80 FR 55613 - Certain New Chemicals; Receipt and Status Information for July 2015
ENVIRONMENTAL PROTECTION AGENCY Federal Register Volume 80, Issue 179 (September 16, 2015)
Federal Register Volume 80, Issue 179 (September 16, 2015)
| Page Range | 55613-55618 | |
| FR Document | 2015-23297 |
[Federal Register Volume 80, Number 179 (Wednesday, September 16, 2015)] [Notices] [Pages 55613-55618] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2015-23297] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2015-0502; FRL-9933-34] Certain New Chemicals; Receipt and Status Information for July 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from July 1, 2015 to July 30, 2015. DATES: Comments identified by the specific PMN number or TME number, must be received on or before October 16, 2015. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2015-0502, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from July 1, 2015 to July 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports For the PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting [[Page 55614]] manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. As used in the table, (S) is used to indicate that the information provided in the table is the specific information provided by the submitter, and (G) is used to indicate that the information provided in the table is generic information because the specific information provided by the submitter was claimed as CBI. Table 1--Status of the 85 PMNs Received From July 1 to July 30, 2015 ---------------------------------------------------------------------------------------------------------------- Projected Case No. Received notice end Manufacturer importer Chemical use Chemical identity date date ---------------------------------------------------------------------------------------------------------------- P-15-0564........... 7/1/2015 9/29/2015 CBI................... (G) Polymer (G) Graft copolymer intermediate of polyolefin and used in polyamide. extrusion and moulding. P-15-0565........... 7/1/2015 9/29/2015 CBI................... (G) Chemical (G) Polymeric intermediate. products of reactions of epoxy with organic acid and acrylic monomers, partially neutralized with dimethyl ethanolamine. P-15-0566........... 7/1/2015 9/29/2015 Allnex USA, Inc....... (S) Thickener for (G) Alkanedioic acid, waterborne polymer with industrial substituted coatings. carbomonocycles, alkyl substituted alkanediol, substituted alkanoic acid, and substituted alkanediamine, substituted alkanamine-blocked, compds. with alkylamine. P-15-0567........... 7/1/2015 9/29/2015 CBI................... (G) UV cured (G) Urethane coatings and acrylate. inks. P-15-0568........... 7/1/2015 9/29/2015 DIC International (G) Adhesives.... (G) Alicyclic (USA) LLC. polycarboxylic acid, polymer with alkyl methacrylate, alkyldiol, alkyldioic acid, polyalkyleneoxide, alkoxy methacrylate, aromatic heterocyclic diketone, aromatic diisocyanate, heterocyclic ketone and dialkyleneglycol. P-15-0569........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene dispersion glycol-,alkyl, amine- additive for functionalized paint and polyurethane. coating industry. P-15-0569........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene Dispersion glycol-,alkyl, amine- additive for functionalized pigment polyurethane. manufacturers. P-15-0570........... 7/1/2015 9/29/2015 OMG Americas, Inc..... (S) Wetting and (G) Polyethylene Dispersion glycol-, fatty acid- additive for , alkyl amine- pigment functionalised manufacturers. polyurethane. P-15-0571........... 7/2/2015 9/30/2015 CBI................... (S) Raw material (G) Potassium salt of used in the organic acid. manufacture of lubricants. P-15-0572........... 7/2/2015 9/30/2015 CBI................... (S) Raw material (G) Mixed salts of used in the organic acid. manufacture of lubricants. P-15-0573........... 7/6/2015 10/4/2015 XF Technologies....... (S) Chemical (S) 2- intermediate for furancarboxyaldehyde xF production. , 5-(chloromethyl)- P-15-0574........... 7/7/2015 10/5/2015 CBI................... (G) Separation (G) 1,3- membrane. Isobenzofurandione, 5,5'-[2,2,2- trifluoro-1- (trifluoromethyl) ethylidene]bis-, polymer with aromatic amines. P-15-0575........... 7/7/2015 10/5/2015 CBI................... (G) Monomer for a (G) Substituted [1,1'- polymer. biphenyl]. P-15-0576........... 7/7/2015 10/5/2015 CBI................... (S) Additive/ (S) Modified acrylic deflocculant for polymer. water-based decorative and industrial paints. P-15-0580........... 7/7/2015 10/5/2015 CBI................... (G) Coating...... (G) Cycloaliphatic epoxy. P-15-0581........... 7/7/2015 10/5/2015 CBI................... (G) Oilfield (G) L-amino acid, chemical homopolymer, additive. carboxylate. P-15-0582........... 7/8/2015 10/6/2015 CBI................... (G) Intermediate. (G) Doped Zirconium Oxide. P-15-0583........... 7/8/2015 10/6/2015 CBI................... (G) Lubricant (G) Butanedioic acid, additive. alkyl amine, dimethylbutyl ester. P-15-0584........... 7/8/2015 10/6/2015 The Lewis Chemical (S) Foaming agent (S) Amides, coco, n,n- Company. in industrial or bis(2- hard surface hydroxypropyl). cleaners. P-15-0585........... 7/9/2015 10/7/2015 CBI................... (S) Additive/ (S) Modified acrylic deflocculant for polymer. water-based decorative and industrial paints. P-15-0586........... 7/9/2015 10/7/2015 Bostik, Inc........... (G) Adhesive..... (G) Polyurethane. P-15-0587........... 7/9/2015 10/7/2015 Bostik, Inc........... (G) Adhesive..... (G) Polyurethane polyol. P-15-0588........... 7/10/2015 10/8/2015 CBI................... (G) Component of (G) Alkenoic acid, inkjet ink. polymer with substituted heteromonocycle, substituted carbomonocycle, 2- alkyl-2-hydroxyalkyl- 1,3-alkanediol 1- alkylalkenyl carbomonocycle, alkali metal salt. [[Page 55615]] P-15-0589........... 7/10/2015 10/8/2015 CBI................... (G) Component of (S) 2-Propenoic acid, inkjet ink. polymer with 2- (chloromethyl)oxiran e, ethenylbenzene, 2- ethyl-2- (hydroxymethyl)-1,3- propanediol and (1- methylethenyl)benzen e, potassium sodium salt. P-15-0590........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, 2-oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with dihydroxyalkyl sulfide, carboxylic acid salt. P-15-0591........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, 2-oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with hydroxyalkyl amine, carboxylic acid salt. P-15-0592........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, ethenylbenzene, 2- oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with dihydroxyalkyl sulfide, carboxylic acid salt. P-15-0593........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, ethenylbenzene, 2- oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with hydroxyalkyl amine, carboxylic acid salt. P-15-0594........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, 2-oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with dihydroxyalkyl sulfide, carboxylic acid salt. P-15-0595........... 7/10/2015 10/8/2015 CBI................... (G) Component in (G) 2-Propenoic acid, an 2-methyl-, methyl electrodepositio ester, polymer with n coating. butyl 2-propenoate, 2-oxiranylmethyl 2- methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2- propenoate), tert-Bu ethaneperoxoate- initiated, reaction products with hydroxyalkyl amine, carboxylic acid salt. P-15-0596........... 7/10/2015 10/8/2015 CBI................... (G) Intermediate. (G) Methyl alkaryl methyl hydrogen cyclosiloxanes. P-15-0597........... 7/10/2015 10/8/2015 CBI................... (S) Dispersing (G) Polyethylene agent for use in glycol alkyl ether, paints, sodium salt. pigments, and coatings. P-15-0598........... 7/13/2015 10/11/2015 Allnex USA, Inc....... (S) Automotive (G) Substituted basecoat.. alkanoic acid, polymer with substituted polypropylene, substituted carbomonocyle, dialkyl carbonate, alkanediol and substituted carbopolycycle, compd. with dialkylamino alkanol. P-15-0599........... 7/13/2015 10/11/2015 CBI................... (G) Adhesive..... (G) Hetero substituted alkyl acrylate polymer. P-15-0600........... 7/14/2015 10/12/2015 CBI................... (G) Plastics (G) additive. Poly(hydroxyalkanoat e). P-15-0601........... 7/14/2015 10/12/2015 CBI................... (G) Fluid loss (G) Acrylic-humic control additive. acid-based polymer. P-15-0602........... 7/14/2015 10/12/2015 CBI................... (G) Conductive (G) Copolymer of material. tetrafluoroethene and Perfluorosulfonylvin ylether. P-15-0603........... 7/14/2015 10/12/2015 CBI................... (G) Conductive (G) Copolymer of material. tetrafluoroethene and Perfluorosulfonylvin ylether. P-15-0605........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Chemical (S) Alkenes, C18-22, LLC. intermediate for mixed with pour point polyethylene, depressant oxidized, production. hydrolyzed, distn. residues, from C16- 18 alcs. manuf. P-15-0605........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Formulation (S) Alkenes, C18-22, LLC. of defoamers mixed with used in the polyethylene, production of oxidized, paper. hydrolyzed, distn. residues, from C16- 18 alcs. manuf. P-15-0606........... 7/14/2015 10/12/2015 Sasol Chemicals (USA) (S) Chemical (S) Alkenes, C18-22, LLC. intermediate for mixed with pour point polyethylene, depressant oxidized, production. hydrolyzed, distn. residues, from C20- 22 alcs. manuf. P-15-0607........... 7/14/2015 10/12/2015 CBI................... (G) Initiator for (G) 1,2,4,5,7,8- polymerization. Hexoxonane, 3,6,9- trimethyl-,3,6,9- tris(alkyl) derivs. [[Page 55616]] P-15-0608........... 7/15/2015 10/13/2015 CBI................... (G) Tackifying (G) Modified rosin component of hot polyol ester. melt adhesive and traffic marking formulations. P-15-0610........... 7/15/2015 10/13/2015 H.B. Fuller Company... (G) Industrial (G) Aliphatic Adhesive. isocyanate with polyalkylene carbonate diol and 2- hea. P-15-0611........... 7/15/2015 10/13/2015 H.B. Fuller Company... (G) Industrial (G) Aliphatic Adhesive. isocyanate with polyalkylene carbonate diol and 4- hba. P-15-0612........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Sulfur thulium Technologies. brand protection ytterbium yttrium and anti- oxide. counterfeiting inks and polymers. P-15-0613........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Gadolinium sulfur Technologies. brand protection ytterbium yttrium and anti- oxide, erbium- and counterfeiting thulium-doped. inks and polymers. P-15-0614........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Neodymium sulfur Technologies. brand protection yttrium oxide. and anti- counterfeiting inks and polymers. P-15-0615........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium Technologies. brand protection neodymium sulfur and anti- ytterbium yttrium counterfeiting oxide. inks and polymers. P-15-0616........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium Technologies. brand protection sulfur ytterbium and anti- yttrium oxide. counterfeiting inks and polymers. P-15-0617........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium Technologies. brand protection ytterbium oxide. and anti- counterfeiting inks and polymers. P-15-0618........... 7/15/2015 10/13/2015 BrandWatch (S) Additive for (S) Erbium gadolinium Technologies. brand protection sulfur ytterbium and anti- oxide. counterfeiting inks and polymers. P-15-0619........... 7/16/2015 10/14/2015 CBI................... (S) Tackifier in (G) Modified rosin traffic striping polyol esters. preform formulations. P-15-0620........... 7/17/2015 10/15/2015 CBI................... (G) Catalyst..... (G) Doped zirconium oxide. P-15-0621........... 7/17/2015 10/15/2015 CBI................... (G) Additive for (G) Aromatic plastics. polyester. P-15-0623........... 7/17/2015 10/15/2015 CBI................... (G) Epoxy (G) Nutshell liquid, hardener. polymer with alkylenediamine and formaldehyde, reaction products with phenol, 4,4'-(1- methylethylidene)bis- , polymer with 2- (chloromethyl)oxiran e and fatty acids, polymers with polyalkylenepolyamin e. P-15-0624........... 7/17/2015 10/15/2015 CBI................... (S) Wetting and (S) Modified urethane dispersing polymer. additive in industrial and architectural coatings. P-15-0625........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally material. occurring minerals, reaction products with hetero substituted alkyl acrylate polymer. P-15-0625........... 7/21/2015 10/19/2015 CBI................... (S) Construction (G) Naturally fill. occurring minerals, reaction products with hetero substituted alkyl acrylate polymer. P-15-0626........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally material. occurring minerals, reaction products with hetero substituted alkyl acrylate polymer. P-15-0627........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally material. occurring minerals, reaction products with hetero substituted alkyl acrylate polymer. P-15-0628........... 7/21/2015 10/19/2015 CBI................... (G) Construction (G) Naturally material. occurring minerals, reaction products with hetero substituted alkyl acrylate polymer. P-15-0630........... 7/22/2015 10/20/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic agent. acid, compound with alkyamino cyclohexane. P-15-0632........... 7/22/2015 10/20/2015 CBI................... (S) Salt for (G) Mixed amine salt. polymer. P-15-0633........... 7/23/2015 10/21/2015 Firmenich, Inc........ (G) As part of a (S) 1(2H)- fragrance Naphthalenone,4- formula ethyloctahydro-8- (dispersive use). methyl. P-15-0634........... 7/23/2015 10/21/2015 Firmenich, Inc........ (G) As part of a (S) Reaction mass of fragrance (3E)-4-(2,6,6- formula. trimethylcyclohex-1 or 2-en-1-yl)but-3- en-2-one and 4- (dodecylsulfanyl)-4- (2,6,6- trimethylcyclohex-1 or 2 -en-1-yl)butan- 2-one. [[Page 55617]] P-15-0635........... 7/23/2015 10/21/2015 CBI................... (G) In (G) Polymer of an electronics, aromatic olefin and adhesives, and one or more coatings substituted aromatic manufacture, or olefins. derivitized for these applications. P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in ((S) household Cyclopropanemethanol products. , a,1-dimethyl-2-(1- phenylethyl)-. P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in (S) a fine fragrance. Cyclopropanemethanol , a,1-dimethyl-2-(1- phenylethyl)-. P-15-0637........... 7/24/2015 10/22/2015 Takasago.............. (S) Fragrance in (S) consumer Cyclopropanemethanol products. , a,1-dimethyl-2-(1- phenylethyl)-. P-15-0638........... 7/24/2015 10/22/2015 Cardolite Corporation. (G) 100% Solids (G) Cashew nutshell Epoxy hardener liquid polymer with for water borne epichlorhydrin, epoxy coating formaldehyde, formulations. phenol, amines and glycol. P-15-0645........... 7/27/2015 10/25/2015 CBI................... (G) UV cured (G) Urethane coatings and acrylate. inks. P-15-0646........... 7/27/2015 10/25/2015 Gelest................ (S) Research..... (S) Silane, (3- chloropropyl)diethox ymethyl-. P-15-0646........... 7/27/2015 10/25/2015 Gelest................ (S) Conversion to (S) Silane, (3- an chloropropyl)diethox aminofunctional ymethyl-. organosilane at Gelest for export--subject of GLS226. P-15-0647........... 7/27/2015 10/25/2015 Gelest................ (S) Research..... (S) Propanamine, 3- (diethoxymethylsilyl )-N-[3- (diethoxymethylsilyl )propyl]-N-methyl-. P-15-0647........... 7/27/2015 10/25/2015 Gelest................ (S) Specialty (S) Propanamine, 3- adhesion (diethoxymethylsilyl promoter--to be )-N-[3- carried out in (diethoxymethylsilyl an Asian country. )propyl]-N-methyl-. P-15-0648........... 7/27/2015 10/25/2015 CBI................... (G) Raw material. (G) Alkylamino alcohol. P-15-0649........... 7/28/2015 10/26/2015 CBI................... (G) Additive, (G) Polyether open, non- modified epoxy dispersive use. resin. P-15-0651........... 7/28/2015 10/26/2015 CBI................... (G) Additive, (G) Siloxanes and open, non- silicones, di dispersive use. methyl, polyether modified. P-15-0652........... 7/28/2015 10/26/2015 CBI................... (G) Polymer for (G) Amine salted coatings. polyurethane. P-15-0653........... 7/28/2015 10/26/2015 CBI................... (G) Coating...... (G) Cycloaliphatic epoxide. P-15-0654........... 7/29/2015 10/27/2015 CBI................... (G) Coating...... (G) Cycloaliphatic epoxide. P-15-0655........... 7/29/2015 10/27/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic agent. acid, compound with alkyamino cyclohexane. P-15-0655........... 7/29/2015 10/27/2015 CBI................... (S) Epoxy curing (G) 2-Ethylhexanoic agent. acid, compound with cyclohexylamine. P-15-0657........... 7/30/2015 10/28/2015 CBI................... (G) Intermediate. (G) Allyl triazine oligomer. ---------------------------------------------------------------------------------------------------------------- For the NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the commencement date provided by the submitter in the NOC; and the chemical identity. As used in the table, (S) is used to indicate that the information provided in the table is the specific information provided by the submitter, and (G) is used to indicate that the information provided in the table is generic information because the specific information provided by the submitter was claimed as CBI. Table 2--Status of the 23 NOCs Received From July 1, 2015 to July 10, 2015 ---------------------------------------------------------------------------------------------------------------- Commencement Case No. Received date date Chemical identity ---------------------------------------------------------------------------------------------------------------- P-07-0621............................ 7/10/2015 6/28/2015 (G) Butanedioic acid, 2,3-dihydroxy-, mixed diesters, (2r, 3r)-rel-. P-09-0516............................ 7/30/2015 7/23/2015 (G) Fatty acids, c16-18 and c18- unsatd., polymer with alkyldioic acid, cycloalkylamine, aromatic diol, c18- unsatd. fatty acid dimers, epichlorohydrin, aromatic acid and triethylenetetramine. P-12-0414............................ 7/15/2015 7/9/2015 (S) 2-Propenoic acid, (2-ethyl-2-methyl- 1,3-dioxolan-4-yl)methyl ester. P-13-0252............................ 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5- ol, octahydro-2,4,5-trimethyl-. P-13-0252............................ 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5- ol, octahydro-3,4,5-trimethyl-. P-13-0752............................ 7/2/2015 7/1/2015 (G) Substituted polyethylene glycol monomethy ether. P-14-0669............................ 7/6/2015 7/1/2015 (G) Polyamine carboxyalkyl derivatives, sodium salts. P-14-0804............................ 7/10/2015 7/9/2015 (S) Phosphoric acid, sodium titanium (4+) salt (3:1:2). P-15-0189............................ 7/16/2015 6/29/2015 (G) Alkane carboxylic acid ester with alkanepolyol. [[Page 55618]] P-15-0192............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane and mixed metal oxides. P-15-0193............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxysilane and mixed metal oxides. P-15-0201............................ 7/7/2015 6/21/2015 (G) Methacrylate alkyl trialkoxysilane, reaction products with mixed metal oxides. P-15-0204............................ 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl trialkoxy silane and mixed metal oxides. P-15-0253............................ 7/7/2015 6/9/2015 (G) Organometallic, reaction product with titanium salt, zirconium metallocene and silica. P-15-0263............................ 7/14/2015 6/22/2015 (G) Ethylene vinyl acetate polymer. P-15-0273............................ 7/13/2015 7/8/2015 (S) Glycolipids, sophorose-contg., candida bombicola-fermented, from d- glucose and mahua madhuca longifolia fats and glyceridic oils. P-15-0281............................ 7/13/2015 7/10/2015 (G) Alkyl substituted alkanoic acid, polymer with substituted carbomonocycle, alkyl substituted alkenoate, alkanediol mono-alkyl substituted alkenoate and alkenoic acid, substituted alkyl ester, alkylperoxoate-initiated, compds. with alkylamino alkanol. P-15-0328............................ 7/17/2015 6/18/2015 (G) Aluminum calcium oxide salt. P-15-0330............................ 7/30/2015 7/18/2015 (G) Diphenylcyclic siloxane. P-15-0332............................ 7/10/2015 7/7/2015 (G) Linear siloxane. P-15-0337............................ 7/27/2015 7/15/2015 (G) Amino silane. P-15-0338............................ 7/22/2015 7/14/2015 (S) Decanedioic acid, 1,10- diisotridecyl ester. P-15-0370............................ 7/7/2015 7/4/2015 (G) Alcohols, polymers with dicarboxylic acid, alcohols, alkenedioic acid, dicarboxylic acids, alkanoic acid esters. ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: September 9, 2015. Chi Tran, Acting, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-23297 Filed 9-15-15; 8:45 am] BILLING CODE 6560-50-P
![Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices 55613
• Email: Rosborough.Evelyn@epa.gov. instructions for submitting comments. accordance with procedures set forth in
• Mail: Ms. Evelyn Rosborough, U.S. Do not submit electronically any 40 CFR part 2.
Environmental Protection Agency, information you consider to be 2. Tips for preparing your comments.
Region 6, 1445 Ross Avenue, Dallas, Confidential Business Information (CBI) When preparing and submitting your
Texas 75202–2733. or other information whose disclosure is comments, see the commenting tips at
Administrative Record: The proposed restricted by statute. http://www.epa.gov/dockets/
general permit and other related • Mail: Document Control Office comments.html.
documents in the administrative record (7407M), Office of Pollution Prevention
are on file and may be inspected any II. What action is the Agency taking?
and Toxics (OPPT), Environmental
time between 8:00 a.m. and 4:30 p.m., Protection Agency, 1200 Pennsylvania This document provides receipt and
Monday through Friday, excluding legal Ave. NW., Washington, DC 20460–0001. status reports, which cover the period
holidays, at the addresses listed for • Hand Delivery: To make special from July 1, 2015 to July 30, 2015, and
submission of comments. It is arrangements for hand delivery or consists of the PMNs and TMEs both
recommended that you write or call to delivery of boxed information, please pending and/or expired, and the NOCs
the contact above for an appointment, so follow the instructions at http:// to manufacture a new chemical that the
the record(s) will be available at your www.epa.gov/dockets/contacts.html. Agency has received under TSCA
convenience. Additional instructions on section 5 during this time period.
FOR FURTHER INFORMATION CONTACT: Ms. commenting or visiting the docket, III. What is the Agency’s authority for
Evelyn Rosborough, U.S. Environmental along with more information about taking this action?
Protection Agency, Region 6, 1445 Ross dockets generally, is available at Under TSCA, 15 U.S.C. 2601 et seq.,
Avenue, Dallas, Texas 75202–2733. http://www.epa.gov/dockets. EPA classifies a chemical substance as
Telephone: (214) 655–7515. Email FOR FURTHER INFORMATION CONTACT: For either an ‘‘existing’’ chemical or a
address: Rosborough.Evelyn@epa.gov. technical information contact: Jim ‘‘new’’ chemical. Any chemical
Dated: September 2, 2015. Rahai, IMD (7407M), Office of Pollution substance that is not on EPA’s TSCA
William K. Honker, Prevention and Toxics, Environmental Inventory is classified as a ‘‘new
Director, Water Quality Protection Division, Protection Agency, 1200 Pennsylvania chemical,’’ while those that are on the
EPA Region 6. Ave. NW., Washington, DC 20460–0001; TSCA Inventory are classified as an
[FR Doc. 2015–23175 Filed 9–15–15; 8:45 am] telephone number: (202) 564–8593; ‘‘existing chemical.’’ For more
BILLING CODE 6560–50–P
email address: rahai.jim@epa.gov. information about the TSCA Inventory
For general information contact: The go to: http://www.epa.gov/opptintr/
TSCA–Hotline, ABVI–Goodwill, 422 newchems/pubs/inventory.htm.
ENVIRONMENTAL PROTECTION South Clinton Ave., Rochester, NY Anyone who plans to manufacture or
AGENCY 14620; telephone number: (202) 554– import a new chemical substance for a
1404; email address: TSCA-Hotline@ non-exempt commercial purpose is
[EPA–HQ–OPPT–2015–0502; FRL–9933–34]
epa.gov. required by TSCA section 5 to provide
Certain New Chemicals; Receipt and SUPPLEMENTARY INFORMATION:
EPA with a PMN, before initiating the
Status Information for July 2015 activity. Section 5(h)(1) of TSCA
I. General Information authorizes EPA to allow persons, upon
AGENCY: Environmental Protection application, to manufacture (includes
Agency (EPA). A. Does this action apply to me?
import) or process a new chemical
ACTION: Notice. This action is directed to the public substance, or a chemical substance
in general. As such, the Agency has not subject to a significant new use rule
SUMMARY: EPA is required under the attempted to describe the specific (SNUR) issued under TSCA section 5(a),
Toxic Substances Control Act (TSCA) to entities that this action may apply to. for ‘‘test marketing’’ purposes, which is
publish in the Federal Register a notice Although others may be affected, this referred to as a test marketing
of receipt of a premanufacture notice action applies directly to the submitter exemption, or TME. For more
(PMN); an application for a test of the PMNs addressed in this action. information about the requirements
marketing exemption (TME), both applicable to a new chemical go to:
pending and/or expired; and a periodic B. What should I consider as I prepare
my comments for EPA? http://www.epa.gov/oppt/newchems.
status report on any new chemicals Under TSCA sections 5(d)(2) and
under EPA review and the receipt of 1. Submitting CBI. Do not submit this 5(d)(3), EPA is required to publish in
notices of commencement (NOC) to information to EPA through the Federal Register a notice of receipt
manufacture those chemicals. This regulations.gov or email. Clearly mark of a PMN or an application for a TME
document covers the period from July 1, the part or all of the information that and to publish in the Federal Register
2015 to July 30, 2015. you claim to be CBI. For CBI periodic status reports on the new
DATES: Comments identified by the information in a disk or CD–ROM that chemicals under review and the receipt
specific PMN number or TME number, you mail to EPA, mark the outside of the of NOCs to manufacture those
must be received on or before October disk or CD–ROM as CBI and then chemicals.
16, 2015. identify electronically within the disk or
ADDRESSES: Submit your comments, CD–ROM the specific information that IV. Receipt and Status Reports
asabaliauskas on DSK7TPTVN1PROD with NOTICES
identified by docket identification (ID) is claimed as CBI. In addition to one For the PMNs received by EPA during
number EPA–HQ–OPPT–2015–0502, complete version of the comment that this period, Table 1 provides the
and the specific PMN number or TME includes information claimed as CBI, a following information (to the extent that
number for the chemical related to your copy of the comment that does not such information is not claimed as CBI):
comment, by one of the following contain the information claimed as CBI The EPA case number assigned to the
methods: must be submitted for inclusion in the PMN; the date the PMN was received by
• Federal eRulemaking Portal: http:// public docket. Information so marked EPA; the projected end date for EPA’s
www.regulations.gov. Follow the online will not be disclosed except in review of the PMN; the submitting
VerDate Sep<11>2014 18:18 Sep 15, 2015 Jkt 235001 PO 00000 Frm 00026 Fmt 4703 Sfmt 4703 E:\FR\FM\16SEN1.SGM 16SEN1](https://thefederalregister.org/doc/80_FR_55792/page/1.svg)
![55614 Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
manufacturer/importer; the potential to indicate that the information information provided in the table is
uses identified by the manufacturer/ provided in the table is the specific generic information because the specific
importer in the PMN; and the chemical information provided by the submitter, information provided by the submitter
identity. As used in the table, (S) is used and (G) is used to indicate that the was claimed as CBI.
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015
Projected
Received Manufacturer
Case No. notice end Chemical use Chemical identity
date importer
date
P–15–0564 ..... 7/1/2015 9/29/2015 CBI .................... (G) Polymer intermediate (G) Graft copolymer of polyolefin and polyamide.
used in extrusion and
moulding.
P–15–0565 ..... 7/1/2015 9/29/2015 CBI .................... (G) Chemical inter- (G) Polymeric products of reactions of epoxy with
mediate. organic acid and acrylic monomers, partially
neutralized with dimethyl ethanolamine.
P–15–0566 ..... 7/1/2015 9/29/2015 Allnex USA, Inc (S) Thickener for water- (G) Alkanedioic acid, polymer with substituted
borne industrial coat- carbomonocycles, alkyl substituted alkanediol,
ings. substituted alkanoic acid, and substituted
alkanediamine, substituted alkanamine-blocked,
compds. with alkylamine.
P–15–0567 ..... 7/1/2015 9/29/2015 CBI .................... (G) UV cured coatings (G) Urethane acrylate.
and inks.
P–15–0568 ..... 7/1/2015 9/29/2015 DIC International (G) Adhesives ................ (G) Alicyclic polycarboxylic acid, polymer with alkyl
(USA) LLC. methacrylate, alkyldiol, alkyldioic acid,
polyalkyleneoxide, alkoxy methacrylate, aro-
matic heterocyclic diketone, aromatic
diisocyanate, heterocyclic ketone and
dialkyleneglycol.
P–15–0569 ..... 7/1/2015 9/29/2015 OMG Americas, (S) Wetting and disper- (G) Polyethylene glycol-,alkyl, amine-functionalized
Inc. sion additive for paint polyurethane.
and coating industry.
P–15–0569 ..... 7/1/2015 9/29/2015 OMG Americas, (S) Wetting and Disper- (G) Polyethylene glycol-,alkyl, amine-functionalized
Inc. sion additive for pig- polyurethane.
ment manufacturers.
P–15–0570 ..... 7/1/2015 9/29/2015 OMG Americas, (S) Wetting and Disper- (G) Polyethylene glycol-, fatty acid-, alkyl amine-
Inc. sion additive for pig- functionalised polyurethane.
ment manufacturers.
P–15–0571 ..... 7/2/2015 9/30/2015 CBI .................... (S) Raw material used in (G) Potassium salt of organic acid.
the manufacture of lu-
bricants.
P–15–0572 ..... 7/2/2015 9/30/2015 CBI .................... (S) Raw material used in (G) Mixed salts of organic acid.
the manufacture of lu-
bricants.
P–15–0573 ..... 7/6/2015 10/4/2015 XF Technologies (S) Chemical inter- (S) 2-furancarboxyaldehyde, 5-(chloromethyl)-
mediate for xF produc-
tion.
P–15–0574 ..... 7/7/2015 10/5/2015 CBI .................... (G) Separation mem- (G) 1,3-Isobenzofurandione, 5,5′-[2,2,2-trifluoro-1-
brane. (trifluoromethyl) ethylidene]bis-, polymer with ar-
omatic amines.
P–15–0575 ..... 7/7/2015 10/5/2015 CBI .................... (G) Monomer for a poly- (G) Substituted [1,1′-biphenyl].
mer.
P–15–0576 ..... 7/7/2015 10/5/2015 CBI .................... (S) Additive/deflocculant (S) Modified acrylic polymer.
for water-based deco-
rative and industrial
paints.
P–15–0580 ..... 7/7/2015 10/5/2015 CBI .................... (G) Coating ..................... (G) Cycloaliphatic epoxy.
P–15–0581 ..... 7/7/2015 10/5/2015 CBI .................... (G) Oilfield chemical ad- (G) L-amino acid, homopolymer, carboxylate.
ditive.
P–15–0582 ..... 7/8/2015 10/6/2015 CBI .................... (G) Intermediate ............. (G) Doped Zirconium Oxide.
P–15–0583 ..... 7/8/2015 10/6/2015 CBI .................... (G) Lubricant additive ..... (G) Butanedioic acid, alkyl amine, dimethylbutyl
ester.
P–15–0584 ..... 7/8/2015 10/6/2015 The Lewis (S) Foaming agent in in- (S) Amides, coco, n,n-bis(2-hydroxypropyl).
Chemical dustrial or hard surface
Company. cleaners.
P–15–0585 ..... 7/9/2015 10/7/2015 CBI .................... (S) Additive/deflocculant (S) Modified acrylic polymer.
asabaliauskas on DSK7TPTVN1PROD with NOTICES
for water-based deco-
rative and industrial
paints.
P–15–0586 ..... 7/9/2015 10/7/2015 Bostik, Inc. ........ (G) Adhesive .................. (G) Polyurethane.
P–15–0587 ..... 7/9/2015 10/7/2015 Bostik, Inc. ........ (G) Adhesive .................. (G) Polyurethane polyol.
P–15–0588 ..... 7/10/2015 10/8/2015 CBI ................... (G) Component of inkjet (G) Alkenoic acid, polymer with substituted
ink. heteromonocycle, substituted carbomonocycle,
2-alkyl-2-hydroxyalkyl-1,3-alkanediol 1-
alkylalkenyl carbomonocycle, alkali metal salt.
VerDate Sep<11>2014 18:18 Sep 15, 2015 Jkt 235001 PO 00000 Frm 00027 Fmt 4703 Sfmt 4703 E:\FR\FM\16SEN1.SGM 16SEN1](https://thefederalregister.org/doc/80_FR_55792/page/2.svg)
![Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices 55617
TABLE 1—STATUS OF THE 85 PMNS RECEIVED FROM JULY 1 TO JULY 30, 2015—Continued
Projected
Received Manufacturer
Case No. notice end Chemical use Chemical identity
date importer
date
P–15–0635 ..... 7/23/2015 10/21/2015 CBI ................... (G) In electronics, adhe- (G) Polymer of an aromatic olefin and one or more
sives, and coatings substituted aromatic olefins.
manufacture, or
derivitized for these
applications.
P–15–0637 ..... 7/24/2015 10/22/2015 Takasago .......... (S) Fragrance in house- ((S) Cyclopropanemethanol, a,1-dimethyl-2-(1-
hold products. phenylethyl)-.
P–15–0637 ..... 7/24/2015 10/22/2015 Takasago .......... (S) Fragrance in a fine (S) Cyclopropanemethanol, a,1-dimethyl-2-(1-
fragrance. phenylethyl)-.
P–15–0637 ..... 7/24/2015 10/22/2015 Takasago .......... (S) Fragrance in con- (S) Cyclopropanemethanol, a,1-dimethyl-2-(1-
sumer products. phenylethyl)-.
P–15–0638 ..... 7/24/2015 10/22/2015 Cardolite Cor- (G) 100% Solids Epoxy (G) Cashew nutshell liquid polymer with
poration. hardener for water epichlorhydrin, formaldehyde, phenol, amines
borne epoxy coating and glycol.
formulations.
P–15–0645 ..... 7/27/2015 10/25/2015 CBI ................... (G) UV cured coatings (G) Urethane acrylate.
and inks.
P–15–0646 ..... 7/27/2015 10/25/2015 Gelest ............... (S) Research .................. (S) Silane, (3-chloropropyl)diethoxymethyl-.
P–15–0646 ..... 7/27/2015 10/25/2015 Gelest ............... (S) Conversion to an (S) Silane, (3-chloropropyl)diethoxymethyl-.
aminofunctional
organosilane at Gelest
for export—subject of
GLS226.
P–15–0647 ..... 7/27/2015 10/25/2015 Gelest ............... (S) Research .................. (S) Propanamine, 3-(diethoxymethylsilyl)-N-[3-
(diethoxymethylsilyl)propyl]-N-methyl-.
P–15–0647 ..... 7/27/2015 10/25/2015 Gelest ............... (S) Specialty adhesion (S) Propanamine, 3-(diethoxymethylsilyl)-N-[3-
promoter—to be car- (diethoxymethylsilyl)propyl]-N-methyl-.
ried out in an Asian
country.
P–15–0648 ..... 7/27/2015 10/25/2015 CBI ................... (G) Raw material ............ (G) Alkylamino alcohol.
P–15–0649 ..... 7/28/2015 10/26/2015 CBI ................... (G) Additive, open, non- (G) Polyether modified epoxy resin.
dispersive use.
P–15–0651 ..... 7/28/2015 10/26/2015 CBI ................... (G) Additive, open, non- (G) Siloxanes and silicones, di methyl, polyether
dispersive use. modified.
P–15–0652 ..... 7/28/2015 10/26/2015 CBI ................... (G) Polymer for coatings (G) Amine salted polyurethane.
P–15–0653 ..... 7/28/2015 10/26/2015 CBI ................... (G) Coating ..................... (G) Cycloaliphatic epoxide.
P–15–0654 ..... 7/29/2015 10/27/2015 CBI ................... (G) Coating ..................... (G) Cycloaliphatic epoxide.
P–15–0655 ..... 7/29/2015 10/27/2015 CBI ................... (S) Epoxy curing agent .. (G) 2-Ethylhexanoic acid, compound with
alkyamino cyclohexane.
P–15–0655 ..... 7/29/2015 10/27/2015 CBI ................... (S) Epoxy curing agent .. (G) 2-Ethylhexanoic acid, compound with cyclo-
hexylamine.
P–15–0657 ..... 7/30/2015 10/28/2015 CBI ................... (G) Intermediate ............. (G) Allyl triazine oligomer.
For the NOCs received by EPA during EPA; the commencement date provided submitter, and (G) is used to indicate
this period, Table 2 provides the by the submitter in the NOC; and the that the information provided in the
following information (to the extent that chemical identity. As used in the table, table is generic information because the
such information is not claimed as CBI): (S) is used to indicate that the specific information provided by the
The EPA case number assigned to the information provided in the table is the submitter was claimed as CBI.
NOC; the date the NOC was received by specific information provided by the
TABLE 2—STATUS OF THE 23 NOCS RECEIVED FROM JULY 1, 2015 TO JULY 10, 2015
Commence-
Case No. Received date Chemical identity
ment date
P–07–0621 ..... 7/10/2015 6/28/2015 (G) Butanedioic acid, 2,3-dihydroxy-, mixed diesters, (2r, 3r)-rel-.
P–09–0516 ..... 7/30/2015 7/23/2015 (G) Fatty acids, c16-18 and c18-unsatd., polymer with alkyldioic acid, cycloalkylamine, ar-
omatic diol, c18-unsatd. fatty acid dimers, epichlorohydrin, aromatic acid and
asabaliauskas on DSK7TPTVN1PROD with NOTICES
triethylenetetramine.
P–12–0414 ..... 7/15/2015 7/9/2015 (S) 2-Propenoic acid, (2-ethyl-2-methyl-1,3-dioxolan-4-yl)methyl ester.
P–13–0252 ..... 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5-ol, octahydro-2,4,5-trimethyl-.
P–13–0252 ..... 7/24/2015 7/9/2015 (S) Mixture of 4,7-methano-1h-inden-5-ol, octahydro-3,4,5-trimethyl-.
P–13–0752 ..... 7/2/2015 7/1/2015 (G) Substituted polyethylene glycol monomethy ether.
P–14–0669 ..... 7/6/2015 7/1/2015 (G) Polyamine carboxyalkyl derivatives, sodium salts.
P–14–0804 ..... 7/10/2015 7/9/2015 (S) Phosphoric acid, sodium titanium (4+) salt (3:1:2).
P–15–0189 ..... 7/16/2015 6/29/2015 (G) Alkane carboxylic acid ester with alkanepolyol.
VerDate Sep<11>2014 18:18 Sep 15, 2015 Jkt 235001 PO 00000 Frm 00030 Fmt 4703 Sfmt 4703 E:\FR\FM\16SEN1.SGM 16SEN1](https://thefederalregister.org/doc/80_FR_55792/page/5.svg)
![55618 Federal Register / Vol. 80, No. 179 / Wednesday, September 16, 2015 / Notices
TABLE 2—STATUS OF THE 23 NOCS RECEIVED FROM JULY 1, 2015 TO JULY 10, 2015—Continued
Commence-
Case No. Received date Chemical identity
ment date
P–15–0192 ..... 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxysilane and mixed metal oxides.
P–15–0193 ..... 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxysilane and mixed metal oxides.
P–15–0201 ..... 7/7/2015 6/21/2015 (G) Methacrylate alkyl trialkoxysilane, reaction products with mixed metal oxides.
P–15–0204 ..... 7/7/2015 6/21/2015 (G) Isocyanated alkyl trialkoxysilane, reaction products with epoxy modified cyclohexyl
trialkoxy silane and mixed metal oxides.
P–15–0253 ..... 7/7/2015 6/9/2015 (G) Organometallic, reaction product with titanium salt, zirconium metallocene and silica.
P–15–0263 ..... 7/14/2015 6/22/2015 (G) Ethylene vinyl acetate polymer.
P–15–0273 ..... 7/13/2015 7/8/2015 (S) Glycolipids, sophorose-contg., candida bombicola-fermented, from d-glucose and
mahua madhuca longifolia fats and glyceridic oils.
P–15–0281 ..... 7/13/2015 7/10/2015 (G) Alkyl substituted alkanoic acid, polymer with substituted carbomonocycle, alkyl sub-
stituted alkenoate, alkanediol mono-alkyl substituted alkenoate and alkenoic acid, sub-
stituted alkyl ester, alkylperoxoate-initiated, compds. with alkylamino alkanol.
P–15–0328 ..... 7/17/2015 6/18/2015 (G) Aluminum calcium oxide salt.
P–15–0330 ..... 7/30/2015 7/18/2015 (G) Diphenylcyclic siloxane.
P–15–0332 ..... 7/10/2015 7/7/2015 (G) Linear siloxane.
P–15–0337 ..... 7/27/2015 7/15/2015 (G) Amino silane.
P–15–0338 ..... 7/22/2015 7/14/2015 (S) Decanedioic acid, 1,10-diisotridecyl ester.
P–15–0370 ..... 7/7/2015 7/4/2015 (G) Alcohols, polymers with dicarboxylic acid, alcohols, alkenedioic acid, dicarboxylic
acids, alkanoic acid esters.
Authority: 15 U.S.C. 2601 et seq. collection of information unless it Docket Center is 202–566–1744. For
Dated: September 9, 2015. displays a currently valid OMB control additional information about EPA’s
Chi Tran, Acting, number. public docket, visit http://www.epa.gov/
Director, Information Management Division, DATES: Comments must be submitted on dockets.
Office of Pollution Prevention and Toxics. or before November 16, 2015. Pursuant to section 3506(c)(2)(A) of
[FR Doc. 2015–23297 Filed 9–15–15; 8:45 am] ADDRESSES: Submit your comments, the PRA, the EPA is soliciting comments
BILLING CODE 6560–50–P referencing by Docket ID No. EPA–HQ– and information to enable it to: (i)
RCRA–2015–0605, online using Evaluate whether the proposed
www.regulations.gov (our preferred collection of information is necessary
ENVIRONMENTAL PROTECTION method), by email to rcra-docket@ for the proper performance of the
AGENCY epa.gov, or by mail to: EPA Docket functions of the Agency, including
Center, Environmental Protection whether the information will have
[EPA–HQ–RCRA–2015–0605, FRL–9934–18–
OSWER] Agency, Mail Code 28221T, 1200 practical utility; (ii) evaluate the
Pennsylvania Ave. NW., Washington, accuracy of the Agency’s estimate of the
Agency Information Collection DC 20460. burden of the proposed collection of
Activities; Proposed Collection; EPA’s policy is that all comments information, including the validity of
Comment Request; Standardized received will be included in the public the methodology and assumptions used;
Permit for RCRA Hazardous Waste docket without change including any (iii) enhance the quality, utility, and
Management Facilities personal information provided, unless clarity of the information to be
the comment includes profanity, threats, collected; and (iv) minimize the burden
AGENCY: Environmental Protection information claimed to be Confidential of the collection of information on those
Agency (EPA). Business Information (CBI) or other who are to respond, including through
ACTION: Notice. information whose disclosure is the use of appropriate automated
SUMMARY: The Environmental Protection restricted by statute. electronic, mechanical, or other
Agency (EPA) is planning to submit an FOR FURTHER INFORMATION CONTACT: Jeff technological collection techniques or
information collection request (ICR), Gaines, Office of Resource Conservation other forms of information technology,
Standardized Permit for RCRA and Recovery, (5303P), Environmental e.g., permitting electronic submission of
Hazardous Waste Management Facilities Protection Agency, 1200 Pennsylvania responses. The EPA will consider the
(EPA ICR No. 1935.05, OMB Control No. Ave. NW., Washington, DC 20460; comments received and amend the ICR
2050–0182) to the Office of Management telephone number: 703–308–8655; fax as appropriate. The final ICR package
and Budget (OMB) for review and number: 703–308–8617; email address: will then be submitted to OMB for
approval in accordance with the gaines.jeff@epa.gov. review and approval. At that time, the
Paperwork Reduction Act (PRA) (44 SUPPLEMENTARY INFORMATION: EPA will issue another Federal Register
U.S.C. 3501 et seq.). Before doing so, the Supporting documents which explain notice to announce the submission of
asabaliauskas on DSK7TPTVN1PROD with NOTICES
EPA is soliciting public comments on in detail the information the EPA will the ICR to OMB and the opportunity to
specific aspects of the proposed be collecting are available in the public submit additional comments to OMB.
information collection as described docket for this ICR. The docket can be Abstract: Under the authority of
below. This is a proposed extension of viewed online at www.regulations.gov sections 3004, 3005, 3008 and 3010 of
the ICR, which is currently approved or in person at the EPA Docket Center, the Resource Conservation and
through January 31, 2016. An Agency WJC West, Room 3334, 1301 Recovery Act (RCRA), as amended, EPA
may not conduct or sponsor and a Constitution Ave. NW., Washington, revised the RCRA hazardous waste
person is not required to respond to a DC. The telephone number for the permitting program to allow a
VerDate Sep<11>2014 18:18 Sep 15, 2015 Jkt 235001 PO 00000 Frm 00031 Fmt 4703 Sfmt 4703 E:\FR\FM\16SEN1.SGM 16SEN1](https://thefederalregister.org/doc/80_FR_55792/page/6.svg)
Document Created: 2018-02-26 10:16:32
Document Modified: 2018-02-26 10:16:32
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific PMN number or TME number, must be received on or before October 16, 2015. | |
| Contact | For technical information contact: Jim Rahai, IMD (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
| FR Citation | 80 FR 55613 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR