Certain New Chemicals; Receipt and Status Information for February 2024
EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly avail...
EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the
Federal Register
pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 2/01/2024 to2/29/2024.
DATES:
Comments identified by the specific case number provided in this document must be received on or before April 26, 2024.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2024-0057, through the
Federal eRulemaking Portal
at
https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting and visiting the docket, along with more information about dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact:
Jim Rahai, Project Management and Operations Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address:
rahai.jim@epa.gov. For general information contact:
The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address:
TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. What action is the Agency taking?
This document provides the receipt and status reports for the period from 2/01/2024 to 2/29/2024. The Agency is providing notice of receipt of PMNs, SNUNs, and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.
EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at:
https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices.
This information is updated on a weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601et seq.,
a chemical substance may be either an “existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory please go to:
https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to:
https://www.epa.gov/chemicals-under-tsca.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the
Federal Register
certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical
( printed page 21248)
substances that are currently under EPA review or have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in general.
D. Does this action have any incremental economic impacts or paperwork burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1.
Submitting confidential business information (CBI).
Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending, or concluded. In 1995, the Agency modified its approach and streamlined the information published in the
Federal Register
after providing notice of such changes to the public and an opportunity to comment (see the
Federal Register
of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at:
https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices.
This information is updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (
i.e.,
domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” (
e.g.
P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.
Table I—PMN/SNUN/MCANs Approved * From 2/01/2024 to 2/29/2024
(S) Adhesive Sealant Foam for use in the construction and DIY (do it yourself) applications
(G) Aryl-dicarboxylic acid, polymer with alkanedioic acid, 2,2-oxypoly[alkanol], polymethylenepolyphenylene isocyanate and alkane diol.
P-24-0070A
3
02/21/2024
CBI
(S) Adhesive Sealant Foam for use in the construction and DIY (do it yourself) applications
(G) Aryl-dicarboxylic acid, polymer with alkanedioic acid, 2,2-oxypoly[alkanol], polymethylenepolyphenylene isocyanate and alkane diol.
P-24-0071
3
02/15/2024
CBI
(G) Wetting agent
(G) sulfonyl carbamate of ethoxylated fatty alcohol.
P-24-0072
3
02/15/2024
CBI
(G) Wetting agent
(G) sulfonyl carbamate of ethoxylated alkyl alcohol.
P-24-0073
3
02/15/2024
CBI
(G) Wetting agent
(G) secondary alcohol ethoxylate of sulfonyl carbamate.
P-24-0074
3
02/15/2024
CBI
(G) Wetting agent
(G) secondary alcohol ethoxylate of sulfonyl carbamate.
P-24-0076
2
02/12/2024
Crison, LLC
(S) Mining Collector, Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-[3-[(3-aminopropyl)amino]propyl]-omega-(1-methylethoxy)-.
P-24-0076A
4
02/20/2024
Crison, LLC
(S) Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-[3-[(3-aminopropyl)amino]propyl]-omega-(1-methylethoxy)-.
P-24-0077
2
02/12/2024
Crison, LLC
(S) Mining Collector, Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], -[3-[(3-aminopropyl)amino]propyl]—propoxy-.
P-24-0077A
4
02/20/2024
Crison, LLC
(S) Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-[3-[(3-aminopropyl)amino]propyl]-omega-propoxy-.
P-24-0078
2
02/12/2024
Crison, LLC
(S) Mining Collector, Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-[3-[(3-aminopropyl)amino]propyl]-omega-butoxy-.
P-24-0078A
4
02/20/2024
Crison, LLC
(S) Asphalt Emulsifier
(S) Poly[oxy(methyl-1,2-ethanediyl)], alpha-[3-[(3-aminopropyl)amino]propyl]-omega-butoxy-.
P-24-0079
3
02/09/2024
CBI
(G) Fuel Additive
(G) Alkyated succinimide.
P-24-0082
2
02/21/2024
CBI
(G) Additive used in 3D printing ink formulations
(S) 2-Propenoic acid, 3-bromo-2,2-bis(bromomethyl)propyl ester.
P-24-0084
1
02/22/2024
CBI
(G) Coating, Coating ingredient
(G) Polymer of dicarboxylic acid, aliphatic diols with cycloaliphatic diisocyanate, hydroxyethyl acrylate-blocked.
P-24-0088
1
02/26/2024
HSAGP Energy, LLC
(G) Substance for use in the manufacture of battery components
(G) Mixed metal oxide.
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (
e.g.,
amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.
Table II—NOCs Approved * From 2/01/2024 to 2/29/2024
Case No.
Received
date
Commencement date
If amendment, type of amendment
Chemical substance
P-12-0212
01/24/2024
12/20/2023
N
(G) 1,4-benzenedicarboxylic acid, polymer with bis(hydroxymethyl)alkanediol, alkanedioic acid, alpha-hydro-omega-hydroxypoly(oxy-1,2-ethanediyl), 1,3-isobenzofurandione, methyloxoheteromonocycle, 2,2′-oxybis[ethanol] and alkanepolyol.
P-19-0169
02/23/2024
02/13/2024
N
(S) Benzoic acid, 3-fluoro-4-methyl-.
P-19-0172
02/13/2024
02/13/2024
N
(S) Benzoic acid, 3-chloro-2-fluoro-.
P-19-0181
02/13/2024
02/13/2024
N
(S) Benzoic acid, 3-chloro-2-fluoro-, sodium salt (1:1).
P-19-0188A
02/08/2024
02/01/2023
Amended the generic chemical name
(G) Octadecanamide, n,n-dialkyl, salts.
P-20-0007
02/13/2024
02/13/2024
N
(S) Benzoic acid, 3-fluoro-4-methyl-, sodium salt (1:1).
P-20-0070
02/08/2024
02/01/2024
N
(S) Nonanamide, n,n-dimethyl-.
P-21-0175A
02/09/2024
09/22/2023
Relinquished chemical identity CBI claim
(S) Carbonic acid,diphenyl ester, polymer with 1,4-butanediol and 1,10-decanediol.
P-21-0212
02/19/2024
01/22/2024
N
(G) Diketone compound metal complex.
P-22-0050
02/26/2024
02/03/2024
N
(G) Alkene, alkoxy-, polymer with alkoxyalkene.
P-22-0054
02/08/2024
10/17/2023
N
(G) Graphene.
( printed page 21252)
In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.
Table III—Test Information Received From 2/01/2024 to 2/29/2024
Case No.
Received
date
Type of test information
Chemical substance
P-14-0712
02/09/2024
Polychlorinated Dibenzodioxins and Polychlorinated dibenzofurans Testing
(S) Waste plastics, pyrolyzed, C5-55 fraction.
P-22-0179
02/15/2024
Water Solubility: Column Elution Method; Shake Flask Method (OECD Test Guideline 105); Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107); Dissociation Constants in Water (OECD Test Guideline 112); Partition Coefficient (n-octanol/water), Estimation by Liquid Chromatography (OECD Test Guideline 117)
(G) Sulfonium, (alkylsubstitutedphenyl)diphenyl-, salt with 1-(heterosubstitutedalkyl)-2,2,2-triheterosubstitutedalkyl trisubstitutedbenzoate (1:1).
P-22-0180
02/15/2024
Water Solubility: Column Elution Method; Shake Flask Method (OECD Test Guideline 105); Partition Coefficient (n-octanol/water), Shake Flask Method (OECD Test Guideline 107); Dissociation Constants in Water (OECD Test Guideline 112); Partition Coefficient (n-octanol/water), Estimation by Liquid Chromatography (OECD Test Guideline 117)
If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under
FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Use this for formal legal and research references to the published document.
89 FR 21247
Web Citation
Suggested Web Citation
Use this when citing the archival web version of the document.
“Certain New Chemicals; Receipt and Status Information for February 2024,” thefederalregister.org (March 27, 2024), https://thefederalregister.org/documents/2024-06437/certain-new-chemicals-receipt-and-status-information-for-february-2024.