Diamond Sawblades and Parts Thereof From the People's Republic of China: Continuation of Antidumping Duty Order
As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) or...
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) order on diamond sawblades and parts thereof (diamond sawblades) from the People's Republic of China (China) would likely lead to the continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing a notice of continuation of this AD order.
DATES:
Applicable October 30, 2026.
FOR FURTHER INFORMATION CONTACT:
Yang Jin Chun, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5760.
SUPPLEMENTARY INFORMATION:
Background
On November 4, 2009, Commerce published in the
Federal Register
the AD order on diamond sawblades from China.[1]
On March 2, 2026, the ITC instituted,[2]
and Commerce initiated,[3]
the third sunset review of the
Order,
pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its review, Commerce determined that revocation of the
Order
would likely lead to the continuation or recurrence of dumping, and therefore, notified the ITC of the magnitude of the margins of dumping likely to prevail should the
Order
be revoked.[4]
On October 30, 2026, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the
Order
would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.[5]
Scope of the Order
The products covered by this
Order
are all finished circular sawblades, whether slotted or not, with a working part that is comprised of a diamond segment or segments, and parts thereof, regardless of specification or size, except as specifically excluded below. Within the scope of the
Order
are semi-finished diamond sawblades, including diamond sawblade cores and diamond sawblade segments. Diamond sawblade cores are circular steel plates, whether or not attached to non-steel plates, with slots. Diamond sawblade cores are manufactured principally, but not exclusively, from alloy steel. A diamond sawblade segment consists of a mixture of diamonds (whether natural or synthetic, and regardless of the quantity of diamonds) and metal powders (including, but not limited to, iron, cobalt, nickel, tungsten carbide) that are formed together into a solid shape (from generally, but not limited to, a heating and pressing process).
Sawblades with diamonds directly attached to the core with a resin or electroplated bond, which thereby do not contain a diamond segment, are not included within the scope of this
Order.
Diamond sawblades and/or sawblade cores with a thickness of less than 0.025 inches, or with a thickness greater than 1.1 inches, are excluded from the scope of this
Order.
Circular steel plates that have a cutting edge of non-diamond material, such as external teeth that protrude from the outer diameter of the plate, whether or not finished, are excluded from the scope of this
Order.
Diamond sawblade cores with a Rockwell C hardness of less than 25 are excluded from the scope of this
Order.
Diamond sawblades and/or diamond segment(s) with diamonds that predominantly have a mesh size number greater than 240 (such as 250 or 260) are excluded from the scope of this
Order.
Merchandise subject to the order is typically imported under heading 8202.39.00.00 of the Harmonized Tariff Schedule of the United States (HTSUS). When packaged together as a set for retail sale with an item that is separately classified under headings 8202 to 8205 of the HTSUS, diamond sawblades or parts thereof may be imported under heading 8206.00.00.00 of the HTSUS. On October 11, 2011, Commerce included the 6804.21.00.00 HTSUS classification number to the customs case reference file, pursuant to a request by U.S. Customs and Border Protection (CBP).[6]
Pursuant to requests by CBP, Commerce included to the customs case reference file the following HTSUS classification numbers: 8202.39.0040 and 8202.39.0070 on January 22, 2015, and 6804.21.0010 and 6804.21.0080 on January 26, 2015.[7]
The tariff classification is provided for convenience and customs purposes; however, the written description of the scope of this
Order
is dispositive.
Continuation of the Order
As a result of the determinations by Commerce and the ITC that revocation of the
Order
would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the
Order.
U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.
The effective date of the continuation of the
Order
will be October 30, 2026.[8]
Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the
Order
not later than 30
( printed page 73552)
days prior to fifth anniversary of the date of the last determination by the ITC.
Administrative Protective Order
This notice also serves as a final reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
Notification to Interested Parties
This five-year (sunset) review and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4).
Dated: November 10, 2026.
Scot Fullerton,
Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations.
Footnotes
1.
See Diamond Sawblades and Parts Thereof from the People's Republic of China and the Republic of Korea: Antidumping Duty Orders,74 FR 57145 (November 4, 2009).
4.
See Diamond Sawblades and Parts Thereof from the People's Republic of China: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order,91 FR 40976 (July 6, 2026), and accompanying Issues and Decision Memorandum (IDM).
6.
See Diamond Sawblades and Parts Thereof from the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review,76 FR 76128 (December 6, 2011).
7.
See Diamond Sawblades and Parts Thereof from the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2016-2017,83 FR 64331 (December 14, 2018), and accompanying IDM at 3.
Use this for formal legal and research references to the published document.
91 FR 73551
Web Citation
Suggested Web Citation
Use this when citing the archival web version of the document.
“Diamond Sawblades and Parts Thereof From the People's Republic of China: Continuation of Antidumping Duty Order,” thefederalregister.org (November 16, 2026), https://thefederalregister.org/documents/2026-23253/diamond-sawblades-and-parts-thereof-from-the-people-s-republic-of-china-continuation-of-antidumping-duty-order.