80 FR 37247 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Nine Metal Fabrication and Finishing Sources (Renewal)

ENVIRONMENTAL PROTECTION AGENCY

Federal Register Volume 80, Issue 125 (June 30, 2015)

Page Range		37247-37247
FR Document		2015-16036

The Environmental Protection Agency has submitted an information collection request (ICR), ``NESHAP for Nine Metal Fabrication and Finishing Sources (40 CFR part 63, subpart XXXXXX) (Renewal)'' (EPA ICR No. 2298.04, OMB Control No. 2060-0622), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). This is a proposed extension of the ICR, which is currently approved through June 30, 2015. Public comments were previously requested via the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may neither conduct nor sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number.

Federal Register, Volume 80 Issue 125 (Tuesday, June 30, 2015)

[Federal Register Volume 80, Number 125 (Tuesday, June 30, 2015)]
[Notices]
[Page 37247]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2015-16036]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0098; FRL-9929-18-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Nine Metal Fabrication and 
Finishing Sources (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency has submitted an 
information collection request (ICR), ``NESHAP for Nine Metal 
Fabrication and Finishing Sources (40 CFR part 63, subpart XXXXXX) 
(Renewal)'' (EPA ICR No. 2298.04, OMB Control No. 2060-0622), to the 
Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). 
This is a proposed extension of the ICR, which is currently approved 
through June 30, 2015. Public comments were previously requested via 
the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day 
comment period. This notice allows for an additional 30 days for public 
comments. A fuller description of the ICR is given below, including its 
estimated burden and cost to the public. An Agency may neither conduct 
nor sponsor, and a person is not required to respond to, a collection 
of information unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before July 30, 2015.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0098, to: (1) EPA online using www.regulations.gov (our 
preferred method), by email to [email protected], or by mail to: EPA 
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 
Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to 
[email protected]. Address comments to OMB Desk Officer for 
EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax 
number: (202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail 
the information that the EPA will be collecting are available in the 
public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The regulation applies to nine metal fabrication and 
finishing area source categories: (1) Electrical and Electronic 
Equipment Finishing Operations; (2) Fabricated Metal Products; (3) 
Fabricated Plate Work (Boiler Shops); (4) Fabricated Structural Metal 
Manufacturing; (5) Heating Equipment, except Electric; (6) Industrial 
Machinery and Equipment Finishing Operations; (7) Iron and Steel 
Forging; (8) Primary Metal Products Manufacturing; and (9) Valves and 
Pipe Fittings. The final rule establishes emission standards in the 
form of management practices and equipment standards for new and 
existing operations of dry abrasive blasting, machining, dry grinding 
and dry polishing with machines, spray painting and other spray 
coating, and welding operations. These standards reflect EPA's 
determination regarding the generally achievable control technology 
and/or management practices for the nine area source categories.
    Form Numbers: None.
    Respondents/affected entities: Owners and operators of facilities 
in the nine metal fabrication and finishing source categories.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart XXXXXX).
    Estimated number of respondents: 5,800 (total).
    Frequency of response: Initially, occasionally and annually.
    Total estimated burden: 35,700 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $3,600,000 (per year), which includes $0 for 
both annualized capital and operation & maintenance costs.
    Changes in the Estimates: There is an adjustment increase in the 
estimated burden as currently identified in the OMB Inventory of 
Approved Burdens. The previous ICR incorrectly carried over burdens and 
costs from initial activities and divided the total number of 
respondents by three. This ICR is corrected to reflect the annual, on-
going burden and costs for existing facilities. In addition, the use of 
more updated labor rates results in an increase in total labor costs. 
The overall result is an increase in burden hours and costs.

Courtney Kerwin,
Acting Director, Collection Strategies Division.
[FR Doc. 2015-16036 Filed 6-29-15; 8:45 am]
 BILLING CODE 6560-50-P

Federal Register / Vol. 80, No. 125 / Tuesday, June 30, 2015 / Notices 37247

Form Numbers: None. Sources (40 CFR part 63, subpart public docket, visit: http://
Respondents/affected entities: XXXXXX) (Renewal)’’ (EPA ICR No. www.epa.gov/dockets.
Polyvinyl chloride and copolymer 2298.04, OMB Control No. 2060–0622), Abstract: The regulation applies to
production area source facilities. to the Office of Management and Budget nine metal fabrication and finishing area
Respondent’s obligation to respond: (OMB) for review and approval in source categories: (1) Electrical and
Mandatory (40 CFR part 63, subpart accordance with the Paperwork Electronic Equipment Finishing
DDDDDD). Reduction Act (44 U.S.C. 3501 et seq.). Operations; (2) Fabricated Metal
Estimated number of respondents: 3 This is a proposed extension of the ICR, Products; (3) Fabricated Plate Work
(total). which is currently approved through (Boiler Shops); (4) Fabricated Structural
Frequency of response: Initially, June 30, 2015. Public comments were Metal Manufacturing; (5) Heating
semiannually and annually. previously requested via the Federal Equipment, except Electric; (6)
Total estimated burden: 69,200 hours Register (79 FR 30117) on May 27, 2014 Industrial Machinery and Equipment
(per year). Burden is defined at 5 CFR during a 60-day comment period. This Finishing Operations; (7) Iron and Steel
1320.3(b). notice allows for an additional 30 days Forging; (8) Primary Metal Products
Total estimated cost: $7,770,000 (per for public comments. A fuller Manufacturing; and (9) Valves and Pipe
year), includes $806,000 annualized description of the ICR is given below, Fittings. The final rule establishes
capital or operation & maintenance including its estimated burden and cost emission standards in the form of
costs. to the public. An Agency may neither management practices and equipment
Changes in the Estimates: There is an conduct nor sponsor, and a person is standards for new and existing
adjustment increase in the estimated not required to respond to, a collection operations of dry abrasive blasting,
burden as currently identified in the of information unless it displays a machining, dry grinding and dry
OMB Inventory of Approved Burdens. currently valid OMB control number. polishing with machines, spray painting
In consulting with the Vinyl Institute DATES: Additional comments may be and other spray coating, and welding
during the renewal of this ICR, EPA submitted on or before July 30, 2015. operations. These standards reflect
received comprehensive comments on EPA’s determination regarding the
ADDRESSES: Submit your comments,
the burden associated with specific generally achievable control technology
reporting and recordkeeping referencing Docket ID Number EPA–
HQ–OECA–2014–0098, to: (1) EPA and/or management practices for the
requirements, including, but not limited nine area source categories.
to, performance test, monitor online using www.regulations.gov (our
preferred method), by email to Form Numbers: None.
installation, resin and wastewater
docket.oeca@epa.gov, or by mail to: EPA Respondents/affected entities:
sampling, equipment leak and process
Docket Center, Environmental Owners and operators of facilities in the
vent monitoring. We have updated the
Protection Agency, Mail Code 28221T, nine metal fabrication and finishing
burden items to more accurately reflect
1200 Pennsylvania Ave. NW., source categories.
the costs incurred by the industry. The
update results in a substantial increase Washington, DC 20460; and (2) OMB via Respondent’s obligation to respond:
in the respondent labor hours, labor email to oira_submission@omb.eop.gov. Mandatory (40 CFR part 63, subpart
costs, and capital/O&M costs. There is Address comments to OMB Desk Officer XXXXXX).
also a small increase in the number of for EPA. Estimated number of respondents:
responses as we have updated the EPA’s policy is that all comments 5,800 (total).
number of subject area sources from two received will be included in the public Frequency of response: Initially,
to three based on data provided by the docket without change including any occasionally and annually.
Vinyl Institute. personal information provided, unless
Total estimated burden: 35,700 hours
the comment includes profanity, threats,
Courtney Kerwin, (per year). Burden is defined at 5 CFR
information claimed to be Confidential
1320.3(b).
Acting Director, Collection Strategies Business Information (CBI), or other
Division. information whose disclosure is Total estimated cost: $3,600,000 (per
[FR Doc. 2015–16037 Filed 6–29–15; 8:45 am] restricted by statute. year), which includes $0 for both
BILLING CODE 6560–50–P
annualized capital and operation &
FOR FURTHER INFORMATION CONTACT:
maintenance costs.
Patrick Yellin, Monitoring, Assistance,
and Media Programs Division, Office of Changes in the Estimates: There is an
ENVIRONMENTAL PROTECTION Compliance, Mail Code 2227A, adjustment increase in the estimated
AGENCY Environmental Protection Agency, 1200 burden as currently identified in the
Pennsylvania Ave. NW., Washington, OMB Inventory of Approved Burdens.
[EPA–HQ–OECA–2014–0098; FRL–9929–
18–OEI] DC 20460; telephone number: (202) The previous ICR incorrectly carried
564–2970; fax number: (202) 564–0050; over burdens and costs from initial
Information Collection Request email address: yellin.patrick@epa.gov. activities and divided the total number
Submitted to OMB for Review and of respondents by three. This ICR is
SUPPLEMENTARY INFORMATION: corrected to reflect the annual, on-going
Approval; Comment Request; NESHAP
Supporting documents which explain in burden and costs for existing facilities.
for Nine Metal Fabrication and
detail the information that the EPA will In addition, the use of more updated
Finishing Sources (Renewal)
be collecting are available in the public
asabaliauskas on DSK5VPTVN1PROD with NOTICES

labor rates results in an increase in total
AGENCY: Environmental Protection docket for this ICR. The docket can be labor costs. The overall result is an
Agency (EPA). viewed online at www.regulations.gov increase in burden hours and costs.
ACTION: Notice. or in person at the EPA Docket Center,
WJC West, Room 3334, 1301 Courtney Kerwin,
SUMMARY: The Environmental Protection Constitution Ave. NW., Washington, Acting Director, Collection Strategies
Agency has submitted an information DC. The telephone number for the Division.
collection request (ICR), ‘‘NESHAP for Docket Center is 202–566–1744. For [FR Doc. 2015–16036 Filed 6–29–15; 8:45 am]
Nine Metal Fabrication and Finishing additional information about EPA’s BILLING CODE 6560–50–P

VerDate Sep<11>2014 17:34 Jun 29, 2015 Jkt 235001 PO 00000 Frm 00029 Fmt 4703 Sfmt 9990 E:\FR\FM\30JNN1.SGM 30JNN1

Document Created: 2018-02-22 11:17:13
Document Modified: 2018-02-22 11:17:13

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Notices
Action		Notice.
Dates		Additional comments may be submitted on or before July 30, 2015.
Contact		Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564-2970; fax
FR Citation		80 FR 37247