| Page Range | 46914-46915 | |
| FR Document | 2018-20071 |
[Federal Register Volume 83, Number 180 (Monday, September 17, 2018)] [Notices] [Pages 46914-46915] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2018-20071] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE International Trade Administration [A-570-865] Certain Hot-Rolled Carbon Steel Flat Products From the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2016-2017 AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) is conducting an administrative review of the antidumping duty order on certain hot- rolled carbon steel flat products (hot-rolled steel) from the People's Republic of China (China), covering the period of review (POR) November 1, 2016, through October 31, 2017. DATES: Applicable September 17, 2018. FOR FURTHER INFORMATION CONTACT: Benito Ballesteros, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: 202.482.7425. SUPPLEMENTARY INFORMATION: Background On July 2, 2018, Commerce published the Preliminary Results of the administrative review of hot-rolled steel from China.\1\ We invited parties to submit comments on the Preliminary Results, but we received no comments. Commerce conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act). --------------------------------------------------------------------------- \1\ See Certain Hot-Rolled Carbon Steel Flat Products from the People's Republic of China: Preliminary Results of Antidumping Duty Administrative Review; 2016-2017, 83 FR 30912 (July 2, 2018) (Preliminary Results). --------------------------------------------------------------------------- Scope of the Order The products covered by the order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1,250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order. Specifically included within the scope of the order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum. Steel products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is two percent or less, by weight; and, (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 2.25 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.15 percent of vanadium, or 0.15 percent of zirconium. All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, for example, are outside or specifically excluded from the scope of the order:Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506). Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher. Ball bearing steels, as defined in the HTSUS. Tool steels, as defined in the HTSUS. Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent. ASTM specifications A710 and A736. USS abrasion-resistant steels (USS AR 400, USS AR 500). All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507). Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS. The merchandise subject to the order is classified in the HTSUS at subheadings: 7208.10.1500, 7208.10.3000, 7208.10.6000, 7208.25.3000, 7208.25.6000, 7208.26.0030, 7208.26.0060, 7208.27.0030, 7208.27.0060, 7208.36.0030, 7208.36.0060, 7208.37.0030, 7208.37.0060, 7208.38.0015, 7208.38.0030, 7208.38.0090, 7208.39.0015, 7208.39.0030, 7208.39.0090, 7208.40.6030, 7208.40.6060, 7208.53.0000, 7208.54.0000, 7208.90.0000, 7211.14.0090, 7211.19.1500, 7211.19.2000, 7211.19.3000, 7211.19.4500, 7211.19.6000, 7211.19.7530, 7211.19.7560, and 7211.19.7590. Certain hot-rolled carbon steel flat products covered by the order, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.0000, 7225.19.0000, 7225.30.3050, 7225.30.7000, 7225.40.7000, 7225.99.0090, 7226.11.1000, 7226.11.9030, 7226.11.9060, 7226.19.1000, 7226.19.9000, 7226.91.5000, 7226.91.7000, 7226.91.8000, and 7226.99.0000. Subject merchandise may also enter under 7210.70.3000, 7210.90.9000, 7211.14.0030, 7212.40.1000, 7212.40.5000, and 7212.50.0000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to the order is dispositive. Analysis of Comments Received As noted above, we received no comments on the Preliminary Results. [[Page 46915]] Changes Since the Preliminary Results As no parties submitted comments on the Preliminary Results, Commerce has not modified its analysis from that presented in the Preliminary Results, and no decision memorandum accompanies this Federal Register notice. Further, Commerce has made no changes and continues to find that Baosteel Group Corporation, Shanghai Baosteel International Economic & Trading Co., Ltd., Baoshan Iron and Steel Co., Ltd. (collectively, Baosteel),\2\ Shanghai Meishan Iron & Steel, and Union Steel China (collectively, companies under review) have not demonstrated that they are separate from the China-wide entity. Because no review was requested of the China-wide entity, the pre-existing China-wide rate of 90.83 percent will apply to entries of their subject merchandise into the United States during the POR. --------------------------------------------------------------------------- \2\ Because no party is challenging the prior collapsing determination, we continue to collapse Baosteel Group Corporation, Shanghai Baosteel International Economic & Trading Co., Ltd., and Baoshan Iron and Steel Co., Ltd. (collectively, Baosteel). See Certain Hot-Rolled Carbon Steel Flat Products from the People's Republic of China: Final No Shipments Determination of Antidumping Duty Administrative Review; 2012-2013; 79 FR 67415 (November 13, 2014). --------------------------------------------------------------------------- Assessment Rates We have not calculated any assessment (or cash deposit) rates in this administrative review, because none of the companies under review qualified for a separate rate. Commerce intends to issue assessment instructions to CBP 15 days after the publication date of the final results of this administrative review. Cash Deposit Requirements The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise from China entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided by section 751(a)(2)(C) of the Act: (1) For Baosteel, Shanghai Meishan Iron & Steel, and Union Steel China, which did not qualify for separate rate, the cash deposit rate will be China-wide rate of 90.83 percent; (2) for previously investigated or reviewed Chinese and non- Chinese exporters not listed above that have separate rates, the cash deposit rate will continue to be the exporter-specific rate published for the most recent period; (3) for all Chinese exporters of subject merchandise which have not been found to be entitled to a separate rate, the cash deposit rate will be the China-wide rate of 90.83 percent; and (4) for all non-Chinese exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to Chinese exporter(s) that supplied that non- Chinese exporter. These deposit requirements, when imposed, shall remain in effect until further notice. Disclosure Normally, Commerce discloses to interested parties the calculations performed in connection with the final results within five days of its public announcement, or if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b). However, because the companies under review are part of the China-wide entity, there are no calculations to disclose. Notification to Importers This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. Administrative Protective Order This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under the APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a violation subject to sanction. Notification to Interested Parties We are issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.213(h) and 351.221(b)(5). Dated: September 10, 2018. James Maeder, Associate Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations performing the duties of Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2018-20071 Filed 9-14-18; 8:45 am] BILLING CODE 3510-DS-P
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Dates | Applicable September 17, 2018. | |
| Contact | Benito Ballesteros, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: 202.482.7425. | |
| FR Citation | 83 FR 46914 |