SGS North America, Inc.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for SGS North America, Inc. as a Nationally Recognized Testing Laboratory (NRTL).
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Notice.
SUMMARY:
In this notice, OSHA announces the final decision to expand the scope of recognition for SGS North America, Inc. as a Nationally Recognized Testing Laboratory (NRTL).
DATES:
The expansion of the scope of recognition becomes effective on November 17, 2026.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries:
Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, phone: (202) 693-1000 ext. 11847 or email:
meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, phone: (202) 693-1000 ext. 11538 or email:
robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of recognition of SGS North America, Inc. (SGS) as a NRTL. SGS's expansion covers the addition of two test standards to the NRTL scope of recognition.
OSHA's recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes: (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.
The agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the
Federal Register
in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the agency provides a final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including SGS, which details the NRTL's scope of recognition. These pages are available from the OSHA website at
www.osha.gov/dts/otpca/nrtl/index.html.
SGS submitted two applications to OSHA for expansion of the NRTL scope of recognition: the first application dated January 9, 2025 (OSHA-2006-0040-0097) requested the addition of one test standard, and the second application dated July 18, 2025 (OSHA-2006-0040-0096) requesting the addition of another test standard. In total, the expansion applications requested the addition of two test standards to the NRTL scope of recognition. OSHA staff performed a detailed analysis of the application packets and reviewed other pertinent information. OSHA did not perform an on-site review in response to these applications. OSHA staff preliminarily determined that OSHA should grant the applications for test standard expansion.
OSHA published the preliminary notice announcing SGS's expansion applications in the
Federal Register
on August 21, 2026 (91 FR 54402). The agency requested comments by September 8, 2026, but it received no comments in response to this notice.
To obtain or review copies of all public documents pertaining to the SGS application, go to
www.regulations.gov
or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department
( printed page 73815)
of Labor. Docket No. OSHA-2006-0040 contains all materials in the record concerning SGS's recognition. Contact the OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627) for assistance in locating docket submissions.
II. Final Decision and Order
OSHA staff examined SGS's expansion applications and examined other pertinent information. Based on its review of this evidence, OSHA finds that SGS meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant SGS's expanded scope of recognition. OSHA limits the expansion of SGS's recognition to include the two additional testing standards. OSHA grants SGS expansion of the NRTL scope of recognition to include the test standards listed below in Table 1.
Table 1—List of Appropriate Test Standards for Inclusion in SGS's NRTL Scope of Recognition
Test standard
Test standard title
UL 1340
Hoists.
UL 2056
Power Banks.
OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7, SGS must abide by the following conditions of the NRTL recognition:
1. SGS must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);
2. SGS must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and
3. SGS must continue to meet the requirements for recognition, including all previously published conditions on SGS's scope of recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of SGS as a NRTL, subject to the limitations and conditions specified above.
III. Authority and Signature
Amanda Laihow, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 7-2025 (90 FR 27878; June 30, 2025), and 29 CFR 1910.7.
Signed at Washington, DC, on October 8, 2026.
Amanda Laihow,
Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health.
Use this for formal legal and research references to the published document.
91 FR 73814
Web Citation
Suggested Web Citation
Use this when citing the archival web version of the document.
“SGS North America, Inc.: Grant of Expansion of Recognition,” thefederalregister.org (November 17, 2026), https://thefederalregister.org/documents/2026-23314/sgs-north-america-inc-grant-of-expansion-of-recognition.