SUPPLEMENTARY INFORMATION:

Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA) requires the Commission to adopt mandatory standards for durable infant or toddler products. 15 U.S.C. 2056a(b)(1). Mandatory standards must be “substantially the same as” voluntary standards, or may be “more stringent” than voluntary standards, if the Commission determines that more stringent requirements would further reduce the risk of injury associated with the products. Id. Mandatory standards may be based, in whole or in part, on a voluntary standard.

Pursuant to section 104(b)(4)(B) of the CPSIA, if a voluntary standards organization revises a standard that has been adopted, in whole or in part, as a consumer product safety standard under CPSIA section 104, it must notify the Commission. The revised voluntary standard then shall be considered to be a consumer product safety standard issued by the Commission under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058), effective 180 days after the date on which the organization notifies the Commission (or a later date specified by the Commission in the Federal Register ) unless, within 90 days after receiving that notice, the Commission responds to the organization that it has determined that the proposed revision does not improve the safety of the consumer product covered by the standard, and therefore, the Commission is retaining its existing mandatory consumer product safety standard. 15 U.S.C. 2056a(b)(4)(B).

Under this authority, in 2013 the Commission issued a mandatory safety rule for bassinets and cradles. The rulemaking created 16 CFR part 1218, which incorporated by reference ASTM F2194-13, Standard Consumer Safety Specification for Bassinets and Cradles, with modifications to make the standard more stringent. 78 FR 63019 (Oct. 23, 2013). The mandatory standard included performance requirements and test methods, as well as requirements for warning labels and instructions, to address hazards to children. Since promulgation of the final rule, ASTM has published several revisions to ASTM F2194-13: 2013a, 2016, 2016, ε1 and 2022, but ASTM did not notify CPSC of these updates.

In June 2022, ASTM published a revised version of the voluntary standard for bassinets and cradles, and made editorial revisions in July 2022. On July 18, 2022, ASTM notified the Commission that it had approved and published a revised version of the voluntary standard, ASTM F2194-22. ε1 CPSC staff is assessing the revised voluntary standard to determine, consistent with section 104(b)(4)(B) of the CPSIA, its effect on the safety of consumer products covered by the standard. The Commission invites public comment on that question to inform staff's assessment and any subsequent Commission consideration of the revisions in ASTM F2194-22. ε^[1]

Read-only copies of redlines demonstrating revisions to ASTM F2194-13a, ASTM F2194-16, ASTM F2194-16, ε1 , ASTM F2194-22, and ASTM F2194-22, ε1 , are available for review on ASTM's website ( https://www.astm.org/​CPSC.htm), at no cost. Likewise, a read-only copy of the existing, incorporated standard, ASTM F2194-13, is available for viewing, at no cost, on the ASTM website at: https://www.astm.org/​READINGLIBRARY/​. Interested parties can also download copies of the standards by purchasing them from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: 610-832-9585; https://www.astm.org. Alternatively, interested parties may schedule an appointment to inspect copies of the standards at CPSC's Division of the Secretariat, U.S. Consumer Product Safety Commission, 4330 East-West Highway, Bethesda, MD 20814, telephone: 301-504-7479; email: cpsc-os@cpsc.gov.

Comments must be received by August 11, 2022. Because of the short statutory time frame Congress established for the Commission to consider revised voluntary standards under section 104(b)(4) of the CPSIA, CPSC will not consider comments received after this date.

87 FR 45303