Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This AD was prompted by report...
[Docket No. FAA-2023-1215; Project Identifier MCAI-2023-00196-T; Amendment 39-22528; AD 2023-17-02]
RIN 2120-AA64
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This AD was prompted by reports of a high number of events related to stall warnings upon landing, following introduction of the ice speed function within the stall warning system. This AD requires modification of the stall warning/identification system, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective October 19, 2023.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 19, 2023.
ADDRESSES:
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2023-1215; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
For EASA material incorporated by reference in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; emailADs@easa.europa.eu;
website
easa.europa.eu.
You may find this material on the EASA website at
ad.easa.europa.eu.
You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket atregulations.gov
under Docket No. FAA-2023-1215.
FOR FURTHER INFORMATION CONTACT:
Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3220; email
Shahram.Daneshmandi@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain SAAB/SF340A and SAAB 340B airplanes. The NPRM published in the
Federal Register
on June 20, 2023 (88 FR 39794). The NPRM was prompted by AD 2022-0216R1, dated February 1, 2023; corrected February 2, 2023, issued by EASA, which is the Technical Agent for the Member States of the European Union (EASA AD 2022-0216R1) (also referred to as the MCAI). The MCAI states that following the introduction of the ice speed function within the SAAB 340 stall warning system, a high number of events have been reported related to stall warnings upon landing. Subsequent investigation determined that the margin to stall warning is lower when ice speed is ON than with ice speed OFF. This condition, if not corrected, could lead to inappropriate stall warnings during the landing phase and result in increased pilot workload during a critical phase of flight.
In the NPRM, the FAA proposed to require accomplishing the actions specified in EASA AD 2022-0216R1, except for any differences identified as exceptions in the regulatory text of this AD. The FAA is issuing this AD to address the unsafe condition on these products.
You may examine the MCAI in the AD docket at
regulations.gov
under Docket No. FAA-2023-1215.
( printed page 63010)
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.
EASA AD 2022-0216R1 specifies procedures for modifying the stall warning/identification system to introduce an ice speed cancel logic. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in
ADDRESSES
.
Costs of Compliance
The FAA estimates that this AD affects 79 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
Labor cost
Parts cost
Cost per product
Cost on U.S. operators
Up to 30 work-hours × $85 per hour = $2,550
$7,900
Up to $10,450
Up to $825,550.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
2. The FAA amends § 39.13 by adding the following new airworthiness directive:
2023-17-02 Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics):
Amendment 39-22528; Docket No. FAA-2023-1215; Project Identifier MCAI-2023-00196-T.
(a) Effective Date
This airworthiness directive (AD) is effective October 19, 2023.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Saab AB, Support and Services (formerly known as Saab AB, Saab Aeronautics) Model 340A (SAAB/SF340A) and SAAB 340B airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2022-0216R1, dated February 1, 2023; corrected February 2, 2023 (EASA AD 2022-0216R1).
(d) Subject
Air Transport Association (ATA) of America Code 27, Flight controls.
(e) Unsafe Condition
This AD was prompted by reports of a high number of events related to stall warnings upon landing, following introduction of the ice speed function within the stall warning system. The FAA is issuing this AD to address a margin to stall warning that is lower when ice speed is ON than with ice speed OFF. The unsafe condition, if not addressed, could lead to inappropriate stall warnings during the landing phase and result in increased pilot workload during a critical phase of flight.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2022-0216R1.
(h) Exceptions to EASA AD 2022-0216R1
(1) Where EASA AD 2022-0216R1 refers to November 16, 2022 (the effective date of EASA AD 2022-0216), this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2022-0216R1 does not apply to this AD.
(i) Additional AD Provisions
The following provisions also apply to this AD:
(1)
Alternative Methods of Compliance (AMOCs):
The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the International Validation Branch, send
( printed page 63011)
it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to:
9-AVS-AIR-730-AMOC@faa.gov.
Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2)
Contacting the Manufacturer:
For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Saab AB, Support and Services' EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
(j) Additional Information
For more information about this AD, contact Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3220; email
Shahram.Daneshmandi@faa.gov.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) European Union Aviation Safety Agency (EASA) AD 2022-0216R1, dated February 1, 2023; corrected February 2, 2023.
(ii) [Reserved]
(3) For EASA AD 2022-0216R1, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email
ADs@easa.europa.eu;
website
easa.europa.eu.
You may find this EASA AD on the EASA website at
ad.easa.europa.eu.
(4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.
Use this for formal legal and research references to the published document.
88 FR 63009
Web Citation
Suggested Web Citation
Use this when citing the archival web version of the document.
“Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes,” thefederalregister.org (September 14, 2023), https://thefederalregister.org/documents/2023-19899/airworthiness-directives-saab-ab-support-and-services-formerly-known-as-saab-ab-saab-aeronautics-airplanes.