83 FR 55691 - Foreign-Trade Zone 287-Tunica County, Mississippi Application for Subzone Future Electronics Distribution Center, L.P., Southaven, Mississippi
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board Federal Register Volume 83, Issue 216 (November 7, 2018)
Foreign-Trade Zones Board
Federal Register Volume 83, Issue 216 (November 7, 2018)
| Page Range | 55691-55691 | |
| FR Document | 2018-24338 |
[Federal Register Volume 83, Number 216 (Wednesday, November 7, 2018)] [Notices] [Page 55691] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2018-24338] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [S-185-2018] Foreign-Trade Zone 287--Tunica County, Mississippi Application for Subzone Future Electronics Distribution Center, L.P., Southaven, Mississippi An application has been submitted to the Foreign-Trade Zones (FTZ) Board by Tunica County, grantee of FTZ 287, requesting subzone status for the facilities of Future Electronics Distribution Center, L.P., located in Southaven, Mississippi. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on October 30, 2018. The proposed subzone (51.036 acres) is located at 4150 Old Airways Boulevard, Southaven, Desoto County. No authorization for production activity has been requested at this time. The proposed subzone would be subject to the existing activation limit of FTZ 287. In accordance with the FTZ Board's regulations, Qahira El-Amin of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board's Executive Secretary at the address below. The closing period for their receipt is December 17, 2018. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to January 2, 2019. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230-0002, and in the ``Reading Room'' section of the FTZ Board's website, which is accessible via www.trade.gov/ftz. For further information, contact Qahira El-Amin at [email protected] or (202) 482-5928. Dated: October 31, 2018. Andrew McGilvray, Executive Secretary. [FR Doc. 2018-24338 Filed 11-6-18; 8:45 am] BILLING CODE 3510-DS-P
![Federal Register / Vol. 83, No. 216 / Wednesday, November 7, 2018 / Notices 55691
subsequently authorized by the FTZ Customs duties also could possibly be DEPARTMENT OF COMMERCE
Board. deferred or reduced on foreign-status
Production under FTZ procedures production equipment. Foreign-Trade Zones Board
could exempt Digi-Key from customs The components and materials
duty payments on the foreign-status sourced from abroad include: Fan [S–185–2018]
components used in export production. axials; alkaline batteries; zinc batteries;
On its domestic sales, for the foreign- Foreign-Trade Zone 287—Tunica
nickel cadmium batteries; nickel metal County, Mississippi Application for
status materials/components noted hydride batteries; aluminum capacitors;
below, Digi-Key would be able to choose Subzone Future Electronics
plug insulation displacement Distribution Center, L.P., Southaven,
the duty rates during customs entry connectors, printed circuit board
procedures that apply to: Floor Mississippi
connector ribbons, and connector plugs;
preparation tapes; tape polymer resins;
connector splices, connector terms, An application has been submitted to
anti-reflective tapes; custom cable
assemblies of light emitting diodes; connector strain reliefs, cable modular the Foreign-Trade Zones (FTZ) Board by
velostat foam; heatshrinks; hook and coils, and cable ribbons used in custom Tunica County, grantee of FTZ 287,
loop re-closable fasteners; radio cable assemblies (duty rate ranges from requesting subzone status for the
frequency shielding gold and copper duty-free to 5.3%). The request facilities of Future Electronics
tapes; wire sleeves; radio frequency indicates that several components will Distribution Center, L.P., located in
shielding tape aluminum foil; custom be admitted to the zone in privileged Southaven, Mississippi. The application
fan cooling assemblies; starter foreign status (19 CFR 146.41), thereby was submitted pursuant to the
evaluation boards; aluminum strips; precluding inverted tariff benefits on provisions of the Foreign-Trade Zones
custom reels of electrical transformers; such items. The request also indicates Act, as amended (19 U.S.C. 81a–81u),
modular power supplies; nickel-metal that certain materials/components are and the regulations of the FTZ Board (15
hydride battery packs; custom reel of subject to special duties under Section CFR part 400). It was formally docketed
inductors; alkaline battery packs; 232 of the Trade Expansion Act of 1962 on October 30, 2018.
