Certain New Chemicals; Receipt and Status Information for February and March 2026
This document announces the Agency's receipt of new chemical submissions under the Toxic Substances Control Act (TSCA), including information about the receipt of a Premanufactu...
This document announces the Agency's receipt of new chemical submissions under the Toxic Substances Control Act (TSCA), including information about the receipt of a Premanufacture Notice (PMN), Significant New Use Notice (SNUN), Microbial Commercial Activity Notice (MCAN), and an amendment to a previously submitted notice; test information; a biotechnology exemption application; an application for a test marketing exemption (TME); and a notice of commencement of manufacture (defined by statute to include import) (NOC) for a new chemical substance. This document also provides a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review. EPA is hereby providing notice of receipt of this information, as required by TSCA, and an opportunity to comment. This document covers new chemical submissions that have passed an initial screening and, for PMNs, SNUNs and MCANs, were determined to be complete during the period from 03/1/2026 to 03/31/2026 regardless of initial submission date.
DATES:
Comments must be received on or before July 15, 2026.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2026-1387
( printed page 35977)
and the specific case number provided in this document for the chemical substance related to your comment, online at
https://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting on and visiting the docket, along with more information about dockets generally, are available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information:
Jim Rahai, Office of Chemical Safety and Pollution Prevention (OCSPP-OMCO-RISD), Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address:
rahai.jim@epa.gov.
For general information:
The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address:
TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. Does this action apply to me?
This action provides information that is directed to the public in general.
B. What is the Agency's authority for taking this action?
EPA is publishing this document in the
Federal Register
as required by sections 5 of the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601et seq.,
and corresponding EPA regulations.
Under TSCA, a chemical substance may be either an “existing” chemical substance or a “new” chemical substance, see
https://www.epa.gov/chemicals-under-tsca. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” See TSCA section 3(2) and (11). For more information about the TSCA Inventory, see
https://www.epa.gov/-inventory.
Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the new chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture a new chemical substance, or manufacture or process a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical substances will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME.
Premanufacture notification procedures for reviewing certain new microbial products of biotechnology are established in 40 CFR part 725. These pertain to MCANs and biotechnology exemptions, including TSCA experimental release applications (TERAs), TMEs for microorganisms, and Tier I and Tier II exemptions.
C. What action is the Agency taking?
This document provides notice of receipt and status reports for the covered period and certain submissions under TSCA section 5 and provides an opportunity to comment on this information. The Agency provides information about the receipt of PMNs, SNUNs, MCANs, and amendments to a previously submitted notice; test information; biotechnology exemption applications under 40 CFR part 725; TME applications; NOCs for new chemical substances; and a periodic status report on chemical substances that are currently under EPA review or have recently concluded review.
D. What should I consider as I prepare my comments for EPA?
1.
Submitting CBI.
Do not submit CBI to EPA through
https://www.regulations.gov
or email. If you wish to include CBI in your comment, please follow the instructions at
https://www.epa.gov/dockets/commenting-epa-dockets#rules
and clearly mark the information that you claim to be CBI. In addition to one complete version of the comment that includes CBI, a copy of the comment without CBI must be submitted for inclusion in the public docket. Information marked as CBI will not be disclosed except in accordance with procedures set forth in 40 CFR parts 2 and 703.
A. What information is being provided in this document?
The tables in this document provide the following information on the TSCA section 5 submissions received by EPA during this period and determined to be completely consistent with 40 CFR 720.70(a).
Case number.
The EPA number assigned to the TSCA section 5 submissions. Please note that a case number may be listed more than once in the table when the submission involves a subsequent amendment.
Chemical substance.
Name of the chemical substance, or generic name if the specific name is claimed as CBI.
Manufacturer.
Name of the submitting manufacturer, to the extent that such information is not subject to a CBI claim. The term “manufacturer” is defined by statute to include importer.
Use(s).
Potential uses identified by the manufacturer.
Received.
Date the submission was received by EPA.
Commencement.
Date of commencement provided by the submitter in the NOC.
Test information.
For test information received, the type of test information submitted to EPA is based on the attachment type and subtype data selected by the submitter.
B. What do the acronyms mean that are used in the tables?
As used in each of the tables, the following explanations apply:
(S) indicates that the information in the table is the specific information provided by the submitter.
(G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI.
C. How can I access other information about TSCA section 5 submissions?
EPA provides information on its website about cases reviewed under TSCA section 5, including the PMNs, SNUNs, MCANs, and exemption applications received; the date of receipt; the final EPA determination on the submission; and the effective date of EPA's determination. See
https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/pre-manufacture-notices.
In addition, information EPA receives about chemical substances under TSCA, including non-CBI new chemical
( printed page 35978)
submissions, can be accessed in ChemView at
https://chemview.epa.gov/.
III. Receipt Reports
Table 1 provides non-CBI information for the PMNs, SNUNs and MCANs received by EPA that have passed an initial screening and determined to be completely consistent with 40 CFR 720.70(a) during this period.
Table 1—PMN/SNUN/MCANs Received and Under Review
Case No.
Received
date
Manufacturer
Use
Chemical substance
P-24-0083
03/16/2026
CBI
(G) Ingredient for cleaning products
(G) Branched alcohol alkoxylate.
P-24-0179
02/25/2026
CBI
(G) Component in batteries
(G) Aluminum- and metal-doped cobalt metal nickel oxide.
P-24-0180
02/25/2026
CBI
(G) Component in batteries
(G) Aluminum- and metal- and metal-doped cobalt metal nickel oxide.
P-24-0181
02/25/2026
CBI
(G) Component in batteries
(G) Metal- and metal-doped cobalt metal metal nickel oxide.
P-24-0195
03/17/2026
CBI
(G) Heat transfer fluid, Dielectric testing
(G) Trimers of hexafluoropropene.
P-26-0019
03/02/2026
Power Dream America, Inc
(S) Industrial use coatings: Functional additive/reactive component for UV/thermal-curable acrylate coating formulations (thiol-functionalized acrylate) to improve crosslinking and performance. Industrial use inks: Functional additive/reactive component for UV/thermal-curable acrylate ink formulations (thiol-functionalized acrylate) to improve cure and performance
(G) Thiol-functionalized acrylate.
P-26-0019
03/09/2026
Power Dream America, Inc
(S) Industrial use coatings: Functional additive/reactive component for UV/thermal-curable acrylate coating formulations (thiol-functionalized acrylate) to improve crosslinking and performance. Industrial use inks: Functional additive/reactive component for UV/thermal-curable acrylate ink formulations (thiol-functionalized acrylate) to improve cure and performance
(G) Thiol-functionalized acrylate.
P-26-0037
03/13/2026
Nanovere Technologies, LLC
(S) No additional uses are intended beyond those described in this submission
(S) Oxirane, 2-methyl-, polymer with 1,6-diisocyanatohexane, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, 2-methyloxirane polymer with oxirane ether with 1,2,3-propanetriol (3:1) and oxirane, 3-(trimethoxysilyl)-N- [3 -(trimethoxysilyl) propyl]-1-propanamine-blocked.
P-26-0037
03/18/2026
Nanovere Technologies, LLC
(S) No additional uses are intended beyond those described in this submission
(S) Oxirane, 2-methyl-, polymer with 1,6-diisocyanatohexane, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, 2-methyloxirane polymer with oxirane ether with 1,2,3-propanetriol (3:1) and oxirane, 3-(trimethoxysilyl)-N- [3 -(trimethoxysilyl) propyl]-1-propanamine-blocked.
P-26-0041
03/12/2026
CBI
(G) Industrial use in Oilfield
(G) Fatty acids and fatty acid unsatd., reaction products with ethyleneamines and citric acid.
P-26-0056
03/04/2026
Central Glass International
(S) Cleaning agents (metal cleaning, precision cleaning): These substances are used to remove contaminants (such as processing oil) adhering to the surface of metal processed parts and products, as well as fine particles and oils and grease adhering to electronic parts and optical equipment. Solvent: Dissolve the dissolving substance in the substance to prepare a mixed solution. Immerse the item to be coated in the mixed solution and then remove it and allow the substance to volatilize. After the substance volatilizes, the dissolved substance remains on the surface of the object to be coated
(G) Alkene, halosubstituted-polyhalosubstituted-.
P-26-0059
03/24/2026
Integrated Chemical Technologies, Inc
(S) CONDITIONER is added to hydrochloric acid to provide corrosion inhibition of steel and other metallurgies. Typical dosage ranges between 5-20 gallons of Conditioner per 1000 gallons of 15wt% HCl
(S) 2-Propen-1-one, 2-(methoxymethyl)-1-phenyl.
( printed page 35979)
P-26-0061
02/27/2026
Allnex USA, Inc
(S) Industrial protective metal topcoats
(G) Alkanedioic acid, 1,3-diethyl ester, polymer with .alpha.-[2,2- bis(hydroxymethyl)butyl]-.omega.-methoxypoly(oxy-1,2-ethanediyl), dimethyl carbonate, 1,6-hexanediol, 5-isocyanato-1-(isocyanatomethyl)-1,3,3- trimethylcyclohexane and tricyclodecanedimethanol, acrylic acid-pentaerythritol reaction products- and diethanolamine- and 2,2′-[oxybis(methylene)]bis[2-ethyl-1,3- propanediol] acrylate-blocked.
P-26-0062
02/26/2026
CBI
(S) Acrylic monomer, intended use to be polymerized in conjunction with other (meth)acrylates for coatings, paints, resins, etc
(S) Fatty acids, soya, epoxidized, Me esters, acrylates.
P-26-0062
03/16/2026
CBI
(S) Acrylic monomer, intended use to be polymerized in conjunction with other (meth)acrylates for coatings, paints, resins, etc
(S) Fatty acids, soya, epoxidized, Me esters, acrylates.
P-26-0063
02/26/2026
CBI
(G) Heat transfer fluid
(G) Alkene, halo-substituted, oligomer.
P-26-0064
03/04/2026
CBI
(S) Acrylate component for use in additive manufacturing (industrial 3D printing), in industrial UV/EB curable adhesives and composites and industrial UV/EB curable inks and/or coatings
(G) Reaction product of polyether diol, hydroxy (meth)acrylates, 2-oxepanone, and aliphatic diisocyanates.
P-26-0065
03/20/2026
CBI
(S) Substance used to improve mechanical properties in materials, for weight reduction in materials, in field emission applications, as a heating material, for heat dissipation, and to improve electrical conductivity
(G) Single-walled carbon nanotubes.
P-26-0066
03/16/2026
Clariant Corporation
(S) Lubricating agent and/or nucleating agent
(S) Waxes and waxy substances, rice bran, oxidized, sodium salts.
P-26-0066
03/18/2026
Clariant Corporation
(S) Lubricating agent and/or nucleating agent
(S) Waxes and waxy substances, rice bran, oxidized, sodium salts.
P-26-0067
03/17/2026
CBI
(G) Component used in the manufacture of electronics
(G) Alkyl alkenoic acid, (trialkoxymetalloid)alkyl ester, hydrolysis products with alumina and polyalkyl substituted amine.
P-26-0068
03/18/2026
CBI
(S) A photo initiator for UV-curable printing ink formulation
(G) 1-(Carbopolycyclic) substituted alkyl ketone.
P-26-0069
03/19/2026
CBI
(G) Component of printing formulation
(G) Alkyl alkenoic acid, (trialkoxymetalloid)alkyl ester, hydrolysis products with silica and polyalkyl substituted amine.
P-26-0070
03/20/2026
Elicit Plant US, Inc
(G) Component of fertilizer product
(G) Oligosaccharides, plant-based esters.
P-26-0071
03/20/2026
CBI
(S) Non-Mechanical Heat Transfer Fluid in support of Data Centers
(S) 3-Hexene, 1,1,1,2,2,5,5,6,6,6-decafluoro-, (3E).
P-26-0073
03/23/2026
Integrated Chemical Technologies, Inc
(S) Manufacture and process for use as and use as a component in oil production, specifically used as a corrosion inhibitor during acidizing of hydrocarbon shale formations
(S) Quinoxalinium, 1,4-bis(phenylmethyl)-, chloride (1:2).
P-26-0073
03/30/2026
Integrated Chemical Technologies, Inc
(S) Manufacture and process for use as and use as a component in oil production, specifically used as a corrosion inhibitor during acidizing of hydrocarbon shale formations
(S) Quinoxalinium, 1,4-bis(phenylmethyl)-, chloride (1:2).
(G) Polyalkyl substituted amine, hydrolysis products with silica and (trialkoxymetalloid)alkyl] substituted carbomonocycle.
P-26-0076
03/25/2026
Integer VSi Technologies, LLC
(S) Chemical used for coating parts used in high-temperature applications (
e.g.,
circuit boards in equipment used in high-temperature areas) by vapor deposition. Chemicals used for coating mandrels and guidewires by vapor deposition
(S) Tricyclo [8.2.2.2^ (4,7)] hexadeca-4,6,10,12,13,15-hexaene, 5,6,11,12,13,14,15,16-octafluoro-.
SN-25-0006
03/10/2026
CBI
(S) Substance for use in the manufacture of battery cathodes
(S) Phosphoric acid, iron (2+) lithium salt (1:1:1).
( printed page 35980)
SN-25-0007
03/19/2026
Essential Industries, Inc
(G) Additive used in commercial and consumer applications
(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with dimethyl carbonate, 1,2-ethanediamine, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 1,6-hexanediol and 1,1′-methylenebis[4-isocyanatocyclohexane], compd. with N, N-diethylethanamine.
Table 2 provides non-CBI information on the NOCs received by EPA that have passed an initial screening during this period.
Table 2—NOCs Received and Under Review
Case No.
Received
date
Commencement
date
Chemical substance
P-12-0165
03/10/2026
03/02/2026
(G) Alkenylamidoalkylammonium chloride, polymer with ethenamine, hydrochloride (PROVISIONAL).
P-19-0115
03/03/2026
02/04/2026
(G) Sulfonium, bis (dihalo carbomonocycle) carbomonocycle, substituted carbomonocyclic ester.
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Sulfonium, triphenyl-, salt with 2,4,5-trisubstituted-benzenesulfonate (1:1).
P-18-0281
03/18/2026
Worker Exposure Monitoring Report
(G) Cyclic sulfate.
P-18-0304
03/02/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Sulfonium, bis (dihalo carbomonocycle) carbomonocycle, salt with substituted heteropolycycle dihalo sulfo alkanoate (1:1).
P-18-0316
03/02/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Heteropolycycle, alkylaromatic-, salt with dihalo-substituted alkyl carbopolycycle carboxylate.
P-18-0338
03/02/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Sulfonium, triaryl-, salt with polyhalo-4-sulfoalkyl polycarbocyclic alkane-1-carboxylate (1:1).
P-19-0076
03/02/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Sulfonium, bis (dihalo carbomonocycle) carbomonocycle, salt with dihalo substituted alkyl carbopolycyclic carboxylate (1:1).
P-19-0078
03/06/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Substituted heterocyclic onium compound, salt with 2,2,2-trifluoro-1-(sulfomethyl)-1-(trifluoromethyl)ethyl 3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]tricycle[3.3.1.13,7]decane-1- carboxylate (1:1), polymer with acenaphthylene, 1-ethenyl-4-[(1-ethylcyclopentyl)oxy]benzene and 4-ethenylphenol, di-Me 2,2′-(1,2-diazenediyl)bis[2-methylpropanoate]-initiated.
P-19-0079
03/06/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G)) substituted heterocyclic onium compound, salt with 2,2,2-trifluoro-1-(sulfomethyl)-1-(trifluoromethyl)ethyl 3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]tricyclo[3.3.1.13,7]decane-1- carboxylate (1:1), polymer with acenaphthylene, 1-ethenyl-4-[[1-(1-methylethyl)cyclopentyl]oxy]benzene and 4-ethenylphenol, di-Me 2,2′-(1,2-diazenediyl)bis[2-methylpropanoate]-initiated.
P-19-0111
03/06/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Substituted heterocyclic onium compound, salt with 1-(difluorosulfomethyl)-2,2,2-trifluoroethyl 3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]tricyclo[3.3.1.13,7]decane-1-carboxylate (1:1), polymer with 3-etheylphenol, 1-(1-methylethyl)cyclopentyl 2-methyl-2-propenoate and 1-(7-oxabicyclo[2.2.1]hept-2-yl)cyclopentyl 2-methyl-2-propenoate, di-Me 2,2′-(1,2-diazenediyl)bis[2-methylpropenoate]-initiated.
P-19-0114
03/06/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Sulfonium, bis (dihalo carbomonocycle) carbomonocycle, substituted carbomonocyclic ester.
P-19-0133
03/06/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Heterodisubstituted-bile acid, 1-(difluorosulfomethyl)-2,2,2-trifluoroethyl ester, ion (1-), (5)-, triphenylsulfonium (1:1).
P-19-0166
03/10/2026
Photo transformation of Chemicals in Water—Direct Photolysis (OECD Test Guideline 316); Partition Coefficient (1-Octanol/Water): Slow-Stirring Method (OECD Test Guideline 123); Hydrolysis as a Function of pH (OECD Test Guideline 111)
Hydrolysis as a Function of pH (OECD Test Guideline 111)
(G) Substituted heterocyclic onium compound, salt with heteropolysubstitutedalkyl substitutedtricycloalkanecarboxylate (1:1), polymer with 3-ethenylphenol and heterosubstitutedaromaticalkyl 2-methyl-2-propenoate, di-Me 2,2′-(1,2-diazenediyl) bis[2-methylpropanoate]-initiated.
P-23-0080
03/13/2026
Hydrolysis as a Function of pH (OECD Test Guideline 111)
Dissociation Constants in Water (OECD Test Guideline 112); photo transformation of Chemicals in Water—Direct Photolysis (OECD Test Guideline 316); Partition Coefficient (n-Octanol/Water), HPLC Method (OECD Test Guideline 117)
(G) Carbomonocyclic substituted heteromonocyclic, salt with carbopolycyclic sulfocarboxylate.
P-25-0127
03/17/2026
Dissociation Constants in Water (OECD Test Guideline 112); photo transformation of Chemicals in Water—Direct Photolysis (OECD Test Guideline 316); Partition Coefficient (n-Octanol/Water), HPLC Method (OECD Test Guideline 117)
(G) Carbomonocyclic sulfonium, salt with carbopolycyclic sulfocarboxylate.
P-26-0071
03/20/2026
Defined Approaches on Skin Sensitization (OECD Test Guideline 497); Mammalian Erythrocyte Micronucleus Test (OECD Test Guideline 474); Reconstructed Human Cornea-Like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage (OECD Test Guideline 492); In Vitro Skin Sensitization (OECD Test Guideline 442D); Freshwater Alga and Cyanobacteria, Growth Inhibition Test (OECD Test Guideline 201); Daphnia sp. Acute Immobilisation Test (OECD Test Guideline 202); Fish, Acute Toxicity Test (OECD Test Guideline 203); Ready Biodegradability, Closed Bottle Method (OECD Test Guideline 301D); Inherent Biodegradability (OECD Test Guideline 302); Estimation of the Adsorption Coefficient (Koc ) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC) (OECD Test Guideline 121); Partition Coefficient (1-Octanol/Water): Slow-Stirring Method (OECD Test Guideline 123); Water Solubility (OECD Test Guideline 105); Skin Irritation Testing; Worker Exposure Assessment; General Population Exposure Assessment Case Scenario; PBT Assessment. Bacterial Reverse Mutation Test (OECD Test Guideline 471); Acute Inhalation Toxicity (OECD Test Guideline 403); Subacute Inhalation Toxicity: 28-Day Study (OECD Test Guideline 412); Prenatal Developmental Toxicity Study (OECD Test Guideline 414); Reproduction/Developmental Toxicity Screening Test (OECD Test Guideline 421); Acute Inhalation Toxicity (OECD Test Guideline 403); In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method (OECD Test Guideline 439); In vitro Mammalian Cell Gene Mutation Test (OECD Test Guideline 476)
(S) 3-Hexene, 1,1,1,2,2,5,5,6,6,6-decafluoro-, (3E).
Use this for formal legal and research references to the published document.
91 FR 35976
Web Citation
Suggested Web Citation
Use this when citing the archival web version of the document.
“Certain New Chemicals; Receipt and Status Information for February and March 2026,” thefederalregister.org (June 15, 2026), https://thefederalregister.org/documents/2026-11943/certain-new-chemicals-receipt-and-status-information-for-february-and-march-2026.