| Page Range | 13992-13997 | |
| FR Document | 2017-05287 |
[Federal Register Volume 82, Number 50 (Thursday, March 16, 2017)] [Notices] [Pages 13992-13997] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-05287] ======================================================================= ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0698; FRL-9959-46] Certain New Chemicals; Receipt and Status Information for January 2017 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from January 3, 2017 to January 31, 2017. DATES: Comments identified by the specific case number provided in this document, must be received on or before April 17, 2017. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0698, and the specific PMN number or TME [[Page 13993]] number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 202-564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from January 3, 2017 to January 31, 2017, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory, please go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 57 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From January 3, 2017 to January 31, 2017 ---------------------------------------------------------------------------------------------------------------- Projected Case No. Received notice end Manufacturer Use Chemical date date importer ---------------------------------------------------------------------------------------------------------------- P-16-0284.............. 1/11/2017 4/11/2017 Deepak Nitrite (S) Optical (G) Anilino Corporation, Inc. brightener for substituted bis- textiles, paper triazinyl and paperboard. derivative of 4,4'- diaminostilbene- 2,2'disulfonic acid. P-16-0309.............. 1/13/2017 4/13/2017 CBI................ (G) PMN substances (G) 12- are intended for Hydroxystearic use as rheological acid, reaction or thixotropic products with agents used in the alkylene diamine production of and alkanoic acid. solvent based industrial coatings, high solid aromatic paints, adhesives, sealants, and other types of paints and topcoats. [[Page 13994]] P-16-0310.............. 1/13/2017 4/13/2017 CBI................ (G) PMN substances (G) 12- are intended for Hydroxystearic use as rheological acid, reaction or thixotropic products with agents used in the alkylene diamine production of and alkanoic acid. solvent based industrial coatings, high solid aromatic paints, adhesives, sealants, and other types of paints and topcoats. P-16-0315.............. 1/11/2017 4/11/2017 CBI................ (S) Industrial (G) Alkyldiene, rubber formulation. polymer, hydroxy terminated alkoxysilylalkylca rbamate. P-16-0358.............. 1/19/2017 4/19/2017 CBI................ (S) Intermediate (G) Alkyl phenol. for further polymer reaction. P-16-0493.............. 1/19/2017 4/19/2017 CBI................ (G) Paint.......... (G) Dicarboxylic acids, polymers with alkyl prop-2- enoate, alkyl 2- methylprop-2- enoate, alkyl [(alkenyl)alkyl]al kanediol, alkanediol, alkanedioic acid, alkyl 2-methylprop- 2-enoate, alkyl prop-2-enoic acid, alkylene [isocyanatocarbomo nocyle] and alkanediol, alkanolamine- blocked, compds with 2- (alkylamino)alkano l. P-16-0592.............. 1/23/2017 4/23/2017 Santolubes (S) This low (S) Fatty acids, c8- Manufacturing, LLC. viscosity diester c10, diesters with will be blended alpha-hydro-omega- with a hgiher hydroxypoly(oxy- viscosity ester to 1,4-butanediyl). make a high efficiency gear lubricant primarily for worm gear applications. P-17-0007.............. 1/24/2017 4/24/2017 CBI................ (S) Intermediate... (G) Dialkyl 7,10- dioxa, dithiahexadeca diene. P-17-0012.............. 1/17/2017 4/17/2017 CBI................ (S) Polymer mixed (S) 1,3- with styrene or benzenedicarboxyli other reactive c acid, polymer monomers. these with 1,2- resins are now furandione, 2- unsaturated methyl-1,3- thermoset propanediol and polyester resins 1,2 propanediol. that are used to make corrosion resistance and high temperature capable composites like chemical resistant tanks, pipe and ducting as well as heat shields and other composites exposed to elevated temperature environments. P-17-0163.............. 1/5/2017 4/5/2017 CBI................ (G) Chemical (G) Substituted Precursor. benzofuropyridine. P-17-0164.............. 1/5/2017 4/5/2017 CBI................ (G) Intermediate (G) Substituted chemical. benzofuropyridine. P-17-0168.............. 1/18/2017 4/18/2017 CBI................ (G) Surfactants.... (G) Fatty secondary amide ethanol. P-17-0168.............. 1/18/2017 4/18/2017 CBI................ (G) Intermediate... (G) Fatty secondary amide ethanol. P-17-0169.............. 1/18/2017 4/18/2017 CBI................ (G) Surfactants.... (G) Fatty tertiary amide ethanol. P-17-0169.............. 1/18/2017 4/18/2017 CBI................ (G) Intermediate... (G) Fatty tertiary amide ethanol. P-17-0172.............. 1/9/2017 4/9/2017 CBI................ (G) Lubricating oil (G) Sulfurized additive. alkylphenol, calcium salts. P-17-0183.............. 1/10/2017 4/10/2017 CBI................ (G) Pigment wetting (S) 1,3- and dispersing Propanediol, 2- additive. ethyl-2- (hydroxymethyl)-, polymer with 2- (chloromethyl)oxir ane, reaction products with polyethylene- polypropylene glycol 2- aminopropyl me ether. P-17-0184.............. 1/12/2017 4/12/2017 Colonial Chemical, (S) Firefighting (S) 1- Inc. foams. Propanaminium, 2- hydroxy-n, n- dimethyl-n-[3-[(1- oxooctyl- amino]propyl]-3- sulfo-, inner salt. P-17-0184.............. 1/12/2017 4/12/2017 Colonial Chemical, (S) Transportation (S) 1- Inc. washes. Propanaminium, 2- hydroxy-n, n- dimethyl-n-[3-[(1- oxooctyl- amino]propyl]-3- sulfo-, inner salt. P-17-0184.............. 1/12/2017 4/12/2017 Colonial Chemical, (S) Industrial all- (S) 1- Inc. purpose cleaners. Propanaminium, 2- hydroxy-n, n- dimethyl-n-[3-[(1- oxooctyl- amino]propyl]-3- sulfo-, inner salt. P-17-0184.............. 1/12/2017 4/12/2017 Colonial Chemical, (S) Personal care (S) 1- Inc. products, Propanaminium, 2- shampoos, facial hydroxy-n, n- washes. dimethyl-n-[3-[(1- oxooctyl- amino]propyl]-3- sulfo-, inner salt. P-17-0187.............. 1/11/2017 4/11/2017 CBI................ (S) (G) Polymer with Photosensitizing benzoic acid tetra latex, production halogen hydroxy %: 100.0 optional tetrahalogen oxo h pollution xanthenyl information: This alkenylaryl alkyl product provides ester alkalai for self- metal salt, butyl- sanitizing 2-propenoate, surfaces without ethenyl heavy metals or neodecanoate, mobile toxic methyl-2-methyl-2- chemicals. propenoate and 2- methyl-2-propenoic acid. P-17-0189.............. 1/26/2017 4/26/2017 Double Bond (S) Doublemer?278- (G) Chemical X25 is a ester Polyhalogenatedbic Industries USA, acrylate monomer ycloalkenedicarbox Inc. blended with 25% ylic acid, isobornyl methyl[oxyalkenyl) methacrylate, ]ethyl ester. which improves adhesion to substrates, such as pp and pe, pet. P-17-0192.............. 1/3/2017 4/3/2017 CBI................ (S) Polymer with (G) Polymer with aryl, akyl, aryl, akyl, diazole and polyol diazole and polyol acrylates used as acrylates. a dispersing additive for pigments in industrial paints and coatings. P-17-0194.............. 1/4/2017 4/4/2017 CBI................ (G) Pigment (G) Hydrogenated additive for dihalo dialkyl industrial diindolotriphenodi coatings. oxazine, dihydrodisubstitut ed isoindolyl alkyl derivs. [[Page 13995]] P-17-0195.............. 1/5/2017 4/5/2017 CBI................ (G) For (G) 1,3- manufacturing Propanediol,2- modified ethylene methylene-, vinyl alcohol substituted. copolymer. P-17-0196.............. 1/17/2017 4/17/2017 CBI................ (G) Can coating.... (G) Styrenated alkyl and epoxidized. P-17-0197.............. 1/6/2017 4/6/2017 CBI................ (G) Open dispersive (G) Formaldehyde, use component in polymer with liquid paint arylylpolyamine, 2- coating. (chloromethyl)oxir ane and phenol. P-17-0198.............. 1/19/2017 4/19/2017 CBI................ (G) Catalyst used (G) Neodymium in closed aluminium alkyl processes. polymer complexes. P-17-0199.............. 1/20/2017 4/20/2017 CBI................ (S) Binder in (G) Oxyalkylene sealant. urethane polyolefin. P-17-0200.............. 1/13/2017 4/13/2017 CBI................ (S) Monomer for use (G) 1,3- to manufacture of Bis(substitutedben a high performance zoyl)benzene. polymer. P-17-0203.............. 1/13/2017 4/13/2017 CBI................ (G) Crosslinking (G) Aromatic binder component. bis[(ether)(alkyl) phenol]. P-17-0204.............. 1/19/2017 4/19/2017 CBI................ (S) Monomer for (G) 1,4- high performance Bis(substitutedben polymer. zoyl)benzene. P-17-0205.............. 1/19/2017 4/19/2017 CBI................ (S) Monomer for (G) high performance Bis(fluorobenzoyl) polymer. benzene. P-17-0205.............. 1/19/2017 4/19/2017 CBI................ (G) ?n process (G) reagent. Bis(fluorobenzoyl) benzene. P-17-0207.............. 1/23/2017 4/23/2017 CBI................ (G) Paint.......... (G) 2-Alkenoic acid, 2 alkyl, 2 alkyl ester, polymer with alkyl alkenoate, carbomonocyle, alkyl alkenoate and alkyl alkenoate, alkyl peroxide initiated. P-17-0208.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. plastics and metal. hydroxy(hydroxymet hyl)-alkyl-, polymer with diisocyanatoalkane , dialkyl carbonate, aldanediol, .alpha.-hydro- .omega.- hydroxypoly(oxyalk anediyl), 1,1'- alkylenebis[isocya natocycloalkane] and a lactone. P-17-0208.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. leather and hydroxy(hydroxymet plastic. hyl)-alkyl-, polymer with diisocyanatoalkane , dialkyl carbonate, aldanediol, .alpha.-hydro- .omega.- hydroxypoly(oxyalk anediyl), 1,1'- alkylenebis[isocya natocycloalkane] and a lactone. P-17-0209.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. plastic and metal. x-hydroxy-y- (hydroxyalkyl)-y- alkyl-, polymer with dialkyl carbonate, alkanediol, alkylenebis [isocyanatocycloal kane] and lactone, compd. with trialkyl amine. P-17-0209.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. leather and x-hydroxy-y- plastic. (hydroxyalkyl)-y- alkyl-, polymer with dialkyl carbonate, alkanediol, alkylenebis [isocyanatocycloal kane] and lactone, compd. with trialkyl amine. P-17-0210.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. plastic and metal. x-hydroxy-y- (hydroxyalkyl)-x- alkyl-, polymer with dialkyl carbonate, alkanediol, isocyanato-1- (isocyanatoalkyl)- trialkylcycloalkan e, alkylenebis[isocya natocycloalkane] and lactone, polyethylene glycon mono me ether-blocked, compds. with trialkyl amine. P-17-0210.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. leather and x-hydroxy-y- plastic. (hydroxyalkyl)-x- alkyl-, polymer with dialkyl carbonate, alkanediol, isocyanato-1- (isocyanatoalkyl)- trialkylcycloalkan e, alkylenebis[isocya natocycloalkane] and lactone, polyethylene glycon mono me ether-blocked, compds. with trialkyl amine. P-17-0211.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. plastic and metal. x-hydroxy-y- (hydroxyalkyl)-y- alkyl-, polymer with dialkyl carbonate, alkanediol, alkylenebis[iscyan atocycloalkane] and lactone, compd. with trialkylamine. P-17-0211.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coating for (G) Alkanoic acid, Inc. leather and x-hydroxy-y- plastic. (hydroxyalkyl)-y- alkyl-, polymer with dialkyl carbonate, alkanediol, alkylenebis[iscyan atocycloalkane] and lactone, compd. with trialkylamine. P-17-0212.............. 1/16/2017 4/16/2017 Alberdingk Boley, (S) Coatings for (G) Aryl Inc. wood, plastic and dicarboxylic acid, metal. polymer with alkanedioic acid, alkane diol, hydroxy(hydoroxyal kyl) alkanoic acid, alkylenebis[isocya natoalkane] and [(alkyl alkylidene)bis(ary leneoxy)]bis[alkan ol]. [[Page 13996]] P-17-0213.............. 1/16/2017 4/16/2017 Alberdingk Boley (S) Coatings for (G) Inc. wood, plastic and Aryldicarboxylic metal. acid, polymer with cycloankandialkano l, alkyldiamine, alkanedioic acid, alkanediol, hydroxy (hydroxyalkyl) alkanoic acid, alkylenebis[isocya natoalkane] and [(alkylethylidene) bis(phenyleneoxy)] bis[alkanol]. P-17-0214.............. 1/16/2017 4/16/2017 Clariant (S) Pour point (G) 2-Propenoic Corporation. depressant for use acid, polymer with in petroleum alkene and alkenyl products. acetate, alkyl 2- alkyl isoalkyl esters. P-17-0215.............. 1/16/2017 4/16/2017 Clariant (S) Lubricant for (G) Copolymer of Corporation. use in metal alpha-olefin and working fluids. dibutyl maleate. P-17-0216.............. 1/27/2017 4/27/2017 CBI................ (G) Paint raw (G) Acryl-modified material. epoxy polymer with vegetable oil, fatty acid, acrylates and methacyrlates with organic amine. P-17-0217.............. 1/19/2017 4/19/2017 Ngk Ceramics USA, (S) Additive to (S) Coke, (coal), Inc. diesel particulate secondary pitch. filter manufacture. P-17-0218.............. 1/25/2017 4/25/2017 CBI................ (G) Processing aid (S) for membrane Bicyclo[2.2.1]hept production. ane-1- methanesulfonic acid, 7,7-dimethyl- 2-oxo-, compd. with n,n- diethylethanamine (1:1). P-17-0219.............. 1/27/2017 4/27/2017 CBI................ (G) Component of (G) Polyester of coil coating. aliphatic glycols and aromatic diacids. P-17-0220.............. 1/25/2017 4/25/2017 CBI................ (G) Additive, open, (G) 2-Oxepanone, non-dispersive use. reaction products with alkylenediamine- alkyleneimine polymer, 2-[[(2- alkyl)oxy]alkyl]ox irane and tetrahydro-2h- pyran-2-one. P-17-0221.............. 1/27/2017 4/27/2017 CBI................ (G) Open, non (G) dispersive. Alkylheterocyclic amine blocked isocyanate, alkoxysilane polymer. P-17-0222.............. 1/30/2017 4/30/2017 CBI................ (G) Additive, open, (G) 1,3,5-Triazine- non-dispersive use. 2,4-diamine, 6- phenyl-, reaction products with polyalkylene glycol mono-alkyl ether and 2,4-tdi. P-17-0223.............. 1/30/2017 4/30/2017 CBI................ (G) Additive, open, (G) Fatty acids, non-dispersive use. tall-oil, reaction products with 2- [(2- aminoalkyl)amino]a lkanol, compds. with alkylene oxide-glycidyl o- tolyl ether polymer dihydrogen phosphate alkyl ether. ---------------------------------------------------------------------------------------------------------------- For the 16 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 2--NOCs Received From January 3, 2017 to January 31, 2017 ---------------------------------------------------------------------------------------------------------------- Case No. Received date Commencement date Chemical ---------------------------------------------------------------------------------------------------------------- J-16-0036............... 1/12/2017.............. 12/15/2016................ (G) Modified organism. P-11-0176............... 