80 FR 78651 - Definitions of Terms

DEPARTMENT OF COMMERCE
Bureau of Industry and Security

Federal Register Volume 80, Issue 242 (December 17, 2015)

Page Range		78651-78651
FR Document		2015-31737

Federal Register, Volume 80 Issue 242 (Thursday, December 17, 2015)

[Federal Register Volume 80, Number 242 (Thursday, December 17, 2015)]
[Rules and Regulations]
[Page 78651]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2015-31737]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security

15 CFR Part 772


Definitions of Terms

CFR Correction

    In Title 15 of the Code of Federal Regulations, Parts 300 to 799, 
revised as of January 1, 2015, on pages 723, 727, and 733, in Sec.  
772.1, remove the definitions of ``fault tolerance'', ``laser 
duration'' and ``positioning accuracy''.

[FR Doc. 2015-31737 Filed 12-16-15; 8:45 am]
 BILLING CODE 1505-01-D

Federal Register / Vol. 80, No. 242 / Thursday, December 17, 2015 / Rules and Regulations 78651

PAH for new parts that will be installed 658, in § 762.1, in paragraph (b), remove A. Background
in articles for which a dual ‘‘§ 762.7’’ and add ‘‘§ 762.2’’ in its place,
1. Third Party Testing and Burden
airworthiness release is to be issued. In and remove ‘‘§ 762.6’’ and add ‘‘§ 762.7’’
Reduction
order to serve European customers in its place.
many U.S. repair stations will be [FR Doc. 2015–31733 Filed 12–16–15; 8:45 am]
Section 14(a) of the Consumer
required to possess parts documentation Product Safety Act, (‘‘CPSA’’), as
BILLING CODE 1505–01–D
that U.S. PAHs cannot currently issue amended by the Consumer Product
and which can only be obtained from Safety Improvement Act of 2008
the FAA or its designees. (‘‘CPSIA’’), requires that manufacturers
DEPARTMENT OF COMMERCE
Although the FAA and EASA have of products subject to a consumer
agreed to delay the implementation of Bureau of Industry and Security product safety rule or similar rule, ban,
Change 5 to the MAG until March 29, standard or regulation enforced by the
2016, correcting the effective date of 15 CFR Part 772 CPSC, must certify that the product
§ 21.137(o) will provide PAHs with the complies with all applicable CPSC-
ability to establish a system for the Definitions of Terms enforced requirements. 15 U.S.C.
issuance of authorized release 2063(a). For children’s products,
documents to meet EASA requirements CFR Correction certification must be based on testing
without increasing staff in the form of conducted by a CPSC-accepted third
In Title 15 of the Code of Federal party conformity assessment body. Id.
Organization Designation Authority
Regulations, Parts 300 to 799, revised as Public Law 112–28 (August 12, 2011)
(ODA) unit members or Designated
of January 1, 2015, on pages 723, 727, directed the CPSC to seek comment on
Manufacturing Inspection
and 733, in § 772.1, remove the ‘‘opportunities to reduce the cost of
Representatives (DMIRs), or incurring
definitions of ‘‘fault tolerance’’, ‘‘laser third party testing requirements
the cost of hiring additional Designated
duration’’ and ‘‘positioning accuracy’’. consistent with assuring compliance
Airworthiness Representatives (DARs).
Additionally, correcting the effective [FR Doc. 2015–31737 Filed 12–16–15; 8:45 am] with any applicable consumer product
date of §§ 21.142, 21.147, and 45.11(c) BILLING CODE 1505–01–D safety rule, ban, standard, or
will alleviate the current need for PAHs regulation.’’ Public Law 112–28 also
to request new exemptions or renew authorized the Commission to issue new
current exemptions to manufacture and or revised third party testing regulations
install interface components and CONSUMER PRODUCT SAFETY if the Commission determines ‘‘that
appropriately mark wooden propellers. COMMISSION such regulations will reduce third party
The remaining sections of the final testing costs consistent with assuring
rule become effective on March 29, 16 CFR Part 1251 compliance with the applicable
2016, its originally published effective consumer product safety rules, bans,
date. [Docket No. CPSC–2011–0081] standards, and regulations.’’ Id.
2063(d)(3)(B).
Correction Toys: Determination Regarding Heavy 2. CPSC’s Toy Standard
In FR Doc. 2015–24950, beginning on Elements Limits for Unfinished and
page 59021 in the Federal Register of Untreated Wood Section 106 of the CPSIA states that
October 1, 2015, in the second column, the provisions of ASTM International
correct the DATES section to read as AGENCY:U.S. Consumer Product Safety (‘‘ASTM’’), Consumer Safety
follows: Commission. Specifications for Toy Safety (‘‘ASTM
DATES: This final rule is effective F963,’’ or ‘‘toy standard’’), ‘‘shall be
ACTION: Final rule. considered to be consumer product
March 29, 2016, except for §§ 21.1(b)(1),
21.1(b)(5) through (9), 21.137(o), 21.142, safety standards issued by the
SUMMARY: The Consumer Product Safety Commission under section 9 of the
21.147 and 45.11(c), which are effective
Commission (‘‘Commission,’’ or CPSA (15 U.S.C. 2058).’’ 1 Thus, toys
on January 4, 2016.
‘‘CPSC’’) is issuing a final rule subject to ASTM F963–11, the current
Issued under authority provided by 49 determining that unfinished and
U.S.C. 106(f), 44701(a), and 44703 in
mandatory version of the standard, must
untreated trunk wood does not contain be tested by a CPSC-accepted third party
Washington, DC, on December 11, 2015.
heavy elements that would exceed the conformity assessment body and
Lirio Liu, limits specified in the Commission’s toy demonstrate compliance with all
Director, Office of Rulemaking. standard, ASTM F963–11. Based on this applicable CPSC requirements for the
[FR Doc. 2015–31639 Filed 12–16–15; 8:45 am] determination, unfinished and manufacturer to issue a Children’s
BILLING CODE P untreated trunk wood in toys does not Product Certificate (‘‘CPC’’) before the
require third party testing for the heavy toys can be entered into commerce.
element limits in ASTM F963. The toy standard has numerous
DEPARTMENT OF COMMERCE DATES: The rule is effective on January requirements. Among them, section
19, 2016. 4.3.5 requires that surface coating
Bureau of Industry and Security materials and accessible substrates of
FOR FURTHER INFORMATION CONTACT: John toys 2 that can be sucked, mouthed, or
15 CFR Part 762 W. Boja, Lead Compliance Officer,
Lhorne on DSK5TPTVN1PROD with RULES

Office of Compliance, U.S. Consumer 1 ASTM F963–11 is a consumer product safety
Recordkeeping Product Safety Commission, 4330 East standard, except for section 4.2 and Annex 4, or any
provision that restates or incorporates an existing
CFR Correction West Hwy., Room 610M, Bethesda, MD mandatory standard or ban promulgated by the
20814; 301–504–7300: email: jboja@ Commission or by statute.
In Title 15 of the Code of Federal cpsc.gov. 2 ASTM F963–11 contains the following note
Regulations, Parts 300 to 799, revised as regarding the scope of the solubility requirement:
of January 1, 2015, on pages 657 and SUPPLEMENTARY INFORMATION: Continued

VerDate Sep<11>2014 15:06 Dec 16, 2015 Jkt 238001 PO 00000 Frm 00003 Fmt 4700 Sfmt 4700 E:\FR\FM\17DER1.SGM 17DER1

Document Created: 2018-03-02 09:18:56
Document Modified: 2018-03-02 09:18:56

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Rules and Regulations
FR Citation		80 FR 78651

80 FR 78651 - Definitions of Terms

DEPARTMENT OF COMMERCEBureau of Industry and Security

Federal Register Volume 80, Issue 242 (December 17, 2015)

DEPARTMENT OF COMMERCE
Bureau of Industry and Security