Document

Hardwood and Decorative Plywood From the People's Republic of China, Indonesia, and the Socialist Republic of Vietnam: Antidumping Duty Orders

Based on affirmative final determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC), Commerce is issuing antidumping duty (...

Department of Commerce
International Trade Administration
  1. [A-570-211, A-560-844, A-552-851]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

Based on affirmative final determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC), Commerce is issuing antidumping duty (AD) orders on hardwood and decorative plywood from the People's Republic of China (China), Indonesia, and the Socialist Republic of Vietnam (Vietnam).

DATES:

Applicable November 17, 2026.

FOR FURTHER INFORMATION CONTACT:

Preston Cox at (240) 956-8630 (China), Joy Zhang at (202) 482-1168 (Indonesia), and Bobby Shore at (202) 482-3261 (Vietnam), AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Background

On July 21, 2026, Commerce published in the Federal Register its affirmative final determinations in the less-than-fair-value (LTFV) investigations of hardwood and decorative plywood from China, Indonesia, and Vietnam in accordance with sections 735(d) and 777(i) of the Tariff Act of 1930, as amended (the Act).[1]

The scope of the investigation in Commerce's final determination covered hardwood and decorative plywood and certain veneered panels.[2] As discussed below, the ITC found three domestic like products: hardwood and decorative plywood, stamped and certified ( printed page 73740) softwood structural plywood, and softwood structural plywood downfall. On September 4, 2026, the ITC notified Commerce of its final determinations, pursuant to section 735(d) of the Act, that an industry in the United States is materially injured within the meaning of section 735(b)(1)(A)(i) of the Act by reason of LTFV imports of hardwood and decorative plywood from China, Indonesia, and Vietnam.[3] Additionally, the ITC found that imports of stamped and certified softwood structural plywood and of softwood structural plywood downfall are negligible and, therefore, terminated the LTFV investigations for these products.[4]

On September 17, 2026, Commerce released draft revised scope language for comment by parties.[5] On September 23, 2026, we received comments from the Coalition for Fair Trade in Hardwood Plywood (the petitioner) and certain importers and exporters of the merchandise under investigation.[6] Based on these comments, we released a second version of the draft revised scope language, which included a certification program, for comment on October 8, 2026.[7] On October 14, 2026, we received comments on the second draft scope language from the petitioner and certain importers and exporters of the merchandise under investigation.[8]

Scope of the Orders

The products covered by these orders are hardwood and decorative plywood from China, Indonesia, and Vietnam. For a complete description of the scope of the orders, see the appendix to this notice.

Scope Comments

As stated above, subsequent to the ITC Final Determination, we released draft revised scope language and received comments on these drafts from the petitioner and certain importers and exporters of the merchandise under investigation.[9] For a summary of the scope comments submitted by interested parties, and accompanying discussion and analysis of all comments timely received, see the Order Scope Memorandum, issued concurrently with these orders.[10] We note that several parties commented on whether to implement a certification program for certain modifications made to the scope based on the ITC Final Determination. Commerce intends address those comments in a changed circumstances review under section 751(b) of the Act and 19 CFR 351.216 at a later date.

Antidumping Duty Orders

On September 4, 2026, in accordance with sections 735(b)(1)(A)(i) and 735(d) of the Act, the ITC notified Commerce of its final determinations that an industry in the United States is materially injured by reason of LTFV imports of hardwood and decorative plywood from China, Indonesia, and Vietnam.[11] As a result, and in accordance with section 735(c)(2) and 736 of the Act, Commerce is issuing these AD orders. As noted above, the ITC found three domestic like products: hardwood and decorative plywood, stamped and certified softwood structural plywood, and softwood structural plywood downfall. The ITC found that imports of softwood structural plywood downfall and stamped and certified softwood structural plywood are negligible. The ITC made an affirmative determination with respect to hardwood and decorative plywood from China, Indonesia, and Vietnam. Because the ITC made distinct and different injury determinations for separate domestic like products, Commerce will instruct Customs and Border Protection (CBP) to assess antidumping duties on entries of hardwood and decorative plywood (subject merchandise) from China, Indonesia, and Vietnam, and not on entries of stamped and certified softwood structural plywood or softwood structural plywood downfall from China, Indonesia, and Vietnam.

Hardwood and Decorative Plywood

The ITC describes hardwood and decorative plywood as a plywood product in which at least either the face or back veneer is composed of one or more species of hardwood and/or softwood. Because the ITC determined that LTFV imports of hardwood and decorative plywood from China, Indonesia, and Vietnam are materially injuring a U.S. industry,[12] Commerce will direct CBP that all unliquidated entries of hardwood and decorative plywood from China, Indonesia, and Vietnam entered, or withdrawn from warehouse, are subject to the assessment of antidumping duties pursuant to section 736 of the Act. Specifically, as a result of the ITC Final Determinations, in accordance with section 736(a) of the Act, Commerce will direct CBP to assess, upon further instruction by Commerce, antidumping duties for all relevant entries of hardwood and decorative plywood from China, Indonesia, and Vietnam. Antidumping duties will be assessed on unliquidated entries of hardwood and decorative plywood from China, Indonesia, and Vietnam entered, or withdrawn from warehouse, for consumption on or after March 2, 2026, the date of publication of the Preliminary Determinations, but will not include entries occurring after the expiration of the provisional measures period and before the publication of the ITC Final Determinations, under section 735(b) of the Act, as further described in the “Provisional Measures” section of this notice.[13]

