82 FR 59505 - Safety Standard for Children's Folding Chairs and Stools
CONSUMER PRODUCT SAFETY COMMISSION Federal Register Volume 82, Issue 240 (December 15, 2017)
Federal Register Volume 82, Issue 240 (December 15, 2017)
| Page Range | 59505-59511 | |
| FR Document | 2017-26997 |
[Federal Register Volume 82, Number 240 (Friday, December 15, 2017)] [Rules and Regulations] [Pages 59505-59511] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-26997] ======================================================================== Rules and Regulations Federal Register ________________________________________________________________________ This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510. The Code of Federal Regulations is sold by the Superintendent of Documents. ======================================================================== Federal Register / Vol. 82, No. 240 / Friday, December 15, 2017 / Rules and Regulations [[Page 59505]] CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1112, 1130, and 1232 [Docket No. CPSC-2015-0029] Safety Standard for Children's Folding Chairs and Stools AGENCY: Consumer Product Safety Commission. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: The Danny Keysar Child Product Safety Notification Act, section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA), requires the United States Consumer Product Safety Commission (Commission or CPSC) to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards, or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is issuing a safety standard for children's folding chairs and stools in response to the direction under Section 104(b) of the CPSIA. In addition, the Commission is amending its regulations regarding third party conformity assessment bodies to include the safety standard for children's folding chairs and stools in the list of Notices of Requirements (NORs) issued by the Commission. Finally, the Commission is amending its regulations establishing requirements for consumer registration of durable infant or toddler products to identify children's folding stools as a durable infant or toddler product. DATES: This rule will become effective June 15, 2018. The incorporation by reference of the publication listed in this rule is approved by the Director of the Federal Register as of June 15, 2018. FOR FURTHER INFORMATION CONTACT: Keysha Walker, Office of Compliance and Field Operations, U.S. Consumer Product Safety Commission; 4330 East West Highway, Bethesda, MD 20814; email: [email protected]; telephone: (301) 504-6820. SUPPLEMENTARY INFORMATION: I. Background and Statutory Authority The CPSIA was enacted on August 14, 2008. Section 104(b) of the CPSIA, part of the Danny Keysar Child Product Safety Notification Act, requires the Commission to: (1) Examine and assess the effectiveness of voluntary consumer product safety standards for durable infant or toddler products, in consultation with representatives of consumer groups, juvenile product manufacturers, and independent child product engineers and experts; and (2) promulgate consumer product safety standards for durable infant or toddler products. Standards issued under section 104 are to be ``substantially the same as'' the applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. On October 19, 2015, the Commission issued a notice of proposed rulemaking (NPR) for children's folding chairs and stools. 80 FR 63155. The NPR proposed to incorporate by reference the voluntary standard that was in effect at that time, ASTM F2613-14, Standard Consumer Safety Specification for Children's Chairs and Stools. ASTM F2613-14 contained testing and performance requirements for any chair or stool used by a single child who can get in and get out of the product unassisted and with a seat height 15 inches or less with or without a rocking base. The NPR proposed to limit the scope of the mandatory standard to folding chairs and stools because the hazards presented by folding chairs and stools are different from non-folding chairs and stools. In addition, the NPR proposed to change the stability test method to add a new performance requirement and test method to address sideways stability incidents in addition to rearwards stability incidents, and to revise the marking and labeling sections. Since the NPR was issued, ASTM has revised ASTM F2613-14 several times, as discussed in section V of this preamble. The current version of the standard is ASTM F2613-17a. In this document, the Commission is issuing a mandatory safety standard that incorporates by reference the most recent voluntary standard, developed by ASTM International, ASTM F2613-17a, for children's folding chairs and stools. The mandatory standard does not include non-folding chairs and stools. The Commission is not making any other modifications to the ASTM standard. As required by section 104(b)(1)(A), the Commission consulted with manufacturers, retailers, trade organizations, laboratories, consumer advocacy groups, consultants, and the public to develop the standard, largely through the ASTM process. In addition, as required by section 14 of the Consumer Product Safety Act (CPSA), the final rule amends the list of NORs issued by the Commission in 16 CFR part 1112 to include the standard for children's folding chairs and stools. The final rule also amends the product registration rule in 16 CFR part 1130 to identify children's folding stools, in addition to children's folding chairs, as a durable infant or toddler product for purposes of consumer product registration requirements. II. Product Description The current voluntary standard, ASTM F2613-17a, describes a children's folding chair or stool as seating furniture with a seat height of 15 inches or less with a rigid frame that is intended to be used as a support for the body, limbs, or feet of a child when sitting or resting in an upright or reclining position, can be folded for transport or storage, and may include a rocking base. The product is intended to be used by a single child who can get out of the chair unassisted. ASTM F26132-17a also includes a definition for ``chairs with side containment'' to describe ``a children's chair or folding chair with armrests or otherwise designed in a shape which provides barriers in the vertical direction above the seating surface to the occupant's left and right which can act like arms or other side structures.'' Other definitions remain unchanged from ASTMF2613-14. A ``children's chair'' is defined as ``seating furniture with a rigid frame that is intended to be used as a support for the body, limbs, or feet of a child when sitting or resting [[Page 59506]] in an upright or reclining position.'' A ``children's stool'' is defined as a ``children's chair without back, or armrest.'' A ``folding chair'' and ``folding stool'' is defined as ``a children's chair or stool which can be folded for transport or storage.'' In the NPR, the Commission proposed to limit the scope of the mandatory standard to folding chairs and stools because the hazards presented by folding chairs and folding stools are different from non-folding chairs and stools. In this document, the Commission incorporates by reference ASTM F2613-17a, but continues to limit the scope of the mandatory standard to folding chairs and stools. III. Market Description CPSC staff's review of the market shows that there are currently 13 domestic firms, rather than 14 domestic firms identified in the NPR, supplying children's folding chairs and/or folding stools to the U.S. market. Three firms are large and ten firms are considered small according to the Small Business Administration (SBA) criteria.\1\ The Juvenile Products Manufacturers Association (JPMA) maintains a certification program for children's folding chairs and folding stools, and there is one active participant at this time. Other than this certification program, compliance with the ASTM standard is self- reported. Two additional children's folding chair suppliers claim compliance with the voluntary standard. --------------------------------------------------------------------------- \1\ The Small Business Administration categorizes manufacturers as ``small'' if they have fewer than 500 employees and importers or wholesalers as small if they have fewer than 100 employees. --------------------------------------------------------------------------- IV. Incident Data The preamble to the NPR summarized the incident data covering the period from January 2003 through December 31, 2014. CPSC staff identified a total of 98 incidents, including 45 nonfatal injuries, related to children's folding chairs or stools that were reported to have occurred. Since the publication of the NPR, CPSC staff has received ten new reports of incidents. Two of the incidents occurred in July and December of 2014, but were not fully investigated or reported until 2015. Of the other eight incidents, two occurred in 2015, three in 2016, and three in 2017. All ten incidents involved folding chairs intended for children under age 5. They were reported under CPSC's Consumer Product Safety Risk Management System (CPSRMS). Seven indicated some form of injury, including amputation or fracture of a finger, bruising (petechiae) of an arm, and head injuries due to falls. Additionally, since December 31, 2014, CPSC staff's review of the National Electronic Injury Surveillance System (NEISS) included several reports of folding chair incidents, but there was insufficient information to determine which, if any, of the NEISS cases involved folding chairs intended for children under the age of 5. Most of the hazards identified in the new incidents are consistent with the hazard patterns identified among the incidents presented in the NPR briefing package, with pinch/shear hazards the most common hazard category. V. Overview of ASTM F2613 The voluntary standard, ASTM F2613, Standard Consumer Safety Specification for Children's Chairs and Stools, was first approved and published in 2007. The scope of products covered by the original version, F2613-07, was limited to ``children's folding chairs'' with a seat height of 15 inches or less. Significant revisions were made in 2013, in ASTM F2613-13, that were designed to expand the scope of the voluntary standard to all children's chairs and stools. On October 19, 2015, the Commission proposed to incorporate by reference ASTM F2613- 14, with modifications. 80 FR 63155. Since the publication of the NPR, the standard has been revised four additional times, as discussed below. The current voluntary standard for children's chairs and stools is ASTM F2613-17a. A. ASTM F2613-16 ASTM F2613-16 was published in May 2016. The changes adopted in ASTM F2613-16 included the following revisions:Added a definition for chairs with side containment (a children's chair or folding chair with armrests or otherwise designed in a shape which provides barriers in the vertical direction above the seating surface to the occupant's left and right, which can act like arms or side structures); Added a test requirement and test method for sideways stability for chairs with side containment; Added a diagram for measuring seat surface height; Added a diagram for side stability test. B. ASTM F2613-16 [epsiv]1 ASTM F2613-16 [epsiv]1 was published in June 2016. ASTM published an editorial revision, which corrected a printing error which had distorted the diagram in Figure 4, and a typographical error in paragraph 6.8.1.1, revising the test surface angle tolerance from +/-5 degree to +/-0.5 degree. C. ASTM F2613-17 ASTM F2613-17 was published in August 2017 with the following revisions: Modifications to the marking and labeling section of ASTM F2613-16 [epsiv]1 to address the changes proposed in the NPR. Modifications to the stability test performed on chairs with non-rigid seats to clarify the placement of the test cylinder during the stability test. Modifications to the folding mechanisms and hinges section of F2613-16 [epsiv]1 to clarify that chairs that fold are required to either have a locking mechanism to prevent folding of the chair by the child, or have adequate hinge-line clearance to prevent pinching and lacerations during folding. Modification of the standard's scope to exempt children's potties. D. ASTM F2613-17a The current version, ASTM F2613-17a, was published in October 2017. The revision makes minor editorial changes including the removal of side stability testing for stools because chairs and stools without side containment are exempt from side stability testing, and stools, by definition, do not have side containment. In addition, an incorrect reference to Fig.1 (Tension test Adaptor/Clamp) is removed. ASTM F2613-17a addresses the issues raised in the NPR by strengthening the provisions of the voluntary standard. The current standard clarifies in section 5.8 (Products that Fold) that chairs that fold are required to either have a latching or locking mechanism to prevent folding of the chair by the child, or have adequate hinge-line clearance to prevent pinching and lacerations during folding. These requirements are intended to eliminate possible crushing, laceration, or pinching hazards that might occur in folding latching or locking mechanisms and hinges. In addition, the current standard now includes, under section 6.8 (Stability Test Method), a sideways stability test, in addition to a rearward stability test. The standard also clarifies proper cylinder positioning for chairs and stools for stability testing. The addition of the sideways stability test, in addition to the rearwards stability test will help address incidents that involve children's chairs with side containment tipping sideways or rearwards. ASTM F2613-17a also incorporates the recommendations developed by the ASTM Ad Hoc Committee on [[Page 59507]] Standardized Wording for Juvenile Product Standards (ASTM Ad Hoc Task Group), and the proposed language in the NPR. The current standard specifies that each folding chair and folding stool that does not meet the hinge line clearance requirements must have a warning label that contains statements consistent with the proposed language in the NPR. Specifically, the warning label shall contain the words ``Amputation Hazard'' and address the following: Chair can fold or collapse if lock not fully engaged. Moving parts can amputate child's fingers. Keep fingers away from moving parts. Completely unfold chair and fully engage locks before allowing child to sit in a chair. Never allow child to fold or unfold chair. The Commission believes that ASTM F2613-17a provides clarifications to the standard and addresses the issues raised in the NPR for children's folding chairs and stools by adopting more stringent requirements than those in the ASTM version referenced