lithium battery packs; carbon zinc (Section 232) and Section 301 of the The proposed subzone (51.036 acres)
battery packs; nickel cadmium battery Trade Act of 1974 (Section 301), is located at 4150 Old Airways
packs; custom reel of radio frequency depending on the country of origin. The Boulevard, Southaven, Desoto County.
integrated circuits; custom speaker applicable Section 232 and Section 301 No authorization for production activity
cables; programmed microcontrollers; decisions require subject merchandise has been requested at this time. The
custom buzzers for indication or alerts; to be admitted to FTZs in privileged proposed subzone would be subject to
custom reel of ceramic dielectric foreign status (19 CFR 146.41). the existing activation limit of FTZ 287.
capacitors; custom reel of capacitors; In accordance with the FTZ Board’s
custom reel of fixed carbon resistors; Public comment is invited from
interested parties. Submissions shall be regulations, Qahira El-Amin of the FTZ
custom reel of resistors; custom cable of Staff is designated examiner to review
thermistors; custom cable of rotary non- addressed to the Board’s Executive
Secretary at the address below. The the application and make
contact sensors; custom reel of diodes recommendations to the Executive
for over voltage protection; custom reel closing period for their receipt is
Secretary.
of integrated circuits; custom cable December 17, 2018.
assemblies for pushbutton switches; Public comment is invited from
A copy of the notification will be
custom cable assemblies; custom reel of interested parties. Submissions shall be
available for public inspection at the
female terminal connectors and slotted addressed to the FTZ Board’s Executive
Office of the Executive Secretary, Secretary at the address below. The
PVC wire ducts for cable management; Foreign-Trade Zones Board, Room
custom reel of zener diodes; custom reel closing period for their receipt is
21013, U.S. Department of Commerce, December 17, 2018. Rebuttal comments
of mosfets; custom reel of transistors; 1401 Constitution Avenue NW,
custom reel of LEDs and optocouplers; in response to material submitted
Washington, DC 20230–0002, and in the during the foregoing period may be
custom reel of piezoelectric crystals and ‘‘Reading Room’’ section of the Board’s
programmed oscillators; programmed submitted during the subsequent 15-day
website, which is accessible via period to January 2, 2019.
reel of integrated circuits—memories
www.trade.gov/ftz.
and amplifiers; custom reel of integrated A copy of the application will be
circuits; custom reel of particle For further information, contact available for public inspection at the
accelerators; programmed encoders; Christopher Wedderburn at Office of the Executive Secretary,
coaxial cables; modular cables and Chris.Wedderburn@trade.gov or (202) Foreign-Trade Zones Board, Room
custom cable of female terminal 482–1963. 21013, U.S. Department of Commerce,
connectors; multi-pair cables, insulated Dated: November 1, 2018. 1401 Constitution Avenue NW,
displacement custom cables, ribbon Washington, DC 20230–0002, and in the
Andrew McGilvray,
cable custom cables, and cable grounds; ‘‘Reading Room’’ section of the FTZ
ribbon cable custom cables; cable fiber Executive Secretary. Board’s website, which is accessible via
optics; cable flex shields; protective [FR Doc. 2018–24337 Filed 11–6–18; 8:45 am] www.trade.gov/ftz.
sleeving hoses; snap-on lens for light BILLING CODE 3510–DS–P
For further information, contact
emitting diodes and brightness Qahira El-Amin at Qahira.El-Amin@
amozie on DSK3GDR082PROD with NOTICES1
enhancement films; custom reel of trade.gov or (202) 482–5928.
pressure sensors; custom reel of current
Dated: October 31, 2018.
switch sensors, and dual lock adhesive
custom assemblies (duty rate ranges Andrew McGilvray,
from duty-free to 7%). Digi-Key would Executive Secretary.
be able to avoid duty on foreign-status [FR Doc. 2018–24338 Filed 11–6–18; 8:45 am]
components which become scrap/waste. BILLING CODE 3510–DS–P
VerDate Sep<11>2014 17:46 Nov 06, 2018 Jkt 247001 PO 00000 Frm 00004 Fmt 4703 Sfmt 9990 E:\FR\FM\07NON1.SGM 07NON1](https://thefederalregister.org/doc/83_FR_55907/page/1.svg)
Document Created: 2018-11-07 00:04:35
Document Modified: 2018-11-07 00:04:35
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| FR Citation | 83 FR 55691 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR