Certain Freight Rail Couplers and Parts Thereof From India: Countervailing Duty Order
Based on affirmative final determinations by the U.S. Department of Commerce (Commerce) and U.S. International Trade Commission (ITC), Commerce is issuing a countervailing duty ...
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
Based on affirmative final determinations by the U.S. Department of Commerce (Commerce) and U.S. International Trade Commission (ITC), Commerce is issuing a countervailing duty (CVD) order on certain freight rail
( printed page 75289)
couplers and parts thereof (freight rail couplers) from India.
DATES:
Applicable November 20, 2026.
FOR FURTHER INFORMATION CONTACT:
Benjamin Blythe or Joshua Jacobson, Office IV, telephone: (202) 482-3457 or (202) 482-0266, respectively; AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230.
SUPPLEMENTARY INFORMATION:
Background
In accordance with sections 705(d) and 777(i) of the Tariff Act of 1930, as amended, (the Act) on September 24, 2026, Commerce published in the
Federal Register
its affirmative final determination in the CVD investigation of freight rail couplers from India.[1]
On November 9, 2026, the ITC notified Commerce of its final determination, pursuant to section 705(d) of the Act, that an industry in the United States is materially injured within the meaning of section 705(b)(1)(A)(i) of the Act by reason of imports of freight rail couplers from India.[2]
Scope of the Order
The products covered by this order are freight rail couplers from India. For a full description of the scope of this order,
see
the appendix to this notice.
Countervailing Duty Order
Based on the affirmative final determination by the ITC that an industry in the United States is materially injured by reason of subsidized imports of freight rail couplers from India,[3]
in accordance with sections 705(c)(2) and 706(a) of the Act, Commerce is issuing this CVD order. Because the ITC determined that imports of freight rail couplers from India are materially injuring a U.S. industry, unliquidated entries of such merchandise entered, or withdrawn from warehouse, for consumption, are subject to the assessment of countervailing duties.
Therefore, in accordance with section 706(a)(1) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to assess, upon further instructions by Commerce, countervailing duties on certain unliquidated entries of freight rail couplers from India, that were entered, or withdrawn from warehouse, for consumption on or after March 3, 2026, the date of publication of the
Preliminary Determination,[4]
but will not include entries occurring after the expiration of the provisional measures period and before the publication of the ITC's final injury determination under section 705(b) of the Act, as further described below.
Suspension of Liquidation and Cash Deposits
In accordance with section 706 of the Act, Commerce intends to instruct CBP to reinstitute the suspension of liquidation of freight rail couplers from India, effective on the date of publication of the ITC's final affirmative injury determination in the
Federal Register
on November 13, 2026,[5]
and to assess, upon further instruction by Commerce, pursuant to section 706(a)(1) of the Act, countervailing duties on each entry of subject merchandise in an amount based on the net countervailable subsidy rates below. These instructions suspending liquidation will remain in effect until further notice.
Commerce also intends, pursuant to section 706(a)(1) of the Act, to instruct CBP to require cash deposits equal to the amounts as indicated below. Accordingly, effective on the date of publication of the ITC's final affirmative injury determination in the
Federal Register
on November 13, 2026, CBP will require, at the same time as importers would normally deposit estimated customs duties on the subject merchandise, a cash deposit for each entry of subject merchandise equal to the subsidy rates listed below.[6]
The all-others rates apply to all producers or exporters not specifically listed below, as appropriate.
Estimated Countervailable Subsidy Rates
The estimated countervailable subsidy rates are as follows:
Company
Subsidy rate (percent
ad valorem)
Kharagpur Metal Reforming Industries Pvt Ltd
9.71
Texmaco Rail and Engineering Limited
* 75.00
Bhilai Engineering Corporation Ltd
* 75.00
Jupiter Wagons Ltd
* 75.00
All Others
9.71
* Rate based on facts available with adverse inferences.
Provisional Measures
Section 703(d) of the Act states that the suspension of liquidation pursuant to an affirmative preliminary determination may not remain in effect for more than four months. In the underlying investigation, Commerce published the
Preliminary Determination
on March 3, 2026.[7]
As such, the four-month period beginning on the date of the publication of the
Preliminary Determination
ended on June 30, 2026. Therefore, entries of freight rail couplers from India made on or after July 1, 2026, and prior to the date of publication of the ITC's final determination in the
Federal Register
on November 13, 2026, are not subject to the assessment of countervailing duties due to Commerce's discontinuation of the suspension of liquidation.
In accordance with section 703(d) of the Act, Commerce instructed CBP to terminate the suspension of liquidation and to liquidate, without regard to countervailing duties, certain unliquidated entries of freight rail couplers from India entered, or withdrawn from warehouse, for consumption on or after July 1, 2026, the date on which the provisional CVD measures expired, until and through the day preceding the date of publication of the ITC's final injury determination in the
Federal Register
on November 13, 2026. Suspension of liquidation and the collection of cash deposits will resume on the date of publication of the ITC final injury determinations in the
Federal Register
on November 13, 2026.
Establishment of the Annual Inquiry Service List
On September 20, 2021, Commerce published the
Final Rule
in the
Federal Register
.[8]
On September 27, 2021, Commerce also published the
Procedural Guidance
in the
Federal Register
.[9]
The
Final Rule
and
( printed page 75290)
Procedural Guidance
provide that Commerce will maintain an annual inquiry service list for each order or suspended investigation, and any interested party submitting a scope ruling application or request for circumvention inquiry shall serve a copy of the application or request on the persons on the annual inquiry service list for that order, as well as any companion order covering the same merchandise from the same country of origin.[10]
In accordance with the
Procedural Guidance,
for orders published in the
Federal Register
after November 4, 2021, Commerce will create an annual inquiry service list segment in Commerce's online e-filing and document management system, Antidumping and Countervailing Duty Electronic Service System (ACCESS), available at
access.trade.gov,
within five business days of publication of the order. Each annual inquiry service list will be saved in ACCESS, under each case number, and under a specific segment type called “AISL-Annual Inquiry Service List.” [11]
Interested parties who wish to be added to the annual inquiry service list for an order must submit an entry of appearance to the annual inquiry service list segment for the order in ACCESS within 30 days after the date of publication of the order. For ease of administration, Commerce requests that law firms with more than one attorney representing interested parties in an order designate a lead attorney to be included on the annual inquiry service list. Commerce will finalize the annual inquiry service list within five business days thereafter. As mentioned in the
Procedural Guidance,
the new annual inquiry service list will be in place until the following year, when the
Opportunity Notice
for the anniversary month of the order is published.
Commerce may update an annual inquiry service list at any time as needed based on interested parties' amendments to their entries of appearance to remove or otherwise modify their list of members and representatives, or to update contact information. Any changes or announcements pertaining to these procedures will be posted to the ACCESS website.
Special Instructions for Petitioners and Foreign Governments
In the
Final Rule,
Commerce stated that, “after an initial request and placement on the annual inquiry service list, both petitioners and foreign governments will automatically be placed on the annual inquiry service list in the years that follow.” [12]
Accordingly, as stated above, the petitioners and foreign governments should submit their initial entry of appearance after publication of this notice in order to appear in the first annual inquiry service list. Pursuant to 19 CFR 351.225(n)(3), the petitioners and foreign governments will not need to resubmit their entries of appearance each year to continue to be included on the annual inquiry service list. However, the petitioners and foreign governments are responsible for making amendments to their entries of appearance during the annual update to the annual inquiry service list in accordance with the procedures described above.
Notification to Interested Parties
This notice constitutes the CVD orders with respect to freight rail couplers from India pursuant to section 706(a) of the Act. Interested parties can find a list of CVD orders currently in effect at
www.trade.gov/data-visualization/adcvd-proceedings.
This CVD order is published in accordance with section 706(a) of the Act and 19 CFR 351.211(b).
Dated: November 16, 2026.
Kasey O'Connor,
Deputy General Counsel, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.
Appendix
Scope of the Order
The scope of this order covers certain freight railcar couplers (also known as “fits” or “assemblies”) and parts thereof. Freight rail couplers are composed of two main parts, namely knuckles and coupler bodies but may also include other items (
e.g.,
coupler locks, lock lift assemblies, knuckle pins, knuckle throwers, and rotors). The parts covered by this order include: (1) E coupler bodies; (2) E/F coupler bodies; (3) F coupler bodies; (4) E knuckles; and (5) F knuckles; as set forth by the Association of American Railroads (AAR). The freight rail coupler parts are included within the scope of this order when imported individually. Coupler locks, lock lift assemblies, knuckle pins, knuckle throwers, and rotors are covered merchandise when imported in an assembly but are not covered by the scope when imported separately.
Subject freight rail couplers and parts are included within the scope whether finished or unfinished, whether imported individually or with other subject or nonsubject parts, whether assembled or unassembled, whether mounted or unmounted, or if joined with nonsubject merchandise, such as other nonsubject parts or a completed railcar. Finishing includes, but is not limited to, arc washing, welding, grinding, shot blasting, heat treatment, machining, and assembly of various parts. When a subject coupler or subject parts are mounted on or to other nonsubject merchandise, such as a railcar, only the coupler or subject parts are covered by the scope.
The finished products covered by the scope of this order meet or exceed the AAR specifications of M-211, “Foundry and Product Approval Requirements for the Manufacture of Couplers, Coupler Yokes, Knuckles, Follower Blocks, and Coupler Parts,” and/or AAR M-215 “Coupling Systems,” or other equivalent domestic or international standards (including any revisions to the standard(s)).
The country of origin for subject couplers and parts thereof, whether fully assembled, unfinished or finished, or attached to a railcar, is the country where the subject coupler parts were cast or forged. Subject merchandise includes coupler parts as defined above that have been further processed or further assembled, including those coupler parts attached to a railcar in third countries. Further processing includes, but is not limited to, arc washing, welding, grinding, shot blasting, heat treatment, painting, coating, priming, machining, and assembly of various parts. The inclusion, attachment, joining, or assembly of nonsubject parts with subject parts or couplers either in the country of manufacture of the in-scope product or in a third country does not remove the subject parts or couplers from the scope.
The couplers that are the subject of this order are currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) statistical reporting number 8607.30.1010, 8607.30.1050, and 8607.30.1090. Subject merchandise attached to finished railcars may also enter under HTSUS statistical reporting numbers 7326.90.8688, 8606.10.0000, 8606.91.0000, 8606.92.0000, 8606.99.0130, or under subheading 8606.99.0160. Subject merchandise may also be imported under HTSUS statistical reporting number 7325.99.5000. These HTSUS subheadings are provided for convenience and customs purposes only; the written description of the scope of this order is dispositive.
Footnotes
1.
See Certain Freight Rail Couplers and Parts Thereof from India: Final Affirmative Countervailing Duty Determination,91 FR 60595 (September 24, 2026).
4.
See Certain Freight Rail Couplers and Parts Thereof from India: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination with Final Antidumping Duty Determination,91 FR 10370 (March 3, 2026) (
Preliminary Determination).
8.
See Regulations to Improve Administration and Enforcement of Antidumping and Countervailing Duty Laws,86 FR 52300 (September 20, 2021) (
Final Rule).
11.
This segment will be combined with the ACCESS Segment Specific Information (SSI) field which will display the month in which the notice of the order or suspended investigation was published in the
Federal Register
, also known as the anniversary month. For example, for an order under case number A-000-000 that was published in the
Federal Register
in January, the relevant segment and SSI combination will appear in ACCESS as “AISL-January Anniversary.” Note that there will be only one annual inquiry service list segment per case number, and the anniversary month will be pre-populated in ACCESS.