81 FR 13713 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration

Federal Register Volume 81, Issue 50 (March 15, 2016)

Page Range		13713-13714
FR Document		2016-05701

We are superseding airworthiness directive (AD) 2015-04-03 that applies to certain Rolls-Royce plc (RR) RB211 Trent 768-60, 772- 60, and 772B-60 turbofan engines. AD 2015-04-03 required inspection of the sealing sleeve on the high-pressure/intermediate-pressure (HP/IP) turbine support internal oil feed tube and removal of those sealing sleeves affected by AD 2015-04-03. This AD requires removal of either the affected sealing sleeve only or both the affected sealing sleeve and the oil feed tube. This AD was prompted by fractures of the HP/IP turbine support internal oil feed tube. We are issuing this AD to prevent failure of the HP/IP turbine support internal oil feed tube, uncontained engine failure, and damage to the airplane.

Federal Register, Volume 81 Issue 50 (Tuesday, March 15, 2016)

[Federal Register Volume 81, Number 50 (Tuesday, March 15, 2016)]
[Rules and Regulations]
[Pages 13713-13714]
From the Federal Register Online  [www.thefederalregister.org]
[FR Doc No: 2016-05701]



========================================================================
Rules and Regulations
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains regulatory documents 
having general applicability and legal effect, most of which are keyed 
to and codified in the Code of Federal Regulations, which is published 
under 50 titles pursuant to 44 U.S.C. 1510.

The Code of Federal Regulations is sold by the Superintendent of Documents. 
Prices of new books are listed in the first FEDERAL REGISTER issue of each 
week.

========================================================================


Federal Register / Vol. 81, No. 50 / Tuesday, March 15, 2016 / Rules 
and Regulations

[[Page 13713]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2014-0561; Directorate Identifier 2014-NE-12-AD; 
Amendment 39-18407; AD 2016-04-13]
RIN 2120-AA64


Airworthiness Directives; Rolls-Royce plc Turbofan Engines

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are superseding airworthiness directive (AD) 2015-04-03 
that applies to certain Rolls-Royce plc (RR) RB211 Trent 768-60, 772-
60, and 772B-60 turbofan engines. AD 2015-04-03 required inspection of 
the sealing sleeve on the high-pressure/intermediate-pressure (HP/IP) 
turbine support internal oil feed tube and removal of those sealing 
sleeves affected by AD 2015-04-03. This AD requires removal of either 
the affected sealing sleeve only or both the affected sealing sleeve 
and the oil feed tube. This AD was prompted by fractures of the HP/IP 
turbine support internal oil feed tube. We are issuing this AD to 
prevent failure of the HP/IP turbine support internal oil feed tube, 
uncontained engine failure, and damage to the airplane.

DATES: This AD is effective April 19, 2016.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of April 19, 
2016.

ADDRESSES: For service information identified in this AD, contact 
Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, DE24 
8BJ, United Kingdom; phone: 011-44-1332-242424; fax: 011-44-1332-
249936; email: http://www.rolls-royce.com/contact/civil_team.jsp; 
Internet: https://customers.rolls-royce.com/public/rollsroycecare. You 
may view this service information at the FAA, Engine & Propeller 
Directorate, 1200 District Avenue, Burlington, MA. For information on 
the availability of this material at the FAA, call 781-238-7125. It is 
also available on the Internet at http://www.regulations.gov by 
searching for and locating Docket No. FAA-2014-0561.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2014-
0561; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this AD, the mandatory continuing airworthiness information, 
regulatory evaluation, any comments received, and other information. 
The address for the Docket Office (phone: 800-647-5527) is Document 
Management Facility, U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Philip Haberlen, Aerospace Engineer, 
Engine Certification Office, FAA, Engine & Propeller Directorate, 1200 
District Avenue, Burlington, MA 01803; phone: 781-238-7770; fax: 781-
238-7199; email: [email protected].

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 to supersede AD 2015-04-03, Amendment 39-18105 (80 FR 9380, 
February 23, 2015), (``AD 2015-04-03''). AD 2015-04-03 applied to the 
specified products. The NPRM published in the Federal Register on 
November 10, 2015 (80 FR 69625). The NPRM proposed to require removal 
of either the affected sealing sleeve only or both the affected sealing 
sleeve and the oil feed tube.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We considered the comment received. The commenter supports the 
NPRM (80 FR 69625, November 10, 2015).

Conclusion

    We reviewed the available data, including the comment received, and 
determined that air safety and the public interest require adopting 
this AD as proposed.

Related Service Information Under 1 CFR Part 51

    RR has issued RR Alert Non-Modification Service Bulletin (NMSB) No. 
RB.211-72-AJ035, Revision 2, dated August 10, 2015 and RR Service 
Bulletin (SB) No. RB.211-72-H754, including the Supplement, Revision 1, 
dated July 29, 2015. The Alert NMSB No. RB.211-72-AJ035, Revision 2, 
dated August 10, 2015, provides guidance on identification and 
replacement of the sealing sleeve, part number (P/N) FW15003. The SB 
No. RB.211-72-H754, including the Supplement, Revision 1, dated July 
29, 2015, provides information on the replacement of the sealing 
sleeve, P/N FW15003, and oil feed tube, P/N FW14193, with a sealing 
sleeve, P/N KH28323 and oil feed tube, P/N KH28324. This service 
information is reasonably available because the interested parties have 
access to it through their normal course of business or by the means 
identified in the ADDRESSES section of this AD.

Costs of Compliance

    We estimate that this AD affects 58 engines installed on airplanes 
of U.S. registry. We also estimate that it will take about 1.2 hours 
per engine to comply with this AD. The average labor rate is $85 per 
hour. Required parts cost about $5,850 per engine. Based on these 
figures, we estimate the cost of this AD on U.S. operators to be 
$345,216.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in

[[Page 13714]]

air commerce by prescribing regulations for practices, methods, and 
procedures the Administrator finds necessary for safety in air 
commerce. This regulation is within the scope of that authority because 
it addresses an unsafe condition that is likely to exist or develop on 
products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska to the extent 
that it justifies making a regulatory distinction, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends part 39 of the Federal Aviation 
Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by removing airworthiness directive (AD) 
2015-04-03, Amendment 39-18105 (80 FR 9380, February 23, 2015) (``AD 
2015-04-03''), and adding the following new AD:

2016-04-13 Rolls-Royce plc: Amendment 39-18407; Docket No. FAA-2014-
0561; Directorate Identifier 2014-NE-12-AD.

(a) Effective Date

    This AD is effective April 19, 2016.

(b) Affected ADs

    This AD supersedes AD 2015-04-03.

(c) Applicability

    This AD applies to Rolls-Royce plc (RR) RB211 Trent 768-60, 772-
60, and 772B-60 turbofan engines, all serial numbers, except those 
engines:
    (1) That have had Modification 72-H754 applied in production, or
    (2) that have been modified in accordance with RR Service 
Bulletin (SB) No. RB.211-72-H754, including the Supplement, Revision 
1, dated July 29, 2015 or initial issue dated October 1, 2014; or
    (3) with sealing sleeve, part number (P/N) FW15003, with 
markings 102013, 112013, or 102013L.

(d) Unsafe Condition

    This AD was prompted by fractures of the high-pressure/
intermediate pressure (HP/IP) turbine support internal oil feed 
tube. We are issuing this AD to prevent failure of the HP/IP turbine 
support internal oil feed tube, uncontained engine failure, and 
damage to the airplane.

(e) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.
    (1) If sealing sleeve, P/N FW15003, is installed without 
markings 102013, 112013, or 102013L, or if the markings cannot be 
sufficiently identified, then within 1,600 flight cycles or 24 
months after the effective date of this AD, whichever occurs first:
    (i) Remove the affected sealing sleeve, P/N FW15003, and replace 
it with a part eligible for installation. Use paragraph 3.A.(4)(b) 
of RR Alert Non-Modification Service Bulletin No. RB.211-72-AJ035, 
Revision 2, dated August 10, 2015, to perform the part replacement, 
or,
    (ii) Remove the affected sealing sleeve, P/N FW15003, and the 
oil feed tube, P/N FW14193, and replace with parts eligible for 
installation. Use paragraph 3.B. or 3.C., as appropriate, of RR SB 
No. RB.211-72-H754, including the Supplement, Revision 1, dated July 
29, 2015, to perform the parts replacement.
    (2) Reserved.

(f) Alternative Methods of Compliance (AMOCs)

    The Manager, Engine Certification Office, FAA, may approve AMOCs 
to this AD. Use the procedures found in 14 CFR 39.19 to make your 
request. You may email your request to: [email protected].

(g) Related Information

    (1) For more information about this AD, contact Philip Haberlen, 
Aerospace Engineer, Engine Certification Office, FAA, Engine & 
Propeller Directorate, 1200 District Avenue, Burlington, MA 01803; 
phone: 781-238-7770; fax: 781-238-7199; email: [email protected].
    (2) Refer to MCAI, European Aviation Safety Agency, AD 2015-0105R1, 
dated August 18, 2015, for more information. You may examine the MCAI 
in the AD docket on the Internet at http://www.regulations.gov/#!documentDetail;D=FAA-2014-0561-0003.

(h) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the incorporation 
by reference (IBR) of the service information listed in this paragraph 
under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do the 
actions required by this AD, unless the AD specifies otherwise.
    (i) Rolls-Royce plc (RR) Alert Non-Modification Service Bulletin 
No. RB.211-72-AJ035, Revision 2, dated August 10, 2015.
    (ii) RR Service Bulletin No. RB.211-72-H754, including the 
Supplement, Revision 1, dated July 29, 2015.
    (3) For RR service information identified in this AD, contact 
Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, DE24 
8BJ, United Kingdom; phone: 011-44-1332-242424; fax: 011-44-1332-
249936; email: http://www.rolls-royce.com/contact/civil_team.jsp; 
Internet: https://customers.rolls-royce.com/public/rollsroycecare.
    (4) You may view this service information at FAA, Engine & 
Propeller Directorate, 1200 District Avenue, Burlington, MA. For 
information on the availability of this material at the FAA, call 781-
238-7125.
    (5) You may view this service information at the National Archives 
and Records Administration (NARA). For information on the availability 
of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Burlington, Massachusetts, on February 12, 2016.
Colleen M. D'Alessandro,
Manager, Engine & Propeller Directorate, Aircraft Certification 
Service.
[FR Doc. 2016-05701 Filed 3-14-16; 8:45 am]
 BILLING CODE 4910-13-P

Document Created: 2016-03-15 04:07:33
Document Modified: 2016-03-15 04:07:33

Category		Regulatory Information
Collection		Federal Register
sudoc Class		AE 2.7: GS 4.107: AE 2.106:
Publisher		Office of the Federal Register, National Archives and Records Administration
Section		Rules and Regulations
Action		Final rule.
Dates		This AD is effective April 19, 2016.
Contact		Philip Haberlen, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 1200 District Avenue, Burlington, MA 01803; phone: 781-238-7770; fax: 781- 238-7199; email: [email protected]
FR Citation		81 FR 13713
RIN Number		2120-AA64
CFR Associated		Air Transportation; Aircraft; Aviation Safety; Incorporation by Reference and Safety

81 FR 13713 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

DEPARTMENT OF TRANSPORTATIONFederal Aviation Administration

Federal Register Volume 81, Issue 50 (March 15, 2016)

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration