SUPPLEMENTARY INFORMATION:

Background

On April 15, 2026, Commerce published the Preliminary Results of this administrative review in the Federal Register and invited interested parties to comment.^[1] No interested party submitted comments. Thus, Commerce made no changes from the Preliminary Results, which are herein adopted as the final results of review. Additionally, because these final results remain unchanged from the Preliminary Results, no decision memorandum ( printed page 51663) accompanies this notice. Commerce conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).

Scope of the Order ^[2]

The products covered by the Order are aluminum extrusions from China. For a complete description of the scope of the Order, see the appendix to this notice.

Use of Adverse Facts Available (AFA)

As discussed in the Preliminary Results, we assigned the six non-responsive companies a net countervailable subsidy rate based entirely on AFA, pursuant to sections 776(a) and (b) of the Act.^[3] There is no new information on the record that would cause us to revisit our decision in the Preliminary Results. Accordingly, for these final results, we continue to find that the application of AFA pursuant to sections 776(a) and (b) of the Act is warranted with respect to the non-responsive companies.

Final Results of Administrative Review

As a result of this review, we determine the following net countervailable subsidy rates exist for the POR, January 1, 2024, through December 31, 2024:

Disclosure

Normally, Commerce discloses to interested parties the calculations performed in the final results within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of the notice of final determination in the Federal Register , in accordance with 19 CFR 351.224(b). However, because we made no changes from the Preliminary Results, there are no new calculations to disclose.

Assessment

Consistent with sections 751(a)(1) and (a)(2)(C) of the Act and 19 CFR 351.212(b)(2), Commerce has determined, and U.S. Customs and Border Protection (CBP) shall assess, countervailing duties on all appropriate entries covered by this review. Commerce intends to issue assessment instructions to CBP regarding the companies listed above no earlier than 35 days after the publication of the final results of this review in the Federal Register . If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication).

Cash Deposit Instructions

Pursuant to section 751(a)(2)(C) of the Act and 19 CFR 351.107(e), Commerce intends to instruct CBP to collect cash deposits of estimated countervailing duties with regard to shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of the final results of this administrative review, as follows: (1) the cash deposit rate for the companies listed above will be equal to the company-specific estimated individual countervailable subsidy rates determined in the final results of this review, except if the rate is less than 0.50 percent and, therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; (2) if both the producer and exporter of the subject merchandise have company-specific estimated subsidy rates assigned, and their rates differ, then the applicable cash deposit rate will be the higher of these two rates; (3) if either the producer or the exporter, but not both, of the subject merchandise has a company-specific estimated subsidy rate assigned, the applicable cash deposit rate will be that company's company-specific rate; and (4) the cash deposit rate for all other producers and exporters will be continue to be 7.37 percent, the all-others subsidy rate established in the investigation.^[4] These cash deposit requirements, effective upon publication of these final results, shall remain in effect until further notice.

Administrative Protective Order (APO)

This notice serves as a final reminder to parties subject to an APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.

Notification to Interested Parties

We are issuing and publishing these final results in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(5).

Appendix

Scope of the Order

The merchandise covered by this Order is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by the Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99 percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3 contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter. Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060. Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope. ( printed page 51664)

Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished ( i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof. Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached ( e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods `kit' defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.

Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation.

The following aluminum extrusion products are excluded: aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight. The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a “finished goods kit.” A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled “as is” into a finished product. An imported product will not be considered a “finished goods kit” and therefore excluded from the scope of the Order merely by including fasteners such as screws, bolts, etc. in the packaging with an aluminum extrusion product.

The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form.

The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) length of 37 millimeters (“mm”) or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm. Also excluded from the scope of this Order are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements. Also excluded from the scope of the Order is certain rectangular wire produced from continuously cast rolled aluminum wire rod, which is subsequently extruded to dimension to form rectangular wire. The product is made from aluminum alloy grade 1070 or 1370, with no recycled metal content allowed. The dimensions of the wire are 5 mm (+/−0.05 mm) in width and 1.0 mm (+/- 0.02 mm) in thickness. Imports of rectangular wire are provided for under HTSUS category 7605.19.000.

Imports of the subject merchandise are provided for under the following categories of the Harmonized Tariff Schedule of the United States (HTSUS): 7606.12.3091, 7606.12.3096, 7604.21.0010, 7604.21.0090, 7604.29.1010, 7604.29.1090, 7604.29.3060; 7604.29.3090; 7604.29.5050; 7604.29.5090; 8541.90.00.00, 8708.10.30.50, 8708.99.68.90, 6603.90.8100, 7616.99.51, 8479.89.94, 8481.90.9060, 8481.90.9085, 9031.90.9195, 8424.90.9080, 9405.99.4020, 9031.90.90.95, 7616.10.90.90, 7609.00.00, 7610.10.00, 7610.90.00, 7615.10.30, 7615.10.71, 7615.10.91, 7615.19.10, 7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 7616.99.10, 7616.99.50, 8479.89.98, 8479.90.94, 8513.90.20, 9403.10.00, 9403.20.00, 7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 7604.29.30.50, 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90, 8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35, 8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60, 8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 8473.30.51.00, 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 8536.90.80.85, 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 9401.90.50.81, 9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 9507.90.60.00, and 9603.90.80.50.

The subject merchandise entered as parts of other aluminum products may be classifiable under the following additional Chapter 76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as well as under other HTSUS chapters. In addition, fin evaporator coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 8418.99.80.60. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this Order is dispositive.

91 FR 51662