SUPPLEMENTARY INFORMATION:

Background

On May 14, 2021, Commerce published in the Federal Register the AD orders on mattresses from Cambodia, Malaysia, Serbia, Thailand, the Republic of Türkiye, and the Socialist Republic of Vietnam, and the CVD order on mattresses from the People's Republic of China.^[1] On April 1, 2026, the ITC instituted,^[2] and ( printed page 70842) Commerce initiated,^[3] the first sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping likely to prevail should the Orders be revoked.^[4]

On October 27, 2026, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.^[5]

Scope of the Orders

The products covered by these Orders are all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses may also contain: (1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress; or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or (2) “ticking,” the outermost layer of fabric or other material ( e.g., vinyl) that encloses the core and any upholstery, also known as a cover.

The scope of these Orders is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of size and size description.

The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units.

“Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams ( e.g., polyurethane, memory (viscoelastic), latex foam, gel-infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling.

Mattresses covered by the scope of these Orders may be imported independently, as part of furniture or furniture mechanisms ( e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set in combination with a “mattress foundation.” “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set in combination with a mattress foundation.

Excluded from the scope of these Orders are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon.

Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress.

Also excluded is certain multifunctional furniture that is convertible from seating to sleeping, regardless of filler material or components, where that filler material or components are upholstered, integrated into the design and construction of, and inseparable from, the furniture framing, and the outermost layer of the multifunctional furniture converts into the sleeping surface. Such furniture may, and without limitation, be commonly referred to as “convertible sofas,” “sofabeds,” “sofa chaise sleepers,” “futons,” “ottoman sleepers” or a like description.

Also excluded from the scope of these Orders are any products covered by the existing antidumping duty orders on uncovered innerspring units from China or Vietnam. See Uncovered Innerspring Units from the People's Republic of China: Notice of Antidumping Duty Order,74 FR 7661 (February 19, 2009); Antidumping Duty Order: Uncovered Innerspring Units from the Socialist Republic of Vietnam,73 FR 75391 (December 11, 2008).

Also excluded from the scope of these Orders are bassinet pads with a nominal length of less than 39 inches, a nominal width less than 25 inches, and a nominal depth of less than 2 inches.

Additionally, also excluded from the scope of these Orders are “mattress toppers.” A “mattress topper” is a removable bedding accessory that supplements a mattress by providing an additional layer that is placed on top of a mattress. Excluded mattress toppers have a height of four inches or less.

The products subject to these Orders are currently properly classifiable under HTSUS subheadings: 9404.21.0010, 9404.21.0013, 9404.29.1005, 9404.29.1013, 9404.29.9085, and 9404.29.9087. Products subject to these Orders may also enter under HTSUS subheadings: 9404.21.0095, 9404.29.1095, 9404.29.9095, 9401.40.0000, and 9401.90.5081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise covered by these Orders is dispositive.

Continuation of the Orders

As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. ( printed page 70843)

The effective date of the continuation of the Orders will be October 27, 2026.^[6] Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to fifth anniversary of the date of the last determination by the ITC.

Administrative Protective Order (APO)

This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

Notification to Interested Parties

These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4).

91 FR 70841