( printed page 73741)

Stamped and Certified Softwood Structural Plywood

The ITC describes stamped and certified softwood structural plywood as all stamped and certified softwood structural plywood regardless of core composition.[14] Because the ITC determined that all imports of stamped and certified softwood structural plywood from China, Indonesia, and Vietnam are negligible, Commerce will direct CBP to terminate the suspension of liquidation for entries of stamped and certified softwood structural plywood from China, Indonesia, and Vietnam that were not previously excluded from the scope of the investigations. Specifically, Commerce will instruct CBP to terminate the suspension of liquidation of shipments of stamped and certified softwood structural plywood that is certified, manufactured, and stamped to meet U.S. Products Standard PS-1-22 or PS 2-18 for Structural Plywood (including any revisions to those standards, or to a foreign structural plywood standard that Commerce has determined, in a scope ruling or other proceeding, to be substantially equivalent to PS-1-22 or PS 2-18) from China, Indonesia, and Vietnam entered, or withdrawn from warehouse on or after March 2, 2026 (the date of the Preliminary Determination), and refund all cash deposits with respect to those entries pursuant to section 735(c)(2) of the Act.

Softwood Structural Plywood Downfall

The ITC describes softwood structural plywood downfall as plywood that was intended to be stamped and certified softwood structural plywood but did not obtain certification due to manufacturing defects.[15] Because the ITC determined that imports of softwood structural plywood downfall from China, Indonesia, and Vietnam are negligible, Commerce will direct CBP to terminate the suspension of liquidation for entries of softwood structural plywood downfall from China, Indonesia, and Vietnam. Specifically, Commerce will instruct CBP to terminate the suspension of liquidation of entries of plywood panels manufactured at a facility certified to produce structural plywood to PS 1-22 or PS 2-18 standards (or a Commerce-determined equivalent foreign standard), where the specific panels at issue were produced as part of a production run intended to meet such standards but did not receive the certifying agency's stamp or mark because they failed to meet the applicable bond performance, veneer grade, or other qualifying criteria of that standard from China, Indonesia, and Vietnam entered, or withdrawn from warehouse on or after March 2, 2026 (the date of the Preliminary Determination), and to refund all cash deposits with respect to these entries pursuant to section 735(c)(2) of the Act.

Critical Circumstances—AD

In addition, the ITC found that critical circumstances do not exist with respect to imports of merchandise subject to this investigation from China. As a result, we instructed CBP to lift the suspension of liquidation and to refund all cash deposits for estimated antidumping duties with respect to entries of merchandise suspended by reason of our affirmative critical circumstances determination that were entered, or withdrawn from warehouse, for consumption on or after December 2, 2025, ( i.e., 90 days prior to the date of publication of the affirmative LTFV Preliminary Determinations), but before March 2, 2026 ( i.e., the date of publication of the LTFV Preliminary Determinations).

Suspension of Liquidation and Cash Deposits

Except as noted in the “Provisional Measures” section of this notice, in accordance with section 736 of the Act, Commerce intends to instruct CBP to continue to suspend liquidation on all relevant entries of hardwood and decorative plywood from China, Indonesia, and Vietnam, effective on the date of publication of the ITC Final Determinations in the Federal Register . These instructions suspending liquidation will remain in effect until further notice.

Commerce also intends to instruct CBP to require cash deposits equal to the estimated weighted-average dumping margins, with offsets for export subsidies where appropriate, as indicated in the tables below. Accordingly, effective on the date of publication in the Federal Register of the ITC Final Determinations, CBP will suspend the liquidation of entries of subject merchandise, and require, at the same time that importers would normally deposit estimated duties on the merchandise, a cash deposit equal to the rates listed below. The relevant China-wide entity, Vietnam-wide entity, and all-others rates apply to all producers or exporters not specifically listed, as appropriate.

Estimated Weighted-Average Dumping Margins

The estimated weighted-average dumping margins are as follows:

China

Producer Exporter Weighted-average dumping margin (percent) Cash deposit rate (adjusted for subsidy offsets) (percent)
Linyi Xinshancheng Board Factory Linyi Hanbo Import Co., Ltd 187.27 185.96
Feixian Yukang Board Factory Linyi Hanbo Import Co., Ltd 187.27 185.96
Feixian Jialun Board Factory Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Feixian Shuxin Board Factory Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Feixian Dongining Board Factory Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Linyi Jillklm Wood Industry Co., Ltd Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Linyi Linhai Wood Industry Co., Ltd Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Linyi Lanshan District Caihai Board Factory Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Feixian Haokai Wood Industry Co., Ltd Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Feixian Chenhui Board Factory Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Xuzhou Dingfeng Wood Industry Co., Ltd Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Fengxian Shuangxingyuan Wood Industry Co., Ltd Shanghai Brightwood Trading Co., Ltd 187.27 185.96
Shandong Yimeijia New Materials Co., Ltd Lianyungang Yuantai International Trade Co., Ltd 187.27 185.96
Feixian Jialun Board Factory Lianyungang Yuantai International Trade Co., Ltd 187.27 185.96
( printed page 73742)
Linyi Dongfang Fuchao Wood Industry Co., Ltd Lianyungang Yuantai International Trade Co., Ltd 187.27 185.96
Linyi Xinshancheng Wood Co., Ltd Linyi Vata Imp. & Exp. Co., Ltd 187.27 185.96
China-Wide Entity 16 * 187.27 185.96
* Rate based on facts available with adverse inferences.

Indonesia

Exporter or producer Weighted-average dumping margin (percent) Cash deposit rate (adjusted for subsidy offset(s)) (percent)
PT Wijaya Cahaya Timber TBK/PT Wijaya Triutama Plywood Industri 15.40 15.39
PT Sengon Indah Mas/PT Java Wood Industri 23.88 23.78
PT. Mustika Buana Sejahtera * 84.94 84.94
All Others 18.10 18.06
* Rate based on facts available with adverse inferences.

 

Vietnam

Producer Exporter Weighted-average dumping margin (percent) Cash deposit rate (adjusted for subsidy offsets) (percent)
Junma Phu Tho Co., Ltd Junma Phu Tho Co., Ltd 90.12 84.95
Nhat Duy Production and Trading Co., Ltd./Trieu Thai Son Co., Ltd Nhat Duy Production and Trading Co., Ltd./Trieu Thai Son Co., Ltd 90.12 84.95
186 Yen Bai Producing and Trading Co., Ltd 186 Yen Bai Producing and Trading Co., Ltd 90.12 84.95
A-One Timber Co., JSC A-One Timber Co., JSC 90.12 84.95
An An Plywood Joint Stock Company An An Plywood Joint Stock Company 90.12 84.95
Chien Linh Ngan Trading and Manufacturing Company Limited An My Packaging Production Limited Liability Company 90.12 84.95
Ly Hai Linh Company Limited An My Packaging Production Limited Liability Company 90.12 84.95
Benchmark Industries Company Limited Benchmark Industries Company Limited 90.12 84.95
Bison Advance Technology Panel Joint Stock Company Bison Advance Technology Panel Joint Stock Company 90.12 84.95
C-Holding Wood Company Limited C-Holding Wood Company Limited 90.12 84.95
Country Wood Furniture Industries Co., Ltd Country Wood Furniture Industries Co., Ltd 90.12 84.95
Phuc Khanh Construction Investment and Trading Joint Stock Company Dai Hong Phat International Trading Company Limited 90.12 84.95
Shuang Yuan Plywood Manufacturing Company Limited Dai Hong Phat International Trading Company Limited 90.12 84.95
Viet Phat Export Company Limited Dai Hong Phat International Trading Company Limited 90.12 84.95
Viet Nam Vinh Phu Wood Company Limited Dai Hong Phat International Trading Company Limited 90.12 84.95
Eagle Industries Company Limited Eagle Industries Company Limited 90.12 84.95
Fulin Wood Import Export Company Limited Fulin Wood Import Export Company Limited 90.12 84.95
Greatwood Hung Yen Joint Stock Company Greatwood Hung Yen Joint Stock Company 90.12 84.95
Greatwood Joint Stock Company Greatwood Joint Stock Company 90.12 84.95
Guanyue Wood Co., Ltd Guanyue Wood Co., Ltd 90.12 84.95
Quang Minh Industrial Development Company Limited Hanbao Industry & Trade Co., Ltd 90.12 84.95
Viet North Import Export Trading Company Limited HLC Vietnam Joint Stock Company 90.12 84.95
HMTD Plywood Company Limited HMTD Plywood Company Limited 90.12 84.95
Hoang Gia Yen Bai Company Limited Hoang Gia Yen Bai Company Limited 90.12 84.95
Huiling Wood Products (Vietnam) Co., Ltd Huiling Wood Products (Vietnam) Co., Ltd 90.12 84.95
Due Tri Wood Co., Ltd Hukon International (Vietnam) Co., Ltd 90.12 84.95
Eastmark Plywood Company Limited Hukon International (Vietnam) Co., Ltd 90.12 84.95
Greenwood Company Limited Hukon International (Vietnam) Co., Ltd 90.12 84.95
Guan Wei Wood (Vietnam) Company Limited Hukon International (Vietnam) Co., Ltd 90.12 84.95
Kangda Board (Vietnam) Co., Ltd Kangda Board (Vietnam) Co., Ltd 90.12 84.95
Kim Gia Trading and Manufacturing Joint Stock Company KG Vina Plywood Trading and Import Export Company Limited 90.12 84.95
( printed page 73743)
Minh Long DV TM Joint Stock Company KG Vina Plywood Trading and Import Export Company Limited 90.12 84.95
