flat Products On July 27, 2016, Hyundai Steel and
482–4501, email: OACIO@trade.gov. from Brazil, India, and the Republic of
SUPPLEMENTARY INFORMATION: POSCO timely filed ministerial error
Korea: Amended Final Affirmative comments, alleging that the Department
Background: The Board advises the Countervailing Duty Determination and
Secretary of Commerce on matters made errors in the final determination
Countervailing Duty Order (the of the CVD investigation of cold-rolled
relating to the U.S. travel and tourism Republic of Korea) and Countervailing
industry. steel from Korea. No other interested
Duty Orders (Brazil and India) party submitted ministerial error
Public Participation: The meeting will
be open to the public and will be AGENCY: Enforcement and Compliance, allegations or rebuttals to Hyundai
accessible to people with disabilities. International Trade Administration, Steel’s and POSCO’s submissions. We
All guests are required to register in Department of Commerce analyzed the allegations submitted by
advance by the deadline identified SUMMARY: Based on affirmative final
under the DATES caption. Requests for determinations by the Department of 1 See Countervailing Duty Investigation of Certain
Commerce (the Department) and the Cold-Rolled Steel Flat Products from Brazil: Final
auxiliary aids must be submitted by the Affirmative Determination, 81 FR 49940 (July 29,
registration deadline. Last minute International Trade Commission (ITC), 2016) (Brazil CVD Final Determination);
requests will be accepted, but may be the Department is issuing countervailing Countervailing Duty Investigation of Certain Cold-
impossible to fill. There will be fifteen duty (CVD) orders on certain cold-rolled Rolled Steel Flat Products from India: Final
steel flat products (cold-rolled steel) Affirmative Determination, 81 FR 49932 (July 29,
(15) minutes allotted for oral comments 2016) (India CVD Final Determination); and
from members of the public joining the from Brazil, India, and the Republic of Countervailing Duty Investigation of Certain Cold-
meeting. To accommodate as many Korea (Korea). In addition, the Rolled Steel Flat Products from the Republic of
speakers as possible, the time for public Department is amending its final Korea: Final Affirmative Determination, 81 FR
sradovich on DSK3GMQ082PROD with NOTICES
affirmative determination with respect 49943 (July 29, 2016) (Korea CVD Final
comments may be limited to three (3) Determination).
minutes per person. Individuals wishing to Korea to correct the rates assigned to 2 See Department Memorandum regarding
to reserve speaking time during the Hyundai Steel Co., Ltd. (Hyundai Steel), ‘‘Countervailing Duty Investigation of Certain Cold-
meeting must submit a request at the POSCO, and All Others. Rolled Steel Flat Products from Brazil: Ministerial
Error Allegation for the Final Determination,’’ dated
time of registration, as well as the name DATES: Effective September 20, 2016.
August 24, 2016 (Brazil Ministerial Error Decision
and address of the proposed speaker. If FOR FURTHER INFORMATION CONTACT: Memorandum).
the number of registrants requesting to Sergio Balbontin at (202) 482–6478 3 Id.
VerDate Sep<11>2014 17:13 Sep 19, 2016 Jkt 238001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\20SEN1.SGM 20SEN1](https://thefederalregister.org/doc/81_FR_64618/page/1.svg)
![Federal Register / Vol. 81, No. 182 / Tuesday, September 20, 2016 / Notices 64439
excluded. The following products are outside The products subject to these orders are Council address: New England
of and/or specifically excluded from the currently classified in the Harmonized Tariff Fishery Management Council, 50 Water
scope of these orders: Schedule of the United States (HTSUS) under Street, Mill 2, Newburyport, MA 01950.
• Ball bearing steels;11 item numbers: 7209.15.0000, 7209.16.0030,
• Tool steels;12 7209.16.0060, 7209.16.0070, 7209.16.0091, FOR FURTHER INFORMATION CONTACT:
• Silico-manganese steel;13 7209.17.0030, 7209.17.0060, 7209.17.0070, Thomas A. Nies, Executive Director,
• Grain-oriented electrical steels (GOES) as 7209.17.0091, 7209.18.1530, 7209.18.1560, New England Fishery Management
defined in the final determination of the U.S. 7209.18.2510, 7209.18.2520, 7209.18.2580, Council; telephone: (978) 465–0492.
Department of Commerce in Grain-Oriented 7209.18.6020, 7209.18.6090, 7209.25.0000,
SUPPLEMENTARY INFORMATION:
Electrical Steel from Germany, Japan, and 7209.26.0000, 7209.27.0000, 7209.28.0000,
Poland.14 7209.90.0000, 7210.70.3000, 7211.23.1500, Agenda
• Non-Oriented Electrical Steels (NOES), 7211.23.2000, 7211.23.3000, 7211.23.4500,
as defined in the antidumping orders issued 7211.23.6030, 7211.23.6060, 7211.23.6090, The Advisory Panel will review and
by the U.S. Department of Commerce in Non- 7211.29.2030, 7211.29.2090, 7211.29.4500, discuss the draft scoping document for
Oriented Electrical Steel from the People’s 7211.29.6030, 7211.29.6080, 7211.90.0000, the upcoming limited access
Republic of China, Germany, Japan, the 7212.40.1000, 7212.40.5000, 7225.50.6000, amendment to the Northeast Skate
Republic of Korea, Sweden, and Taiwan.15 7225.50.8080, 7225.99.0090, 7226.92.5000, Complex Fishery Management Plan.
7226.92.7050, and 7226.92.8050. They will also develop
11 Ball bearing steels are defined as steels which The products subject to the orders may also
contain, in addition to iron, each of the following enter under the following HTSUS numbers:
recommendations to the Skate
elements by weight in the amount specified: (i) Not 7210.90.9000, 7212.50.0000, 7215.10.0010, Committee for 2017 Council priorities as
less than 0.95 nor more than 1.13 percent of carbon; 7215.10.0080, 7215.50.0016, 7215.50.0018, well as discuss other business, as
(ii) not less than 0.22 nor more than 0.48 percent 7215.50.0020, 7215.50.0061, 7215.50.0063, necessary.
of manganese; (iii) none, or not more than 0.03
7215.50.0065, 7215.50.0090, 7215.90.5000,
percent of sulfur; (iv) none, or not more than 0.03
7217.10.1000, 7217.10.2000, 7217.10.3000, Special Accommodations
percent of phosphorus; (v) not less than 0.18 nor
more than 0.37 percent of silicon; (vi) not less than 7217.10.7000, 7217.90.1000, 7217.90.5030, This meeting is physically accessible
1.25 nor more than 1.65 percent of chromium; (vii) 7217.90.5060, 7217.90.5090, 7225.19.0000, to people with disabilities. Requests for
none, or not more than 0.28 percent of nickel; (viii) 7226.19.1000, 7226.19.9000, 7226.99.0180, sign language interpretation or other
none, or not more than 0.38 percent of copper; and 7228.50.5015, 7228.50.5040, 7228.50.5070,
(ix) none, or not more than 0.09 percent of 7228.60.8000, and 7229.90.1000.
auxiliary aids should be directed to
molybdenum. The HTSUS subheadings above are Thomas A. Nies, Executive Director, at
12 Tool steels are defined as steels which contain
provided for convenience and U.S. Customs (978) 465–0492, at least 5 days prior to
the following combinations of elements in the the meeting date.
quantity by weight respectively indicated: (i) More
purposes only. The written description of the
than 1.2 percent carbon and more than 10.5 percent scope of the orders is dispositive. Authority: 16 U.S.C. 1801 et seq.
chromium; or (ii) not less than 0.3 percent carbon [FR Doc. 2016–22614 Filed 9–19–16; 8:45 am]
and 1.25 percent or more but less than 10.5 percent Dated: September 15, 2016.
BILLING CODE 3510–DS–P
chromium; or (iii) not less than 0.85 percent carbon Tracey L. Thompson,
and 1 percent to 1.8 percent, inclusive, manganese;
Acting Deputy Director, Office of Sustainable
or (iv) 0.9 percent to 1.2 percent, inclusive,
Fisheries, National Marine Fisheries Service.
chromium and 0.9 percent to 1.4 percent, inclusive, DEPARTMENT OF COMMERCE
molybdenum; or (v) not less than 0.5 percent carbon [FR Doc. 2016–22630 Filed 9–19–16; 8:45 am]
and not less than 3.5 percent molybdenum; or (vi) National Oceanic and Atmospheric BILLING CODE 3510–22–P
not less than 0.5 percent carbon and not less than
5.5 percent tungsten. Administration
13 Silico-manganese steel is defined as steels
RIN 0648–XE892 DEPARTMENT OF COMMERCE
containing by weight: (i) Not more than 0.7 percent
of carbon; (ii) 0.5 percent or more but not more than
1.9 percent of manganese, and (iii) 0.6 percent or New England Fishery Management National Oceanic and Atmospheric
more but not more than 2.3 percent of silicon. Council; Public Meeting Administration
14 See Grain-Oriented Electrical Steel from
Germany, Japan, and Poland: Final Determinations AGENCY: National Marine Fisheries RIN 0648–XE893
of Sales at Less Than Fair Value and Certain Final Service (NMFS), National Oceanic and
Affirmative Determination of Critical Atmospheric Administration (NOAA),
Circumstances, 79 FR 42501, 42503 (July 22, 2014).
New England Fishery Management
This determination defines grain-oriented electrical
Commerce. Council; Public Meeting
steel as ‘‘a flat-rolled alloy steel product containing ACTION: Notice; public meeting.
by weight at least 0.6 percent but not more than 6 AGENCY: National Marine Fisheries
percent of silicon, not more than 0.08 percent of SUMMARY: The New England Fishery Service (NMFS), National Oceanic and
carbon, not more than 1.0 percent of aluminum, and Management Council (Council) is Atmospheric Administration (NOAA),
no other element in an amount that would give the scheduling a public meeting of its Skate
steel the characteristics of another alloy steel, in
Commerce.
coils or in straight lengths.’’ Advisory Panel to consider actions ACTION: Notice; public meeting.
15 See Non-Oriented Electrical Steel from the affecting New England fisheries in the
People’s Republic of China, Germany, Japan, the exclusive economic zone (EEZ). SUMMARY: The New England Fishery
Republic of Korea, Sweden, and Taiwan: Recommendations from this group will Management Council (Council) is
Antidumping Duty Orders, 79 FR 71741, 71741–42
(December 3, 2014). The orders define NOES as
be brought to the full Council for formal scheduling a joint public meeting of its
‘‘cold-rolled, flat-rolled, alloy steel products, consideration and action, if appropriate. Monkfish Advisory Panel to consider
whether or not in coils, regardless of width, having DATES: This meeting will be held on actions affecting New England fisheries
an actual thickness of 0.20 mm or more, in which Tuesday, October 11, 2016 at 9:30 a.m. in the exclusive economic zone (EEZ).
the core loss is substantially equal in any direction
of magnetization in the plane of the material. The ADDRESSES: The meeting will be held at Recommendations from this group will
sradovich on DSK3GMQ082PROD with NOTICES
term ‘substantially equal’ means that the cross grain the Hilton Garden Hotel, One Thurber be brought to the full Council for formal
direction of core loss is no more than 1.5 times the Street, Warwick, RI 02886; telephone: consideration and action, if appropriate.
straight grain direction (i.e., the rolling direction) of
(401) 734–9600. DATES: This meeting will be held on
core loss. NOES has a magnetic permeability that
does not exceed 1.65 Tesla when tested at a field Wednesday, October 12, 2016 at 9:30
of 800 A/m (equivalent to 10 Oersteds) along (i.e., silicon, not more than 0.08 percent of carbon, and a.m.
parallel to) the rolling direction of the sheet (i.e., not more than 1.5 percent of aluminum. NOES has
B800 value). NOES contains by weight more than a surface oxide coating, to which an insulation ADDRESSES: The meeting will be held at
1.00 percent of silicon but less than 3.5 percent of coating may be applied.’’ the Hilton Garden Inn, One Thurber
VerDate Sep<11>2014 17:13 Sep 19, 2016 Jkt 238001 PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 E:\FR\FM\20SEN1.SGM 20SEN1](https://thefederalregister.org/doc/81_FR_64618/page/4.svg)
Document Created: 2018-02-09 13:20:27
Document Modified: 2018-02-09 13:20:27
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Dates | Effective September 20, 2016. | |
| Contact | Sergio Balbontin at (202) 482-6478 (Brazil); Robert Bolling at (202) 482-3434 (India); and Emily Maloof at (202) 482-5649 (Korea); AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230. | |
| FR Citation | 81 FR 64436 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR