Page Range | 21996-22000 | |
FR Document | 2017-09559 |
[Federal Register Volume 82, Number 90 (Thursday, May 11, 2017)] [Notices] [Pages 21996-22000] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-09559] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0699; FRL-9960-31] Certain New Chemicals; Receipt and Status Information for February 2017 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from February 1, 2017 to February 28, 2017. DATES: Comments identified by the specific case number provided in this document, must be received on or before June 12, 2017. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0699, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or [[Page 21997]] CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from February 1, 2017 to February 28, 2017, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory, please go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 62 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From February 1, 2017 to February 28, 2017 ---------------------------------------------------------------------------------------------------------------- Projected Case No. Received date notice end Manufacturer Use Chemical date importer ---------------------------------------------------------------------------------------------------------------- P-17-0227........... 2/1/2017 5/2/2017 CBI.............. (G) Additive (G) 2-alkenoic acid, open, non- 2-alkyl-, alkyl dispersive use. ester, polymer with 2-alkyl 2-propenoate and a-(2-alkyl-1-oxo- 2-alken-1-yl- [iquest]- alkoxypoly(oxy-1,2- alkanediyl), ester with a-2-alken-1-yl- [iquest]- hydroxypoly(oxy-1,2- alkanediyl). P-16-0186........... 2/6/2017 5/7/2017 CBI.............. (G) Surfactant.. (G) Sodium branched chain alkyl hydroxyl and branched chain alkenyl sulfonates. P-16-0338........... 2/15/2017 5/16/2017 CBI.............. (G) Dyestuff.... (G) Xanthylium, (sulfoaryl)--bis [(substituted aryl) amino]-, sulfo derivs., inner salts, metal salts. P-16-0339........... 2/15/2017 5/16/2017 CBI.............. (G) Dyestuff.... (G) Substituted triazinyl metal salt, diazotized, coupled with substituted pyridobenzimidazoles ulfonic acids, substituted pyridobenzimidazoles ulfonic acids, diazotized substituted alkanesulfonic acid, diazotized substituted aromatic sulfonate, diazotized substituted aromatic sulfonate, metal salts. P-16-0358........... 2/17/2017 5/18/2017 CBI.............. (S) Chemical (G) Alkyl phenol. intermediate. P-16-0439........... 2/14/2017 5/15/2017 CBI.............. (G) Coloring (G) Carbon black, agent. (organic acidic carbocyclic)- modified, inorganic salt. P-16-0440........... 2/14/2017 5/15/2017 CBI.............. (G) Coloring (G) Carbon black, agent. (organic acidic carbocyclic)- modified, metal salt. P-16-0513........... 2/3/2017 5/4/2017 CBI.............. (S) Intermediate (G) Hydroxy for further alkylbiphenyl. reaction. P-16-0514........... 2/28/2017 5/29/2017 CBI.............. (G) Catalyst.... (G) Mixed metal oxide. P-16-0543........... 2/23/2017 5/24/2017 CBI.............. (G) Battery (G) ingredient. Halogenophosphoric acid metal salt. P-16-0544........... 2/6/2017 5/7/2017 Guardian (S) Additive to (S) Flue dust, glass- Industries Corp. influence manufg. melting desulfurization, temperature of calcium hydroxide- raw materials treateddefinition: and physical the dust produced characteristics form the flue gas of the final exhaust cleaning of product during a glass the manufacture manufacturing of flat glass. process followed by treatment with hydrated lime. it consists primarily of caso4 and ca(co3). P-16-0570........... 2/10/2017 5/11/2017 CBI.............. (S) Aromatic (G) Aromatic polyester polyester polyol. polyol for rigid foam. P-16-0593........... 2/24/2017 5/25/2017 CBI.............. (S) Aromatic (G) Aromatic polyester polyester polyol. polyol for rigid foam. P-16-0595........... 2/23/2017 5/24/2017 CBI.............. (G) Polymer..... (G) Substituted- (hydroxyalkyl)-alkyl- alkanoic acid, hydroxy- (substitutedalkyl)- alkyl-, polymer with alpha-hydro-omega- hydroxypoly[oxy(alky l-ethanediyl)] and isocyanato- (isocyanatoalkyl)- multialkylcycloalkan e, salt, alkanol- blocked, compds. [[Page 21998]] P-16-0599........... 2/23/2017 5/24/2017 CBI.............. (G) Binder (G) Benzoic acid, 4- resinopen non- [(4- dispersive use. ethenylphenyl)alkoxy ]-2-hydroxy-, polymer with ethenylbenzene and octadecyl 2-methyl-2- propenoate. P-17-0014........... 2/10/2017 5/11/2017 Santolubes (G) Gear (S) Fatty acids, c8- Manufacturing lubricant. c10, mixed esters Llc. with c18-unsatd. fatty acid dimers and alpha-hydro- omega- hydroxypoly(oxy-1,4- butanediyl). P-17-0028........... 2/14/2017 5/15/2017 Henkel (G) Component in (S) Fatty acid, Corporation. a epoxy castor oil, reaction encapsulant. products with epichlorohydrin. P-17-0117........... 2/14/2017 5/15/2017 CBI.............. (G) Use as a (S) 1,6,10- polyol for dodecatriene, 7,11- polyurethane dimethyl-3-methylene- manufacture. , (6e)-, reaction of the homopolymer, 2- new substance hydroxypropyl- with a terminated. diisocyanate or Polyisocyanate And other polyols will produce a higher mw polymer. P-17-0117........... 2/14/2017 5/15/2017 CBI.............. (S) Used as a (S) 1,6,10- feedstock for dodecatriene, 7,11- hydrogenation dimethyl-3-methylene- to produce a , (6e)-, saturated diol homopolymer, 2- for use in hydroxypropyl- urethane terminated. chemistry or as an additive in coatings adhesives or sealants. P-17-0118........... 2/14/2017 5/15/2017 CBI.............. (S) Used as a (S) 1,6,10- feedstock for dodecatriene, 7,11- hydrogenation dimethyl-3-methylene- to produce a , (6e)-, saturated diol homopolymer, 2- for use in hydroxyethyl- urethane terminated. chemistry or as an additive in coatings, adhesives or sealants.. (G) Use as a polyol for polyurethane manufacture. reaction of the new substance with a diisocyanate or polyisocyanate and other polyols will produce a higher mw polymer. P-17-0149........... 2/6/2017 5/7/2017 CBI.............. (G) Electronic (G) Fluorocyanophenyl use. alkylbenzoate. (G) Electronic device use. P-17-0168........... 2/7/2017 5/8/2017 CBI.............. (G) Surfactants. (G) Fatty secondary (G) Intermediate amide ethanol. P-17-0169........... 2/7/2017 5/8/2017 CBI.............. (G) Surfactants. (G) Fatty tertiary (G) Intermediate amide ethanol. P-17-0172........... 2/14/2017 5/15/2017 CBI.............. (G) Lubricating (G) Sulfurized oil additive. alkylphenol, calcium salts. P-17-0176........... 2/6/2017 5/7/2017 CBI.............. (G) Battery (G) Carbonic acid, ingredient. alkyl carbomonocyclic ester. P-17-0177........... 2/25/2017 5/26/2017 Shin-Etsu Microsi (G) (G) Microlithograph Monoheteropentacyclo y for alkane-4-carboxylic electronic acid, substituted- device cycloalkyl ester. manufacturing. P-17-0178........... 2/25/2017 5/26/2017 Shin-Etsu Microsi (G) (G) Sulfonium, Microlithograph triphenyl-, salt y for with substituted- electronic alkyl 4-substituted- device benzoate. manufacturing. P-17-0188........... 2/14/2017 5/15/2017 CBI.............. (G) Binder resin (G) Alpha-omega, for adhesives/ silane-terminated, sealants. polyether polyol based polyurethane polymer. P-17-0189........... 2/8/2017 5/9/2017 Double Bond (S) (G) Chemical Doublemer[supre Polyhalogenatedbicyc Industries Usa, g]278-X25 is a loalkenedicarboxylic Inc. ester acrylate acid, monomer blended methyl[oxyalkenyl)]e with 25% thyl ester. isobornyl methacrylate, which improves adhesion to substrates, such as pp and pe, pet. P-17-0199........... 2/3/2017 5/4/2017 CBI.............. (S) Binder in (G) Oxyalkylene sealant. urethane polyolefin. P-17-0208........... 2/5/2017 5/6/2017 Alberdingk Boley (S) Coating for (G) Alkanoic acid, Inc. leather and hydroxy(hydroxymethy plastic. l)-alkyl-, polymer (S) Coating for with plastics and diisocyanatoalkane, metal. dialkyl carbonate, aldanediol, .alpha.- hydro-.omega.- hydroxypoly(oxyalkan ediyl), 1,1'- alkylenebis[isocyana tocycloalkane] and a lactone. P-17-0209........... 2/5/2017 5/6/2017 Alberdingk Boley (S) Coating for (G) Alkanoic acid, x- Inc. plastic and hydroxy-y- metal. (hydroxyalkyl)-y- (S) Coating for alkyl-, polymer with leather and dialkyl carbonate, plastic. alkanediol, alkylenebis [isocyanatocycloalka ne] and lactone, compd. with trialkyl amine. P-17-0210........... 2/5/2017 5/6/2017 Alberdingk Boley (S) Coating for (G) Alkanoic acid, x- Inc. plastics and hydroxy-y- metal. (hydroxyalkyl)-x- (S) Coating for alkyl-, polymer with leather and dialkyl carbonate, plastic. alkanediol, isocyanato-1- (isocyanatoalkyl)- trialkylcycloalkane, alkylenebis[isocyana tocycloalkane] and lactone, polyethylene glycon mono me ether- blocked, compds. with trialkyl amine. P-17-0211........... 2/5/2017 5/6/2017 Alberdingk Boley (S) Coating for (G) Alkanoic acid, x- Inc. leather and hydroxy-y- plastic. (hydroxyalkyl)-y- (S) Coating for alkyl-, polymer with plastics and dialkyl carbonate, metal. alkanediol, alkylenebis[iscyanat ocycloalkane] and lactone, compd. with trialkylamine. P-17-0216........... 2/28/2017 5/29/2017 CBI.............. (G) Paint raw (G) Acryl-modified material. epoxy polymer with vegitable oil, fatty acid, acrylates and methacyrlates with organic amine. [[Page 21999]] P-17-0217........... 2/14/2017 5/15/2017 Ngk Ceramics Usa, (S) Additive to (S) Coke, (coal), Inc. diesel secondary pitch. particulate filter manufacture. this material is added to the clay prior to forming into a substrate. when the substrate is fired in a kiln, the material burns out, leaving internal pores. these pores collect the emission soot during the operation of the dpf after being installed on the vehicle. P-17-0226........... 2/2/2017 5/3/2017 Nease Corporation (G) Bleach (S) Manganese(2+ ), catalyst. bis(octahydro-1,4,7- trimethyl-1h-1,4,7- triazonine- [iquest]n1,[iquest]n 4,.kappa.n7)tri-[mu]- oxodi- ,hexafluorophosphate (1-) (1:2). P-17-0228........... 2/2/2017 5/3/2017 CBI.............. (G) Coating for (G) 2'-fluoro-4''- displays. alkyl-4-propyl- 1,1':4',1''- terphenyl. P-17-0229........... 2/2/2017 5/3/2017 CBI.............. (G) Coating for (G) 4-ethyl-2'-fluoro- displays. 4''-alkyl- 1,1':4',1''- terphenyl. P-17-0230........... 2/3/2017 5/4/2017 CBI.............. (G) Additive, (G) Oxirane, 2-alkyl- open, non- , polymer with dispersive use. oxirane, mono[n-[3- (carboxyamino)-4(or 6)- alkylphenyl]carbamat e], alkyl ether, ester with 2,2',2''- nitrilotris- [alkanol]. P-17-0231........... 2/6/2017 5/7/2017 CBI.............. (G) Paint, stain (G) Fatty acids, or primer polymers with coating. benzoic acid, cyclohexanedicarboxy lic acid anhydride, aliphatic diisocyanate, alkyl diol, alkyl triol, pentaerythritol, phthalic anhydride, polyalkylene glycol amine, and aromatic dicarboxylate sulphonic acid sodium salt. P-17-0233........... 2/10/2017 5/11/2017 CBI.............. (S) Creping aid (G) Oxyalkylene for yankee modified polyalkyl dryers to amine alkyl diacid manufacture polymer with 2- tissue and (chloromethyl)oxiran towel paper. e. P-17-0234........... 2/12/2017 5/13/2017 CBI.............. (S) Adhesive (S) Oxirane, 2- intermediate. (chloromethyl)-, polymer with 2- methyloxirane polymer with oxirane bis(2-aminopropyl) ether. P-17-0235........... 2/10/2017 5/11/2017 CBI.............. (G) Anti- (G) Amidoamino agglomerate. quaternary ammonium salt. P-17-0236........... 2/23/2017 5/24/2017 CBI.............. (G) Matrix resin (G) Formaldehyde, for composite polymer with materials. (chloromethyl) (G) Binder resin oxirane and for electronic substituted aromatic materials. compounds. P-17-0237........... 