Truong Minh Dat One Member Trading Company Limited KG Vina Plywood Trading and Import Export Company Limited 90.12 84.95
Lam Viet Joint Stock Company Lam Viet Joint Stock Company 90.12 84.95
Long Viet Plywood Technology Joint Stock Company Long Viet Plywood Technology Joint Stock Company 90.12 84.95
MGM Plywood Company Limited MGM Plywood Company Limited 90.12 84.95
Dinh Ngoc Phat Joint Stock Company Millennium Furniture Co., Ltd 90.12 84.95
Huy Khanh Co., Ltd Millennium Furniture Co., Ltd 90.12 84.95
My Hanh Wood Processing Company Limited Millennium Furniture Co., Ltd 90.12 84.95
Thang Long Urban Development and Construction Investment JSC Millennium Furniture Co., Ltd 90.12 84.95
Woodsland Joint Stock Company Millennium Furniture Co., Ltd 90.12 84.95
Zhong Sheng Wood Company Limited Millennium Furniture Co., Ltd 90.12 84.95
Minh Long DV TM Joint Stock Company Minh Long DV TM Joint Stock Company 90.12 84.95
Nam Huy Trading Limited Company Nam Huy Trading Limited Company 90.12 84.95
Nam Tien Production and Export Co., Ltd Nam Tien Production and Export Co., Ltd 90.12 84.95
Nhung Xuong Company Limited Nhung Xuong Company Limited 90.12 84.95
NN Co., Ltd NN Co., Ltd 90.12 84.95
Hong Ngoc Production and Trading Company Limited Oilriver International Limited 90.12 84.95
Vietnam Honglin Building Materials Company Limited Oilriver International Limited 90.12 84.95
Phu Thai Dong Nai Company Limited Phu Thai Dong Nai Company Limited 90.12 84.95
Phuc Khanh Construction Investment and Trading Joint Stock Company Phuc Khanh Construction Investment and Trading Joint Stock Company 90.12 84.95
New Create Plywood Company Limited Sagacity Sailing Industry Co., Ltd 90.12 84.95
Tekcom Corporation Tekcom Corporation 90.12 84.95
Thai Hoang Trading and Construction JSC Thai Hoang Trading and Construction JSC 90.12 84.95
Thanh An Wood Production Joint Stock Company Thanh An Wood Production Joint Stock Company 90.12 84.95
Thanh Truc Manufacture and Trading Company Limited Thanh Truc Manufacture and Trading Company Limited 90.12 84.95
Tien Dat Furniture Corporation Tien Dat Furniture Corporation 90.12 84.95
Tinh Bao Wood Company Limited Tinh Bao Wood Company Limited 90.12 84.95
Viet Bac Plywood Limited Liability Company Viet Bac Plywood Limited Liability Company 90.12 84.95
Viet Genius Production Trading Company Limited Viet Genius Production Trading Company Limited 90.12 84.95
Viet Nam My Gia Wood Company Limited Viet Nam My Gia Wood Company Limited 90.12 84.95
Viet Nam Woodbest Company Limited Viet Nam Woodbest Company Limited 90.12 84.95
Viet Wood Production and Trading Company Limited Viet Wood Production and Trading Company Limited 90.12 84.95
Dinh Ngoc Phat Joint Stock Company Wanek Furniture Co., Ltd 90.12 84.95
Huy Khanh Co., Ltd Wanek Furniture Co., Ltd 90.12 84.95
My Hanh Wood Processing Company Limited Wanek Furniture Co., Ltd 90.12 84.95
Thang Long Urban Development and Construction Investment JSC Wanek Furniture Co., Ltd 90.12 84.95
Woodsland Joint Stock Company Wanek Furniture Co., Ltd 90.12 84.95
Zhong Sheng Wood Company Limited Wanek Furniture Co., Ltd 90.12 84.95
Western Hanoi H2H Forest Products Joint Stock Company Western Hanoi H2H Forest Products Joint Stock Company 90.12 84.95
Woodsland Joint Stock Company Woodsland Joint Stock Company 90.12 84.95
Yen Bai Plywood Company Limited Yen Bai Plywood Company Limited 90.12 84.95
Vietnam-Wide Entity 90.12 84.95

Provisional Measures

Section 733(d) of the Act states that instructions issued pursuant to an affirmative preliminary determination may not remain in effect for more than four months, except where exporters representing a significant proportion of exports of the subject merchandise request that Commerce extend the four-month period to no more than six months. At the request of exporters that account for a significant proportion of exports of hardwood and decorative plywood from China, Indonesia, and Vietnam, Commerce extended the four-month period to six months in these investigations. Commerce published the Preliminary Determinations on March 2, 2026.[17]

The extended provisional measures period, beginning on the date of publication of the Preliminary Determinations, ended on August 29, 2026. Therefore, in accordance with section 733(d) of the Act, Commerce will instruct CBP to terminate the suspension of liquidation and to liquidate, without regard to antidumping duties, certain unliquidated entries of hardwood and decorative plywood from Indonesia and Vietnam entered, or withdrawn from warehouse, for consumption after ( printed page 73744) August 28, 2026, the final day on which the provisional measures were in effect, through the day preceding the date of publication of the ITC's final determination in the Federal Register . Suspension of liquidation and the collection of cash deposits will resume on the date of publication of the ITC final injury determinations in the Federal Register .

Establishment of the Annual Inquiry Service List

On September 20, 2021, Commerce published the final rule titled “ Regulations to Improve Administration and Enforcement of Antidumping and Countervailing Duty Laws” in the Federal Register .[18] On September 27, 2021, Commerce also published the notice titled “ Scope Ruling Application; Annual Inquiry Service List; and Informational Sessions” in the Federal Register .[19] The Final Rule and Procedural Guidance provide that Commerce will maintain an annual inquiry service list for each order or suspended investigation, and any interested party submitting a scope ruling application or request for circumvention inquiry shall serve a copy of the application or request on the persons on the annual inquiry service list for that order, as well as any companion order covering the same merchandise from the same country of origin.[20]

In accordance with the Procedural Guidance, for orders published in the Federal Register after November 4, 2021, Commerce will create an annual inquiry service list segment in Commerce's online e-filing and document management system, Antidumping and Countervailing Duty Electronic Service System (ACCESS), available at access.trade.gov , within five business days of publication of the order. Each annual inquiry service list will be saved in ACCESS, under each case number, and under a specific segment type called “AISL-Annual Inquiry Service List.” [21]

Interested parties who wish to be added to the annual inquiry service list for an order must submit an entry of appearance to the annual inquiry service list segment for the order in ACCESS within 30 days after the date of publication of the order. For ease of administration, Commerce requests that law firms with more than one attorney representing interested parties in an order designate a lead attorney to be included on the annual inquiry service list. Commerce will finalize the annual inquiry service list within five business days thereafter. As mentioned in the Procedural Guidance, the new annual inquiry service list will be in place until the following year, when the Opportunity Notice for the anniversary month of the order is published.

Commerce may update an annual inquiry service list at any time as needed based on interested parties' amendments to their entries of appearance to remove or otherwise modify their list of members and representatives, or to update contact information. Any changes or announcements pertaining to these procedures will be posted to the ACCESS website at access.trade.gov.

Special Instructions for Petitioners and Foreign Governments

In the Final Rule, Commerce stated that, “after an initial request and placement on the annual inquiry service list, both the petitioners and foreign governments will automatically be placed on the annual inquiry service list in the years that follow.” [22] Accordingly, as stated above, the petitioner and the Governments of China, Indonesia, and Vietnam should submit their initial entry of appearance after publication of this notice in order to appear in the first annual inquiry service list for those orders for which they qualify as an interested party. Pursuant to 19 CFR 351.225(n)(3), the petitioner and the Governments of China, Indonesia, and Vietnam will not need to resubmit their entries of appearance each year to continue to be included on the annual inquiry service list. However, the petitioner and the Governments of China, Indonesia, and Vietnam are responsible for making amendments to their entries of appearance during the annual update to the annual inquiry service list in accordance with the procedures described above.

Notifications to Interested Parties

This notice constitutes the AD orders with respect to hardwood and decorative plywood from China, Indonesia, and Vietnam pursuant to section 736(a) of the Act. Interested parties can find a list of AD and countervailing duty orders currently in effect at www.trade.gov/​data-visualization/​adcvd-proceedings.

These AD orders are published in accordance with section 736(a) of the Act and 19 CFR 351.211(b).

Dated: November 12, 2026.

Steven Presing,

Executive Director for AD/CVD Policy and Negotiations.

Appendix

Scope of the Orders

The merchandise covered by these orders is hardwood and decorative plywood, and certain veneered panels as described below. For purposes of these orders, hardwood and decorative plywood is defined as a generally flat, multilayered plywood or other veneered panel, consisting of two or more layers or plies of wood veneers in combination with a core or without a core. The veneers and, if present, the core are glued or otherwise bonded together. A hardwood and decorative plywood panel must have at least either the face or back veneer composed of one or more species of hardwood, softwood, or bamboo, regardless of any surface coverings. Hardwood and decorative plywood may include products that meet the American National Standard for Hardwood and Decorative Plywood, ANSI/HPVA HP-1-2024 (including any revisions to that standard).

For purposes of the orders a “veneer” is a slice of wood regardless of thickness which is cut, sliced or sawed from a log, bolt, or flitch. The face and back veneers are the outermost veneer of wood irrespective of additional surface coatings or covers as described below. The core of hardwood and decorative plywood (for those products that include a core) consists of the layer or layers of one or more material(s) that are situated between the face and back veneers. The core may be composed of a range of materials, including but not limited to hardwood, softwood, particleboard, or medium density fiberboard (MDF).

All hardwood and decorative plywood is included within the scope of the orders regardless of whether or not the face and/or back veneers are surface coated or covered and whether or not such surface coating(s) or covers obscures the grain, textures, or markings of the wood. Examples of surface coatings and covers include, but are not limited to: ultra violet light cured polyurethanes; oil or oil-modified or water-based polyurethanes; wax; epoxy-ester finishes; moisture-cured urethanes; paints; stains; paper; aluminum; high pressure laminate; MDF; medium density overlay ( printed page 73745) (MDO); and phenolic film. Additionally, the face veneer of hardwood and decorative plywood may be sanded; smoothed or given a “distressed” appearance through such methods as hand-scraping or wire brushing.

All hardwood and decorative plywood is included within the scope even if it is trimmed; cut-to-size; notched; punched; drilled; or has undergone other forms of minor processing. All hardwood and decorative plywood is included within the scope of the orders, without regard to dimension (overall thickness, thickness of face veneer, thickness of back veneer, thickness of core, thickness of inner veneers, width, or length). However, the most common panel sizes of hardwood and decorative plywood are 1219 x 1829 mm (48 x 72 inches), 1219 x 2438 mm (48 x 96 inches), and 1219 x 3048 mm (48 x 120 inches). Subject merchandise also includes hardwood and decorative plywood that has been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, or any other processing that would not otherwise remove the merchandise from the scope of the orders if performed in the country of manufacture of the in-scope product.

The scope of the orders excludes the following items: (1) structural plywood (also known as “industrial plywood” or “industrial panels”) that is certified, manufactured, and stamped to meet U.S. Products Standard PS-1-22 or PS 2-18 for Structural Plywood (including any revisions to those standards, or to a foreign structural plywood standard that Commerce has determined, in a scope ruling or other proceeding, to be substantially equivalent to PS-1-22 or PS 2-18); (2) products which have a face and back veneer of cork; (3) hardwood plywood subject to the antidumping and countervailing duty orders on hardwood plywood from China. See Certain Hardwood Plywood Products from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order,83 FR 504 (January 4, 2018); and Certain Hardwood Plywood Products from the People's Republic of China: Countervailing Duty Order,83 FR 513 (January 4, 2018); (4) multilayered wood flooring, as described in the antidumping duty and countervailing duty orders on multilayered wood flooring from China. See Multilayered Wood Flooring from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order,76 FR 76690 (December 8, 2011); and Multilayered Wood Flooring from the People's Republic of China: Countervailing Duty Order,76 FR 76693 (December 8, 2011), as amended by Multilayered Wood Flooring from the People's Republic of China: Amended Antidumping and Countervailing Orders,77 FR 5484 (February 3, 2012); (5) multilayered wood flooring with a face veneer of bamboo or composed entirely of bamboo; (6) plywood which has a shape or design other than a flat panel, with the exception of any minor processing described above; (7) products made entirely from bamboo and adhesives (also known as “solid bamboo”); and (8) Phenolic Film Faced Plyform (PFF), also known as Phenolic Surface Film Plywood (PSF), defined as a panel with an “Exterior” or “Exposure 1” bond classification as is defined by The Engineered Wood Association, having an opaque phenolic film layer with a weight equal to or greater than 90g/m3 permanently bonded on both the face and back veneers and an opaque, moisture resistant coating applied to the edges. Structural plywood qualifying for part (1) of the above exclusion must bear the certifying agency's stamp or mark, applied in accordance with the requirements of the applicable standard, identifying the certification agency, applicable standard or grade designation, and the mill number or other facility-identifying code assigned by the certifying agency to the producing facility.

Also excluded from the scope of the orders are softwood structural plywood “downfall” panels, defined as plywood panels manufactured at a facility certified to produce structural plywood to PS 1-22 or PS 2-18 standards (or a Commerce-determined equivalent foreign standard), where the specific panels at issue were produced as part of a production run intended to meet such standards but did not receive the certifying agency's stamp or mark because they failed to meet the applicable bond performance, veneer grade, or other qualifying criteria of that standard.

Also excluded from the scope of the orders are wooden furniture goods that, at the time of importation, are fully assembled and are ready for their intended uses. Also excluded from the scope of the orders is “ready to assemble” (RTA) furniture. RTA furniture is defined as (A) furniture packaged for sale for ultimate purchase by an end-user that, at the time of importation, includes (1) all wooden components (in finished form) required to assemble a finished unit of furniture, (2) all accessory parts ( e.g., screws, washers, dowels, nails, handles, knobs, adhesive glues) required to assemble a finished unit of furniture, and (3) instructions providing guidance on the assembly of a finished unit of furniture; (B) unassembled bathroom vanity cabinets, having a space for one or more sinks, that are imported with all unassembled hardwood and hardwood plywood components that have been cut-to-final dimensional component shape/size, painted or stained prior to importation, and stacked within a singled shipping package, except for furniture feet which may be packed and shipped separately; or (C) unassembled bathroom vanity linen closets that are imported with all unassembled hardwood and hardwood plywood components that have been cut-to-final dimensional shape/size, painted or stained prior to importation, and stacked within a single shipping package, except for furniture feet which may be packed and shipped separately.

Also excluded from the scope of the orders are kitchen cabinets that, at the time of importation, are fully assembled and are ready for their intended uses. Also excluded from the scope of the orders are RTA kitchen cabinets. RTA kitchen cabinets are defined as kitchen cabinets packaged for sale for ultimate purchase by an end-user that, at the time of importation, includes: (1) all wooden components (in finished form) required to assemble a finished unit of cabinetry; (2) all accessory parts ( e.g., screws, washers, dowels, nails, handles, knobs, hooks, adhesive glues) required to assemble a finished unit of cabinetry; and (3) instructions providing guidance on the assembly of a finished unit of cabinetry. Excluded from the scope of these orders are finished table tops, which are table tops imported in finished form with pre-cut or drilled openings to attach the underframe or legs. The table tops are ready for use at the time of import and require no further finishing or processing. Excluded from the scope of these orders are finished countertops that are imported in finished form and require no further finishing or manufacturing.

Also excluded from the scope of the orders are laminated veneer lumber (LVL) door and window components with (1) a maximum width of 44 millimeters, a thickness from 30 millimeters to 72 millimeters, and a length of less than 2413 millimeters, (2) water boiling point exterior adhesive, (3) a modulus of elasticity of 1,500,000 pounds per square inch or higher, (4) finger-jointed or lap-jointed core veneer with all layers oriented so that the grain is running parallel or with no more than 3 dispersed layers of veneer oriented with the grain running perpendicular to the other layers; and (5) top layer machined with a curved edge and one or more profile channels throughout.

Also excluded from the scope of these orders are certain door stiles and rails made of LVL that have a width not to exceed 50 millimeters, a thickness not to exceed 50 millimeters, and a length of less than 2,450 millimeters.

Also excluded from the scope of these orders are finished two-ply products that are made of one ply of wood veneer and one ply of a non-wood veneer material and the two-ply product cannot be glued or otherwise adhered to additional plies or that are made of two plies of wood veneer and have undergone staining, cutting, notching, punching, drilling, or other processing on the surface of the veneer such that the two-ply product cannot be glued or otherwise adhered to additional plies.

Imports of hardwood and decorative plywood are primarily entered under the following HTSUS numbers: 4412.10.0500; 4412.31.0520; 4412.31.0540; 4412.31.0560; 4412.31.0620; 4412.31.0640; 4412.31.0660; 4412.31.2510; 4412.31.2520; 4412.31.2610; 4412.31.2620; 4412.31.4040; 4412.31.4050; 4412.31.4060; 4412.31.4070; 4412.31.4080; 4412.31.4140; 4412.31.4150; 4412.31.4155; 4412.31.4160; 4412.31.4165; 4412.31.4180; 4412.31.4200; 4412.31.4500; 4412.31.4850; 4412.31.4860; 4412.31.4863; 4412.31.4865; 4412.31.4866; 4412.31.4869; 4412.31.4875; 4412.31.4880; 4412.31.5130; 4412.31.5135; 4412.31.5150; 4412.31.5155; 4412.31.5160; 4412.31.5165; 4412.31.5170; 4412.31.5175; 4412.31.5235; 4412.31.5255; 4412.31.5260; 4412.31.5262; 4412.31.5264; 4412.31.5265; 4412.31.5266; 4412.31.5268; 4412.31.5270; 4412.31.5275; 4412.31.6000; 4412.31.6100; 4412.31.9100; 4412.31.9200; 4412.32.0520; 4412.32.0540; 4412.32.0560; 4412.32.0570; ( printed page 73746) 4412.32.0620; 4412.32.0640; 4412.32.0670; 4412.32.2510; 4412.32.2520; 4412.32.2530; 4412.32.2610; 4412.32.2630; 4412.32.3130; 4412.32.3135; 4412.32.3140; 4412.32.3150; 4412.32.3155; 4412.32.3160; 4412.32.3165; 4412.32.3170; 4412.32.3175; 4412.32.3185; 4412.32.3235; 4412.32.3255; 4412.32.3265; 4412.32.3275; 4412.32.3285; 4412.32.5600; 4412.32.5700; 4412.33.0620; 4412.33.0640; 4412.33.0670; 4412.33.2630; 4412.33.3235; 4412.33.3255; 4412.33.3265; 4412.33.3275; 4412.33.3285; 4412.33.5700; 4412.34.2600; 4412.34.3235; 4412.34.3255; 4412.34.3265; 4412.34.3275; 4412.34.3285; 4412.34.5700; 4412.39.4051; 4412.39.4052; 4412.39.4059; 4412.39.4061; 4412.39.4062; 4412.39.4069; 4412.39.5050; 4412.41.0000; 4412.42.0000; 4412.51.1030; 4412.51.1050; 4412.51.3111; 4412.51.3121; 4412.51.3141; 4412.51.3161; 4412.51.3175; 4412.51.4100; 4412.52.1030; 4412.52.1050; 4412.52.3121; 4412.52.3161; 4412.52.3175; 4412.52.4100; 4412.91.0600; 4412.91.1020; 4412.91.1030; 4412.91.1040; 4412.91.3110; 4412.91.3120; 4412.91.3130; 4412.91.3140; 4412.91.3150; 4412.91.3160; 4412.91.3170; 4412.91.4100; 4412.92.0700; 4412.92.1120; 4412.92.1130; 4412.92.1140; 4412.92.3120; 4412.92.3150; 4412.92.3160; 4412.92.3170; 4412.92.4200; 4412.94.1020; 4412.94.1030; 4412.94.1040; 4412.94.1050; 4412.94.3110; 4412.94.3111; 4412.94.3120; 4412.94.3121; 4412.94.3130; 4412.94.3131; 4412.94.3140; 4412.94.3141; 4412.94.3150; 4412.94.3160; 4412.94.3161; 4412.94.3170; 4412.94.3171; 4412.94.3175; 4412.94.4100; 4412.99.0600; 4412.99.1020; 4412.99.1030; 4412.99.1040; 4412.99.3110; 4412.99.3120; 4412.99.3130; 4412.99.3140; 4412.99.3150; 4412.99.3160; 4412.99.3170; 4412.99.4100; 4412.99.5100; 4412.99.5115; 4412.99.5701; and 4412.99.5710.

Imports of hardwood and decorative plywood may also enter under HTSUS subheadings 4412.10.9000; 4412.94.5100; 4412.94.9500; 4412.99.6000; 4412.99.7000; 4412.99.8000; 4412.99.9000; 4412.99.9500; 9403.90.7005; 9403.90.7010; and 9403.90.7080.

The HTSUS subheadings are provided for the convenience of the U.S. government and customs purposes, and do not define the scope of the orders. The written description of the merchandise is dispositive.

Footnotes

1.   See Hardwood and Decorative Plywood from the People's Republic of China: Final Determination of Sales at Less Than Fair Value and Final Affirmative Determination of Critical Circumstances,91 FR 45778 (July 21, 2026), and accompanying Issues and Decision Memorandum (IDM); see also Hardwood and Decorative Plywood From Indonesia: Final Affirmative Determination of Sales at Less Than Fair Value,91 FR 45774 (July 21, 2026), and accompanying IDM; and Hardwood and Decorative Plywood from the Socialist Republic of Vietnam: Final Affirmative Determination of Sales at Less Than Fair Value and Final Negative Determination of Critical Circumstances,91 FR 45782 (July 21, 2026), and accompanying IDM.

Back to Citation

3.   See ITC's Letter, Investigation Nos. 701-TA-764-766 and 731-TA-1747-1749 (Final), dated September 4, 2026 (ITC Letter); see also Hardwood and Decorative Plywood From China, Indonesia, and Vietnam; Determinations,91 FR 57383 (September 9, 2026) (ITC Final FR); and Hardwood and Decorative Plywood from China, Indonesia, and Vietnam, Inv. Nos. 701-TA-764-766 and 731-TA-1747-1749 (Final), USITC Pub. 5784 (September 2026) (ITC Final Publication).

Back to Citation

4.   See ITC Final Publication at 1.

Back to Citation

5.   See Memorandum, “Comments on the Scope of the Orders,” dated September 17, 2026.

Back to Citation

6.   See Petitioner's Letter, “Comments on Proposed Scope Revisions,” dated September 23, 2026; see also M&G Respondent's Letter, “Comments on the Scope of the Orders,” dated September 23, 2026. The M&G Respondents are Affiliated Resources, LLC; Argo Fine Imports LLC; Buckeye Pacific, LLC; Cabinetworks Group; Canusa Wood Products Limited; Far East American, Inc.; MBCI dba Masterbrand Cabinets LLC; Marine Lumber Company; McCorry & Company Limited; Northwest Hardwoods, Inc.; Principal Trading LLC; Richmond International Forest Products, LLC; TaracaPacific Inc.; Viking Forest Products LLC; and PT Wijaya Cahaya Timber Tbk (collectively, First Party Scope Comments).

Back to Citation

7.   See Memoranda, “Second Request for Comments on the Scope of the Orders,” dated October 8, 2026, and “Request for Comments on Certification,” dated October 9, 2026.

Back to Citation

8.   See Petitioner's Letter, “Comments on Second Proposed Scope Revisions and Comments on Certification,” dated October 14, 2026; see also M&G Respondents' Letter, “Comments on the Scope of the Orders and Proposed Certification Language,” dated October 14, 2026 (collectively, Second Party Scope Comments).

Back to Citation

9.   See First Party Scope Comments; see also Second Party Scope Comments.

Back to Citation

10.   See Memorandum, “Scope of the Orders Decision Memorandum,” dated concurrently with this notice.

Back to Citation

11.   See ITC Letter.

Back to Citation

12.   Id.

Back to Citation

13.   See Hardwood and Decorative Plywood from the Socialist Republic of Vietnam: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Preliminary Negative Determination of Critical Circumstances, and Postponement of Final Determination and Extension of Provisional Measures,91 FR 10059 (March 2, 2026); see also Hardwood and Decorative Plywood from the People's Republic of China: Preliminary Affirmative Determination of Sales at Less Than Fair Value and Preliminary Affirmative Determination of Critical Circumstances,91 FR 10073 (March 2, 2026); Hardwood and Decorative Plywood from Indonesia: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures,91 FR 10067 (March 2, 2026) (collectively, Preliminary Determinations).

Back to Citation

14.   See ITC Final Publication at 18 n.47.

Back to Citation

15.   Id. at 22.

Back to Citation

16.  The China-Wide Entity includes Linyi Evergreen and Xuzhou Shelter.

Back to Citation

17.   See Preliminary Determinations.

Back to Citation

18.   See Regulations to Improve Administration and Enforcement of Antidumping and Countervailing Duty Laws,86 FR 52300 (September 20, 2021) ( Final Rule).

Back to Citation

19.   See Scope Ruling Application; Annual Inquiry Service List; and Informational Sessions,86 FR 53205 (September 27, 2021) ( Procedural Guidance).

Back to Citation

20.   Id.

Back to Citation

21.  This segment will be combined with the ACCESS Segment Specific Information (SSI) field, which will display the month in which the notice of the order or suspended investigation was published in the Federal Register , also known as the anniversary month. For example, for an order under case number A-000-000 that was published in the Federal Register in January, the relevant segment and SSI combination will appear in ACCESS as “AISL-January Anniversary.” Note that there will be only one annual inquiry service list segment per case number, and the anniversary month will be pre-populated in ACCESS.

Back to Citation

22.   See Final Rule, 86 FR at 52335.

Back to Citation

[FR Doc. 2026-23386 Filed 11-16-26; 8:45 am]

BILLING CODE 3510-DS-P

Legal Citation

Federal Register Citation

Use this for formal legal and research references to the published document.

91 FR 73739

Web Citation

Suggested Web Citation

Use this when citing the archival web version of the document.

“Hardwood and Decorative Plywood From the People's Republic of China, Indonesia, and the Socialist Republic of Vietnam: Antidumping Duty Orders,” thefederalregister.org (November 17, 2026), https://thefederalregister.org/documents/2026-23386/hardwood-and-decorative-plywood-from-the-people-s-republic-of-china-indonesia-and-the-socialist-republic-of-vietnam-anti.