Document

Notice of Availability of the Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-493, Revision 4, “Clarify Application of Setpoint Methodology for LSSS Functions”

The NRC is announcing the availability of model applications (with model no significant hazards consideration determinations) and model safety evaluations (SEs) of the options f...

Nuclear Regulatory Commission
  1. [NRC-2009-0487]

AGENCY:

Nuclear Regulatory Commission (NRC).

ACTION:

Notice of Availability.

SUMMARY:

The NRC is announcing the availability of model applications (with model no significant hazards consideration determinations) and model safety evaluations (SEs) of the options for plant-specific adoption of Technical Specifications Task Force (TSTF) Traveler TSTF-493, Revision 4, “Clarify Application of Setpoint Methodology for LSSS Functions.” TSTF-493, Revision 4, and an errata sheet are available in the Agencywide Documents Access and Management System (ADAMS) under Accession Numbers ML100060064 and ML101160026, respectively. The proposed changes revise Standard Technical Specifications (TSs) with respect to limiting safety system settings (LSSSs) assessed during periodic testing and calibration of instrumentation that may have an adverse effect on equipment operability. This model SEs will facilitate expedited approval of plant-specific adoption of TSTF-493, Revision 4.

Documents: You can access publicly available documents related to this notice using the following methods:

NRC's Public Document Room (PDR): The public may examine and have copied for a fee publicly available documents at the NRC's PDR, Public File Area O1 F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland.

NRC's Agencywide Documents Access and Management System (ADAMS): Publicly available documents created or received at the NRC are available electronically at the NRC's Electronic Reading Room at www.nrc.gov/​reading-rm/​adams.html. From this page, the public can gain entry into ADAMS, which provides text and image files of NRC's public documents. If you do not have access to ADAMS or if there are problems in accessing the documents located in ADAMS, contact the NRC's PDR reference staff at 1-800-397-4209, 301-415-4737, or by e-mail to .

The model applications (with model no significant hazards consideration determinations) and model SEs of the options for plant-specific adoption of TSTF-493, Revision 4, are available electronically under ADAMS Accession Numbers: ML100710442 and ML100710443. The NRC staff disposition of comments received to the Notice of Opportunity for Comment announced in the Federal Register on November 10, 2009 (74 FR 58065-58067), is available electronically under ADAMS Accession Number ML100780154.

Federal Rulemaking Website: Public comments received and supporting materials related to this notice can be found at www.regulations.gov by searching on Docket ID: NRC-2009-0487.

FOR FURTHER INFORMATION CONTACT:

Mr. Carl S. Schulten, Senior Reactor Systems Engineer, Technical Specifications Branch, Mail Stop: O-7 C2A, Division of Inspection and Regional Support, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, Washington, DC, 20555-0001; telephone 301-415-1192 or e-mail at or Ms. Michelle C. Honcharik, Senior Project Manager, Licensing Processes Branch, Mail Stop: O-12 D1, Division of Policy and Rulemaking, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; telephone 301-415-1774 or e-mail at .

SUPPLEMENTARY INFORMATION:

TSTF-493, Revision 4, is applicable to all nuclear power reactors. Licensees opting to apply for this TS change are responsible for reviewing the NRC staff's model SE, referencing the applicable technical justifications, and providing any necessary plant-specific information. The NRC will process each amendment application responding to this notice of availability according to applicable NRC rules and procedures.

The models do not prevent licensees from requesting an alternate approach or proposing changes other than those proposed in TSTF-493, Revision 4. However, significant deviations from the approach recommended in this notice or the inclusion of additional changes to the license require additional NRC staff review. This may increase the time and resources needed for the review or result in NRC staff rejection of the license amendment request (LAR). Licensees desiring significant deviations or additional changes should instead submit an LAR that does not claim to adopt TSTF-493, Revision 4.

The NRC staff requests that each licensee applying for the changes proposed in TSTF-493, Revision 4, include documentation regarding the following in their LAR:

Adoption of TSTF-493, Option A With Changes to Setpoint Values

Adoption of TSTF-493, Option A Without Changes to Setpoint Values

Adoption of TSTF-493 With Option B—the Setpoint Control Program Option

Dated at Rockville, Maryland, this 30th day of April 2010.

For the Nuclear Regulatory Commission.

Eric E. Bowman,

Acting Chief, Licensing Processes Branch, Division of Policy and Rulemaking, Office of Nuclear Reactor Regulation.

[FR Doc. 2010-11130 Filed 5-10-10; 8:45 am]

BILLING CODE 7590-01-P

Legal Citation

Federal Register Citation

Use this for formal legal and research references to the published document.

75 FR 26294

Web Citation

Suggested Web Citation

Use this when citing the archival web version of the document.

“Notice of Availability of the Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-493, Revision 4, “Clarify Application of Setpoint Methodology for LSSS Functions”,” thefederalregister.org (May 11, 2010), https://thefederalregister.org/documents/2010-11130/notice-of-availability-of-the-models-for-plant-specific-adoption-of-technical-specifications-task-force-traveler-tstf-49.