80 FR 29342 - Curtis-Straus LLC: Application for Expansion of Recognition

DEPARTMENT OF LABOR
Occupational Safety and Health Administration

Federal Register Volume 80, Issue 98 (May 21, 2015)

Page Range		29342-29344
FR Document		2015-12287
In this notice, OSHA announces the application of Curtis- Straus LLC for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application.
Federal Register, Volume 80 Issue 98 (Thursday, May 21, 2015)
[Federal Register Volume 80, Number 98 (Thursday, May 21, 2015)]
[Notices]
[Pages 29342-29344]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2015-12287]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2009-0026]


Curtis-Straus LLC: Application for Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of Curtis-
Straus LLC for expansion of its recognition as a Nationally Recognized 
Testing Laboratory (NRTL) and presents the Agency's preliminary finding 
to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before June 5, 2015.

ADDRESSES: Submit comments by any of the following methods:
    1. Electronically: Submit comments and attachments electronically 
at http://www.regulations.gov, which is the Federal eRulemaking Portal. 
Follow the instructions online for making electronic submissions.
    2. Facsimile: If submissions, including attachments, are not longer 
than 10 pages, commenters may fax them to the OSHA Docket Office at 
(202) 693-1648.
    3. Regular or express mail, hand delivery, or messenger (courier) 
service: Submit comments, requests, and any attachments to the OSHA 
Docket Office, Docket No. OSHA-2009-0026, Technical Data Center, U.S. 
Department of Labor, 200 Constitution Avenue NW., Room N-2625, 
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays 
in receiving comments and other written materials by regular mail. 
Contact the OSHA Docket Office for information about security 
procedures concerning delivery of materials by express mail, hand 
delivery, or messenger service. The hours of operation for the OSHA 
Docket Office are 8:15 a.m.-4:45 p.m., e.t.
    4. Instructions: All submissions must include the Agency name and 
the OSHA docket number (OSHA-2009-0026). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials will be available online at 
http://www.regulations.gov. Therefore, the Agency cautions commenters 
about submitting statements they do not want made available to the 
public, or submitting comments that contain personal information 
(either about themselves or others) such as Social Security numbers, 
birth dates, and medical data.
    5. Docket: To read or download submissions or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection at the OSHA Docket Office. Contact the 
OSHA Docket Office for assistance in locating docket submissions.
    6. Extension of comment period: Submit requests for an extension of 
the comment period on or before June 5, 2015 to the Office of Technical 
Programs and Coordination Activities, Directorate of Technical Support 
and Emergency Management, Occupational Safety and Health 
Administration, U.S. Department of Labor, 200 Constitution Avenue NW., 
Room N-3655, Washington, DC 20210, or by fax to (202) 693-1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, 200 Constitution Avenue 
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; 
email: [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, 200 
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone: 
(202) 693-2110 or email: [email protected].

SUPPLEMENTARY INFORMATION: 

I. Notice of the Application for Expansion

    The Occupational Safety and Health Administration is providing 
notice that

[[Page 29343]]

Curtis-Straus LLC (CSL) is applying for expansion of its current 
recognition as an NRTL. CSL requests the addition of nine test 
standards to its NRTL scope of recognition.
    OSHA recognition of an NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within its 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by its 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The Agency processes applications by an NRTL for initial 
recognition and for an expansion or renewal of this recognition, 
following requirements in Appendix A to 29 CFR 1910.7. This appendix 
requires that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding. In the second notice, 
the Agency provides its final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational Web page for each NRTL, 
including CSL, which details the NRTL's scope of recognition. These 
pages are available from the OSHA Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
    CSL currently has one facility (site) recognized by OSHA for 
product testing and certification, with its headquarters located at: 
Curtis-Straus LLC, One Distribution Center Circle, Suite #1, Littleton, 
Massachusetts 01460. A complete list of CSL's scope of recognition is 
available at http://www.osha.gov/dts/otpca/nrtl/csl.html.

II. General Background on the Application

    CSL submitted two applications, one dated August 9, 2014, and one 
dated February 25, 2015 (CSL Exhibit 1--Expansion Application for Eight 
Standards and CSL Exhibit 2--Expansion Application for One Standard), 
to expand its recognition to include nine additional test standards. 
These two applications were combined. OSHA staff performed a 
comparability analysis and reviewed other pertinent information. OSHA 
performed an on-site review in relation to these applications on 
January 27, 2015 to January 28, 2015.
    Table 1 below lists the appropriate test standards found in CSL's 
applications for expansion for testing and certification of products 
under the NRTL Program.

 Table 1--Proposed Appropriate Test Standard for Inclusion in CSL's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
UL 1012...........................  Power Supplies.
UL 1310...........................  Direct Plug-In Transformer Units.
UL 60065..........................  Audio, Video and Similar Electronic
                                     Apparatus.
UL 60950-21.......................  Information Technology Equipment--
                                     Safety--Part 21: Remote Power
                                     Feeding.
UL 60950-22.......................  Information Technology Equipment--
                                     Safety--Part 22: Equipment to be
                                     Installed Outdoors.
UL 60950-23.......................  Information Technology Equipment--
                                     Safety--Part 23: Large Data Storage
                                     Equipment.
UL 62368-1........................  Audio/video, information and
                                     communication technology equipment--
                                     Part 1: Safety requirements.
UL 61010-2-030....................  Safety requirements for electrical
                                     equipment for measurement, control,
                                     and laboratory use--Part 2-030:
                                     Particular requirements for testing
                                     and measuring circuits.
UL 61010B-2-031...................  Electrical Equipment for
                                     Measurement, Control, and
                                     Laboratory Use; Part 2: Particular
                                     Requirements for Hand-Held Probe
                                     Assemblies for Electrical
                                     Measurement and Test.
------------------------------------------------------------------------

III. Preliminary Findings on the Application

    CSL submitted acceptable applications for expansion of its scope of 
recognition. OSHA's review of the application file, and on-site review, 
indicates that CSL can meet the requirements prescribed by 29 CFR 
1910.7 for expanding its recognition to include the addition of the 
test standards for NRTL testing and certification listed above. This 
preliminary finding does not constitute an interim or temporary 
approval of CSL's applications.
    OSHA welcomes public comment as to whether CSL meets the 
requirements of 29 CFR 1910.7 for expansion of its recognition as an 
NRTL. Comments should consist of pertinent written documents and 
exhibits. Commenters needing more time to comment must submit a request 
in writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if the request 
is not adequately justified. To obtain or review copies of the exhibits 
identified in this notice, as well as comments submitted to the docket, 
contact the Docket Office, Room N-2625, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials also are available online at http://www.regulations.gov under 
Docket No. OSHA-2009-0026.
    OSHA staff will review all comments to the docket submitted in a 
timely manner and, after addressing the issues raised by these 
comments, will recommend to the Assistant Secretary for Occupational 
Safety and Health whether to grant CSL's application for expansion of 
its scope of recognition. The Assistant Secretary will make the final 
decision on granting the application. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of its final decision in the 
Federal Register.

Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW., 
Washington, DC 20210, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.


[[Page 29344]]


    Signed at Washington, DC, on May 15, 2015.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2015-12287 Filed 5-20-15; 8:45 am]
BILLING CODE 4510-26-P
29344 Federal Register / Vol. 80, No. 98 / Thursday, May 21, 2015 / Notices

Signed at Washington, DC, on May 15, online at http://www.regulations.gov. in Shipyards Standard protect workers
2015. For further information on submitting from the adverse health effects that may
David Michaels, comments see the ‘‘Public result from occupational exposure to
Assistant Secretary of Labor for Occupational Participation’’ heading in the section of asbestos. The major information
Safety and Health. this notice titled SUPPLEMENTARY collection requirements in the standard
[FR Doc. 2015–12287 Filed 5–20–15; 8:45 am] INFORMATION. include: implementing an exposure-
BILLING CODE 4510–26–P Docket: To read or download monitoring program that informs
comments or other material in the workers of their exposure-monitoring
docket, go to http://www.regulations.gov results; ensuring notification of on-site
DEPARTMENT OF LABOR or the OSHA Docket Office at the employers, at multi-employer worksites,
address above. All documents in the when establishing regulated areas for
Occupational Safety and Health docket (including this Federal Register work performed with asbestos-
Administration notice) are listed in the http:// containing materials (ACMs) and/or
[Docket No. OSHA–2012–0009] www.regulations.gov index; however, presumed asbestos-containing materials
some information (e.g., copyrighted (PACMs), of the requirements for such
The Asbestos in Shipyards Standard; material) is not publicly available to regulated areas, and the measures
Extension of the Office of Management read or download from the Web site. All necessary to protect workers from
and Budget’s Approval of Information submissions, including copyrighted overexposure; providing medical
Collection (Paperwork) Requirements material, are available for inspection surveillance for workers potentially
and copying at the OSHA Docket Office. exposed to ACMs and/or PACMs,
AGENCY: Occupational Safety and Health including administering a worker
You may also contact Theda Kenney at
Administration (OSHA), Labor. medical questionnaire, providing
the address below to obtain a copy of
ACTION: Request for public comments. the ICR. information to the examining physician,
SUMMARY: OSHA solicits public FOR FURTHER INFORMATION CONTACT: and providing the physician’s written
comments concerning its proposal to Theda Kenney or Todd Owen, opinion to the worker; and maintaining
extend the Office of Management and Directorate of Standards and Guidance, records of objective data used for
Budget’s (OMB) approval of the OSHA, U.S. Department of Labor, Room exposure determinations, worker
information collection requirements N–3609, 200 Constitution Avenue NW., exposure monitoring and medical
specified in the Asbestos in Shipyards Washington, DC 20210; telephone (202) surveillance records, training records,
Standard (29 CFR 1915.1001). 693–2222. the record (i.e., information, data, and
SUPPLEMENTARY INFORMATION:
analyses) used to demonstrate that
DATES: Comments must be submitted
PACMs do not contain asbestos, and
(postmarked, sent, or received) by July
I. Background notifications made, as well as received
20, 2015.
The Department of Labor, as part of its by building or facility owners regarding
ADDRESSES:
continuing effort to reduce paperwork the content of ACMs and/or PACMs.
Electronically: You may submit
comments and attachments and respondent (i.e., employer) burden, II. Special Issues for Comment
electronically at http:// conducts a preclearance consultation
OSHA has a particular interest in
www.regulations.gov, which is the program to provide the public with an
comments on the following issues:
Federal e-Rulemaking Portal. Follow the opportunity to comment on proposed • Whether the proposed information
instructions online for submitting and continuing information collection collection requirements are necessary
comments. requirements in accord with the for the proper performance of the
Facsimile: If your comments, Paperwork Reduction Act of 1995 Agency’s functions, including whether
including attachments, are not longer (PRA–95) (44 U.S.C. 3506(c)(2)(A)). the information is useful;
than 10 pages you may fax them to the This program ensures that • The accuracy of OSHA’s estimate of
OSHA Docket Office at (202) 693–1648. information is in the desired format, the burden (time and costs) of the
Mail, hand delivery, express mail, reporting burden (time and costs) is information collection requirements,
messenger, or courier service: When minimal, collection instruments are including the validity of the
using this method, you must submit a clearly understood, and OSHA’s methodology and assumptions used;
copy of your comments and attachments estimate of the information collection • The quality, utility, and clarity of
to the OSHA Docket Office, Docket No. burden is accurate. The Occupational the information collected; and
OSHA–2012–0009, Occupational Safety Safety and Health Act of 1970 (the OSH • Ways to minimize the burden on
and Health Administration, U.S. Act) (29 U.S.C. 651 et seq.) authorizes employers who must comply; for
Department of Labor, Room N–2625, information collection by employers as example, by using automated or other
200 Constitution Avenue NW., necessary or appropriate for technological information collection
Washington, DC 20210. Deliveries enforcement of the OSH Act or for and transmission techniques.
(hand, express mail, messenger, and developing information regarding the
courier service) are accepted during the causes and prevention of occupational III. Proposed Actions
Department of Labor’s and Docket injuries, illnesses, and accidents (29 OSHA is proposing a reduction in the
Office’s normal business hours, 8:15 U.S.C. 657). The OSH Act also requires information collection requirements
a.m. to 4:45 p.m., e.t. that OSHA obtain such information contained in the Asbestos in Shipyards
Instructions: All submissions must with minimum burden upon employers, Standard (29 CFR 1915.1001). The
tkelley on DSK3SPTVN1PROD with NOTICES

include the Agency name and the OSHA especially those operating small adjustment is primarily the result of the
docket number (OSHA–2012–0009) for businesses, and to reduce to the removal of the training requirements
the Information Collection Request maximum extent feasible unnecessary from the ICR, which is not considered
(ICR). All comments, including any duplication of efforts in obtaining a paperwork burden for employers as
personal information you provide, are information (29 U.S.C. 657). associated training is conducted and
placed in the public docket without The information collection documented by an EPA-approved or
change, and may be made available requirements specified in the Asbestos state-approved provider. Thus, despite a

VerDate Sep<11>2014 20:28 May 20, 2015 Jkt 235001 PO 00000 Frm 00046 Fmt 4703 Sfmt 4703 E:\FR\FM\21MYN1.SGM 21MYN1
Document Created: 2018-10-24 10:26:42
Document Modified: 2018-10-24 10:26:42
Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Notices
Action		Notice.
Dates		Submit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before June 5, 2015.
Contact		Information regarding this notice is available from the following sources:
FR Citation		80 FR 29342
80 FR 29342 - Curtis-Straus LLC: Application for Expansion of Recognition

DEPARTMENT OF LABOROccupational Safety and Health Administration

Federal Register Volume 80, Issue 98 (May 21, 2015)

DEPARTMENT OF LABOR
Occupational Safety and Health Administration
