80 FR 57232 - Curtis-Straus LLC: Application for Expansion of Recognition

DEPARTMENT OF LABOR
Occupational Safety and Health Administration

Federal Register Volume 80, Issue 183 (September 22, 2015)

Page Range57232-57234
FR Document2015-24065

In this notice, OSHA announces the application of Curtis- Straus LLC for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application.

Federal Register, Volume 80 Issue 183 (Tuesday, September 22, 2015)
[Federal Register Volume 80, Number 183 (Tuesday, September 22, 2015)]
[Notices]
[Pages 57232-57234]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2015-24065]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2009-0026]


Curtis-Straus LLC: Application for Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of Curtis-
Straus LLC for expansion of its recognition as a Nationally Recognized 
Testing Laboratory (NRTL) and presents the Agency's preliminary finding 
to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before October 7, 2015.

ADDRESSES: Submit comments by any of the following methods:
    1. Electronically: Submit comments and attachments electronically 
at http://www.regulations.gov, which is the Federal eRulemaking Portal. 
Follow the instructions online for making electronic submissions.
    2. Facsimile: If submissions, including attachments, are not longer 
than 10 pages, commenters may fax them to the OSHA Docket Office at 
(202) 693-1648.
    3. Regular or express mail, hand delivery, or messenger (courier) 
service:

[[Page 57233]]

Submit comments, requests, and any attachments to the OSHA Docket 
Office, Docket No. OSHA-2009-0026, Technical Data Center, U.S. 
Department of Labor, 200 Constitution Avenue NW., Room N-2625, 
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays 
in receiving comments and other written materials by regular mail. 
Contact the OSHA Docket Office for information about security 
procedures concerning delivery of materials by express mail, hand 
delivery, or messenger service. The hours of operation for the OSHA 
Docket Office are 8:15 a.m.--4:45 p.m., e.t.
    4. Instructions: All submissions must include the Agency name and 
the OSHA docket number (OSHA-2009-0026). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials will be available online at 
http://www.regulations.gov. Therefore, the Agency cautions commenters 
about submitting statements they do not want made available to the 
public, or submitting comments that contain personal information 
(either about themselves or others) such as Social Security numbers, 
birth dates, and medical data.
    5. Docket: To read or download submissions or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection at the OSHA Docket Office. Contact the 
OSHA Docket Office for assistance in locating docket submissions.
    6. Extension of comment period: Submit requests for an extension of 
the comment period on or before October 7, 2015 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution 
Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, 200 Constitution Avenue 
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; 
email: [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, 200 
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone: 
(202) 693-2110 or email: [email protected].

SUPPLEMENTARY INFORMATION:

I. Notice of the Application for Expansion

    The Occupational Safety and Health Administration is providing 
notice that Curtis-Straus LLC (CSL) is applying for expansion of its 
current recognition as an NRTL. CSL requests the addition of five test 
standards to its NRTL scope of recognition.
    OSHA recognition of an NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within its 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by its 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The Agency processes applications by an NRTL for initial 
recognition and for an expansion or renewal of this recognition, 
following requirements in Appendix A to 29 CFR 1910.7. This appendix 
requires that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding. In the second notice, 
the Agency provides its final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational Web page for each NRTL, 
including CSL, which details the NRTL's scope of recognition. These 
pages are available from the OSHA Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
    CSL currently has one facility (site) recognized by OSHA for 
product testing and certification, with its headquarters located at: 
Curtis-Straus LLC, One Distribution Center Circle, Suite #1, Littleton, 
Massachusetts 01460. A complete list of CSL's scope of recognition is 
available at http://www.osha.gov/dts/otpca/nrtl/csl.html.

II. General Background on the Application

    CSL submitted an application, dated November 3, 2014, (CSL Exhibit 
3--Expansion Application for Five Standards), to expand its recognition 
to include five additional test standards. OSHA staff performed a 
comparability analysis and reviewed other pertinent information. OSHA 
performed an on-site review in relation to this application on January 
27, 2015 to January 28, 2015.
    Table 1 below lists the appropriate test standards found in CSL's 
application for expansion for testing and certification of products 
under the NRTL Program.

 Table 1--Proposed Appropriate Test Standard for Inclusion in CSL's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
          Test standard                     Test standard title
------------------------------------------------------------------------
UL 507...........................  Standard for Electric Fans.
UL 1026..........................  Standard for Electric Household
                                    Cooking and Food-Serving Appliances.
UL 1082..........................  Standard for Household Electric
                                    Coffee Makers and Brewing-Type
                                    Appliances.
UL 60335-1.......................  Safety of Household and Similar
                                    Electrical Appliances, Part 1:
                                    General Requirements.
UL 60335-2-8.....................  Standard for Safety for Household and
                                    Similar Electrical Appliances, Part
                                    2: Particular Requirements for
                                    Electric Shavers, Hair Clippers and
                                    Similar Appliances.
------------------------------------------------------------------------


[[Page 57234]]

III. Preliminary Findings on the Application

    CSL submitted an acceptable application for expansion of its scope 
of recognition. OSHA's review of the application file and on-site 
review indicate that CSL can meet the requirements prescribed by 29 CFR 
1910.7 for expanding its recognition to include the addition of the 
test standards for NRTL testing and certification listed above. This 
preliminary finding does not constitute an interim or temporary 
approval of CSL's application.
    OSHA welcomes public comment as to whether CSL meets the 
requirements of 29 CFR 1910.7 for expansion of its recognition as an 
NRTL. Comments should consist of pertinent written documents and 
exhibits. Commenters needing more time to comment must submit a request 
in writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if the request 
is not adequately justified. To obtain or review copies of the exhibits 
identified in this notice, as well as comments submitted to the docket, 
contact the Docket Office, Room N-2625, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials also are available online at http://www.regulations.gov under 
Docket No. OSHA-2009-0026.
    OSHA staff will review all comments to the docket submitted in a 
timely manner and, after addressing the issues raised by these 
comments, will recommend to the Assistant Secretary for Occupational 
Safety and Health whether to grant CSL's application for expansion of 
its scope of recognition. The Assistant Secretary will make the final 
decision on granting the application. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of its final decision in the 
Federal Register.

Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW., 
Washington, DC 20210, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on September 16, 2015.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2015-24065 Filed 9-21-15; 8:45 am]
BILLING CODE 4510-26-P


Current View
CategoryRegulatory Information
CollectionFederal Register
sudoc ClassAE 2.7:
GS 4.107:
AE 2.106:
PublisherOffice of the Federal Register, National Archives and Records Administration
SectionNotices
ActionNotice.
DatesSubmit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before October 7, 2015.
ContactInformation regarding this notice is available from the following sources:
FR Citation80 FR 57232 

2024 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR