81 FR 3823 - SGS North America, Inc.: Grant of Expansion of Recognition and Modification to the List of Appropriate NRTL Program Test Standards
DEPARTMENT OF LABOR
Occupational Safety and Health Administration Federal Register Volume 81, Issue 14 (January 22, 2016)
Occupational Safety and Health Administration
Federal Register Volume 81, Issue 14 (January 22, 2016)
| Page Range | 3823-3825 | |
| FR Document | 2016-01285 |
[Federal Register Volume 81, Number 14 (Friday, January 22, 2016)] [Notices] [Pages 3823-3825] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-01285] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2006-0040] SGS North America, Inc.: Grant of Expansion of Recognition and Modification to the List of Appropriate NRTL Program Test Standards AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: In this notice, OSHA announces its final decision expanding the scope of recognition for SGS North America, Inc., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces its final decision to add a new test standard to the NRTL list of appropriate test standards. DATES: The expansion of the scope of recognition becomes effective on January 22, 2016. FOR FURTHER INFORMATION CONTACT: Information regarding this notice is available from the following sources: Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; email: [email protected]. General and technical information: Contact Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210; telephone: (202) 693-2110; email: [email protected]. OSHA's Web page includes information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html). SUPPLEMENTARY INFORMATION: I. Notice of Final Decision The Occupational Safety and Health Administration hereby gives notice of the expansion of the scope of recognition of SGS North America, Inc. (SGS), as an NRTL. SGS's expansion covers the addition of five recognized testing and certification sites and fourteen additional test standards to its NRTL scope of recognition, including one test standard that will be added to the NRTL Program List of Appropriate Test Standards. OSHA recognition of an NRTL signifies that the organization meets the requirements in Section 1910.7 of Title 29, Code of Federal Regulations (29 CFR 1910.7). Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification. The Agency processes applications by an NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages are available from the Agency's Web site at http://www.osha.gov/dts/otpca/nrtl/index.html. SGS currently has one facility (site) recognized by OSHA for product testing and certification, with its headquarters located at: 620 Old Peachtree Road, Suwanee, Georgia 30024. A complete list of SGS's scope of recognition is available at: https://www.osha.gov/dts/otpca/nrtl/sgs.html. II. General Background on the Application SGS submitted an application, dated October 1, 2014 (OSHA-2006- 0040-0023), to expand its recognition to include the addition of five recognized testing and certification sites located at: SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch, 198 Kezhu Road, Scientech Park Guangzhou Economic & Technology Development District, Guangzhou, Guangdong, China, 510663; SGS-CSTC Standards Technical Services Co., Ltd. Shunde Branch, 198 Kezhu Road, [[Page 3824]] Scientech Park Building 1, European Industrial Park, No. 1, Shunde South Road, Wusha, Daliang, Shunde District, Foshan, Guangdong, China; SGS-CSTC Standards Technical Services Co., Ltd Ningbo Branch, 1-5/F., West of Building 4, Lingyun Industry Park, No. 1177, Lingyun Road, Ningbo National Hi-Tech Zone, Ningbo, Zhejiang, China; SGS-CSTC Standards Services Co., Ltd. Shenzhen Branch, No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nan Shan District, Shenzhen, China 518057; SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd., No 588 West Jindu Road, Xinqiao Town, Songjiang District 201612, Shanghai, China. SGS's application also requested the addition of fourteen additional test standards to its scope of recognition. OSHA staff performed a detailed analysis of the application and other pertinent information. OSHA staff also performed on-site reviews of SGS's testing and certification facilities on June 15, 2015 at SGS Shanghai, June 18, 2015 at SGS Ningbo, June 22, 2015 at SGS Shenzhen, June 24, 2015 at the two SGS Guangdong locations (Guangzhou and Shunde) and recommended expansion of SGS's recognition to include these five sites and these fourteen test standards. OSHA published the preliminary notice announcing SGS's expansion application in the Federal Register on October 13, 2015 (80 FR 61472). The Agency requested comments by October 28, 2015, but it received no comments in response to this notice. OSHA now is proceeding with this final notice to grant expansion of SGS's scope of recognition. To obtain or review copies of all public documents pertaining to the SGS's application, go to www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210. Docket No. OSHA-2006-0040 contains all materials in the record concerning SGS's recognition. III. Final Decision and Order OSHA staff examined SGS's expansion application, conducted a detailed on-site assessment, and examined other pertinent information. Based on its review of this evidence, OSHA finds that SGS meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant SGS's scope of recognition expansion. OSHA limits the expansion of SGS's recognition to include the sites at Shanghai, China; Ningbo, China; Shenzhen, China; Guangzhou, China and Shunde, China as listed above. OSHA's recognition of these sites limits SGS to performing product testing and certifications only to the test standards for which the site has the proper capability and programs, and for test standards in SGS's scope of recognition. This limitation is consistent with the recognition that OSHA grants to other NRTLs that operate multiple sites. OSHA limits the expansion of SGS's recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1 below. Table 1--List of Appropriate Test Standards for Inclusion in SGS's NRTL Scope of Recognition ------------------------------------------------------------------------ Test standard Test standard title ------------------------------------------------------------------------ UL 60745-2-18........................ Hand-Held Motor-Operated Electric Tools--Safety--Part 2-18: Particular Requirements for Strapping Tools. UL 60745-2-19........................ Hand-Held Motor-Operated Electric Tools--Safety--Part 2-19: Particular Requirements for Jointers. UL 60745-2-20........................ Hand-Held Motor-Operated Electric Tools--Safety--Part 2-20: Particular Requirements for Band Saws. UL 60745-2-21........................ Hand-Held Motor-Operated Electric Tools--Safety--Part 2-21: Particular Requirements for Drain Cleaners. UL 60745-2-22........................ Hand-Held Motor-Operated Electric Tools--Safety--Part 2-22: Particular Requirements for Cut- Off Machines. UL 60950-1........................... Information Technology Equipment Safety--Part 1: General Requirements. UL 60950-22.......................... Information Technology Equipment Safety--Part 22: Equipment to be Installed Outdoors. UL 60335-2-24*....................... Safety Requirements for Household and Similar Electrical Appliances, Part 2: Refrigerating Appliances, Ice- Cream Appliances, and Ice- Makers. UL 60335-2-40........................ Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electrical Heat Pumps, Air- Conditioners and Dehumidifiers. UL 60335-2-3......................... Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons. UL 60335-2-8......................... Standard for Safety for Household and Similar Electrical Appliances, Part 2: Shaver, Hair Clipper and Similar Appliances. UL 1778.............................. Uninterruptable Power Systems. UL 2089.............................. Vehicle Battery Adapters. UL 1993.............................. Self-Ballasted Lamps and Lamp Adapters. ------------------------------------------------------------------------ * Test standard new to the NRTL Program. OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, an NRTL's scope of recognition does not include these products. The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved. A. Conditions In addition to those conditions already required by 29 CFR 1910.7, SGS also must abide by the following conditions of the recognition: 1. SGS must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as an NRTL, and provide details of the change(s); 2. SGS must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and 3. SGS must continue to meet the requirements for recognition, including all previously published conditions on SGS's scope of recognition, in all areas for which it has recognition. [[Page 3825]] OSHA also is making a final determination to add a new standard to the NRTL Program's list of appropriate test standards. OSHA determines that this test standard is an appropriate test standard. Table 2 below lists the test standard that will be added to the NRTL Program's list of Appropriate Test Standards. Table 2--Test Standard OSHA Is Adding to the NRTL Program's List of Appropriate Test Standards ------------------------------------------------------------------------ Test standard Test standard title ------------------------------------------------------------------------ UL 60335-2-24........................ Safety Requirements for Household and Similar Electrical Appliances, Part 2: Refrigerating Appliances, Ice- Cream Appliances, and Ice- Makers. ------------------------------------------------------------------------ Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the recognition of SGS, subject to the limitations and conditions specified above. Authority and Signature David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7. Signed at Washington, DC, on January 19, 2016. David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2016-01285 Filed 1-21-16; 8:45 am] BILLING CODE 4510-26-P
![Federal Register / Vol. 81, No. 14 / Friday, January 22, 2016 / Notices 3823
DEPARTMENT OF JUSTICE A notice was published in the Federal recognition of SGS North America, Inc.
Register pursuant to section 6(b) of the (SGS), as an NRTL. SGS’s expansion
Antitrust Division Act on October 23, 2015 (80 FR 64448). covers the addition of five recognized
testing and certification sites and
Notice Pursuant to the National Patricia A. Brink,
fourteen additional test standards to its
Cooperative Research and Production Director of Civil Enforcement, Antitrust NRTL scope of recognition, including
Act of 1993—Advanced Media Division.
one test standard that will be added to
Workflow Association, Inc. [FR Doc. 2016–01261 Filed 1–21–16; 8:45 am] the NRTL Program List of Appropriate
Notice is hereby given that, on
BILLING CODE P Test Standards.
December 23, 2015, pursuant to section OSHA recognition of an NRTL
6(a) of the National Cooperative signifies that the organization meets the
DEPARTMENT OF LABOR requirements in Section 1910.7 of Title
Research and Production Act of 1993,
29, Code of Federal Regulations (29 CFR
15 U.S.C. 4301 et seq. (‘‘the Act’’), Occupational Safety and Health 1910.7). Recognition is an
Advanced Media Workflow Association, Administration acknowledgment that the organization
Inc. has filed written notifications
[Docket No. OSHA–2006–0040] can perform independent safety testing
simultaneously with the Attorney
and certification of the specific products
General and the Federal Trade
SGS North America, Inc.: Grant of covered within its scope of recognition
Commission disclosing changes in its
Expansion of Recognition and and is not a delegation or grant of
membership. The notifications were
Modification to the List of Appropriate government authority. As a result of
filed for the purpose of extending the
NRTL Program Test Standards recognition, employers may use
Act’s provisions limiting the recovery of products properly approved by the
antitrust plaintiffs to actual damages AGENCY: Occupational Safety and Health NRTL to meet OSHA standards that
under specified circumstances. Administration (OSHA), Labor. require testing and certification.
Specifically, Aperi Corporation, The Agency processes applications by
ACTION: Notice.
Camarillo, CA; Atos, London, UNITED an NRTL for initial recognition, or for
KINGDOM; Axon Digital Design, B.V., SUMMARY: In this notice, OSHA expansion or renewal of this
Gilze, THE NETHERLANDS; Barco announces its final decision expanding recognition, following requirements in
Silex, Louvain-La-Neuve, BELGIUM; the scope of recognition for SGS North Appendix A to 29 CFR 1910.7. This
Embrionix Design, Inc., Laval, Quebec, America, Inc., as a Nationally appendix requires that the Agency
CANADA; Evertz Microsystems, Recognized Testing Laboratory (NRTL). publish two notices in the Federal
Burlington, Ontario, CANADA; Lawo Additionally, OSHA announces its final Register in processing an application. In
AG, Rastati, GERMANY; Malooba, decision to add a new test standard to the first notice, OSHA announces the
Launceston, UNITED KINGDOM; the NRTL list of appropriate test application and provides its preliminary
Matrox Electronic Systems, Dorval, standards. finding and, in the second notice, the
Quebec, CANADA; Mellanox Agency provides its final decision on
Technologies, Inc., Sunnyvale, CA; DATES: The expansion of the scope of
recognition becomes effective on the application. These notices set forth
Nevion Unlimited, Theale, UNITED the NRTL’s scope of recognition or
KINGDOM; NewTek, Inc., San Antonio, January 22, 2016.
modifications of that scope. OSHA
TX; NRK, Oslo, NORWAY; Panasonic FOR FURTHER INFORMATION CONTACT:
maintains an informational Web page
Corporation, Osaka, JAPAN; Suitcase Information regarding this notice is for each NRTL that details its scope of
TV Ltd., Ipswich, UNITED KINGDOM; available from the following sources: recognition. These pages are available
UR Sveriges Utbildningsradio AB, Press inquiries: Contact Mr. Frank from the Agency’s Web site at http://
Stockholm, SWEDEN; and Christine Meilinger, Director, OSHA Office of www.osha.gov/dts/otpca/nrtl/
MacNeill (individual member), Communications, U.S. Department of index.html.
Achnasheen, UNITED KINGDOM, have Labor, 200 Constitution Avenue NW., SGS currently has one facility (site)
been added as parties to this venture. Room N–3647, Washington, DC 20210; recognized by OSHA for product testing
Also, Rohde & Schwarz DVS GmbH, telephone: (202) 693–1999; email: and certification, with its headquarters
Hanover, GERMANY; and Savis meilinger.francis2@dol.gov. located at: 620 Old Peachtree Road,
Vietnam Corp., Hanoi, VIETNAM, have General and technical information: Suwanee, Georgia 30024. A complete
withdrawn as parties to this venture. Contact Kevin Robinson, Director, list of SGS’s scope of recognition is
No other changes have been made in Office of Technical Programs and available at: https://www.osha.gov/dts/
either the membership or planned Coordination Activities, Directorate of otpca/nrtl/sgs.html.
activity of the group research project. Technical Support and Emergency
Membership in this group research Management, Occupational Safety and II. General Background on the
project remains open, and Advanced Health Administration, U.S. Department Application
Media Workflow Association, Inc. of Labor, 200 Constitution Avenue NW., SGS submitted an application, dated
intends to file additional written Room N–3655, Washington, DC 20210; October 1, 2014 (OSHA–2006–0040–
notifications disclosing all changes in telephone: (202) 693–2110; email: 0023), to expand its recognition to
membership. robinson.kevin@dol.gov. OSHA’s Web include the addition of five recognized
On March 28, 2000, Advanced Media page includes information about the testing and certification sites located at:
NRTL Program (see http://www.osha.
mstockstill on DSK4VPTVN1PROD with NOTICES
Workflow Association, Inc. filed its SGS–CSTC Standards Technical
original notification pursuant to section gov/dts/otpca/nrtl/index.html). Services Co., Ltd. Guangzhou Branch,
6(a) of the Act. The Department of SUPPLEMENTARY INFORMATION: 198 Kezhu Road, Scientech Park
Justice published a notice in the Federal Guangzhou Economic & Technology
Register pursuant to section 6(b) of the I. Notice of Final Decision Development District, Guangzhou,
Act on June 29, 2000 (65 FR 40127). The Occupational Safety and Health Guangdong, China, 510663; SGS–CSTC
The last notification was filed with Administration hereby gives notice of Standards Technical Services Co., Ltd.
the Department on September 24, 2015. the expansion of the scope of Shunde Branch, 198 Kezhu Road,
VerDate Sep<11>2014 16:59 Jan 21, 2016 Jkt 238001 PO 00000 Frm 00048 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1](https://thefederalregister.org/doc/81_FR_3837/page/1.svg)
![Federal Register / Vol. 81, No. 14 / Friday, January 22, 2016 / Notices 3825
OSHA also is making a final test standards. OSHA determines that standard that will be added to the NRTL
determination to add a new standard to this test standard is an appropriate test Program’s list of Appropriate Test
the NRTL Program’s list of appropriate standard. Table 2 below lists the test Standards.
TABLE 2—TEST STANDARD OSHA IS ADDING TO THE NRTL PROGRAM’S LIST OF APPROPRIATE TEST STANDARDS
Test standard Test standard title
UL 60335–2–24 ..... Safety Requirements for Household and Similar Electrical Appliances, Part 2: Refrigerating Appliances, Ice-Cream Appli-
ances, and Ice-Makers.
Pursuant to the authority in 29 CFR completion of all structural and excluded from federal OSHA coverage
1910.7, OSHA hereby expands the developmental aspects of New Jersey’s under section 3(5) of the OSH Act.
recognition of SGS, subject to the approved State Plan, and certifying this Under these regulations, the Assistant
limitations and conditions specified completion. This certification attests to Secretary of Labor for Occupational
above. the fact that New Jersey now has in Safety and Health (‘‘Assistant
place those structural components Secretary’’) may approve a State Plan for
Authority and Signature
necessary for an effective State Plan for State and Local Government Employees,
David Michaels, Ph.D., MPH, State and Local Government Employees.
Assistant Secretary of Labor for if the Plan provides for the development
(Enforcement of occupational safety and
Occupational Safety and Health, 200 and enforcement of standards relating to
health standards with regard to private
Constitution Avenue NW., Washington, hazards in employment covered by the
sector employers and employees in the
DC 20210, authorized the preparation of Plan which are or will be at least as
State of New Jersey remains the
this notice. Accordingly, the Agency is effective in providing safe and healthful
responsibility of the U.S. Department of
issuing this notice pursuant to 29 U.S.C. employment and places of employment
Labor, OSHA).
657(g)(2), Secretary of Labor’s Order No. for public employees as standards
DATES: Effective Date: January 22, 2016. promulgated and enforced by federal
1–2012 (77 FR 3912, Jan. 25, 2012), and
FOR FURTHER INFORMATION CONTACT: For OSHA under section 6 of the OSH Act,
29 CFR 1910.7.
general information and press inquiries, giving due consideration to differences
Signed at Washington, DC, on January 19, contact Frank Meilinger, Director, Office between public and private sector
2016. of Communications, Room N–3647, employment. Following initial approval,
David Michaels, OSHA, U.S. Department of Labor, 200 the state may begin enforcement of its
Assistant Secretary of Labor for Occupational Constitution Avenue NW., Washington, safety and health standards in the
Safety and Health. DC 20210; telephone (202) 693–1999; public sector and receive up to 50
[FR Doc. 2016–01285 Filed 1–21–16; 8:45 am] email: meilinger.francis2@dol.gov. For percent federal funding for the cost of
BILLING CODE 4510–26–P technical inquiries, contact Douglas Plan operations.
Kalinowski, Director, Directorate of
A State Plan for State and Local
Cooperative and State Programs, OSHA,
DEPARTMENT OF LABOR Government Employees may receive
U.S. Department of Labor, 200
initial approval even though at the time
Constitution Avenue NW., Room N–
Occupational Safety and Health
3700, Washington, DC 20210; telephone of submission not all essential
Administration components of the Plan are in place.
(202) 693–2244; email:
[Docket No. OSHA–T034–2006–0779] kalinowski.doug@dol.gov. Electronic Pursuant to 29 CFR 1956.2(b), the
copies of this Federal Register notice, as Assistant Secretary may initially
New Jersey State Plan for State and well as all OSHA Federal Register approve the submission as a
Local Government Employees; notices mentioned in this document, are ‘‘developmental plan,’’ and a schedule
Approval of Plan Supplements and available on OSHA’s Web site at http:// within which the state must complete
Certification of Completion of www.osha.gov. all ‘‘developmental steps’’ within a
Developmental Steps three year period is issued as part of the
SUPPLEMENTARY INFORMATION:
initial approval decision. 29 CFR part
AGENCY: Occupational Safety and Health I. Background 1953 provides procedures for the review
Administration (OSHA), Labor. and approval of changes and progress in
ACTION: Notice. Section 18 of the Occupational Safety
the development and implementation of
and Health Act of 1970 (the ‘‘OSH Act;’’
the State Plan.
SUMMARY: The New Jersey Department 29 U.S.C. 667) provides that a state
of Labor and Workforce Development which desires to assume responsibility When the Assistant Secretary has
(LWD) submitted timely documentation for the development and enforcement of reviewed and approved all
attesting to the completion of all occupational safety and health developmental submissions and finds
structural and developmental aspects of standards may submit for OSHA review that the state has satisfactorily
its State Plan for State and Local and approval a State Plan for such completed all developmental steps
Government Employees as approved by development and enforcement. specified in the initial approval
decision, a notice certifying such
mstockstill on DSK4VPTVN1PROD with NOTICES
the Occupational Safety and Health Regulations at 29 CFR part 1956 provide
Administration (OSHA). After extensive that a state may voluntarily submit a completion is published in the Federal
review of the submissions and State Plan for the development and Register (see 29 CFR 1956.23 and
opportunity for correction, Plan enforcement of occupational safety and 1902.34). Certification attests to the
supplements constituting an updated health standards applicable only to structural completeness of the Plan but
and revised State Plan were submitted. employers and employees of the state does not render judgment as to the
OSHA is approving the revised State and its political subdivisions. State and adequacy or effectiveness of state
Plan, which documents the satisfactory local government employers are performance.
VerDate Sep<11>2014 16:59 Jan 21, 2016 Jkt 238001 PO 00000 Frm 00050 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1](https://thefederalregister.org/doc/81_FR_3837/page/3.svg)
Document Created: 2016-01-22 01:16:35
Document Modified: 2016-01-22 01:16:35
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | The expansion of the scope of recognition becomes effective on January 22, 2016. | |
| Contact | Information regarding this notice is available from the following sources: | |
| FR Citation | 81 FR 3823 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR