83_FR_10887 83 FR 10838 - Foreign-Trade Zone (FTZ) 61-San Juan, Puerto Rico; Notification of Proposed Production Activity, Janssen Ortho LLC (Pharmaceuticals), Gurabo, Puerto Rico

83 FR 10838 - Foreign-Trade Zone (FTZ) 61-San Juan, Puerto Rico; Notification of Proposed Production Activity, Janssen Ortho LLC (Pharmaceuticals), Gurabo, Puerto Rico

DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board

Federal Register Volume 83, Issue 49 (March 13, 2018)

Page Range10838-10839
FR Document2018-05025

Federal Register, Volume 83 Issue 49 (Tuesday, March 13, 2018) 
[Federal Register Volume 83, Number 49 (Tuesday, March 13, 2018)]
[Notices]
[Pages 10838-10839]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2018-05025]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-16-2018]


Foreign-Trade Zone (FTZ) 61--San Juan, Puerto Rico; Notification 
of Proposed Production Activity, Janssen Ortho LLC (Pharmaceuticals), 
Gurabo, Puerto Rico

    Janssen Ortho LLC (Janssen) submitted a notification of proposed 
production activity to the FTZ Board for its facility in Gurabo, Puerto 
Rico. The notification conforming to the requirements of the 
regulations of the FTZ Board (15 CFR 400.22) was received on February 
27, 2018.
    Janssen already has authority to produce certain pharmaceutical 
products within Subzone 61N. The current request would add a finished 
product and a foreign status material/component to the scope of 
authority. Pursuant to 15 CFR 400.14(b), additional FTZ authority would 
be limited to the specific foreign-status material/component and 
specific finished product described in the submitted notification (as 
described below) and subsequently authorized by the FTZ Board.
    Production under FTZ procedures could exempt Janssen from customs 
duty payments on the foreign-status material/component used in export 
production. On its domestic sales, for the foreign-status material/
component noted below and those in the existing scope of authority, 
Janssen would be able to choose the duty rate during customs entry 
procedures that applies to ErleadaTM (apalutamide 60 mg oral 
tablets) (duty-free). Janssen would be able to avoid duty on foreign-
status components which becomes scrap/waste. Customs duties also could 
possibly be deferred or reduced on foreign-status production equipment.
    The material/component sourced from abroad is apalutamide API (duty 
rate 6.5%).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary at the address 
below. The closing period for their receipt is April 23, 2018.

[[Page 10839]]

    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
Board's website, which is accessible via www.trade.gov/ftz.
    For further information, contact Christopher Wedderburn at 
[email protected] or (202) 482-1963.

    Dated: March 6, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018-05025 Filed 3-12-18; 8:45 am]
 BILLING CODE 3510-DS-P

10838 Federal Register / Vol. 83, No. 49 / Tuesday, March 13, 2018 / Notices (10) working days before the scheduled SUPPLEMENTARY INFORMATION: Members Adjournment date of the meeting. of the public can listen to the Dated: March 7, 2018. Records and documents discussed discussion. This meeting is available to David Mussatt, during the meeting will be available for the public through the following toll- Supervisory Chief, Regional Programs Unit. public viewing as they become available free call-in number: 877–879–6207, at https://facadatabase.gov/committee/ [FR Doc. 2018–04976 Filed 3–12–18; 8:45 am] conference ID: 2611734. Any interested committee.aspx?cid=259&aid=17 and member of the public may call this BILLING CODE P clicking on the ‘‘Meeting Details’’ and number and listen to the meeting. An ‘‘Documents’’ links. Records generated open comment period will be provided from this meeting may also be inspected to allow members of the public to make DEPARTMENT OF COMMERCE and reproduced at the Western Regional a statement as time allows. The Office, as they become available, both conference call operator will ask callers Foreign-Trade Zones Board before and after the meeting. Persons to identify themselves, the organization interested in the work of this advisory they are affiliated with (if any), and an [B–16–2018] committee are advised to go to the email address prior to placing callers Commission’s website, www.usccr.gov, into the conference room. Callers can Foreign-Trade Zone (FTZ) 61—San or to contact the Western Regional expect to incur regular charges for calls Juan, Puerto Rico; Notification of Office at the above phone number, email they initiate over wireless lines, Proposed Production Activity, Janssen or street address. according to their wireless plan. The Ortho LLC (Pharmaceuticals), Gurabo, Commission will not refund any Puerto Rico Agenda incurred charges. Callers will incur no Janssen Ortho LLC (Janssen) Smudging Ceremony charge for calls they initiate over land- submitted a notification of proposed Welcome and Introductions: line connections to the toll-free Gwen Kircher, Chair, Montana production activity to the FTZ Board for telephone number. Persons with hearing its facility in Gurabo, Puerto Rico. The Advisory Committee impairments may also follow the Community Forum notification conforming to the proceedings by first calling the Federal requirements of the regulations of the Montana Advisory Committee Relay Service at 1–800–977–8339 and FTZ Board (15 CFR 400.22) was Government and Tribal Officials, providing the Service with the received on February 27, 2018. Advocates, Experts conference call number and conference Janssen already has authority to Dated: March 7, 2018. ID number. produce certain pharmaceutical David Mussatt, Members of the public are also products within Subzone 61N. The Supervisory Chief, Regional Programs Unit. entitled to submit written comments; current request would add a finished [FR Doc. 2018–04978 Filed 3–12–18; 8:45 am] the comments must be received in the product and a foreign status material/ BILLING CODE 6335–01–P regional office within 30 days following component to the scope of authority. the meeting. Written comments may be Pursuant to 15 CFR 400.14(b), mailed to the Midwestern Regional additional FTZ authority would be COMMISSION ON CIVIL RIGHTS Office, U.S. Commission on Civil Rights, limited to the specific foreign-status 55 W. Monroe St., Suite 410, Chicago, material/component and specific Notice of Public Meeting of the IL 60615. They may also be faxed to the finished product described in the Alabama Advisory Committee To Commission at (312) 353–8324, or submitted notification (as described Discuss the Hearing on Access to emailed to David Barreras at dbarreras@ below) and subsequently authorized by Voting in the State of Alabama, Which usccr.gov. Persons who desire the FTZ Board. Was Held in Montgomery, Alabama on additional information may contact the Production under FTZ procedures February 22, 2018 Midwestern Regional Office at (312) could exempt Janssen from customs AGENCY: U.S. Commission on Civil 353–8311. duty payments on the foreign-status Records generated from this meeting Rights. material/component used in export may be inspected and reproduced at the ACTION: Announcement of meeting. production. On its domestic sales, for Midwestern Regional Office, as they the foreign-status material/component SUMMARY: Notice is hereby given, become available, both before and after noted below and those in the existing pursuant to the provisions of the rules the meeting. Records of the meeting will scope of authority, Janssen would be and regulations of the U.S. Commission be available via www.facadatabase.gov able to choose the duty rate during on Civil Rights (Commission) and the under the Commission on Civil Rights, customs entry procedures that applies to Federal Advisory Committee Act that Alabama Advisory Committee link ErleadaTM (apalutamide 60 mg oral the Alabama Advisory Committee (http://www.facadatabase.gov/ tablets) (duty-free). Janssen would be (Committee) will hold a meeting on committee/committee.aspx?cid able to avoid duty on foreign-status Friday, March 23, 2018, at 11:00 a.m. =233&aid=17). Persons interested in the components which becomes scrap/ (Central) for the purpose discussing the work of this Committee are directed to waste. Customs duties also could hearing on Access to Voting in Alabama, the Commission’s website, http:// possibly be deferred or reduced on and assessment of the need for further www.usccr.gov, or may contact the foreign-status production equipment. testimony. Midwestern Regional Office at the above The material/component sourced DATES: The meeting will be held on email or street address. from abroad is apalutamide API (duty amozie on DSK30RV082PROD with NOTICES Friday, March 23, 2018, at 11:00 a.m. Agenda rate 6.5%). (Central). Welcome and Roll Call Public comment is invited from Public Call Information: Dial: 877– Discussion of the hearing on Access to interested parties. Submissions shall be 879–6207, Conference ID: 2611734. Voting in Alabama addressed to the Board’s Executive FOR FURTHER INFORMATION CONTACT: Discussion on additional testimony Secretary at the address below. The David Barreras, DFO, at dbarreras@ Next Steps closing period for their receipt is April usccr.gov or 312–353–8311. Public Comment 23, 2018. VerDate Sep<11>2014 17:47 Mar 12, 2018 Jkt 244001 PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 E:\FR\FM\13MRN1.SGM 13MRN1

Federal Register / Vol. 83, No. 49 / Tuesday, March 13, 2018 / Notices 10839 A copy of the notification will be A copy of the application will be with respect to one company, Filmag. available for public inspection at the available for public inspection at the On October 31, 2017, Commerce Office of the Executive Secretary, Office of the Executive Secretary, extended the preliminary results of Foreign-Trade Zones Board, Room Foreign-Trade Zones Board, Room review until January 2, 2018.2 On 21013, U.S. Department of Commerce, 21013, U.S. Department of Commerce, December 28, 2017, Commerce extended 1401 Constitution Avenue NW, 1401 Constitution Avenue NW, the preliminary results of review until Washington, DC 20230–0002, and in the Washington, DC 20230–0002, and in the February 28, 2018.3 ‘‘Reading Room’’ section of the Board’s ‘‘Reading Room’’ section of the Board’s Commerce exercised its discretion to website, which is accessible via website, which is accessible via toll all deadlines affected by the closure www.trade.gov/ftz. www.trade.gov/ftz. of the Federal Government from January For further information, contact For further information, contact 20 through 22, 2018. If the new deadline Christopher Wedderburn at Elizabeth Whiteman at falls on a non-business day, in Chris.Wedderburn@trade.gov or (202) Elizabeth.Whiteman@trade.gov or (202) accordance with Commerce’s practice, 482–1963. 482–0473. the deadline will become the next Dated: March 6, 2018. Dated: March 7, 2018. business day. The revised deadline for Andrew McGilvray, the final results of this review is now Andrew McGilvray, Executive Secretary. March 5, 2018.4 Executive Secretary. [FR Doc. 2018–05025 Filed 3–12–18; 8:45 am] [FR Doc. 2018–05024 Filed 3–12–18; 8:45 am] Scope of the Order BILLING CODE 3510–DS–P BILLING CODE 3510–DS–P The merchandise covered by the order is certain stainless steel butt-weld pipe fittings from Italy.5 Stainless steel butt- DEPARTMENT OF COMMERCE DEPARTMENT OF COMMERCE weld pipe fittings are under 14 inches Foreign-Trade Zones Board in outside diameter (based on nominal International Trade Administration pipe size), whether finished or [S–45–2018] [A–475–828] unfinished. The product encompasses all grades of stainless steel and Foreign-Trade Zone 138—Franklin Stainless Steel Butt-Weld Pipe Fittings ‘‘commodity’’ and ‘‘specialty’’ fittings. County, Ohio; Application for From Italy: Preliminary Results of Specifically excluded from the Subzone; International Converter, Inc., Antidumping Duty Administrative definition are threaded, grooved, and Caldwell, Ohio Review; 2016–2017 bolted fittings, and fittings made from An application has been submitted to any material other than stainless steel. AGENCY: Enforcement and Compliance, The butt-weld fittings subject to the the Foreign-Trade Zones Board (the International Trade Administration, Board) by the Columbus Regional order are currently classifiable under Department of Commerce. subheading 7307.23.0000 of the Airport Authority, grantee of FTZ 138, SUMMARY: The Department of Commerce requesting subzone status for the facility Harmonized Tariff Schedule of the (Commerce) preliminarily determines of International Converter, Inc. (IC), United States (HTSUS). Although the that sales of subject merchandise by located in Caldwell, Ohio. The HTSUS subheading is provided for Filmag Italia Spa (Filmag) were not application was submitted pursuant to convenience and customs purposes, the made at less than normal value during the provisions of the Foreign-Trade written description of the scope of the the period of review (POR) February 1, Zones Act, as amended (19 U.S.C. 81a– order is dispositive. A full description 2016, through January 31, 2017. 81u), and the regulations of the Board of the scope of the order is contained in Interested parties are invited to (15 CFR part 400). It was formally the memorandum from Christian Marsh, comment on these preliminary results. docketed on March 7, 2018. Deputy Assistant Secretary for The proposed subzone (10.29 acres) is DATES: Applicable March 13, 2018. located at 17153 Industrial Highway, FOR FURTHER INFORMATION CONTACT: John 2 See Memorandum to James Maeder, Senior Caldwell, Noble County. A notification Drury or Kent Boydston, AD/CVD Director performing the duties of Deputy Assistant Operations, Office VI, Enforcement and Secretary for Antidumping and Countervailing Duty of proposed production activity has Operations, from John K. Drury, International Trade been submitted and is being processed Compliance, International Trade Compliance Analyst, Office VI, ‘‘Stainless Steel under 15 CFR 400.37 (Doc. B–13–2018). Administration, U.S. Department of Butt-Weld Pipe Fittings from Italy: Extension of The proposed subzone would be subject Commerce, 1401 Constitution Avenue Deadline for Preliminary Results of Antidumping NW, Washington, DC 20230; telephone: Duty Administrative Review; 2016–2017,’’ dated to the existing activation limit of FTZ October 31, 2017. 138. (202) 482–0195 or (202) 482–5649, 3 See Memorandum to Edward Yang, Senior In accordance with the Board’s respectively. Director, Office VII, from Kent Boydston, regulations, Elizabeth Whiteman of the SUPPLEMENTARY INFORMATION: International Trade Compliance Analyst, Office VI, FTZ Staff is designated examiner to ‘‘Stainless Steel Butt-Weld Pipe Fittings from Italy: review the application and make Background Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review; 2016– recommendations to the Executive On April 10, 2017, Commerce 2017,’’ dated December 28, 2017. Secretary. published in the Federal Register the 4 See Memorandum for The Record from Public comment is invited from notice of initiation of an administrative Christian Marsh, Deputy Assistant Secretary for interested parties. Submissions shall be review of the AD order on stainless steel Enforcement and Compliance, performing the non- addressed to the Board’s Executive exclusive functions and duties of the Assistant butt-weld pipe fittings (SSBW pipe Secretary for Enforcement and Compliance, amozie on DSK30RV082PROD with NOTICES Secretary at the address below. The ‘‘Deadlines Affected by the Shutdown of the fittings) from Italy for the period closing period for their receipt is April Federal Government’’ (Tolling Memorandum), February 1, 2016, through January 31, 23, 2018. Rebuttal comments in dated January 23, 2018. All deadlines in this 2017.1 Commerce initiated a review segment of the proceeding have been extended by response to material submitted during 3 days. the foregoing period may be submitted 1 See Initiation of Antidumping and 5 See Antidumping Duty Orders: Stainless Steel during the subsequent 15-day period to Countervailing Duty Administrative Reviews, 82 FR Butt-Weld Pipe Fittings from Italy, Malaysia, and May 7, 2018. 17188 (April 10, 2017). the Philippines, 66 FR 11257 (February 23, 2001). VerDate Sep<11>2014 17:47 Mar 12, 2018 Jkt 244001 PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 E:\FR\FM\13MRN1.SGM 13MRN1


Document Created: 2018-03-13 01:57:11
Document Modified: 2018-03-13 01:57:11
CategoryRegulatory Information
CollectionFederal Register
sudoc ClassAE 2.7:
GS 4.107:
AE 2.106:
PublisherOffice of the Federal Register, National Archives and Records Administration
SectionNotices
FR Citation83 FR 10838 
2024 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR