82_FR_57882 82 FR 57649 - Reports, Forms and Record Keeping Requirements; Agency Information Collection Activity Under OMB Review

82 FR 57649 - Reports, Forms and Record Keeping Requirements; Agency Information Collection Activity Under OMB Review

DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration

Federal Register Volume 82, Issue 233 (December 6, 2017)

Page Range57649-57649
FR Document2017-26234

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on September 8, 2017 [82 FR 42572]. The agency received no comments.

Federal Register, Volume 82 Issue 233 (Wednesday, December 6, 2017) 
[Federal Register Volume 82, Number 233 (Wednesday, December 6, 2017)]
[Notices]
[Page 57649]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2017-26234]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration


Reports, Forms and Record Keeping Requirements; Agency 
Information Collection Activity Under OMB Review

AGENCY: National Highway Traffic Safety Administration (NHTSA), U.S. 
Department of Transportation (DOT).

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

SUMMARY: In compliance with the Paperwork Reduction Act of 1995 (44 
U.S.C. 3501 et seq.), this notice announces that the Information 
Collection Request abstracted below is being forwarded to the Office of 
Management and Budget (OMB) for review and comments. A Federal Register 
Notice with a 60-day comment period soliciting comments on the 
following information collection was published on September 8, 2017 [82 
FR 42572]. The agency received no comments.

DATES: Comments must be submitted on or before January 5, 2018.

ADDRESSES: Send comments, within 30 days, to the Office of Information 
and Regulatory Affairs, Office of Management and Budget, 725 17th 
Street NW., Washington, DC 20503, Attention NHTSA Desk Officer.

FOR FURTHER INFORMATION CONTACT: Joshua Fikentscher at the National 
Highway Traffic Safety Administration, Office of Crash Avoidance 
Standards, 1200 New Jersey Avenue SE., West Building, Room W43-467, 
Washington, DC 20590. Mr. Fikentscher's phone number is 202-366-1688.

SUPPLEMENTARY INFORMATION: 

National Highway Traffic Safety Administration

    Title: Brake Hose Manufacturers Identification.
    OMB Control Number: 2127-0052.
    Type of Review: Request for public comments on a previously 
approved collection of information.
    Abstract: 49 U.S.C. 30101 et seq., as amended (``the Safety Act''), 
authorizes NHTSA to issue Federal Motor Vehicle Safety Standards 
(FMVSSs). The Safety Act mandates that in issuing any FMVSS, the agency 
is to consider whether the standard is reasonable and appropriate for 
the particular type of motor vehicle or item of motor vehicle equipment 
for which it is prescribed. Using this authority, FMVSS No. 106, Brake 
Hoses, was issued. This standard specifies labeling and performance 
requirements which apply to all manufacturers of brake hoses and brake 
hose end fittings, and to those who assemble brake hoses (49 CFR 
571.106).
    Prior to assembling or selling brake hoses, these entities must 
register their identification marks with NHTSA to comply with the 
labeling requirements of this standard. In accordance with the 
Paperwork Reduction Act, the agency must obtain OMB approval to 
continue collecting labeling information. Currently, there are 2,418 
manufacturers of brake hoses and end fittings, and brake hose 
assemblers, registered with NHTSA. However, about 60 respondents 
annually (annual average from 2014-2016) request to have their 
identification marks added to or removed from the NHTSA database. To 
comply with this standard, each brake hose manufacturer or assembler 
must contact NHTSA and state that they want to be added to or removed 
from the NHTSA database of registered brake hose manufacturers. This 
action is usually initiated by the manufacturer with a brief written 
request via U.S. mail, facsimile, an email message, or a telephone 
call. Since September 1, 2015, the request can be submitted via the 
Manufacturer Portal: Online Web-based Submittal Center (https://vpic.nhtsa.dot.gov). Currently, about 90 percent of requests are 
received electronically and 10 percent via mail. The estimated time for 
complying with the labeling requirements of this regulation is 1.5 
hours per manufacturer. The corresponding total annual burden is 
estimated to be 90 hours (time burden of 1.5 hours per manufacturer x 
60 manufacturers). The estimated manufacturer's cost for complying with 
this regulation is $100 per hour. Therefore, the total annual cost is 
estimated to be $9,000 (time burden of 90 hours x $100 cost per hour).
    Affected Public: Business or other for profit.
    Number of Respondents: 60.
    Number of Responses: 60.
    Total Annual Burden: 90 hours.
    Comments are invited on: Whether the proposed collection of 
information is necessary for the proper performance of the functions of 
the Department, including whether the information will have practical 
utility; the accuracy of the Department's estimate of the burden of the 
proposed information collection; ways to enhance the quality, utility 
and clarity of the information to be collected; and ways to minimize 
the burden of the collection of information on respondents, including 
the use of automated collection techniques or other forms of 
information technology. A comment to OMB is most effective if OMB 
receives it within 30 days of publication.

    Authority: Paperwork Reduction Act of 1995, 44 U.S.C. Chapter 
35; delegation of authority at 49 CFR 1.95.

Raymond R. Posten,
Associate Administrator for Rulemaking.
[FR Doc. 2017-26234 Filed 12-5-17; 8:45 am]
 BILLING CODE 4910-59-P

Federal Register / Vol. 82, No. 233 / Wednesday, December 6, 2017 / Notices 57649 Affected Public: Businesses or other Street NW., Washington, DC 20503, electronically and 10 percent via mail. profit organizations. Attention NHTSA Desk Officer. The estimated time for complying with Estimated Total Annual Burden: FOR FURTHER INFORMATION CONTACT: the labeling requirements of this NHTSA estimates that the Joshua Fikentscher at the National regulation is 1.5 hours per manufacturers will incur a total annual Highway Traffic Safety Administration, manufacturer. The corresponding total reporting hour of 1 hour. Office of Crash Avoidance Standards, annual burden is estimated to be 90 Comments are invited on: Whether 1200 New Jersey Avenue SE., West hours (time burden of 1.5 hours per the proposed collection of information Building, Room W43–467, Washington, manufacturer × 60 manufacturers). The is necessary for the proper performance DC 20590. Mr. Fikentscher’s phone estimated manufacturer’s cost for of the functions of the Department, number is 202–366–1688. complying with this regulation is $100 including whether the information will SUPPLEMENTARY INFORMATION: per hour. Therefore, the total annual have practical utility; the accuracy of cost is estimated to be $9,000 (time the Department’s estimate of the burden National Highway Traffic Safety burden of 90 hours × $100 cost per of the proposed information collection; Administration hour). ways to enhance the quality, utility and Title: Brake Hose Manufacturers Affected Public: Business or other for clarity of the information to be Identification. profit. collected; and ways to minimize the OMB Control Number: 2127–0052. Number of Respondents: 60. burden of the collection of information Number of Responses: 60. Type of Review: Request for public on respondents, including the use of Total Annual Burden: 90 hours. comments on a previously approved Comments are invited on: Whether automated collection techniques or collection of information. other forms of information technology. the proposed collection of information Abstract: 49 U.S.C. 30101 et seq., as is necessary for the proper performance A comment to OMB is most effective if amended (‘‘the Safety Act’’), authorizes OMB receives it within 30 days of of the functions of the Department, NHTSA to issue Federal Motor Vehicle including whether the information will publication. Safety Standards (FMVSSs). The Safety have practical utility; the accuracy of Authority: Paperwork Reduction Act of Act mandates that in issuing any the Department’s estimate of the burden 1995, 44 U.S.C. Chapter 35; delegation of FMVSS, the agency is to consider authority at 49 CFR 1.95. of the proposed information collection; whether the standard is reasonable and ways to enhance the quality, utility and Raymond R. Posten, appropriate for the particular type of clarity of the information to be Associate Administrator for Rulemaking. motor vehicle or item of motor vehicle collected; and ways to minimize the equipment for which it is prescribed. burden of the collection of information [FR Doc. 2017–26236 Filed 12–5–17; 8:45 am] Using this authority, FMVSS No. 106, on respondents, including the use of BILLING CODE 4910–59–P Brake Hoses, was issued. This standard automated collection techniques or specifies labeling and performance other forms of information technology. DEPARTMENT OF TRANSPORTATION requirements which apply to all A comment to OMB is most effective if manufacturers of brake hoses and brake OMB receives it within 30 days of National Highway Traffic Safety hose end fittings, and to those who publication. Administration assemble brake hoses (49 CFR 571.106). Prior to assembling or selling brake Authority: Paperwork Reduction Act of 1995, 44 U.S.C. Chapter 35; delegation of Reports, Forms and Record Keeping hoses, these entities must register their authority at 49 CFR 1.95. Requirements; Agency Information identification marks with NHTSA to Collection Activity Under OMB Review comply with the labeling requirements Raymond R. Posten, of this standard. In accordance with the Associate Administrator for Rulemaking. AGENCY: National Highway Traffic Paperwork Reduction Act, the agency [FR Doc. 2017–26234 Filed 12–5–17; 8:45 am] Safety Administration (NHTSA), U.S. must obtain OMB approval to continue BILLING CODE 4910–59–P Department of Transportation (DOT). collecting labeling information. ACTION: Notice and request for Currently, there are 2,418 manufacturers comments. of brake hoses and end fittings, and DEPARTMENT OF TRANSPORTATION brake hose assemblers, registered with SUMMARY: In compliance with the National Highway Traffic Safety NHTSA. However, about 60 respondents Paperwork Reduction Act of 1995 (44 Administration annually (annual average from 2014– U.S.C. 3501 et seq.), this notice 2016) request to have their announces that the Information Reports, Forms and Record Keeping identification marks added to or Collection Request abstracted below is Requirements; Agency Information removed from the NHTSA database. To being forwarded to the Office of Collection Activity Under OMB Review comply with this standard, each brake Management and Budget (OMB) for hose manufacturer or assembler must AGENCY: National Highway Traffic review and comments. A Federal contact NHTSA and state that they want Safety Administration, U.S. Department Register Notice with a 60-day comment to be added to or removed from the of Transportation. period soliciting comments on the NHTSA database of registered brake ACTION: Notice and request for following information collection was hose manufacturers. This action is comments. published on September 8, 2017 [82 FR usually initiated by the manufacturer 42572]. The agency received no with a brief written request via U.S. SUMMARY: In compliance with the comments. daltland on DSKBBV9HB2PROD with NOTICES mail, facsimile, an email message, or a Paperwork Reduction Act of 1995 (44 DATES: Comments must be submitted on telephone call. Since September 1, 2015, U.S.C. 3501 et seq.), this notice or before January 5, 2018. the request can be submitted via the announces that the Information ADDRESSES: Send comments, within 30 Manufacturer Portal: Online Web-based Collection Request (ICR) abstracted days, to the Office of Information and Submittal Center (https:// below has been forwarded to the Office Regulatory Affairs, Office of vpic.nhtsa.dot.gov). Currently, about 90 of Management and Budget (OMB) for Management and Budget, 725 17th percent of requests are received review and comment. The ICR describes VerDate Sep<11>2014 18:07 Dec 05, 2017 Jkt 244001 PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 E:\FR\FM\06DEN1.SGM 06DEN1


Document Created: 2017-12-06 00:21:32
Document Modified: 2017-12-06 00:21:32
CategoryRegulatory Information
CollectionFederal Register
sudoc ClassAE 2.7:
GS 4.107:
AE 2.106:
PublisherOffice of the Federal Register, National Archives and Records Administration
SectionNotices
ActionNotice and request for comments.
DatesComments must be submitted on or before January 5, 2018.
ContactJoshua Fikentscher at the National Highway Traffic Safety Administration, Office of Crash Avoidance Standards, 1200 New Jersey Avenue SE., West Building, Room W43-467, Washington, DC 20590. Mr. Fikentscher's phone number is 202-366-1688.
FR Citation82 FR 57649 
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR