Document

Certain Carbon and Alloy Steel Cut-to-Length Plate From France: Preliminary Results of Antidumping Duty Administrative Review; 2024-2025

The U.S. Department of Commerce (Commerce) preliminarily determines that Dillinger France S.A. (Dillinger) did not make sales of subject merchandise at less than normal value (N...

Department of Commerce
International Trade Administration
  1. [A-427-828]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) preliminarily determines that Dillinger France S.A. (Dillinger) did not make sales of subject merchandise at less than normal value (NV) during the period of review (POR), May 1, 2024 through April 30, 2025. Interested parties are invited to comment on these preliminary results of review.

DATES:

Applicable July 21, 2026.

FOR FURTHER INFORMATION CONTACT:

Christopher Doyle, AD/CVD Operations, Office IX, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5882.

SUPPLEMENTARY INFORMATION:

Background

On June 25, 2025, based on timely requests for review, in accordance with 19 CFR 351.221(c)(1)(i), we initiated an administrative review of the antidumping duty order on certain carbon and alloy steel cut-to-length plate (CTL plate) from France.[1] This review covers one producer/exporter of the subject merchandise, Dillinger.

Due to the lapse in appropriations and Federal Government shutdown, on November 14, 2025, Commerce tolled all deadlines in administrative proceedings by 47 days,[2] and, due to a backlog of documents that were electronically filed via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS) during the Federal Government shutdown, on November 24, 2025, Commerce tolled all deadlines in administrative proceedings by an additional 21 days.[3] In March 2026, we extended the preliminary results of this review.[4] Further, in May 2026, we extended the preliminary results of this review to no later than July 15, 2026.[5]

For a complete description of the events that followed the initiation of this review, see the Preliminary Decision Memorandum.[6] A list of the ( printed page 45792) topics discussed in the Preliminary Decision Memorandum is attached as an appendix to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via ACCESS, which is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/​frnotices.

Scope of the Order

The merchandise subject to the Order is CTL plate from France. For a complete description of the scope of the Order, see the Preliminary Decision Memorandum.

Methodology

Commerce is conducting this review in accordance with section 751(a) of the Tariff Act of 1930, as amended (the Act). Export price is calculated in accordance with section 772 of the Act. NV is calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum.

Preliminary Results of Review

As a result of this review, we preliminarily determine the following estimated weighted-average dumping margin exists for the period May 1, 2024, through April 30, 2025:

Producer/exporter Weighted- average dumping margin (percent)
Dillinger France S.A 0.00

Disclosure

Commerce intends to disclose its calculations performed to interested parties for these preliminary results within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance. Pursuant to 19 CFR 351.309(c)(1)(ii), we have modified the deadline for interested parties to submit case briefs to Commerce to no later than 21 days after the date of the publication of this notice.[7] Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs.[8] Interested parties who submit case briefs or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities.[9] All briefs must be filed electronically using ACCESS. An electronically filed document must be received successfully in its entirety in ACCESS by 5:00 p.m. Eastern Time on the established deadline.

As provided under 19 CFR 351.309(c)(2)(iii) and (d)(2)(iii), we request that interested parties provide at the beginning of their briefs a public executive summary for each issue raised in their briefs.[10] Further, we request that interested parties limit their public executive summary of each issue to no more than 450 words, not including citations. We intend to use the public executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final results in this administrative review. We request that interested parties include footnotes for relevant citations in the public executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).[11]

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance, filed electronically via ACCESS by 5:00 p.m. Eastern Time within 30 days after the date of publication of this notice. Requests should contain: (1) the party's name, address, and telephone number; (2) the number of participants; and (3) a list of issues to be discussed. Oral presentations at the hearing will be limited to issues raised in the briefs. If a request for a hearing is made, Commerce will inform parties of the scheduled date for the hearing.[12]

Assessment Rates

Pursuant to section 751(a)(2)(A) of the Act and 19 CFR 351.212(b)(1), Commerce will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.

If Dillinger's weighted-average dumping margin is not zero or de minimis ( i.e., less than 0.50 percent) in the final results of this review, Commerce intends to calculate importer-specific assessment rates on the basis of the ratio of the total amount of dumping calculated for each importer's examined sales to the total entered value of those sales. Where we do not have entered values for all U.S. sales to a particular importer, we will calculate an importer-specific, per-unit assessment rate on the basis of the ratio of the total amount of dumping calculated for the importer's examined sales to the total quantity of those sales.[13] To determine whether an importer-specific, per-unit assessment rate is de minimis, in accordance with 19 CFR 351.106(c)(2), we also will calculate an importer-specific ad valorem ratio based on estimated entered values. If Dillinger's weighted-average dumping margin is zero or de minimis or where an importer-specific ad valorem assessment rate is zero or de minimis, we will instruct CBP to liquidate appropriate entries without regard to antidumping duties.[14]

In accordance with Commerce's “automatic assessment” practice, for entries of subject merchandise during the POR produced by Dillinger for which it did not know that the merchandise was destined for the United States, we intend to instruct CBP to liquidate those entries at the all-others rate calculated in the less-than-fair-value (LTFV) investigation if there is no rate for the intermediate company(ies) involved in the transaction.[15]

If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication). ( printed page 45793)

Cash Deposit Requirements

The following deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) the cash deposit rate for the company listed above will be that established in the final results of this review, except if the rate is less than 0.50 percent and, therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; (2) for previously investigated or reviewed companies not covered by this review, the cash deposit rate will continue to be the company-specific cash deposit rate published for the most recently completed segment of this proceeding in which the company participated; (3) if the exporter is not a firm covered in this review, or the LTFV investigation, but the manufacturer is, then the cash deposit rate will be the rate established for the most recent segment for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 6.15 percent, the all-others rate established in the LTFV investigation.[16] These cash deposit requirements, when imposed, shall remain in effect until further notice.

Final Results of Review

Unless otherwise extended, Commerce intends to issue the final results of this administrative review, including the results of its analysis of the issues raised in any written briefs, not later than 120 days after the date of publication of this notice, pursuant to section 751(a)(3)(A) of the Act and 19 CFR 351.213(h)(1).

Notification to Importers

This notice also serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification to Interested Parties

We are issuing and publishing these preliminary results of review in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(4).

Dated: July 15, 2026.

Christopher Abbott,

Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. Discussion of the Methodology

V. Recommendation

Footnotes

1.   See Initiation of Antidumping and Countervailing Duty Administrative Reviews,90 FR 26967 (June 25, 2025); see also Certain Carbon and Alloy Steel Cut-To-Length Plate from Austria, Belgium, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, and Taiwan: Amended Final Affirmative Antidumping Determinations for France, the Federal Republic of Germany, the Republic of Korea and Taiwan, and Antidumping Duty Orders,82 FR 24096 (May 25, 2017) ( Order).

Back to Citation

2.   See Memorandum, “Deadlines Affected by the Shutdown of the Federal Government,” dated November 14, 2025.

Back to Citation

3.   See Memorandum, “Tolling of all Case Deadlines,” dated November 24, 2025.

Back to Citation

4.   See Memorandum, “Extension of Deadline for Preliminary Results of 2024-2025 Antidumping Administrative Review,” dated March 18, 2026.

Back to Citation

5.   See Memorandum, “Extension of Deadline for Preliminary Results of 2024-2025 Antidumping Administrative Review,” dated May 12, 2026.

Back to Citation

6.   See Memorandum, “Decision Memorandum for the Preliminary Results of the Administrative Review of the Antidumping Duty Order on Certain Carbon and Alloy Steel Cut-to-Length Plate from France; 2024-2025,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

Back to Citation

8.   See 19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings,88 FR 67069, 67077 (September 29, 2023) ( APO and Service Procedures).

Back to Citation

10.  We use the term “issue” here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.

Back to Citation

11.   See APO and Service Procedures.

Back to Citation

14. See 19 CFR 351.106(c)(2); see also Antidumping Proceeding: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Proceedings; Final Modification,77 FR 8101, 8103 (February 14, 2012).

Back to Citation

15. For a full discussion of this practice, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties,68 FR 23954 (May 6, 2003).

Back to Citation

16.   See Order.

Back to Citation

[FR Doc. 2026-14628 Filed 7-20-26; 8:45 am]

BILLING CODE 3510-DS-P

Legal Citation

Federal Register Citation

Use this for formal legal and research references to the published document.

91 FR 45791

Web Citation

Suggested Web Citation

Use this when citing the archival web version of the document.

“Certain Carbon and Alloy Steel Cut-to-Length Plate From France: Preliminary Results of Antidumping Duty Administrative Review; 2024-2025,” thefederalregister.org (July 21, 2026), https://thefederalregister.org/documents/2026-14628/certain-carbon-and-alloy-steel-cut-to-length-plate-from-france-preliminary-results-of-antidumping-duty-administrative-re.