1/3/2017............... 12/12/2016................ (S) Propanoic acid, 3-hydroxy-2- (hydroxymethyl_2-2methyl-, polymer with n1-(2-aminomethyl)- 1,2-ethanediamine, hydrazine, alpha-hydro-omega- hydroxypoly(oxy-1,4-butanediyl) and 1,1'-methylenebis[4- isocyanatocyclohexane], diethanolamine-blocked, compounds with 2- (dimethylamino)ethanol. P-13-0916............... 1/19/2017.............. 4/17/2016................. (G) Alkanedioic acid, polymer with alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0711............... 1/19/2017.............. 5/3/2016.................. (G) Carbonic acid, dimethyl ester, polymer with alkanediol and lactone, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0851............... 1/19/2017.............. 7/24/2016................. (G) Hexanedioic acid, polymer with substituted-alkanediol, alkanediol and alkanediol, bis[n- [4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0852............... 1/19/2017.............. 7/24/2016................. (G) Alkanedioic acid, polymer with alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0853............... 1/19/2017.............. 7/24/2016................. (G) 1,3-Benzenedicarboxylic acid, polymer with 1,4- benzenedicarboxylic acid, alkanediol and alkanedioic acid, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0854............... 1/19/2017.............. 7/24/2016................. (G) Hexanedioic acid, polymer with alkylene glycol and alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0855............... 1/19/2017.............. 4/17/2016................. (G) 1,3-Benzenedicarboxylic acid, polymer with 1,4- benzenedicarboxylic acid, substituted-alkanediol, alkanediol, alkanedioic acid and alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0856............... 1/19/2017.............. 4/17/2016................. (G) 1,3-Benzenedicarboxylic acid, polymer with 1,4- benzenedicarboxylic acid, substituted-alkanediol, alkanediol, alkanedioic acid and substituted-glycol diacrylate, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. [[Page 13997]] P-14-0857............... 1/19/2017.............. 4/17/2016................. (G) 1,3-Benzenedicarboxylic acid, polymer with 1,4- benzenedicarboxylic acid, substituted-alkanediol, alkanediol, and alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-14-0858............... 1/19/2017.............. 4/17/2016................. (G) Hexanedioic acid, polymer with substituted alkanediol and alkanediol, bis[n-[4-[(4- isocyanatophenyl)methyl]phenyl]c arbamate]. P-15-0558............... 1/13/2017.............. 1/6/2017.................. (S) 4-Morpholinepropanoic acid, .alpha.-methyl-,methyl ester. P-16-0172............... 1/6/2017............... 12/13/2016................ (G) 1,3-Propanediol, 2,2-dimethyl- , polymer with diisocyanatoalkane, dialkyl heteromonocycle-blocked. P-16-0252............... 1/6/2017............... 12/7/2016................. (G) Silane-terminated polyether. P-16-0323............... 1/3/2017............... 12/18/2016................ (G) Alkylaldehyde, reaction products with substituted carbomonocycle-substituted heteromonocycle-alkylene glycol bis[[[substituted(oxoneoalky)oxy ]alkyl]amino]alky] ether polymer and alkyl substituted alkanediamine, acetate salts. ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: March 6, 2017. Pamela Myrick, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2017-05287 Filed 3-15-17; 8:45 am] BILLING CODE 6560-50-P
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before April 17, 2017. | |
| Contact | For technical information contact: Jim Rahai, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: | |
| FR Citation | 82 FR 13992 |