Page Range | 31371-31375 | |
FR Document | 2015-13418 |
[Federal Register Volume 80, Number 105 (Tuesday, June 2, 2015)] [Notices] [Pages 31371-31375] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2015-13418] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2015-0184; FRL-9927-92] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from April 1, 2015 to April 29, 2015. DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 2, 2015. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2015-0184, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD, 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 202-564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that may apply to this action. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from April 1, 2015 to April 29, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the agency's authority for taking this action? Section 5 of TSCA requires that EPA periodical publish in the Federal Register receipt and status reports, which cover the following EPA activities required by provisions of TSCA section 5. EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. [[Page 31372]] IV. Receipt and Status Reports In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity. Table I--63 PMNs Received From 04/01/2015 to 04/29/2015 ---------------------------------------------------------------------------------------------------------------- Projected Case No. Received notice end Manufacturer/ Use Chemical date date Importer ---------------------------------------------------------------------------------------------------------------- P-15-0311............ 2/23/2015 5/24/2015 CBI................. (G) Material for (G) photosensitive Triarylsulfonium resin. salt with haloalkyl phosphate. P-15-0377............ 4/1/2015 6/30/2015 PCCR USA, Inc....... (S) Plasticizer in (S) 1,2,4- automotive parts. Benzenetricarboxyl ic acid, 1,2,4- trionyl ester. P-15-0378............ 4/3/2015 7/2/2015 Allnex USA, Inc..... (S) Dual cure/UV (G) Alkoxylated cure adhesion/ substituted alkyl barrier coating for alkenoate polymer wood substrates. with disubstituted alkane. P-15-0379............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic acid. P-15-0379............ 4/3/2015 7/2/2015 CBI................. (G) Industrial...... (G) Polyitaconic acid. P-15-0379............ 4/3/2015 7/202015 CBI................. (G) Home care....... (G) Polyitaconic acid. P-15-0380............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic acid, potassium salt. P-15-0381............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic acid, ammonium salt. P-15-0382............ 4/3/2015 7/2/2015 CBI................. (G) Industrial...... (G) Polyitaconic acid, sodium zinc salt. P-15-0383............ 4/3/2015 7/2/2015 CBI................. (G) Agricultural.... (G) Polyitaconic acid, partially decarboxylated. P-15-0384............ 4/6/2015 7/5/2015 CBI................. (G) Open, non- (G) Azo Dyestuff. dispersive. P-15-0385............ 4/6/2015 7/5/2015 CBI................. (G) Candle component (G) Hydrogenated oil. P-15-0386............ 4/6/2015 7/5/2015 CBI................. (G) Ingredient for (S) 2-cyclohexen-1- consumer products. ol, 2-methyl-5-(1- Dispersive use. methylethenyl)-, 1- acetate, (1r,5r)- *. P-15-0389............ 4/8/2015 7/7/2015 Shin Etsu Silicones (S) Silylating agent (S) 2-Propenoic of America. acid, 2-ethylhexyl ester, reaction products with dimethoxymethylsil ane. P-15-0389............ 4/8/2015 7/7/2015 Shin Etsu Silicones (S) Additive for (S) 2-Propenoic of America. silicone RTV rubber acid, 2-ethylhexyl compounds. ester, reaction products with dimethoxymethylsil ane. P-15-0390............ 4/8/2015 7/7/2015 CBI................. (G) Lens material (G) Substituted for use in carbopolycyclic electronic dicarboxylic acid applications. dialkyl ester, polymer with dialkyl carbopolycyclic ester alkanediol and carbopolycyclic bis (substituted carbomonocycle). P-15-0391............ 4/9/2015 7/8/2015 ICL-IP America, Inc. (G) The major (G) Organic salt. intended use of BCA13 is as electrolytes for energy storage flow batteries. The energy storage flow batteries are for industries use.. P-15-0392............ 4/9/2015 7/8/2015 Polynt S.p.A........ (S) Plasticizer for (S) 1,2,4- pvc powders for car Benzenetricarboxyl interiors. ic acid, mixed manufacturing; decyl and octyl plasticizer for pvc triesters*. compounds for cables. P-15-0393............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic acid, polymer with Alkanediol, .alpha.-hydro- omega.- ohydroxypoly[oxy(a lkyl)] and alkyl aromatic diisocyanate. P-15-0394............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic acid, polymer with Alkanediol, .alpha.-hydro- omega.- hydroxypoly(oxy- alkanediyll, aromaticfurandione and alkylaromaticdiiso cy anate. P-15-0395............ 4/9/2015 7/8/2015 CBI................. (G) Adhesive........ (G) Alkanedioic acid, polymer with Alkanediol, .alpha.-hydro- .omega.- hydroxypoly(oxy- alkanediyl), aromaticfuranedion e and alkylaromatic diisocyanate. P-15-0396............ 4/10/2015 7/9/2015 CBI................. (G) Resin for (G) automotive coatings. Alkylmethacrylate, polymer with alkenylbenzene, branched alkylmethacrylate, hydroxyalkylmethac rylate and acrylic acid, T-butyl alkaneperoxoic acid ester- initiated. [[Page 31373]] P-15-0397............ 4/10/2015 7/9/2015 CBI................. (G) Industrial roll (G) coat construction Alkylmethacrylate, adhesive. polymer with alkenylbenzene, branched- alkylmethacrylate and hydroxyalkylmethac rylate, T-butyl alkaneperoxoic acid ester- initiated. P-15-0398............ 4/10/2015 7/9/2015 CBI................. (G) Resin for (G) Cycloalkyl solvent borne dicarboxylic coatings. anhydride, polymer with tetrahydroxyalkyl, saturated fatty ester, and branched alkyl glycidyl ester. P-15-0399............ 4/10/2015 7/9/2015 CBI................. (G) Paint component. (G) Alkylbenzene sulfonic acid salt of n-(3- (trialkylamino)alk yl)alkylacrylamide , polymer with alkyl alkylacrylate and alkylated bicycloalkyl alkylacrylate. P-15-0400............ 4/10/2015 7/9/2015 CBI................. (G) Paint component. (G) Alkylbenzene sulfonic acid salt of n-(3- (trialkylamino)alk yl)alkylacrylamide , polymer with alkyl alkylacrylate and alkylated bicycloalkyl alkylacrylate. P-15-0401............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer resin formulations. P-15-0402............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer resin formulations. P-15-0403............ 4/11/2015 7/10/2015 Trinity (G) Soil fumigant (G) Ethoxylated Manufacturing, Inc. additive allowing amine phosphate emulsification of ester. liquid soil fumigants (dispersive use). P-15-0404............ 4/10/2015 7/9/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer resin formulations. P-15-0405............ 4/13/2015 7/12/2015 Evonik Corporation.. (S) Base polymer for (S) Poly[oxy(methyl- use in parquet 1, 2-ethanediyl)], adhesive .alpha.-hydro- formulations; base .omega.-hydroxy-, polymer for use in polymer with 5- misc. adhesive isocyanato-1- formulations. (isocyanatomethyl)- 1,3,3- trimethylcyclohexa ne, n-[3- (trimethoxysily)pr opyl]-1-butanamine- blocked*. P-15-0408............ 4/13/2015 7/12/2015 CBI................. (G) Ingredient in (G) Aqueous industrial adhesive. polyurethane dispersion. P-15-0409............ 4/14/2015 7/13/2015 CBI................. (S) Hydrogen Sulfide (G) Substituted Scavenger. alkanolamine ether. P-15-0410............ 4/14/2015 7/13/2015 CBI................. (G) MDI prepolymer (G) MDI Prepolymer. for Cast Elastomers. P-15-0411............ 4/15/2015 7/14/2015 CBI................. (G) Additive in (G) Fatty acid aqueous solutions. esters with polyols polyalkyl ethers. P-15-0412............ 4/15/2015 7/14/2015 CBI................. (G) Cross Linking (G) Perfluorinated Agent. alkyl diene. P-15-0414............ 4/17/2015 7/16/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer resin formulations. P-15-0415............ 4/17/2015 7/16/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer resin formulations. P-15-0416............ 4/17/2015 7/16/2015 CBI................. (G) Urethane coating (G) Aromatic isocyanate, polymer with aromatic diamine, alkyloxirane, alkyloxirane polymer with oxirane ether with alkyltriol (3:1 ), and oxirane. P-15-0417............ 4/17/2015 7/16/2015 CBI................. (G) Urethane coating (G) Aromatic isocyanate, polymer with aromatic diamine, alkyloxirane, alkyloxirane polymer with poly alkylene glycol. P-15-0418............ 4/17/2015 7/16/2015 CBI................. (S) Water clarifying (G) Alkyl peroxide. agent, odor control agent, bleaching. agent, and general oxidant for water treatment. P-15-0418............ 4/17/2015 7/16/2015 CBI................. (G) Destructive use (G) Alkyl peroxide. in fuel production. P-15-0419............ 4/20/2015 7/19/2015 CBI................. (G) Flame retardant (G) 2,2-bis[3',5'- material. dihaloo-4'- haloalkyloxy Carbomonocycle] propane. [[Page 31374]] P-15-0421............ 4/21/2015 7/20/2015 CBI................. (G) Intermediate.... (G) Alkoxysilane. P-15-0422............ 4/21/2015 7/20/2015 CBI................. (S) Reactive polymer (G) Amine modified in 2 part epoxy epoxy resin. adhesive. P-15-0423............ 4/21/2015 7/20/2015 Carbon 3D, Inc...... (G) Oligomeric (G) Urethane component of 3D oligomer. printer. P-15-0424............ 4/21/2015 ........... Colonial Chemical, (S) Intermediate to (S) D- Inc. make polymers. glucopyranose, oligomeric, bu glycosides, polymers with epichlorohydrin*. P-15-0425............ 4/21/2015 7/20/2015 Colonial Chemical, (S) Intermediate to (S) D- Inc. make polymers. glucopyranoside, hexyl, polymer with 2- (chloromethyl) oxirane*. P-15-0426............ 4/21/2015 7/20/2015 Colonial Chemical, (S) Viscosity (S) Tetradecanoic Inc. control in hard acid, compd. with surface cleaners. 1,1'-iminobid [2- propanol] (1:1) (9ci)*. P-15-0427............ 4/22/2015 7/21/2015 CBI................. (G) Resin for (G) Substituted coatings. alkylene carbomonocycle, homopolymer, substituted polyol and mono alkyl ether-blocked polyol. P-15-0428............ 4/23/2015 7/22/2015 ICL-IP America, Inc. (G) The major (G) Alkyl intended use of pyridinium BCA13 is as bromide. electrolytes for energy storage flow batteries. The energy storage flow batteries are for industries use. P-15-0429............ 4/23/2015 7/22/2015 CBI................. (G) HAPS free, (G) Siloxanes and silicone based silicones, alkoxy resin for the Me, polymers with manufacture of Me ambient curing. silsesquioxanes, alkoxy-terminated industrial coatings, such as anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques and electric and gas heaters as well as other large industrial objects and equipment. P-15-0430............ 4/23/2015 7/22/2015 CBI................. (G) Papermaking (G) Poly(alkyl additive. amine) copolymer. P-15-0431............ 4/24/2015 7/23/2015 CBI................. (G) Alkyd polymeric (G) C16 18 and C18- additive for unsaturated, industrial coatings. polymer with alkyl triol and acid anhydride. P-15-0433............ 4/26/2015 7/25/2015 CBI................. (G) Lubricant (G) Chlorinated additive. complex ester. P-15-0435............ 4/27/2015 7/26/2015 CBI................. (G) Open, non- (G) 2,7- dispersive. Naphthalenedisulfo nic acid, 4-amino- 3-[substituted]-5- hydroxy-6-[(1e)-2- phenyldiazenyl]-, lithium salt (1:3). P-15-0436............ 4/28/2015 7/27/2015 CBI................. (G) Stain block, (G) Anionic aqueous surfactant, and fluorochemical antiblock agent. dispersion. P-15-0437............ 4/28/2015 7/27/2015 Henkel Corporation.. (S) A curable (G) Flexible component of Polyurethane adhesive Methacrylate formulations. Resin. P-15-0438............ 4/29/2015 7/28/2015 CBI................. (G) A destructive (G) Zinc use in the carboxylate. manufacture of coating materials and fuels. P-15-0439............ 4/29/2015 7/28/2015 Perstorp Polyols, (S) Adhesives for (S) 1,4-Dioxane-2,5- Inc. industrial dione, 3,6- packaging dimethyl-, (3S,6S)- applications. , polymer with 2- oxepanone. P-15-0440............ 4/29/2015 7/28/2015 CBI................. (G) Adhesion (G) Hetero modifier. substituted alkyl acrylate polymer. P-15-0441............ 4/29/2015 7/28/2015 CBI................. (G) Intermediate.... (G) Xanthate reactive hydrophilic polymer. ---------------------------------------------------------------------------------------------------------------- In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity. Table II--22 NOCs Received From 04/01/2015 to 04/29/2015 ------------------------------------------------------------------------ Commencement Case No. Received date notice end Chemical date ------------------------------------------------------------------------ P-14-0057........ 4/7/2015 3/10/2015 (G) Glycerides, C8- C18 and C18 unsaturated, from algal fermentation. P-14-0513........ 4/9/2015 3/13/2015 (G) Bisxylenol diglycidyl ether polymer. [[Page 31375]] P-14-0831........ 4/15/2015 3/19/2015 (G) Fatty acids, polymers with acrylic monomers, bisphenol a, 2- ethoxyethanol, epichlorohydrin and styrene, alkyl peroxide-initiated, cmpds. with triethylamine. P-14-0832........ 4/15/2015 3/19/2015 (G) Fatty acids, polymers with acrylic monomers, bisphenol A, modified oil, epichlorohydrin and styrene, alkyl peroxide-initiated, compounds with triethylamine. P-15-0115........ 4/1/2015 3/25/2015 (G) Phenol-biphenyl- formaldehyde polycondensate. P-15-0116........ 4/1/2015 3/25/2015 (G) Polymer of phenol, biphenyl and resorcinol. P-15-0131........ 4/8/2015 3/25/2015 (S) Acetic acid ethenyl ester, polymer with 1- ethenyl-2- pyrrolidinone, hydrolyzed*. P-14-0677........ 4/17/2015 3/25/2015 (G) Polyester acrylate. P-15-0151........ 4/3/2015 3/27/2015 (G) Glycidyl ester methacrylate, polymer with alkyl acrylate, and styrene, 2- propenoate. P-14-0571........ 4/4/2015 3/30/2015 (G) Hydroxy tetra alkyl esters of trialkyl alkanoic acid with cycloaminoethanol. P-15-0055........ 4/6/2015 3/31/2015 (G) Aromatic isocyanate, polxmer with alkyloxirane polymer with oxirane ether with polyfunctional alcohol, and alkyloxirane polymer with oxirane ether with triol (3:1). P-15-0093........ 4/20/2015 4/1/2015 (G) Aromatic polymer salt. P-12-0354........ 4/6/2015 4/2/2015 (S) 1,3-Propanediol, 2-ethyl-2- (hydroxymethyl)-, polymer with 1,6- diisocyanatohexane and 5-isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexane , 3,5-dimethyl-1h- pyrazole-and 3- hydroxy-2,2- dimethylpropanoic acid-blocked, compds with 2- (dimethylamino) ethanol*. P-15-0156........ 4/10/2015 4/6/2015 (G) Amine modified epoxy resin. P-14-0679........ 4/17/2015 4/6/2015 (G) 2- (Dimethylamino)ethyl methyl-2-propanoate, polymer with alkyl- substituted methyl-2- propanoate and aryl- substituted methyl-2- propanoate, salt with phosphorylated caprolactone, alkyloxoheteromonocy cle and polyalkylene polyol alkyl ether. P-13-0569........ 4/14/2015 4/10/2015 (S) 5H- cyclopenta[h]quinazo line, 6,6a,7,8,9,9a- hexahydro-7,7,8,9,9- pentamethyl-*. P-14-0862........ 4/23/2015 4/10/2015 (G) Furanose ester. P-15-0108........ 4/16/2015 4/14/2015 (G) Urethane acrylate. P-15-0119........ 4/16/2015 4/14/2015 (G) Ester acrylate. P-15-0175........ 4/22/2015 4/14/2015 (G) Carbamic acid, hydroxyalkyl ester, polymer with hydroxyalkyl carbamate and alkylisocyanate, alkoxyethanol- blocked. P-14-0561........ 4/24/2015 4/21/2015 (S) D-glucopyranose, oligomeric, decyl octyl glycosides, polymers with epichlorohydrin*. J-14-0010........ 4/25/2015 4/15/2015 (G) Trichoderma reesei 5347, producing beta- glucosidase. ------------------------------------------------------------------------ If you are interested in information that is not included in these tables, you may contact EPA as described in Unit III. to access additional non-CBI information that may be available. Authority: 15 U.S.C. 2601 et seq. Dated: May 27, 2015. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-13418 Filed 6-1-15; 8:45 am] BILLING CODE 6560-50-P
Category | Regulatory Information | |
Collection | Federal Register | |
sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
Publisher | Office of the Federal Register, National Archives and Records Administration | |
Section | Notices | |
Action | Notice. | |
Dates | Comments identified by the specific PMN number or TME number, must be received on or before July 2, 2015. | |
Contact | For technical information contact: Jim Rahai, IMD, 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 202-564-8593; email | |
FR Citation | 80 FR 31371 |