82 FR 57577 - Certain Small Diameter Seamless Carbon and Alloy Standard, Line and Pressure Pipe From Germany: Final Results of the Expedited Fourth Sunset Review of the Antidumping Duty Order

DEPARTMENT OF COMMERCE
International Trade Administration

Federal Register Volume 82, Issue 233 (December 6, 2017)

Page Range		57577-57578
FR Document		2017-26208

As a result of this sunset review, the Department of Commerce (the Department) finds that revocation of the antidumping duty order on certain small diameter seamless carbon and alloy standard, line and pressure pipe (seamless pipe) from Germany would be likely to lead to continuation or recurrence of dumping at the levels indicated in the ``Final Results of Sunset Review'' section of this notice.

Federal Register, Volume 82 Issue 233 (Wednesday, December 6, 2017)

[Federal Register Volume 82, Number 233 (Wednesday, December 6, 2017)]
[Notices]
[Pages 57577-57578]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2017-26208]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-428-820]


Certain Small Diameter Seamless Carbon and Alloy Standard, Line 
and Pressure Pipe From Germany: Final Results of the Expedited Fourth 
Sunset Review of the Antidumping Duty Order

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: As a result of this sunset review, the Department of Commerce 
(the Department) finds that revocation of the antidumping duty order on 
certain small diameter seamless carbon and alloy standard, line and 
pressure pipe (seamless pipe) from Germany would be likely to lead to 
continuation or recurrence of dumping at the levels indicated in the 
``Final Results of Sunset Review'' section of this notice.

DATES: Applicable December 6, 2017.

FOR FURTHER INFORMATION: John McGowan, AD/CVD Operations, Office VI, 
Enforcement and Compliance, International Trade Administration, U.S. 
Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 
20230; telephone: (202) 482-3019.

SUPPLEMENTARY INFORMATION: 

Background

    On August 1, 2017, the Department published the notice of 
initiation of the fourth sunset review of the antidumping duty order on 
seamless pipe from Germany, pursuant to section 751(c)(2) of the Tariff 
Act of 1930, as amended (the Act).\1\ On August 16, 2017, the 
Department received a notice of intent to participate in this review 
from United States Steel Corporation (U.S. Steel) within the deadline 
specified in 19 CFR 351.218(d)(1)(i). U.S. Steel claimed interested 
party status under section 771(9)(C) of the Act, as a manufacturer of a 
domestic like product in the United States.
---------------------------------------------------------------------------

    \1\ See Initiation of Five-Year (Sunset) Reviews, 82 FR 35748 
(August 1, 2017).
---------------------------------------------------------------------------

    On August 31, 2017, we received a complete substantive response for 
this review from U.S. Steel within the 30-day deadline specified in 19 
CFR 351.218(d)(3)(i). We received no substantive responses from any 
other interested parties, nor was a hearing requested. As a result, 
pursuant to section 751(c)(3)(B) of the Act and 19 CFR 
351.218(e)(1)(ii)(C)(2), the Department conducted an expedited (120-
day) sunset review of the order.

Scope of the Order

    The scope of the order includes small diameter seamless carbon and 
alloy standard, line and pressure pipes (seamless pipes) produced to 
the ASTM A-335, ASTM A-106, ASTM A-53 and API 5L specifications and 
meeting the physical parameters described below, regardless of 
application. The scope of the order also includes all products used in 
standard, line, or pressure pipe applications and meeting the physical 
parameters below, regardless of specification.
    For purposes of the order, seamless pipes are seamless carbon and 
alloy (other than stainless) steel pipes, of circular cross-section, 
not more than 114.3 mm (4.5 inches) in outside diameter, regardless of 
wall thickness, manufacturing process (hot-finished or cold-drawn), end 
finish (plain end, beveled end, upset end, threaded, or threaded and 
coupled), or surface finish. These pipes are commonly known as standard 
pipe, line pipe or pressure pipe, depending upon the application. They 
may also be used in structural applications. Pipes produced in non-
standard wall thicknesses are commonly referred to as tubes.
    The seamless pipes subject to the order are currently classifiable 
under subheadings 7304.19.10.20, 7304.19.50.20, 7304.31.60.50, 
7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 
7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 
7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the 
Harmonized Tariff Schedule of the United States (HTSUS).
    The following information further defines the scope of the order, 
which covers pipes meeting the physical parameters described above:
    Specifications, Characteristics, and Uses: Seamless pressure pipes 
are intended for the conveyance of water, steam, petrochemicals, 
chemicals, oil products, natural gas and other liquids and gasses in 
industrial piping systems. They may carry these substances at elevated 
pressures and temperatures and may be subject to the application of 
external heat. Seamless carbon steel pressure pipe meeting the American 
Society for Testing and Materials (ASTM) standard A-106 may be used in 
temperatures of up to 1000 degrees Fahrenheit, at various American 
Society of Mechanical Engineers (ASME) code stress levels. Alloy pipes 
made to ASTM standard A-335 must be used if temperatures and stress 
levels exceed those allowed for A-106 and the ASME codes. Seamless 
pressure pipes sold in

[[Page 57578]]

the United States are commonly produced to the ASTM A-106 standard.
    Seamless standard pipes are most commonly produced to the ASTM A-53 
specification and generally are not intended for high temperature 
service. They are intended for the low temperature and pressure 
conveyance of water, steam, natural gas, air and other liquids and 
gasses in plumbing and heating systems, air conditioning units, 
automatic sprinkler systems, and other related uses. Standard pipes 
(depending on type and code) may carry liquids at elevated temperatures 
but must not exceed relevant ASME code requirements.
    Seamless line pipes are intended for the conveyance of oil and 
natural gas or other fluids in pipe lines. Seamless line pipes are 
produced to the API 5L specification.
    Seamless pipes are commonly produced and certified to meet ASTM A-
106, ASTM A-53 and API 5L specifications. Such triple certification of 
pipes is common because all pipes meeting the stringent A-106 
specification necessarily meet the API 5L and ASTM A-53 specifications. 
Pipes meeting the API 5L specification necessarily meet the ASTM A-53 
specification. However, pipes meeting the A-53 or API 5L specifications 
do not necessarily meet the A-106 specification. To avoid maintaining 
separate production runs and separate inventories, manufacturers triple 
certify the pipes. Since distributors sell the vast majority of this 
product, they can thereby maintain a single inventory to service all 
customers.
    The primary application of ASTM A-106 pressure pipes and triple 
certified pipes is in pressure piping systems by refineries, 
petrochemical plants and chemical plants. Other applications are in 
power generation plants (electrical-fossil fuel or nuclear), and in 
some oil field uses (on shore and off shore) such as for separator 
lines, gathering lines and metering runs. A minor application of this 
product is for use as oil and gas distribution lines for commercial 
applications. These applications constitute the majority of the market 
for the subject seamless pipes. However, A-106 pipes may be used in 
some boiler applications.
    The scope of the order includes all seamless pipe meeting the 
physical parameters described above and produced to one of the 
specifications listed above, regardless of application, and whether or 
not also certified to a non-covered specification. Standard, line and 
pressure applications and the above-listed specifications are defining 
characteristics of the scope of the order. Therefore, seamless pipes 
meeting the physical description above, but not produced to the A-335, 
A-106, A-53, or API 5L standards shall be covered if used in a 
standard, line or pressure application.
    For example, there are certain other ASTM specifications of pipe 
which, because of overlapping characteristics, could potentially be 
used in A-106 applications. These specifications generally include A-
162, A-192, A-210, A-333, and A-524. When such pipes are used in a 
standard, line or pressure pipe application, such products are covered 
by the scope of the order.
    Specifically excluded from the order are boiler tubing and 
mechanical tubing, if such products are not produced to A- 335, A-106, 
A-53 or API 5L specifications and are not used in standard, line or 
pressure applications. In addition, finished and unfinished oil country 
tubular goods (``OCTG'') are excluded from the scope of the order, if 
covered by the scope of another antidumping duty order from the same 
country. If not covered by such an OCTG order, finished and unfinished 
OCTG are included in the scope when used in standard, line or pressure 
applications. Finally, also excluded from the order are redraw hollows 
for cold-drawing when used in the production of cold-drawn pipe or 
tube.
    Although the HTSUS subheadings are provided for convenience and 
customs purposes, the written description of the scope of this order is 
dispositive.

Analysis of Comments Received

    All issues raised in this review, including the likelihood of 
continuation or recurrence of dumping in the event of revocation and 
the magnitude of the margins likely to prevail if the order were 
revoked, are addressed in the accompanying Issues and Decision 
Memorandum dated concurrently with, and hereby adopted by, this notice. 
The Issues and Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at http://access.trade.gov, and 
to all parties in the Central Records Unit, Room B8024 of the main 
Department of Commerce building. In addition, a complete version of the 
Issues and Decision Memorandum can be accessed directly on the Internet 
at http://enforcement.trade.gov/frn/. The signed Issues and Decision 
Memorandum and the electronic version of the Issues and Decision 
Memorandum are identical in content.

Final Results of Sunset Review

    Pursuant to sections 751(c)(1) and 752(c)(1) and (3) of the Act, we 
determine that revocation of the antidumping duty order on seamless 
pipe from Germany would be likely to lead to continuation or recurrence 
of dumping, and that the magnitude of the dumping margins likely to 
prevail would be weighted-average dumping margins up to 57.72 percent.

Notification to Interested Parties

    This notice serves as the only reminder to parties subject to an 
administrative protective order (APO) of their responsibility 
concerning the return or destruction of proprietary information 
disclosed under APO in accordance with 19 CFR 351.305. Timely 
notification of the return or destruction of APO materials or 
conversion to judicial protective order is hereby requested. Failure to 
comply with the regulations and terms of an APO is a violation which is 
subject to sanction.
    We are issuing and publishing these results and notice in 
accordance with sections 751(c), 752(c), and 777(i)(1) of the Act and 
19 CFR 351.218.

    Dated: November 29, 2017.
Gary Taverman,
Deputy Assistant Secretary for Antidumping and Countervailing Duty 
Operations, performing the non-exclusive functions and duties of the 
Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary
II. Background
III. Scope of the Order
IV. History of the Order
V. Legal Framework
VI. Discussion of the Issues
    1. Likelihood of Continuation or Recurrence of Dumping
    2. Magnitude of the Margin Likely To Prevail
VII. Final Results of Sunset Review
VIII. Recommendation

[FR Doc. 2017-26208 Filed 12-5-17; 8:45 am]
BILLING CODE 3510-DS-P

57578 Federal Register / Vol. 82, No. 233 / Wednesday, December 6, 2017 / Notices

the United States are commonly Therefore, seamless pipes meeting the Final Results of Sunset Review
produced to the ASTM A–106 standard. physical description above, but not
Seamless standard pipes are most produced to the A–335, A–106, A–53, or Pursuant to sections 751(c)(1) and
commonly produced to the ASTM A–53 API 5L standards shall be covered if 752(c)(1) and (3) of the Act, we
specification and generally are not used in a standard, line or pressure determine that revocation of the
intended for high temperature service. application. antidumping duty order on seamless
They are intended for the low For example, there are certain other pipe from Germany would be likely to
temperature and pressure conveyance of ASTM specifications of pipe which, lead to continuation or recurrence of
water, steam, natural gas, air and other because of overlapping characteristics, dumping, and that the magnitude of the
liquids and gasses in plumbing and could potentially be used in A–106 dumping margins likely to prevail
heating systems, air conditioning units, applications. These specifications would be weighted-average dumping
automatic sprinkler systems, and other generally include A–162, A–192, A–210, margins up to 57.72 percent.
related uses. Standard pipes (depending A–333, and A–524. When such pipes
on type and code) may carry liquids at are used in a standard, line or pressure Notification to Interested Parties
elevated temperatures but must not pipe application, such products are
exceed relevant ASME code covered by the scope of the order. This notice serves as the only
requirements. Specifically excluded from the order reminder to parties subject to an
Seamless line pipes are intended for are boiler tubing and mechanical tubing, administrative protective order (APO) of
the conveyance of oil and natural gas or if such products are not produced to A– their responsibility concerning the
other fluids in pipe lines. Seamless line 335, A–106, A–53 or API 5L return or destruction of proprietary
pipes are produced to the API 5L specifications and are not used in information disclosed under APO in
specification. standard, line or pressure applications. accordance with 19 CFR 351.305.
Seamless pipes are commonly In addition, finished and unfinished oil Timely notification of the return or
produced and certified to meet ASTM country tubular goods (‘‘OCTG’’) are destruction of APO materials or
A–106, ASTM A–53 and API 5L excluded from the scope of the order, if conversion to judicial protective order is
specifications. Such triple certification covered by the scope of another hereby requested. Failure to comply
of pipes is common because all pipes antidumping duty order from the same with the regulations and terms of an
meeting the stringent A–106 country. If not covered by such an APO is a violation which is subject to
specification necessarily meet the API OCTG order, finished and unfinished sanction.
5L and ASTM A–53 specifications. OCTG are included in the scope when
Pipes meeting the API 5L specification used in standard, line or pressure We are issuing and publishing these
necessarily meet the ASTM A–53 applications. Finally, also excluded results and notice in accordance with
specification. However, pipes meeting from the order are redraw hollows for sections 751(c), 752(c), and 777(i)(1) of
the A–53 or API 5L specifications do not cold-drawing when used in the the Act and 19 CFR 351.218.
necessarily meet the A–106 production of cold-drawn pipe or tube. Dated: November 29, 2017.
specification. To avoid maintaining Although the HTSUS subheadings are
Gary Taverman,
separate production runs and separate provided for convenience and customs
inventories, manufacturers triple certify purposes, the written description of the Deputy Assistant Secretary for Antidumping
the pipes. Since distributors sell the vast scope of this order is dispositive. and Countervailing Duty Operations,
performing the non-exclusive functions and
majority of this product, they can
Analysis of Comments Received duties of the Assistant Secretary for
thereby maintain a single inventory to
All issues raised in this review, Enforcement and Compliance.
service all customers.
The primary application of ASTM A– including the likelihood of continuation Appendix
106 pressure pipes and triple certified or recurrence of dumping in the event
pipes is in pressure piping systems by of revocation and the magnitude of the List of Topics Discussed in the Issues and
margins likely to prevail if the order Decision Memorandum
refineries, petrochemical plants and
chemical plants. Other applications are were revoked, are addressed in the I. Summary
in power generation plants (electrical- accompanying Issues and Decision II. Background
fossil fuel or nuclear), and in some oil Memorandum dated concurrently with, III. Scope of the Order
field uses (on shore and off shore) such and hereby adopted by, this notice. The IV. History of the Order
as for separator lines, gathering lines Issues and Decision Memorandum is a V. Legal Framework
and metering runs. A minor application public document and is on file VI. Discussion of the Issues
of this product is for use as oil and gas electronically via Enforcement and 1. Likelihood of Continuation or
distribution lines for commercial Compliance’s Antidumping and Recurrence of Dumping
applications. These applications Countervailing Duty Centralized 2. Magnitude of the Margin Likely To
constitute the majority of the market for Electronic Service System (ACCESS). Prevail
the subject seamless pipes. However, A– ACCESS is available to registered users VII. Final Results of Sunset Review
106 pipes may be used in some boiler at http://access.trade.gov, and to all VIII. Recommendation
applications. parties in the Central Records Unit, [FR Doc. 2017–26208 Filed 12–5–17; 8:45 am]
The scope of the order includes all Room B8024 of the main Department of BILLING CODE 3510–DS–P
seamless pipe meeting the physical Commerce building. In addition, a
parameters described above and complete version of the Issues and
daltland on DSKBBV9HB2PROD with NOTICES

produced to one of the specifications Decision Memorandum can be accessed
listed above, regardless of application, directly on the Internet at http://
and whether or not also certified to a enforcement.trade.gov/frn/. The signed
non-covered specification. Standard, Issues and Decision Memorandum and
line and pressure applications and the the electronic version of the Issues and
above-listed specifications are defining Decision Memorandum are identical in
characteristics of the scope of the order. content.

VerDate Sep<11>2014 18:07 Dec 05, 2017 Jkt 244001 PO 00000 Frm 00010 Fmt 4703 Sfmt 9990 E:\FR\FM\06DEN1.SGM 06DEN1

Document Created: 2017-12-06 00:21:41
Document Modified: 2017-12-06 00:21:41

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Notices
Dates		Applicable December 6, 2017.
FR Citation		82 FR 57577

82 FR 57577 - Certain Small Diameter Seamless Carbon and Alloy Standard, Line and Pressure Pipe From Germany: Final Results of the Expedited Fourth Sunset Review of the Antidumping Duty Order

DEPARTMENT OF COMMERCEInternational Trade Administration

Federal Register Volume 82, Issue 233 (December 6, 2017)

DEPARTMENT OF COMMERCE
International Trade Administration