2/23/2017 5/24/2017 CBI.............. (S) Loca (see (S) 1,6,10- description for dodecatriene, 7,11- the primary dimethyl-3-methylene- diol). due to , (6e)-, its lower homopolymer, reactivity, hydrogenated, 2- very little of hydroxyethyl- the terminated. hydrogenated secondary diol will be made or sold for this use. the uses would be identical to the use of the hydrogenated primary diol. (G) Export overseas for use in polyurethanes. (G) Use in uv cured systems. P-17-0238........... 2/23/2017 5/24/2017 CBI.............. (S) Loca (see (S) 1,6,10- description for dodecatriene, 7,11- the primary dimethyl-3-methylene- diol). due to , (6e)-, its lower homopolymer, 2- reactivity, hydroxypropyl- very little of terminated, the hydrogenated. hydrogenated secondary diol will be made or sold for this use. the uses would be identical to the use of the hydrogenated primary diol. (G) For use as a plasticizer in uv cure formulations. (G) Export overseas for use in polyurethanes. (G) Use in uv cured systems. P-17-0246........... 2/28/2017 5/29/2017 CBI.............. (G) Industrial (G) Polycarbonate intermediate. polyol. ---------------------------------------------------------------------------------------------------------------- For the 12 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. [[Page 22000]] Table 2--NOCs Received From February 1, 2017 to February 28, 2017 ---------------------------------------------------------------------------------------------------------------- Case No. Received date Commencement date Chemical ---------------------------------------------------------------------------------------------------------------- J-16-0023............................ 2/10/2017 1/13/2017 (G) Trichoderma reesei modified. P-13-0824............................ 2/2/2017 1/19/2017 (S) D-glucitol, 1,4:3,6-dianhydro-, polymer with 1,4- cyclohexanedimethanol and diphenyl carbonate. P-14-0166............................ 2/23/2017 12/6/2016 (G) Fatty acid amide. P-14-0185............................ 2/23/2017 12/9/2016 (G) Fatty acid amide acetate. P-14-0321............................ 2/1/2017 1/11/2017 (S) 2-chloro-1,1,1,2- tetrafluoropropane(244bb). P-15-0009............................ 2/2/2017 1/29/2017 (S) Cyclohexane, 2-ethoxy-1,3-dimethyl- . P-15-0751............................ 2/10/2017 2/10/2017 (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-16-0177............................ 2/2/2017 12/6/2016 (S) Barium molybdenum niobium tantalum tellurium vanadium zinc oxide. P-16-0284............................ 2/12/2017 1/24/2017 (G) ``anilino substituted bis- triazinyl derivative of 4, 4'- diaminostilbene-2, 2' disulfonic acid, mixed amine sodium salt''. P-16-0367............................ 2/2/2017 2/1/2017 (G) Substituted heteromonocycle, polymer with substituted alkane and ethoxylated alkane, substituted heteromonocycle substituted alkyl ester-blocked. P-16-0369............................ 2/2/2017 2/2/2017 (G) Substituted heteromonocycle, telomer with substituted carbomonocycles, substituted alkyl ester. P-17-0144............................ 2/21/2017 2/17/2017 (S) Amines, c36-alkylenedi-,polymers with octahydro-4,7-methano-1h- indenedimethanamine and pyromellitic dianhydride, maleated. ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: March 28, 2017. Pamela Myrick, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2017-09559 Filed 5-10-17; 8:45 am] BILLING CODE 6560-50-P
Category | Regulatory Information | |
Collection | Federal Register | |
sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
Publisher | Office of the Federal Register, National Archives and Records Administration | |
Section | Notices | |
Action | Notice. | |
Dates | Comments identified by the specific case number provided in this document, must be received on or before June 12, 2017. | |
Contact | For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
FR Citation | 82 FR 21996 |