80 FR 28972 - Certain Steel Nails From the Sultanate of Oman: Final Determination of Sales at Less Than Fair Value
DEPARTMENT OF COMMERCE
International Trade Administration Federal Register Volume 80, Issue 97 (May 20, 2015)
International Trade Administration
Federal Register Volume 80, Issue 97 (May 20, 2015)
| Page Range | 28972-28974 | |
| FR Document | 2015-12248 |
[Federal Register Volume 80, Number 97 (Wednesday, May 20, 2015)] [Notices] [Pages 28972-28974] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2015-12248] [[Page 28972]] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE International Trade Administration [A-523-808] Certain Steel Nails From the Sultanate of Oman: Final Determination of Sales at Less Than Fair Value AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (``the Department'') determines that imports of certain steel nails (``nails'') from the Sultanate of Oman (``Oman'') are being sold in the United States at less than fair value (``LTFV''), as provided in section 735 of the Tariff Act of 1930, as amended (the ``Act''). The final weighted-average dumping margins of sales at LTFV are listed below in the section entitled ``Final Determination Margins.'' DATES: Effective Date: May 20, 2015. FOR FURTHER INFORMATION CONTACT: Lilit Astvatsatrian, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482- 6412. SUPPLEMENTARY INFORMATION: Background On December 29, 2014, the Department published in the Federal Register the preliminary determination in the LTFV investigation of nails from Oman.\1\ In the Preliminary Determination, we postponed the final determination until no later than 135 days after the publication of the Preliminary Determination in accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii) and invited parties to comment on our Preliminary Determination. --------------------------------------------------------------------------- \1\ See Certain Steel Nails From the Sultanate of Oman: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 79 FR 78034 (December 29, 2014) (``Preliminary Determination''). --------------------------------------------------------------------------- The following events have occurred since the Preliminary Determination. Between January 19, 2015 and January 29, 2015, the Department conducted sales and cost verifications of the mandatory respondent, Oman Fasteners, LLC (``Oman Fasteners''). On March 10, 2015, Mid Continent Steel & Wire, Inc. (``Petitioner''), Oman Fasteners, and Overseas International Steel Industry, LLC (``OISI''), an interested party, submitted case briefs. On March 18, 2015, Petitioner, Oman Fasteners, and OISI submitted rebuttal briefs. On April 16, 2015, the Department held a public hearing. Period of Investigation The period of investigation (``POI'') is April 1, 2013 through March 31, 2014. Scope of the Investigation The product covered by this investigation is certain steel nails from Oman. For a full description of the scope of the investigation, see Appendix I to this notice. Since the Preliminary Determination, several interested parties (i.e., IKEA Supply AG, The Home Depot, Target Corporation, and Petitioner) commented on the scope of these investigations. The Department reviewed these comments and made certain changes. For further discussion, see the Issues and Decision Memorandum.\2\ The scope in Appendix I reflects all modifications to the scope made by the Department for this final determination. --------------------------------------------------------------------------- \2\ See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, from Abdelali Elouaradia, Acting Office Director for Enforcement and Compliance (Office VI), ``Certain Steel Nails from the Sultanate of Oman: Issues and Decision Memorandum for the Final Determination of Sales at Less Than Fair Value'' (Issues and Decision Memorandum), dated concurrently with this determination and hereby adopted by this notice. --------------------------------------------------------------------------- Verification As provided in section 782(i) of the Act, in January 2015, we verified the sales and cost information submitted by Oman Fasteners for use in our final determination. We used standard verification procedures including an examination of relevant accounting and production records, and original source documents provided by Oman Fasteners. Analysis of Comments Received All issues raised in the case and rebuttal briefs by parties in this investigation are addressed in the Issues and Decision Memorandum accompanying this notice, and which is hereby adopted by this notice. A list of the issues raised and to which the Department responded is attached to this notice as Appendix II. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov. The Issues and Decision memorandum is available to all parties in the Central Records Unit, room 7046 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov. The signed and electronic versions of the Issues and Decision Memorandum are identical in content. Changes to the Margin Calculations Since the Preliminary DeterminationWe updated Oman Fasteners' reported sales quantity as a result of minor corrections and findings at the verification.\3\ --------------------------------------------------------------------------- \3\ See Memorandum to the File from Lilit Astvatsatrian, International Trade Compliance Analyst, ``Analysis Memorandum for the Final Determination of the Antidumping Duty Investigation of Certain Steel Nails from the Sultanate of Oman: Oman Fasteners, LLC,'' dated concurrently with this determination (``Final Analysis Memorandum''), at pages 1-2 and Attachment 1; see also Verification of the Sales Questionnaire Responses of Oman Fasteners, LLC: Antidumping Duty Investigation of Certain Steel Nails from the Sultanate of Oman, dated February 27, 2015 (``Verification Report''), at page 2 and Exhibit 1. --------------------------------------------------------------------------- We corrected the misspelled name of a variable in the U.S. sales database which was used in the calculation of the freight revenue cap.\4\ --------------------------------------------------------------------------- \4\ See Final Analysis Memorandum, at page 2 and Attachment 1 and IDM, at Comment 3. --------------------------------------------------------------------------- We excluded a sale with a sale date prior to the beginning of the POI.\5\ --------------------------------------------------------------------------- \5\ See Final Analysis Memorandum, at page 2 and Attachment 1 and IDM, at Comment 5. --------------------------------------------------------------------------- We updated the shipment dates and the U.S. credit expense for certain sales as a result of findings at the verification.\6\ --------------------------------------------------------------------------- \6\ See Final Analysis Memorandum, at page 2 and Attachment 1; IDM, at Comment 4, and Verification Report, at Exhibits VE-VIII.A-D and VE-VIII.F-G. --------------------------------------------------------------------------- We adjusted the reported total cost of manufacturing of each control number to reflect the revised per-unit scrap offset identified at the cost verification.\7\ --------------------------------------------------------------------------- \7\ See Memorandum to the File from Robert B. Greger, Verification of Oman Fasteners LLC in the Antidumping Duty Investigation of Certain Steel Nails from the Sultanate of Oman, dated February 18, 2015 at page 2. --------------------------------------------------------------------------- Final Determination Margins The Department determines that the following weighted-average dumping margins exist for the period April 1, 2013, through March 31, 2014: ------------------------------------------------------------------------ Weighted- average Exporter or producer dumping margin (percent) ------------------------------------------------------------------------ Oman Fasteners, LLC......................................... 9.10 All Others.................................................. 9.10 ------------------------------------------------------------------------ All Others Rate Section 735(c)(5)(A) of the Act provides that the estimated ``all others'' rate shall be an amount equal to the [[Page 28973]] weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero or de minimis margins, and any margins determined entirely under section 776 of the Act. We based our calculation of the ``all others'' rate on the margin calculated for Oman Fasteners, the only mandatory respondent in this investigation. Disclosure We will disclose to parties in this proceeding the calculations performed for this final determination within five days of the date of public announcement of our final determination, in accordance with 19 CFR 351.224(b). Continuation of Suspension of Liquidation Pursuant to section 735(c)(1)(B) of the Act, the Department will instruct U.S. Customs and Border Protection (``CBP'') to continue to suspend liquidation of all entries of certain steel nails from Oman which were entered, or withdrawn from warehouse, for consumption on or after December 29, 2014, the date of publication of the Preliminary Determination. We also will instruct CBP to require a cash deposit equal to the weighted-average amount by which normal value exceeds U.S. price, as follows: (1) The cash deposit rate for Oman Fasteners will be equal to the estimated weighted-average dumping margin determined in this final determination; (2) if the exporter is not a firm identified in this investigation but the producer is, the cash deposit rate will be equal to the estimated weighted-average dumping margin established for the producer of the subject merchandise; and (3) the cash deposit rate for all other producers or exporters will be 9.10 percent. These suspension of liquidation instructions will remain in effect until further notice. International Trade Commission Notification In accordance with section 735(d) of the Act, we will notify the U.S. International Trade Commission (``ITC'') of our final determination. As our final determination is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will determine within 45 days whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports or sales (or the likelihood of sales) for importation of the subject merchandise. If the ITC determines that such injury exists, the Department will issue an antidumping duty order directing CBP to assess, upon further instruction by the Department, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation. Return or Destruction of Proprietary Information This notice will serve as a reminder to parties subject to administrative protective order (``APO'') of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Notification to Interested Parties We are issuing and publishing this determination and notice in accordance with sections 735(d) and 777(i) of the Act. Dated: May 13, 2015. Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. Appendix I--Scope of the Investigation The merchandise covered by this investigation is certain steel nails having a nominal shaft length not exceeding 12 inches.\8\ Certain steel nails include, but are not limited to, nails made from round wire and nails that are cut from flat-rolled steel. Certain steel nails may be of one piece construction or constructed of two or more pieces. Certain steel nails may be produced from any type of steel, and may have any type of surface finish, head type, shank, point type and shaft diameter. Finishes include, but are not limited to, coating in vinyl, zinc (galvanized, including but not limited to electroplating or hot dipping one or more times), phosphate, cement, and paint. Certain steel nails may have one or more surface finishes. Head styles include, but are not limited to, flat, projection, cupped, oval, brad, headless, double, countersunk, and sinker. Shank styles include, but are not limited to, smooth, barbed, screw threaded, ring shank and fluted. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the nail using a tool that engages with the head. Point styles include, but are not limited to, diamond, needle, chisel and blunt or no point. Certain steel nails may be sold in bulk, or they may be collated in any manner using any material. --------------------------------------------------------------------------- \8\ The shaft length of certain steel nails with flat heads or parallel shoulders under the head shall be measured from under the head or shoulder to the tip of the point. The shaft length of all other certain steel nails shall be measured overall. --------------------------------------------------------------------------- Excluded from the scope of this investigation are certain steel nails packaged in combination with one or more non-subject articles, if the total number of nails of all types, in aggregate regardless of size, is less than 25. If packaged in combination with one or more non-subject articles, certain steel nails remain subject merchandise if the total number of nails of all types, in aggregate regardless of size, is equal to or greater than 25, unless otherwise excluded based on the other exclusions below. Also excluded from the scope are certain steel nails with a nominal shaft length of one inch or less that are (a) a component of an unassembled article, (b) the total number of nails is sixty (60) or less, and (c) the imported unassembled article falls into one of the following eight groupings: (1) Builders' joinery and carpentry of wood that are classifiable as windows, French-windows and their frames; (2) builders' joinery and carpentry of wood that are classifiable as doors and their frames and thresholds; (3) swivel seats with variable height adjustment; (4) seats that are convertible into beds (with the exception of those classifiable as garden seats or camping equipment); (5) seats of cane, osier, bamboo or similar materials; (6) other seats with wooden frames (with the exception of seats of a kind used for aircraft or motor vehicles); (7) furniture (other than seats) of wood (with the exception of (i) medical, surgical, dental or veterinary furniture; and ii) barbers' chairs and similar chairs, having rotating as well as both reclining and elevating movements); or (8) furniture (other than seats) of materials other than wood, metal, or plastics (e.g., furniture of cane, osier, bamboo or similar materials). The aforementioned imported unassembled articles are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 9403.89. Also excluded from the scope of this investigation are steel nails that meet the specifications of Type I, Style 20 nails as identified in Tables 29 through 33 of ASTM Standard F1667 (2013 revision). Also excluded from the scope of this investigation are nails suitable for use in powder-actuated hand tools, whether or not threaded, which are currently classified under HTSUS subheadings 7317.00.20.00 and 7317.00.30.00. Also excluded from the scope of this investigation are nails having a case hardness greater than or equal to 50 on the Rockwell Hardness C scale (HRC), a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point, suitable for use in gas-actuated hand tools. Also excluded from the scope of this investigation are corrugated nails. A corrugated nail is made up of a small strip of corrugated steel with sharp points on one side. Also excluded from the scope of this investigation are thumb tacks, which are currently classified under HTSUS subheading 7317.00.10.00. Certain steel nails subject to this investigation are currently classified under [[Page 28974]] HTSUS subheadings 7317.00.55.02, 7317.00.55.03, 7317.00.55.05, 7317.00.55.07, 7317.00.55.08, 7317.00.55.11, 7317.00.55.18, 7317.00.55.19, 7317.00.55.20, 7317.00.55.30, 7317.00.55.40, 7317.00.55.50, 7317.00.55.60, 7317.00.55.70, 7317.00.55.80, 7317.00.55.90, 7317.00.65.30, 7317.00.65.60 and 7317.00.75.00. Certain steel nails subject to this investigation also may be classified under HTSUS subheading 8206.00.00.00 or other HTSUS subheadings. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive. Appendix II--List of Topics in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Investigation IV. Scope Comments V. Discussion of the Issues VI. Recommendation [FR Doc. 2015-12248 Filed 5-19-15; 8:45 am] BILLING CODE 3510-DS-P
![28972 Federal Register / Vol. 80, No. 97 / Wednesday, May 20, 2015 / Notices
DEPARTMENT OF COMMERCE 16, 2015, the Department held a public complete version of the Issues and
hearing. Decision Memorandum can be accessed
International Trade Administration directly at http://enforcement.trade.gov.
Period of Investigation
[A–523–808] The signed and electronic versions of
The period of investigation (‘‘POI’’) is the Issues and Decision Memorandum
Certain Steel Nails From the Sultanate April 1, 2013 through March 31, 2014. are identical in content.
of Oman: Final Determination of Sales Scope of the Investigation Changes to the Margin Calculations
at Less Than Fair Value The product covered by this Since the Preliminary Determination
AGENCY: Enforcement and Compliance, investigation is certain steel nails from • We updated Oman Fasteners’
International Trade Administration, Oman. For a full description of the reported sales quantity as a result of
Department of Commerce. scope of the investigation, see Appendix minor corrections and findings at the
SUMMARY: The Department of Commerce I to this notice. verification.3
(‘‘the Department’’) determines that Since the Preliminary Determination, • We corrected the misspelled name
imports of certain steel nails (‘‘nails’’) several interested parties (i.e., IKEA of a variable in the U.S. sales database
from the Sultanate of Oman (‘‘Oman’’) Supply AG, The Home Depot, Target which was used in the calculation of the
are being sold in the United States at Corporation, and Petitioner) commented freight revenue cap.4
less than fair value (‘‘LTFV’’), as on the scope of these investigations. The • We excluded a sale with a sale date
provided in section 735 of the Tariff Act Department reviewed these comments prior to the beginning of the POI.5
of 1930, as amended (the ‘‘Act’’). The and made certain changes. For further • We updated the shipment dates and
final weighted-average dumping discussion, see the Issues and Decision the U.S. credit expense for certain sales
margins of sales at LTFV are listed Memorandum.2 The scope in Appendix as a result of findings at the
below in the section entitled ‘‘Final I reflects all modifications to the scope verification.6
made by the Department for this final • We adjusted the reported total cost
Determination Margins.’’
determination. of manufacturing of each control
DATES: Effective Date: May 20, 2015. number to reflect the revised per-unit
FOR FURTHER INFORMATION CONTACT: Lilit Verification scrap offset identified at the cost
Astvatsatrian, AD/CVD Operations, As provided in section 782(i) of the verification.7
Office IV, Enforcement and Compliance, Act, in January 2015, we verified the
International Trade Administration, Final Determination Margins
sales and cost information submitted by
U.S. Department of Commerce, 14th Oman Fasteners for use in our final The Department determines that the
Street and Constitution Avenue NW., determination. We used standard following weighted-average dumping
Washington, DC 20230; telephone: (202) verification procedures including an margins exist for the period April 1,
482–6412. examination of relevant accounting and 2013, through March 31, 2014:
SUPPLEMENTARY INFORMATION: production records, and original source
documents provided by Oman Weighted-
Background average
Fasteners. Exporter or producer dumping
On December 29, 2014, the margin
Department published in the Federal Analysis of Comments Received (percent)
Register the preliminary determination All issues raised in the case and
in the LTFV investigation of nails from rebuttal briefs by parties in this Oman Fasteners, LLC ................ 9.10
All Others .................................... 9.10
Oman.1 In the Preliminary investigation are addressed in the Issues
Determination, we postponed the final and Decision Memorandum All Others Rate
determination until no later than 135 accompanying this notice, and which is
days after the publication of the hereby adopted by this notice. A list of Section 735(c)(5)(A) of the Act
Preliminary Determination in the issues raised and to which the provides that the estimated ‘‘all others’’
accordance with section 735(a)(2)(A) of Department responded is attached to rate shall be an amount equal to the
the Act and 19 CFR 351.210(b)(2)(ii) and this notice as Appendix II. The Issues
3 See Memorandum to the File from Lilit
invited parties to comment on our and Decision Memorandum is a public
Astvatsatrian, International Trade Compliance
Preliminary Determination. document and is on file electronically Analyst, ‘‘Analysis Memorandum for the Final
The following events have occurred via Enforcement and Compliance’s Determination of the Antidumping Duty
since the Preliminary Determination. Antidumping and Countervailing Duty Investigation of Certain Steel Nails from the
Between January 19, 2015 and January Centralized Electronic Service System Sultanate of Oman: Oman Fasteners, LLC,’’ dated
concurrently with this determination (‘‘Final
29, 2015, the Department conducted (ACCESS). ACCESS is available to Analysis Memorandum’’), at pages 1–2 and
sales and cost verifications of the registered users at http:// Attachment 1; see also Verification of the Sales
mandatory respondent, Oman Fasteners, access.trade.gov. The Issues and Questionnaire Responses of Oman Fasteners, LLC:
LLC (‘‘Oman Fasteners’’). On March 10, Decision memorandum is available to Antidumping Duty Investigation of Certain Steel
Nails from the Sultanate of Oman, dated February
2015, Mid Continent Steel & Wire, Inc. all parties in the Central Records Unit, 27, 2015 (‘‘Verification Report’’), at page 2 and
(‘‘Petitioner’’), Oman Fasteners, and room 7046 of the main Department of Exhibit 1.
Overseas International Steel Industry, Commerce building. In addition, a 4 See Final Analysis Memorandum, at page 2 and
LLC (‘‘OISI’’), an interested party, Attachment 1 and IDM, at Comment 3.
5 See Final Analysis Memorandum, at page 2 and
submitted case briefs. On March 18, 2 See Memorandum to Christian Marsh, Deputy
mstockstill on DSK4VPTVN1PROD with NOTICES
Assistant Secretary for Antidumping and Attachment 1 and IDM, at Comment 5.
2015, Petitioner, Oman Fasteners, and 6 See Final Analysis Memorandum, at page 2 and
Countervailing Duty Operations, from Abdelali
OISI submitted rebuttal briefs. On April Elouaradia, Acting Office Director for Enforcement Attachment 1; IDM, at Comment 4, and Verification
and Compliance (Office VI), ‘‘Certain Steel Nails Report, at Exhibits VE–VIII.A–D and VE–VIII.F–G.
1 See Certain Steel Nails From the Sultanate of from the Sultanate of Oman: Issues and Decision 7 See Memorandum to the File from Robert B.
Oman: Affirmative Preliminary Determination of Memorandum for the Final Determination of Sales Greger, Verification of Oman Fasteners LLC in the
Sales at Less Than Fair Value and Postponement at Less Than Fair Value’’ (Issues and Decision Antidumping Duty Investigation of Certain Steel
of Final Determination, 79 FR 78034 (December 29, Memorandum), dated concurrently with this Nails from the Sultanate of Oman, dated February
2014) (‘‘Preliminary Determination’’). determination and hereby adopted by this notice. 18, 2015 at page 2.
VerDate Sep<11>2014 23:50 May 19, 2015 Jkt 235001 PO 00000 Frm 00044 Fmt 4703 Sfmt 4703 E:\FR\FM\20MYN1.SGM 20MYN1](https://thefederalregister.org/doc/80_FR_29069/page/1.svg)
![28974 Federal Register / Vol. 80, No. 97 / Wednesday, May 20, 2015 / Notices
HTSUS subheadings 7317.00.55.02, I. Abstract burden of the collection of information
7317.00.55.03, 7317.00.55.05, 7317.00.55.07, on respondents, including through the
7317.00.55.08, 7317.00.55.11, 7317.00.55.18, The Student Information System (SIS)
is designed to collect on-line use of automated collection techniques
7317.00.55.19, 7317.00.55.20, 7317.00.55.30, or other forms of information
7317.00.55.40, 7317.00.55.50, 7317.00.55.60, applications from students for NIST
7317.00.55.70, 7317.00.55.80, 7317.00.55.90, programs such as the Student Volunteer technology.
7317.00.65.30, 7317.00.65.60 and Program (SVP) and Summer High Comments submitted in response to
7317.00.75.00. Certain steel nails subject to this notice will be summarized and/or
School Intern Program (SHIP). The
this investigation also may be classified included in the request for OMB
purpose of the application is to obtain
under HTSUS subheading 8206.00.00.00 or approval of this information collection;
information needed to evaluate
other HTSUS subheadings. they also will become a matter of public
applicant qualifications for potential
While the HTSUS subheadings are record.
provided for convenience and customs positions.
The Student Information System is an Dated: May 15, 2015.
purposes, the written description of the
scope of this investigation is dispositive. online application which collects basic Glenna Mickelson,
biographical information about the Management Analyst, Office of the Chief
Appendix II—List of Topics in the student. The application contains four Information Officer.
Issues and Decision Memorandum sections. The first section collects [FR Doc. 2015–12175 Filed 5–19–15; 8:45 am]
I. Summary personal information to include name, BILLING CODE 3510–13–P
II. Background address, phone, email, program
III. Scope of the Investigation selection, work availability, and
IV. Scope Comments location preferences. The second section DEPARTMENT OF COMMERCE
V. Discussion of the Issues collects work and volunteer experience
VI. Recommendation including start and end date, hours National Oceanic and Atmospheric
[FR Doc. 2015–12248 Filed 5–19–15; 8:45 am] worked, name and address of employer, Administration
BILLING CODE 3510–DS–P supervisor’s contact information, job
Proposed Information Collection;
description, and job-related skills. The
Comment Request; Annual Economic
third section collects any special Survey of Federal Gulf and South
DEPARTMENT OF COMMERCE training, knowledge, skill, ability, and/ Atlantic Shrimp Permit Holders
or publications that demonstrate the
National Institute of Standards and applicant’s skill sets to perform a AGENCY: National Oceanic and
Technology position. The fourth section collects Atmospheric Administration (NOAA),
education information to include Commerce.
Proposed Information Collection;
Comment Request; Student current enrollment, name and address of ACTION: Notice.
Information System (SIS) the educational institution, grade point
average, and expected date of program SUMMARY: The Department of
completion. Commerce, as part of its continuing
AGENCY: National Institute of Standards
effort to reduce paperwork and
and Technology, Commerce. II. Method of Collection respondent burden, invites the general
ACTION: Notice. The information is collected via public and other Federal agencies to
NIST’s on-line Student Information take this opportunity to comment on
SUMMARY: The Department of System. proposed and/or continuing information
Commerce, as part of its continuing collections, as required by the
effort to reduce paperwork and III. Data Paperwork Reduction Act of 1995.
respondent burden, invites the general OMB Control Number: 0693–XXXX. DATES: Written comments must be
public and other Federal agencies to Form Number(s): None. submitted on or before July 20, 2015.
take this opportunity to comment on Type of Review: New collection. ADDRESSES: Direct all written comments
proposed and/or continuing information Affected Public: Individuals or to Jennifer Jessup, Departmental
collections, as required by the households. Paperwork Clearance Officer,
Paperwork Reduction Act of 1995. Estimated Number of Respondents:
Department of Commerce, Room 6616,
400.
DATES:Written comments must be 14th and Constitution Avenue NW.,
Estimated Time per Response: 45
submitted on or before July 20, 2015. Washington, DC 20230 (or via the
minutes.
ADDRESSES: Direct all written comments Estimated Total Annual Burden Internet at JJessup@doc.gov).
to Jennifer Jessup, Departmental Hours: 300 hours. FOR FURTHER INFORMATION CONTACT:
Paperwork Clearance Officer, Estimated Total Annual Cost to Requests for additional information or
Department of Commerce, Room 6616, Public: $0. copies of the information collection
14th and Constitution Avenue NW., instrument and instructions should be
IV. Request for Comments directed to Christopher Liese, Industry
Washington, DC 20230 (or via the
Internet at JJessup@doc.gov). Comments are invited on: (a) Whether Economist, SEFSC, NMFS, 75 Virginia
the proposed collection of information Beach Drive, Miami FL 33149, (305)
FOR FURTHER INFORMATION CONTACT: is necessary for the proper performance 365–4109 or Christopher.Liese@
Requests for additional information or of the functions of the agency, including noaa.gov.
copies of the information collection
mstockstill on DSK4VPTVN1PROD with NOTICES
whether the information shall have SUPPLEMENTARY INFORMATION:
instrument and instructions should be practical utility; (b) the accuracy of the
directed to Kristen Gilbert, Office of agency’s estimate of the burden I. Abstract
Human Resources Management, NIST, (including hours and cost) of the This request is for revision and
100 Bureau Dr., Mail Stop 1720, proposed collection of information; (c) extension of a currently approved
Gaithersburg, MD 20899–1080; 301– ways to enhance the quality, utility, and information collection.
975–3001; kristen.gilbert@nist.gov. clarity of the information to be NOAA Fisheries, Southeast Fisheries
SUPPLEMENTARY INFORMATION: collected; and (d) ways to minimize the Science Center, annually collects
VerDate Sep<11>2014 23:50 May 19, 2015 Jkt 235001 PO 00000 Frm 00046 Fmt 4703 Sfmt 4703 E:\FR\FM\20MYN1.SGM 20MYN1](https://thefederalregister.org/doc/80_FR_29069/page/3.svg)
Document Created: 2018-02-21 10:29:31
Document Modified: 2018-02-21 10:29:31
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Dates | Effective Date: May 20, 2015. | |
| Contact | Lilit Astvatsatrian, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482- 6412. | |
| FR Citation | 80 FR 28972 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR