Document
Presence Sensing Device Initiation (PSDI) Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the ...
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of the continuing effort to reduce paperwork and respondent (
i.e.,
employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, the collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of effort in obtaining information (29 U.S.C. 657).
The following sections describe who uses the information collected under each requirement, as well as how they use it. Paragraph 1910.217(h) regulates the use of presence sensing devices (“PSDs”) used to initiate the operation of mechanical power presses; a PSD (
e.g.,
a photoelectric field or curtain) automatically stops the stroke of a mechanical power press when the device detects an operator entering a danger zone near the press. A mechanical power press using presence sensing device initiation (PSDI) automatically starts (initiates) the stroke when the device detects no operator within the danger zone near the press. The certification/validation of safety systems for PSDI shall consider the press, controls, safeguards, operator, and environment as an integrated system which shall comply with 29 CFR 1910.217(a) through (h). Accordingly, the Standard protects employees from serious crush injuries, amputations, and death.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
- Whether the proposed information collection requirements are necessary for the proper performance of the agency's functions to protect workers, including whether the information is useful;
- The accuracy of OSHA's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;
- The quality, utility, and clarity of the information collected; and
- Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information, and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend the approval of the information collection requirements contained in the Presence Sensing Device Initiation (PSDI) Standard (29 CFR 1910.217(h)). The agency is requesting that the burden of one (1) hour remains the same.
OSHA will summarize the comments submitted in response to this notice and will include this summary in the request to OMB to extend the approval of the information collection requirements.
Type of Review:
Extension of a currently approved collection.
Title:
Presence Sensing Device Initiation (PSDI) Standard.
OMB Control Number:
1218-0143.
Affected Public:
Business or other for-profits.
Number of Respondents:
10.
Number of Responses:
10.
Frequency of Responses:
On occasion.
Average Time per Response:
6 minutes.
Estimated Total Burden Hours:
1: 1.
Estimated Cost (Operation and Maintenance):
$0.
IV. Public Participation—Submission of Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in response to this document as follows: (1) electronically at
https://www.regulations.gov,
which is the Federal eRulemaking Portal; or (2) by facsimile (fax), if your comments, including attachments, are not longer than 10 pages you may fax them to the OSHA Docket Office at (202) 693-1648. All comments, attachments, and other material must identify the agency name and the OSHA docket number for the ICR (Docket No. OSHA-2010-0009). You may supplement electronic submission by uploading document files electronically.
Comments and submissions are posted without change at
https://www.regulations.gov.
Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and dates of birth. Although all submissions are listed in the
https://www.regulations.gov
index, some information (
e.g.,
copyrighted material) is not publicly available to read or download from this website. All submission, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the
https://www.regulations.gov
website to submit comments and access the docket is available at the website's “User Tips” link.
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) for information about materials not available from the website, and for assistance in using the internet to locate docket submissions.
V. Authority and Signature
Amanda Laihow, Acting Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor's Order No. 8-2020 (85 FR 58393).
Signed at Washington, DC, on September 18, 2025.
Amanda Laihow,
Acting Assistant Secretary of Labor for Occupational Safety and Health.