in the NPR. Accordingly, the Commission incorporates ASTM F2613-17a, by reference, in the final rule for the CPSC's safety standard for children's folding chairs and stools. VI. Response to Comments The Commission received nine comments in response to the NPR. A summary of each comment and a response is provided below. A. Scope of the Rule Comment: One commenter stated that the scope of the mandatory standard should not be limited to just folding chairs and stools, and that the CPSC should include all non-folding chairs and stools in the standard. Response: As we stated in the NPR, CPSC staff conducted a preliminary review of the incident data involving all children's chairs and stools. Some hazards are common among both folding and non-folding products such as tip overs, falling out of the chair, loose parts, staples or, other protruding objects with the potential for lacerations requiring sutures. However, the staff's review showed that the hazard associated with the folding mechanism in folding chairs and stools could result in the most serious injury, including pinching/scissoring, finger amputations, degloving or compound fracture, which could be addressed in a mandatory standard. Due to the variety of non-folding children's chair products in the market, including certain infant chairs/seats, the Commission concludes that additional study and testing regarding any potential hazards associated with non-folding chairs/stools will need to be conducted before the CPSC could propose performance requirements in a standard. To that end, CPSC staff will continue to evaluate incident data regarding non-folding chairs and stools and will make a recommendation to the Commission, if further action is required. Comment: One commenter requested that the Commission clarify that the mandatory standard excludes toy seats. Response: ASTM F963-17, Standard Consumer Safety Specification for Toy Safety (which is a CPSC mandatory standard, 16 CFR part 1250) specifically covers toy seats that have play features. Section 3.1.93 of ASTM F963-17 provides that a ``toy seat'' is a stationary toy product with a seat where the amusement of the child is a primary function of the product and the play pattern intends that the child be in a seated position. Section 3.1.93.1 further explains that play features may include, but are not limited to, sliding or rotating features, learning toys, manually actuated music, with which the seated child may interact. Children's furniture products without any interactive play features such as stools, chairs, patio sets, rocking chairs, picnic tables, storage units, are not considered toy seats. In addition, section 3.1.93.1 provides that juvenile products such as bouncers, infant seats, and stationary activity centers are not considered toy seats. Accordingly, toy seats are adequately addressed in ASTM F963-17, and the Commission does not believe that further clarification is necessary. B. Stability Test Method Comment: One commenter noted that the original stability test requirement in ASTM F2613-14, for chairs with soft seating surfaces, specified that the test cylinder should be replaced with a weighted bag filled with steel shot. However, the commenter questioned why the provision for soft seating surfaces was deleted. Response: During the development of the proposed modification to address sideways stability incidents, CPSC staff determined that all chairs should be tested with the same test cylinder for consistency and the option for testing with a weighted bag was removed. After publication of the NPR, ASTM balloted and approved a modification which is consistent with proposed NPR. ASTM F2613-16 included a sideways stability test and removed the option to conduct stability testing with a weighted bag. This stability requirement has not been changed in the current version, ASTM F2613-17a. Accordingly, this issue has been adequately addressed. Comment: Two commenters stated that during development of requirements for sideways stability, a review of CPSC incident data indicated that side stability issues were limited to chairs with side containment, such as arms, and did not support a requirement for sideways stability testing for chairs without side containment. Response: Since the NPR was issued, ASTM balloted and approved a modification, first incorporated into ASTM F2613-16, and retained in the current version, ASTM F2613-17a, which excludes chairs without side containment from the sideways stability testing. Although CPSC's rule does not apply to non-folding chairs, the ASTM standard applies to both folding and non-folding chairs. Because incident data does not show problems with the sideways stability of chairs without arms, the Commission agrees that folding chairs and stools without side containment also should be excluded from the sideways stability testing requirement. Comment: One commenter stated that the proposed requirement for rearward stability is flawed because it specifies that the test cylinder be allowed to ``come to rest,'' but then requires further adjustment to its position to complete the testing. Response: Since the publication of the NPR, ASTM balloted and approved a modification, first incorporated into ASTM F2613-16, and retained in the current version, ASTM F2613-17a, which revised the test language to delete the words ``come to rest.'' The Commission agrees that the revised language, specified in ASTM F1613-17a removes inconsistent language regarding the rearward and side stability requirement. Accordingly, the Commission accepts the stability testing requirements as set forth in ASTM F2613-17a. C. Warning Label Comment: A number of commenters requested that the Commission delay publishing final warning requirements for children's folding chairs and stools until the ASTM Ad Hoc Task Group's recommendations are developed, balloted, and then incorporated into ASTM F2613. Response: After publication of the NPR, the ASTM Ad Hoc Task Group made its recommendations for warning label formatting across juvenile products. Accordingly, formatting issues including fonts, markings, and colors in [[Page 59508]] signal word panels addressed by the Ad Hoc Task Group were incorporated in ASTM F2613-17, and retained in ASTM F2613-17a. Therefore, the final rule incorporates by reference ASTM F2613-17a without any modification to the ASTM provisions on warning label format. Comment: One commenter stated that the proposed requirement for the warning label on stools is not clear. The commenter stated that the proposed requirement to place the label in a ``visible location'' is not defined. The commenter also stated that the proposal requiring that the label not ``wrap around the legs'' is unclear. Another commenter expressed concern that the requirement to ``contain sufficient white space'' is unclear and can be potentially misconstrued by laboratories evaluating compliance of a product. Response: Since the publication of the NPR, the labeling requirement was revised in ASTM F2613-17 and retained in the current version, ASTM F2613-17a, to require that all warnings shall be conspicuous and permanent. In addition, for products with limited space, the language ``contain sufficient white space'' was eliminated and warnings may be placed in two separate locations. Accordingly, this issue has been adequately addressed. Comment: Several commenters recommended that CPSC add pictograms to the warnings to convey the hazard more effectively and avoid language barriers that minimize comprehension of these warnings. Response: Although pictograms can help to convey the hazard that is presented, especially for users with limited or no English literacy, CPSC staff believes that designing effective pictograms for warning labels can present many challenges. The labeling section revised in ASTM F2613-17, and retained in the current version, ASTM F2613-17a, requires that the warnings shall be easy to read and understand and be in the English language at a minimum. Thus, the standard does not preclude the addition of other languages to address those groups who do not read English. However, CPSC staff will continue to review incidents and consider whether additional warning symbols are needed to further reduce the risk of injury associated with these products. D. Effective Date Comment: One commenter stated that small firms should have more time to comply with the rule. Response: The Commission intended that the proposed 6-month effective date would give all firms 6 months to produce, or find suppliers to produce, compliant products. The Commission believes that most firms should be able to comply within the 6-month time frame and allow ample time for manufacturers and importers to arrange for third party testing, consistent with the timeframe adopted in a number of other section 104 rules. The commenter did not provide any justification to support a longer effective date. Moreover, the Commission did not receive comments from any affected suppliers (manufacturer or importer) that suggested the proposed effective date was too short. Therefore, the Commission requires a 6-month effective date in the final rule. E. Cost Considerations Comment: One commenter stated that the Commission should have considered additional costs for importers, such as negotiation costs with foreign suppliers. The commenter also stated that the Commission should have considered the rule's potential effect on retail prices and the impact of higher prices on consumers. Response: CPSC staff conducted a regulatory flexibility analysis on the impact of the rule on small firms, including manufacturers, suppliers, and importers, as well as test laboratories, affected by the rulemaking. Staff's review showed that the rule will not have a significant economic impact on a substantial number of small entities. The Commission recognizes that an increase in costs for children's folding chair and stool suppliers could increase the retail price of these products; however, the Commission is required to promulgate consumer product safety standards on durable infant or toddler products, including on children's folding chairs and stools. VII. Description of the Final Rule A. Final Rule for Part 1232 and Incorporation by Reference Section 1232.2(a) of the final rule provides that folding chairs and stools must comply with the applicable sections of ASTM F2613-17a. The Office of the Federal Register (OFR) has regulations concerning incorporation by reference. 1 CFR part 51. These regulations require that, for a final rule, agencies must discuss in the preamble of the rule the way in which the materials the agency incorporates by reference are reasonably available to interested persons and how interested parties can obtain the materials. In addition, the preamble of the rule must summarize the material. 1 CFR 51.5(b). In accordance with the OFR's requirements, the discussion in this section summarizes the provisions of ASTM F2613-17a. Interested persons may purchase a copy of ASTM F2613-17a from ASTM, either through ASTM's website or by mail at the address provided in the rule. A copy of the standard may also be inspected at the CPSC's Office of the Secretary, U.S. Consumer Product Safety Commission. We note that the Commission and ASTM arranged for commenters to have ``read only'' access to ASTM F2613-14 during the NPR's comment period. ASTM F2613-17a contains requirements covering children's folding chairs and stools covering: Sharp points; Small parts; Lead in paint; Wood parts; Latching and locking mechanisms; Scissoring, shearing, and pinching Hinge line clearance; Circular holes in rigid materials; Labeling; Protective components; Strength requirements; and Stability The standard additionally contains test methods that must be used to assess conformity with these requirements. B. Amendment to 16 CFR Part 1112 To Include NOR for Children's Folding Chairs and Stools Standard The final rule amends part 1112 to add a new section 1112.15(b)(43) that lists 16 CFR part 1232, Safety Consumer Safety Specification for Children's Folding Chairs and Stools, as a children's product safety rule for which the Commission has issued an NOR. Section XIII of the preamble provides additional background information regarding certification of children's folding chairs and stools and issuance of an NOR. C. Amendment to 16 CFR Part 1130 To Include Children's Folding Chairs and Stools The statutory definition of ``durable infant or toddler product'' in section 104(f) of the CPSIA identified certain product categories as examples of products included under that definition. The Commission identified additional products as ``durable infant or toddler products'' when the Commission issued its rule requiring that manufacturers of durable infant or toddler products establish a program for consumer registration of those products. 16 CFR part 1130. Among the products the Commission added is ``children's folding chairs.'' Id. 1130.2(a)(13). As explained in the NPR, based on ASTM's [[Page 59509]] definitions, the Commission considers folding stools to be a subset of folding chairs. The configuration of children's folding chairs and folding stools are similar. The same potential hazards are presented in the folding mechanisms. The Commission is amending the definition section in the registration rule to make clear that both children's folding chairs and children's folding stools are considered durable infant or toddler products. Thus, the final rule amends part 1130, Requirements for Consumer Registration of Durable Infant or Toddler Products, by revising section 1130.2(a)(13) to add ``stools'' to the definition of children's folding chairs. VIII. Effective Date The Administrative Procedure Act (APA) generally requires that the effective date of a rule be at least 30 days after publication of the final rule. 5 U.S.C. 553(d). The safety standard for folding chairs and stools and the corresponding changes to part 1112, regarding requirements for third party conformity assessment bodies, and part 1130, regarding requirements for consumer registration of durable infant or toddler products, will become effective 6 months after publication of the final rule in the Federal Register. Without evidence to the contrary, CPSC generally considers 6 months to be sufficient time for suppliers to come into compliance with a new standard, and a 6-month effective date is typical for other CPSIA section 104 rules. Six months is also the period that JPMA typically allows for products in the JPMA certification program to transition to a new standard once that standard is published. The Commission proposed a 6-month effective date in the NPR for children's folding chairs and stools and we addressed the comment on the proposed effective date. Accordingly, the final rule for children's folding chairs and stools, as well as the amendments to parts 1112 and 1130, have a 6-month effective date. IX. Regulatory Flexibility Act A. Introduction The Regulatory Flexibility Act (RFA), 5 U.S.C. 601-612, requires that agencies review a proposed rule and a final rule for the rule's potential economic impact on small entities, including small businesses. Section 604 of the RFA generally requires that agencies prepare a final regulatory flexibility analysis (FRFA) when promulgating final rules, unless the head of the agency certifies that the rule will not have a significant economic impact on a substantial number of small entities. B. Impact on Small Businesses Based on the analysis summarized below, the Commission certifies that the rule will not have a significant economic impact on a substantial number of small entities. CPSC staff's review of the market shows that there are currently 13 domestic firms, rather than the 14 domestic firms identified in the NPR, supplying children's folding chairs and/or folding stools to the U.S. market. Of these, ten firms are considered small. Four of the small firms are manufacturers, five are importers or wholesalers, and the supply source for one firm could not be identified. Most firms only supply one model of chair, but one firm supplies four models and another firm supplies five models. Of the four small manufacturers of children's folding chairs and folding stools, one claims that its products comply with the voluntary standard and participates in the ASTM process. The compliance of the other three firms could not be determined. Of the five small importers/wholesalers, only one claims that its products comply with the ASTM standard. Staff could not determine the compliance status for the other four firms. For the firms currently in compliance with the voluntary standard, there should be minimal burden associated with compliance. The children's folding chairs from the three small manufacturers whose products that do not meet the voluntary standard may require redesign to comply with the voluntary standard. One manufacturer estimates the cost to completely redesign a chair to be $10,000, including nine to twelve months of research and development time. It does not appear that the economic impact would be significant for any of the small manufacturers (i.e., the cost would be less that 1 percent of annual revenue). In addition, although staff could not rule out a significant economic impact on one small importer of noncompliant folding chairs, staff does not expect the rule to have a significant economic impact on the three other non-compliant importers. Under section 14 of the CPSA, once new children's folding chairs and folding stools requirements become effective, all manufacturers will be subject to the third party testing and certification requirements. Third party testing will include any physical and mechanical test requirements specified in the final children's folding chairs and folding stools rule. One firm estimated that chemical and structural testing of one unit of a children's folding chair costs around $1,000 annually. Estimates provided by suppliers for other section 104 rulemakings indicate that around 40 to 50 percent of testing costs can be attributed to structural requirements, with the remaining 50 to 60 percent resulting from chemical testing (e.g., lead testing, to which they are already subject). If these percentages are applied to folding stools and chairs, the testing to structural components of the ASTM voluntary standard could cost about $400 to $500 per sample tested ($1,000 x .4 to $1,000 x .5), and are consistent with testing cost estimates for products with standards of similar complexity. Based on an examination of each small firm's revenues, staff did not find that testing, in addition to costs of redesign, would be economically significant for the majority of the small firms. For these reasons, the Commission certifies that the rule will not have a significant economic impact on a substantial number of small entities. X. Environmental Considerations The Commission's regulations address whether the agency is required to prepare an environmental assessment or an environmental impact statement. Under these regulations, a rule that has ``little or no potential for affecting the human environment,'' is categorically exempt from this requirement. 16 CFR 1021.5(c)(1). The final rule falls within the categorical exemption. XI. Paperwork Reduction Act This rule contains information collection requirements that are subject to public comment and review by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501- 3521). The preamble to the proposed rule discussed the information collection burden of the proposed rule. Section 7 of ASTM F2613-17a contains requirements for marking and labeling, that are disclosure requirements, thus falling within the definition of ``collections of information'' as defined in 44 U.S.C. 3502(3). OMB has assigned control number 3041-0172 to this information collection. The Commission did not receive any comments regarding the information collection burden of this proposal. Since the publication of the NPR, staff has determined that there are 13 known firms, rather than 14 firms supplying children's folding chairs to the U.S. market. All firms are assumed to use labels on both their products and their packaging already, but they might need to make some modifications to their existing labels. The estimated time required to make these modifications is about 1 hour per model. Each of these [[Page 59510]] firms supplies an average of 1.5 different models of children's folding chairs; therefore, the estimated burden hours associated with labels is 1 hour x 13 firms x 1.5 models per firm = 19.5 annual hours. XII. Preemption Section 26(a) of the CPSA, 15 U.S.C. 2075(a), provides that when a consumer product safety standard is in effect and applies to a product, no state or political subdivision of a state may either establish or continue in effect a requirement dealing with the same risk of injury unless the state requirement is identical to the federal standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply to the Commission for an exemption from this preemption under certain circumstances. Section 104(b) of the CPSIA refers to the rules to be issued under that section as ``consumer product safety rules.'' Therefore, the preemption provision of section 26(a) of the CPSA would apply to a rule issued under section 104. XIII. Amendment to 16 CFR Part 1112 To Include Notice of Requirements (NOR) for Children's Folding Chairs and Stools Standard Section 14(a) of the CPSA imposes the requirement that products subject to a consumer product safety rule under the CPSA, or to a similar rule, ban, standard, or regulation under any other Act enforced by the Commission, must be certified as complying with all applicable CPSC-enforced requirements. 15 U.S.C. 2063(a). Section 14(a)(2) of the CPSA requires that certification of children's products subject to a children's product safety rule be based on testing conducted by a CPSC- accepted, third party conformity assessment body. Section 14(a)(3) of the CPSA requires the Commission to publish a NOR for the accreditation of third party conformity assessment bodies (or laboratories) to assess conformity with a children's product safety rule to which a children's product is subject. The Standard Consumer Safety Specification for Children's Folding Chairs and Stools, to be codified at 16 CFR 1232, is a children's product safety rule that requires the issuance of an NOR. The Commission published a final rule, Requirements Pertaining to Third-Party Conformity Assessment Bodies, 78 FR 15836 (March 12, 2013), which is codified at 16 CFR part 1112 (referred to here as part 1112). This rule became effective on June 10, 2013. Part 1112 establishes requirements for accreditation of third-party conformity assessment bodies (or laboratories) to test for conformance with a children's product safety rule in accordance with section 14(a)(2) of the CPSA. Part 1112 also codifies a list of all of the NORs that the CPSC had published at the time part 1112 was issued. All NORs issued after the Commission published part 1112, such as the standard for children's folding chairs and stools, require the Commission to amend part 1112. Accordingly, the Commission is now amending part 1112 to include the standard for children's folding chairs and stools in the list of other children's product safety rules for which the CPSC has issued NORs. Laboratories applying for acceptance as a CPSC-accepted third-party conformity assessment body to test to the new standard for children's folding chairs and stools would be required to meet the third-party conformity assessment body accreditation requirements in 16 CFR part 1112, Requirements Pertaining to Third-Party Conformity Assessment Bodies. When a laboratory meets the requirements as a CPSC-accepted third-party conformity assessment body, the laboratory can apply to the CPSC to have 16 CFR part 1232, Standard Consumer Safety Specification for Children's Folding Chairs and Stools, included in its scope of accreditation of CPSC safety rules listed for the laboratory on the CPSC website at: www.cpsc.gov/labsearch. As required by the RFA, staff conducted a FRFA when the Commission issued the part 1112 rule (78 FR 15836, 15855-58). Briefly, the FRFA concluded that the accreditation requirements would not have a significant adverse impact on a substantial number of small test laboratories because no requirements were imposed on test laboratories that did not intend to provide third-party testing services. The only test laboratories that were expected to provide such services were those that anticipated receiving sufficient revenue from the mandated testing to justify accepting the requirements as a business decision. Moreover, a test laboratory would only choose to provide such services if it anticipated receiving revenues sufficient to cover the costs of the requirements. Based on similar reasoning, amending 16 CFR part 1112 to include the NOR for the folding chairs and stools standard will not have a significant adverse impact on small test laboratories. Moreover, based upon the number of test laboratories in the United States that have applied for CPSC acceptance of accreditation to test for conformance to other mandatory juvenile product standards, we expect that only a few test laboratories will seek CPSC acceptance of their accreditation to test for conformance with the children's folding chairs and stools standard. Most of these test laboratories will have already been accredited to test for conformity to other mandatory juvenile product standards, and the only costs to them would be the cost of adding the chidren's folding chairs and stools standard to their scope of accreditation. For these reasons, the Commission certifies that the NOR amending 16 CFR part 1112 to include the children's folding chairs and stools standard will not have a significant economic impact on a substantial number of small entities. List of Subjects 16 CFR Part 1112 Administrative practice and procedure, Audit, Consumer protection, Reporting and recordkeeping requirements, Third-party conformity assessment body. 16 CFR Part 1130 Administrative practice and procedure, Business and industry, Consumer protection, Reporting and recordkeeping requirements. 16 CFR Part 1232 Consumer protection, Imports, Incorporation by reference, Infants and children, Labeling, Law enforcement, and Toys. For the reasons discussed in the preamble, the Commission amends 16 CFR Chapter II as follows: PART 1112--REQUIREMENTS PERTAINING TO THIRD PARTY CONFORMITY ASSESSMENT BODIES 0 1. The authority citation for part 1112 continues to read as follows: Authority: Pub. L. 110-314, section 3, 122 Stat. 3016, 3017 (2008); 15 U.S.C. 2063. 0 2. Amend Sec. 1112.15 by adding paragraph (b)(43) to read as follows: Sec. 1112.15 When can a third party conformity assessment body apply for CPSC acceptance for a particular CPSC rule and/or test method? * * * * * (b) * * * (43) 16 CFR part 1232, Safety Standard for Children's Folding Chairs and Stools. * * * * * [[Page 59511]] PART 1130--REQUIREMENTS FOR CONSUMER REGISTRATION OF DURABLE INFANT OR TODDLER PRODUCTS 0 3. The authority citation for part 1130 continues to read as follows: Authority: 15 U.S.C. 2056a, 2065(b). 0 4. Amend Sec. 1130.2 by revising paragraph (a)(13) to read as follows: Sec. 1130.2 Definitions. * * * * * (a) * * * (13) Children's folding chairs and stools; * * * * * 0 5. Add part 1232 to read as follows: PART 1232--SAFETY STANDARD FOR CHILDREN'S FOLDING CHAIRS AND STOOLS Sec. 1232.1 Scope. 1232.2 Requirements for children's folding chairs and stools. Authority: Sec. 104, Pub. L. 110-314, 122 Stat. 3016 (August 14, 2008); Pub. L. 112-28, 125 Stat. 273 (August 12, 2011). Sec. 1232.1 Scope. This part establishes a consumer product safety standard for children's folding chairs and stools. Sec. 1232.2 Requirements for children's folding chairs and stools. (a) Each children's folding chair and stool shall comply with all applicable provisions of ASTM F2613-17a, Standard Consumer Safety Specification for Children's Chairs and Stools, approved on October 1, 2017. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from ASTM International, 100 Bar Harbor Drive, P.O. Box 0700, West Conshohocken, PA 19428; http://www.astm.org. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html. (b) [Reserved] Alberta E. Mills, Acting Secretary, Consumer Product Safety Commission. [FR Doc. 2017-26997 Filed 12-14-17; 8:45 am] BILLING CODE 6355-01-P
![59505
Rules and Regulations Federal Register
Vol. 82, No. 240
Friday, December 15, 2017
This section of the FEDERAL REGISTER and Field Operations, U.S. Consumer of this preamble. The current version of
contains regulatory documents having general Product Safety Commission; 4330 East the standard is ASTM F2613–17a.
applicability and legal effect, most of which West Highway, Bethesda, MD 20814; In this document, the Commission is
are keyed to and codified in the Code of email: kwalker@cpsc.gov; telephone: issuing a mandatory safety standard that
Federal Regulations, which is published under (301) 504–6820. incorporates by reference the most
50 titles pursuant to 44 U.S.C. 1510.
recent voluntary standard, developed by
SUPPLEMENTARY INFORMATION:
The Code of Federal Regulations is sold by ASTM International, ASTM F2613–17a,
the Superintendent of Documents. I. Background and Statutory Authority for children’s folding chairs and stools.
The mandatory standard does not
The CPSIA was enacted on August 14, include non-folding chairs and stools.
CONSUMER PRODUCT SAFETY 2008. Section 104(b) of the CPSIA, part The Commission is not making any
COMMISSION of the Danny Keysar Child Product other modifications to the ASTM
Safety Notification Act, requires the standard. As required by section
16 CFR Parts 1112, 1130, and 1232 Commission to: (1) Examine and assess 104(b)(1)(A), the Commission consulted
[Docket No. CPSC–2015–0029] the effectiveness of voluntary consumer with manufacturers, retailers, trade
product safety standards for durable organizations, laboratories, consumer
Safety Standard for Children’s Folding infant or toddler products, in advocacy groups, consultants, and the
Chairs and Stools consultation with representatives of public to develop the standard, largely
consumer groups, juvenile product through the ASTM process. In addition,
AGENCY: Consumer Product Safety manufacturers, and independent child
Commission. as required by section 14 of the
product engineers and experts; and (2) Consumer Product Safety Act (CPSA),
ACTION: Final rule. promulgate consumer product safety the final rule amends the list of NORs
SUMMARY: The Danny Keysar Child standards for durable infant or toddler issued by the Commission in 16 CFR
Product Safety Notification Act, section products. Standards issued under part 1112 to include the standard for
104 of the Consumer Product Safety section 104 are to be ‘‘substantially the children’s folding chairs and stools. The
Improvement Act of 2008 (CPSIA), same as’’ the applicable voluntary final rule also amends the product
requires the United States Consumer standards or more stringent than the registration rule in 16 CFR part 1130 to
Product Safety Commission voluntary standard if the Commission identify children’s folding stools, in
(Commission or CPSC) to promulgate concludes that more stringent addition to children’s folding chairs, as
consumer product safety standards for requirements would further reduce the a durable infant or toddler product for
durable infant or toddler products. risk of injury associated with the purposes of consumer product
These standards are to be ‘‘substantially product. registration requirements.
the same as’’ applicable voluntary On October 19, 2015, the Commission
standards, or more stringent than the II. Product Description
issued a notice of proposed rulemaking
voluntary standard if the Commission (NPR) for children’s folding chairs and The current voluntary standard,
concludes that more stringent stools. 80 FR 63155. The NPR proposed ASTM F2613–17a, describes a
requirements would further reduce the to incorporate by reference the children’s folding chair or stool as
risk of injury associated with the voluntary standard that was in effect at seating furniture with a seat height of 15
product. The Commission is issuing a that time, ASTM F2613–14, Standard inches or less with a rigid frame that is
safety standard for children’s folding Consumer Safety Specification for intended to be used as a support for the
chairs and stools in response to the Children’s Chairs and Stools. ASTM body, limbs, or feet of a child when
direction under Section 104(b) of the F2613–14 contained testing and sitting or resting in an upright or
CPSIA. In addition, the Commission is performance requirements for any chair reclining position, can be folded for
amending its regulations regarding third or stool used by a single child who can transport or storage, and may include a
party conformity assessment bodies to get in and get out of the product rocking base. The product is intended to
include the safety standard for unassisted and with a seat height 15 be used by a single child who can get
children’s folding chairs and stools in inches or less with or without a rocking out of the chair unassisted.
the list of Notices of Requirements base. The NPR proposed to limit the ASTM F26132–17a also includes a
(NORs) issued by the Commission. scope of the mandatory standard to definition for ‘‘chairs with side
Finally, the Commission is amending its folding chairs and stools because the containment’’ to describe ‘‘a children’s
regulations establishing requirements hazards presented by folding chairs and chair or folding chair with armrests or
for consumer registration of durable stools are different from non-folding otherwise designed in a shape which
infant or toddler products to identify chairs and stools. In addition, the NPR provides barriers in the vertical
children’s folding stools as a durable proposed to change the stability test direction above the seating surface to
infant or toddler product. method to add a new performance the occupant’s left and right which can
nshattuck on DSK9F9SC42PROD with RULES
DATES: This rule will become effective requirement and test method to address act like arms or other side structures.’’
June 15, 2018. The incorporation by sideways stability incidents in addition Other definitions remain unchanged
reference of the publication listed in to rearwards stability incidents, and to from ASTMF2613–14. A ‘‘children’s
this rule is approved by the Director of revise the marking and labeling chair’’ is defined as ‘‘seating furniture
the Federal Register as of June 15, 2018. sections. Since the NPR was issued, with a rigid frame that is intended to be
FOR FURTHER INFORMATION CONTACT: ASTM has revised ASTM F2613–14 used as a support for the body, limbs,
Keysha Walker, Office of Compliance several times, as discussed in section V or feet of a child when sitting or resting
VerDate Sep<11>2014 15:15 Dec 14, 2017 Jkt 244001 PO 00000 Frm 00001 Fmt 4700 Sfmt 4700 E:\FR\FM\15DER1.SGM 15DER1](https://thefederalregister.org/doc/82_FR_59745/page/1.svg)
![Federal Register / Vol. 82, No. 240 / Friday, December 15, 2017 / Rules and Regulations 59511
PART 1130—REQUIREMENTS FOR DEPARTMENT OF HOMELAND (DHS) Appropriations Act of 2004 (Pub.
CONSUMER REGISTRATION OF SECURITY L. 108–90).
DURABLE INFANT OR TODDLER Section 482 of the Homeland Security
PRODUCTS U.S. Customs and Border Protection Act replaced section 559 of Title V of
Division F of the Consolidated
■ 3. The authority citation for part 1130 DEPARTMENT OF THE TREASURY Appropriations Act, 2014 (Pub. L. 113–
continues to read as follows: 76) and permits CBP, in consultation
Authority: 15 U.S.C. 2056a, 2065(b). 19 CFR Part 133 with the General Services
Administration (GSA), to ‘‘enter into an
■ 4. Amend § 1130.2 by revising [USCBP–2016–0076; CBP Dec. 17–21] agreement with any entity to accept a
paragraph (a)(13) to read as follows: donation of personal property, money or
RIN 1515–AE21
§ 1130.2 Definitions. nonpersonal services’’ to be used for
Donations of Technology and Related certain CBP activities at most ports of
* * * * *
Support Services To Enforce entry where CBP performs inspection
(a) * * *
Intellectual Property Rights services. Pursuant to section 482(c)(3),
(13) Children’s folding chairs and
CBP in consultation with GSA will
stools; AGENCY: U.S. Customs and Border establish criteria for evaluating donation
* * * * * Protection, Department of Homeland proposals under section 482 and make
■ 5. Add part 1232 to read as follows: Security; Department of the Treasury. such criteria publicly available.
ACTION: Final rule. If donations cannot be accepted under
PART 1232—SAFETY STANDARD FOR section 482, they may be accepted under
CHILDREN’S FOLDING CHAIRS AND SUMMARY: This document amends the section 507 of the DHS Appropriations
STOOLS U.S. Customs and Border Protection Act of 2004. Section 507 made the DHS
(CBP) regulations relating to the Gifts and Donations account ‘‘available
Sec. enforcement of intellectual property
1232.1 Scope.
to the Department of Homeland Security
1232.2 Requirements for children’s folding
rights. This final rule implements . . . for the Secretary of Homeland
chairs and stools. section 308(d) of the Trade Facilitation Security to accept, hold, administer and
and Trade Enforcement Act of 2015 utilize gifts and bequests, including
Authority: Sec. 104, Pub. L. 110–314, 122 (TFTEA), which requires CBP to property to facilitate the work of the
Stat. 3016 (August 14, 2008); Pub. L. 112–28,
125 Stat. 273 (August 12, 2011).
prescribe regulatory procedures for the Department of Homeland Security.’’
donation of technologies, training, or Title V, Public Law 108–90, 117 Stat.
§ 1232.1 Scope. other related services for the purpose of 1153–1154. DHS policy on the
This part establishes a consumer assisting CBP in intellectual property acceptance of gifts pursuant to section
product safety standard for children’s enforcement. 507 is contained in DHS Directive 112–
folding chairs and stools. DATES: Effective January 16, 2018. 02 and DHS Instruction 112–02–001.
The Secretary of DHS delegated the
§ 1232.2 Requirements for children’s FOR FURTHER INFORMATION CONTACT:
authority to accept and utilize gifts to
folding chairs and stools. Garrett D. Wright, Chief, Donations the heads of certain DHS components,
(a) Each children’s folding chair and Acceptance Program, Office of Field including the Commissioner of CBP, in
stool shall comply with all applicable Operations, U.S. Customs and Border DHS Delegation 0006.
provisions of ASTM F2613–17a, Protection, telephone (202) 344–2344. This document implements section
Standard Consumer Safety SUPPLEMENTARY INFORMATION: 308(d) of the TFTEA by promulgating a
Specification for Children’s Chairs and Background new subpart H to part 133 of title 19 of
Stools, approved on October 1, 2017. the Code of Federal Regulations (CFR)
The Director of the Federal Register The Trade Facilitation and Trade which provides for the receipt and
approves this incorporation by reference Enforcement Act of 2015 (TFTEA), acceptance by CBP of donations of
in accordance with 5 U.S.C. 552(a) and Public Law 114–125, 130 Stat. 122 (19 hardware, software, equipment, and
1 CFR part 51. You may obtain a copy U.S.C. 4301 note), was enacted on similar technologies, as well as training
from ASTM International, 100 Bar February 24, 2016, and includes several and related support services, for the
Harbor Drive, P.O. Box 0700, West provisions regarding trade facilitation purpose of assisting CBP in enforcing
Conshohocken, PA 19428; http:// and trade enforcement, some of which IPR. New subpart H, as set forth in
www.astm.org. You may inspect a copy deal with improving U.S. Customs and § 133.61, prescribes the methods by
at the Office of the Secretary, U.S. Border Protection’s (CBP’s) intellectual which donations of IPR technology and
Consumer Product Safety Commission, property rights (IPR) enforcement at the related support services may be made.
Room 820, 4330 East West Highway, border. Section 308(d) of the TFTEA Specifically, 19 CFR 133.61(a) sets forth
Bethesda, MD 20814, telephone 301– requires the Commissioner of CBP to the scope of this section and identifies
504–7923, or at the National Archives prescribe regulations to enable CBP to the authority to accept donations,
and Records Administration (NARA). receive donations of hardware, software, § 133.61(b) describes the donation
For information on the availability of equipment, and similar technologies, process, and § 133.61(c) lays out the
this material at NARA, call 202–741– and to accept training and other support elements of the written donation
6030, or go to: http://www.archives.gov/ services, from private sector entities, for agreement.
federal-register/cfr/ibr-locations.html. the purpose of enforcing IPR. On January 17, 2017, CBP published
nshattuck on DSK9F9SC42PROD with RULES
(b) [Reserved] Acceptance of such donations must a Notice of Proposed Rulemaking
also be consistent with either section (NPRM) in the Federal Register (82 FR
Alberta E. Mills, 482 of the Homeland Security Act of 4800) proposing to amend its
Acting Secretary, Consumer Product Safety 2002, as amended by section 2 of the regulations pertaining to the
Commission. Cross-Border Trade Enhancement Act of enforcement of intellectual property
[FR Doc. 2017–26997 Filed 12–14–17; 8:45 am] 2016 (Pub. L. 114–279), or section 507 rights in order to enhance CBP’s
BILLING CODE 6355–01–P of the Department of Homeland Security intellectual property rights enforcement
VerDate Sep<11>2014 15:15 Dec 14, 2017 Jkt 244001 PO 00000 Frm 00007 Fmt 4700 Sfmt 4700 E:\FR\FM\15DER1.SGM 15DER1](https://thefederalregister.org/doc/82_FR_59745/page/7.svg)
Document Created: 2017-12-15 03:37:41
Document Modified: 2017-12-15 03:37:41
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Rules and Regulations | |
| Action | Final rule. | |
| Dates | This rule will become effective June 15, 2018. The incorporation by reference of the publication listed in this rule is approved by the Director of the Federal Register as of June 15, 2018. | |
| Contact | Keysha Walker, Office of Compliance and Field Operations, U.S. Consumer Product Safety Commission; 4330 East West Highway, Bethesda, MD 20814; email: [email protected]; telephone: (301) 504-6820. | |
| FR Citation | 82 FR 59505 | |
| CFR Citation | 16
CFR
1112 16 CFR 1130 16 CFR 1232 | |
| CFR Associated | Administrative Practice and Procedure; Audit; Consumer Protection; Reporting and Recordkeeping Requirements; Third-Party Conformity Assessment Body; Business and Industry; Imports; Incorporation by Reference; Infants and Children; Labeling; Law Enforcement and Toys |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR