81 FR 45148 - Certain New Chemicals; Receipt and Status Information for May 2016
ENVIRONMENTAL PROTECTION AGENCY Federal Register Volume 81, Issue 133 (July 12, 2016)
Federal Register Volume 81, Issue 133 (July 12, 2016)
| Page Range | 45148-45153 | |
| FR Document | 2016-16448 |
[Federal Register Volume 81, Number 133 (Tuesday, July 12, 2016)] [Notices] [Pages 45148-45153] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-16448] ======================================================================= ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0024; FRL-9948-32] Certain New Chemicals; Receipt and Status Information for May 2016 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from May 2, 2016 to May 31, 2016. DATES: Comments identified by the specific case number provided in this document, must be received on or before August 11, 2016. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0024, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD (7407M) Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from May 2, 2016 to May 31, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. [[Page 45149]] IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 66 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From May 2, 2016 to May 31, 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected end Case No. Date received date for EPA Manufacturer/ Importer Use(s) Chemical identity review -------------------------------------------------------------------------------------------------------------------------------------------------------- P-16-0387............................ 5/31/2016 8/29/2016 CBI..................... (G) Additives for (G) Aliphatic polycarboxylic polymers. acid, polymer with alicyclic polyhydric alcohol and polyoxyalkylene. P-16-0393............................ 5/31/2016 8/29/2016 CBI..................... (S) Plasticizer for use (G) Di-substituted with polymers. benzenedicarboxylic acid ester. P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Ink component....... (G) Polyester acrylate. P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Coating component... (G) Polyester acrylate. P-16-0102............................ 5/13/2016 8/11/2016 CBI..................... (G) Adhesive component.. (G) Polyester acrylate. P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (S) General industrial (G) Amide. oil. P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (S) Hydraulic oil....... (G) Amide. P-16-0205............................ 5/17/2016 8/15/2016 CBI..................... (G) Lubricant oil....... (G) Amide. P-16-0271............................ 5/20/2016 8/18/2016 CBI..................... (S) Flexible pvc (S) 1,2,4- plasticizer for wire benzenetricarboxylic acid, insulation. 1,2,4-trinonyl ester. P-16-0282............................ 5/10/2016 8/8/2016 CBI..................... (S) Paint dryier........ (G) Manganese complexes. P-16-0323............................ 5/17/2016 8/15/2016 Allnex USA, Inc......... (G) Coating resin....... (G) Formaldehyde, reaction products with substituted carbomonocycle-substituted heteromonocycle-alkylene glycol bis [[[substituted(oxoneoalky)ox y]alkyl]amino]alky] ether polymer and alkyl substituted alkanediamine, acetate (salts). P-16-0348............................ 5/7/2016 8/5/2016 CBI..................... (G) Industrial lubricant (G) Polypentaerythritol, mixed esters with linear and branched monoacids. P-16-0349............................ 5/11/2016 8/9/2016 CBI..................... (G) Fuel additive....... (G) Quaternary ammonium salt of polyisobutene succinic acid. P-16-0350............................ 5/2/2016 7/31/2016 CBI..................... (G) Polymer reactant.... (G) Polyaralkyl aryl ester of methacrylic acid. P-16-0351............................ 5/2/2016 7/31/2016 Solazyme, Inc........... (G) Renewable oil source (G) Glycerides, c14-18 and for fuels. c16-c18 unsaturated, from fermentation. P-16-0351............................ 5/2/2016 7/31/2016 Solazyme, Inc........... (G) Feedstock for (G) Glycerides, c14-18 and oleochemical industry. c16-c18 unsaturated, from fermentation. P-16-0353............................ 5/4/2016 8/2/2016 Gantrade Corp........... (S) Chain extender and (S) Benzenamine, 4-[(4-amino- curative for use in 3-chlorophenyl)methyl]-2- polymer manufacturing. ethyl-. P-16-0354............................ 5/5/2016 8/3/2016 CBI..................... (G) Intermediate........ (G) Esteramine. P-16-0355............................ 5/5/2016 8/3/2016 CBI..................... (G) Intermediate........ (G) Esteramine. P-16-0356............................ 5/5/2016 8/3/2016 CBI..................... (G) Wellbore additive... (G) Quaternary ammonium salts. P-16-0357............................ 5/5/2016 8/3/2016 CBI..................... (G) Wellbore additive... (G) Quaternary ammonium salts. P-16-0358............................ 5/5/2016 8/3/2016 CBI..................... (S) Intermediate for (G) Alkylphenol. further polymer reaction. P-16-0359............................ 5/5/2016 8/3/2016 Dic International, USA, (G) Pigment additive for (G) Carbopolycycle- LLC. industrial coatings. bis(diazonium), dihalo-, chloride (1:2), reaction products with metal hydroxide, 4- [(dioxoalkyl)amino]substitut ed benzene, 2- [(dioxoalkyl)amino]substitut ed benzene, 5- [(dioxoalkyl)amino]-2- hydroxy-substituted benzene and oxo-n-phenylalkanamide. [[Page 45150]] P-16-0359............................ 5/5/2016 8/3/2016 Dic International USA, (G) Pigment additives (G) Carbopolycycle- LLC. for industrial coatings. bis(diazonium), dihalo-, chloride (1:2), reaction products with metal hydroxide, 4- [(dioxoalkyl)amino]substitut ed benzene, 2- [(dioxoalkyl)amino]substitut ed benzene, 5- [(dioxoalkyl)amino]-2- hydroxy-substituted benzene and oxo-n-phenylalkanamide. P-16-0360............................ 5/6/2016 8/4/2016 Oleon Americas, Inc..... (G) Fuel additive....... (S) Poly (oxy-1,2- ethanediyl), alpha- (1- oxodocosyl)- omega- [(1- oxodocosyl)oxy]-. P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Plastic (S) Pulp, cellulose, reaction reinforcement. products with lignin [nanocrystals]. P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Binders............. (S) Pulp, cellulose, reaction products with lignin [nanocrystals]. P-16-0361............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Viscosifying agent.. (S) Pulp, cellulose, reaction products with lignin [nanocrystals]. P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Binders............. (S) Pulp, cellulose, reaction products with lignin [nanofibrils]. P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Plastic (S) Pulp, cellulose, reaction reinforcement. products with lignin [nanofibrils]. P-16-0362............................ 5/12/2016 8/10/2016 American Process, Inc... (G) Viscosifying agent.. (S) Pulp, cellulose, reaction products with lignin [nanofibrils]. P-16-0363............................ 5/10/2016 8/8/2016 CBI..................... (G) Open, non-dispersive (G) Blocked polyester polyurethane, neutralized. P-16-0364............................ 5/10/2016 8/8/2016 CBI..................... (G) Intermediate used (G) Nitrile-butadiene- completely on site. acrylate terpolymers. P-16-0365............................ 5/16/2016 8/14/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Alkyl carbonate, polymer coating resin. with, substituted alkanes and substituted heteromonocycle, substituted alkyl acrylate-blocked. P-16-0366............................ 5/11/2016 8/9/2016 CBI..................... (G) Open, non-dispersive (G) Blocked polyisocyanate. P-16-0367............................ 5/20/2016 8/18/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Substituted coating resin. heteromonocylce, polymer with substituted alkane and ethoxylated alkane[acirc][iquest][atilde ][iquest][acirc][iquest][ati lde][iquest][acirc][cent][at ilde][iquest][acirc][iquest] [atilde][iquest][acirc][ique st][atilde][iquest][acirc][i quest][atilde][iquest][acirc ][iquest][atilde][iquest][ac irc][iquest], substituted heteromonocycle substituted [acirc][iquest][atilde][ique st][acirc][iquest][atilde][i quest][acirc][cent][atilde][ iquest][acirc][iquest][atild e][iquest][acirc][iquest][at ilde][iquest][acirc][iquest] [atilde][iquest][acirc][ique st][acirc][iquest][atilde][i quest][acirc][iquest]alkyl ester- [acirc][iquest][atilde][ique st][acirc][iquest][atilde][i quest][acirc][cent][atilde][ iquest][acirc][iquest][atild e][iquest][acirc][iquest][at ilde][iquest][acirc][iquest] [atilde][iquest][acirc][ique st][acirc][iquest]blocked. P-16-0368............................ 5/13/2016 8/11/2016 CBI..................... (S) Adhesive coating for (G) Aromatic dicarboxylic carpet backing. acid, polymer with adipic acid and alkanediol. P-16-0369............................ 5/13/2016 8/11/2016 Allnex USA, Inc......... (S) Ultra violet curable (G) Substituted coating resin. heteromonocycle, telomer with substituted carbomonocycles, substituted alkyl ester. P-16-0370............................ 5/13/2016 8/11/2016 CBI..................... (G) Crosslinker for (G) Polysiloxane with adhesives and coatings. functional groups. P-16-0371............................ 5/13/2016 8/11/2016 CBI..................... (G) Wetting and (G) Polyphosphoric acids dispersing additive. polyether polyethene alkyl alkyl. P-16-0372............................ 5/13/2016 8/11/2016 CBI..................... (G) Wetting and (G) Polyphosphoric acids dispersing additive. polyether alkyl polyethylene polymer. P-16-0373............................ 5/13/2016 8/11/2016 CBI..................... (S) Ultra violet (G) absorber for plastic Tris(alkyloxyphenyl)triazine articles. compounds. P-16-0374............................ 5/17/2016 8/15/2016 CBI..................... (G) Oil additive........ (G) Metal branched alkyl substituted carbomonocycle complexes with substituted alkyl carbomonocycle. P-16-0375............................ 5/19/2016 8/17/2016 CBI..................... (G) Binder for seal (G) Alkyl methacrylates, application. polymer with olefines. P-16-0376............................ 5/18/2016 8/16/2016 CBI..................... (G) Photolithography.... (G) Hydroxystyrene resin. P-16-0377............................ 5/17/2016 8/15/2016 CBI..................... (G) Film component...... (G) Polyester polyol. P-16-0378............................ 5/17/2016 8/15/2016 CBI..................... (G) Film component...... (G) Polyester polyol. P-16-0379............................ 5/18/2016 8/16/2016 CBI..................... (G) Intermediate for (G) Vinyl functional polymer synthesis. polymethylalkylpolymer. [[Page 45151]] P-16-0380............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). P-16-0381............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Propanoic acid, 2-hydroxy- electrocoat resin. , compds. with hydrolyzed bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0381............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Propanoic acid, 2-hydroxy- for automotive , compds. with hydrolyzed electrocoat resin. bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0382............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates (salts). P-16-0382............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates (salts). P-16-0383............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). P-16-0383............................ 5/18/2016 8/16/2016 CBI..................... (G) Component in (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). [[Page 45152]] P-16-0384............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of an (G) Propanoic acid, 2-hydroxy- electrocoat resin. , compds. with hydrolyzed bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0384............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Propanoic acid, 2-hydroxy- for automotive , compds. with hydrolyzed electrocoat resin. bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0385............................ 5/18/2016 8/16/2016 CBI..................... (G) Component of (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates (salts). P-16-0385............................ 5/18/2016 8/16/2016 CBI..................... (S) Anti-crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-n1-(1,3- dimethylbutylidene)-n2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates (salts). P-16-0386............................ 5/20/2016 8/18/2016 CBI..................... (S) Additive for motor (S) Hexanedioic acid, 1,6- oil formulations and bis(3,5,5-trimethylhexyl) gear oil lubricants. ester. P-16-0388............................ 5/20/2016 8/18/2016 CBI..................... (G) Hardener for epoxy (G) Aliphatic polyamines, coating. polymers with bisphenol a and epichlorohydrin. P-16-0389............................ 5/23/2016 8/21/2016 CBI..................... (G) Oil & gas extraction (G) Polymer of substituted acrylic acid, mercaptoethanol and bromohexane. P-16-0390............................ 5/27/2016 8/25/2016 CBI..................... (S) Coating resin used (G) Alkyl alkenoic acid alkyl in anti-fogging clear ester polymer with alkyl coat applied to alkenoate, dialkyl automotive parts. alkenamide, hydroxy-modified alkenoic acid derivative, and sulfonic-modified alkenoic acid derivative. P-16-0391............................ 5/23/2016 8/21/2016 CBI..................... (G) Stabilizer.......... (G) Polyester polyol polymer with aliphatic isocyanate and phenol derivates. P-16-0392............................ 5/25/2016 8/23/2016 CBI..................... (G) Wax................. (G) Modified vegetable oil. P-16-0394............................ 5/31/2016 8/29/2016 CBI..................... (G) Adhesive............ (G) Benzenedicarboxylic acid, polymer with decanedioic acid and dodecanedioic acid, ethanediol, hexanedioic acid, hexanediol, alpha- hydro-omega- hydroxypoly[oxy(methyl-1,2- ethanediyl)], isobenzofurandione,1,1'- methylenebis[4- isocyanatobenzene], phenol and trimethylbicyclo hept-2- ene. -------------------------------------------------------------------------------------------------------------------------------------------------------- For the 28 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. [[Page 45153]] Table 2--NOCs Received From May 2, 2016 to May 31, 2016 ---------------------------------------------------------------------------------------------------------------- Projected end Case No. Date received date of Chemical identity commencement ---------------------------------------------------------------------------------------------------------------- P-89-1056................................. 5/9/2016 8/31/2005 (G) Polyurethane. P-92-0303................................. 5/6/2016 6/23/1992 (S) Phenol, 2,4,6- tris[(dimethylamino)methyl]-, reaction products with benzyl chloride. P-99-0096................................. 5/6/2016 5/4/2016 (G) Amine-modified polyether acrylate. P-13-0916................................. 5/10/2016 4/17/2016 (G) Polyurethane. P-14-0076................................. 5/5/2016 11/18/2014 (G) Synthetic polyol esters. P-14-0078................................. 5/5/2016 9/11/2014 (G) Synthetic polyol ester. P-14-0079................................. 5/5/2016 6/26/2014 (G) Synthetic polyol esters. P-14-0711................................. 5/10/2016 5/3/2016 (G) Polyurethane. P-14-0855................................. 5/10/2016 4/18/2016 (G) Polyurethane. P-14-0856................................. 5/10/2016 4/18/2016 (G) Polyurethane. P-14-0857................................. 5/10/2016 4/18/2016 (G) Polyurethane. P-14-0858................................. 5/10/2016 4/18/2016 (G) Polyurethane. P-15-0120................................. 5/11/2016 2/24/2016 (G) Substituted benzyl acrylate. P-15-0276................................. 5/23/2016 5/2/2016 (G) Functionalized carbon nanotubes. P-15-0303................................. 5/19/2016 5/17/2016 (S) Cellulose, carboxymethyl ether, sodium salt, polymer with bis(isocyanatomethyl)benzene, 2,2-dimethoxyacetaldehyde, ethanedial, 2-ethyl-2- (hydroxymethyl)-1,3-propanediol, 2-oxoacetic acid, 1h-1,2,4- triazole-3,5-diamine and 1,3,5- triazine-2,4,6-triamine. P-15-0747................................. 5/26/2016 5/13/2016 (G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-16-0056................................. 5/26/2016 5/5/2016 (G) Dialkyl fattyalkylamino propanamide alkylamine acetates. P-16-0124................................. 5/13/2016 5/1/2016 (G) Substituted alkanoic acid-, salts with substituted alkanol- blocked haloalkyl heteromonocycle substituted carbomonocycle polymer alkyl alkanoate substituted carbomonocycle- trialkylcarbomonocycle-alkyl imine reaction products. P-16-0126................................. 5/13/2016 5/1/2016 (G) Substituted carbomonocycle, polymer with substituted heteromonocycle, reaction products with substituted amine, substituted amine and substituted alkanol, alkylalkanoates substituted carbomonocycle. P-16-0135................................. 5/2/2016 4/14/2016 (G) Polyesters, fatty alkyl amindes terminated. P-16-0141................................. 5/4/2016 5/1/2016 (G) Polyalkyl methacrylate copolymer. P-16-0190................................. 5/20/2016 4/25/2016 (G) Aryl polyolefin. P-16-0210................................. 5/23/2016 5/11/2016 (G) Alkanepolycarboxylic acids, polymer with alkanepolyols, benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and polyether polyols, benzenedicarboxylic acid derivative and caprolactone. P-16-0210................................. 5/23/2016 5/12/2016 (G) Alkanepolycarboxylic acids, polymer with alkanepolyols, benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and polyether polyols, benzenedicarboxylic acid derivative and caprolactone. P-16-0211................................. 5/23/2016 5/13/2016 (G) Polymer of alkyl acrylate, caprolactone, methylenebis[isocyanatobenzene], alkyl methacrylates, polyether polyol, alkanepolycarboxylic acid, substituted methacrylate and alkanepolyol. P-16-0212................................. 5/23/2016 5/17/2016 (G) Polymer of alkanepolyols, methylenebis[isocyantobenzene], polyether polyol, alkyl methacrylates and acrylate, methacrylic acid, substitued methacrylic acid and alkanepolycarboxylic acid. P-16-0213................................. 5/23/2016 5/10/2016 (G) Polymer of substituted benzenes, alkanepolyols, alkanepolycarboxylic acids, methylenebis[isocyanatobenzene], polyether polyol, neopentyl glycol and a substituted glycol. P-16-0214................................. 5/23/2016 5/10/2016 (G) Polyether polyols, polymers with substituted benzenes, methylenebis[isocyanatobenzene], alkanepolyols, caprolactone and a substituted glycol. ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: July 5, 2016. Pamela S. Myrick, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2016-16448 Filed 7-11-16; 8:45 am] BILLING CODE 6560-50-P
![45148 Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
the project, with appropriate number EPA–HQ–OPPT–2016–0024, complete version of the comment that
environmental measures, would not and the specific PMN number or TME includes information claimed as CBI, a
constitute a major federal action number for the chemical related to your copy of the comment that does not
significantly affecting the quality of the comment, by one of the following contain the information claimed as CBI
human environment. methods: must be submitted for inclusion in the
A copy of the final EA is available for • Federal eRulemaking Portal: http:// public docket. Information so marked
review at the Commission in the Public www.regulations.gov. Follow the online will not be disclosed except in
Reference Room or may be viewed on instructions for submitting comments. accordance with procedures set forth in
the Commission’s Web site at Do not submit electronically any 40 CFR part 2.
www.ferc.gov using the ‘‘eLibrary’’ link. information you consider to be
Confidential Business Information (CBI) 2. Tips for preparing your comments.
Enter the docket number, excluding the
or other information whose disclosure is When preparing and submitting your
last three digits, in the docket number
restricted by statute. comments, see the commenting tips at
field to access the document. For
• Mail: Document Control Office http://www.epa.gov/dockets/
assistance, contact FERC Online
(7407M), Office of Pollution Prevention comments.html.
Support at FERCOnlineSupport@
ferc.gov or toll-free at 1–866–208–3676, and Toxics (OPPT), Environmental II. What action is the agency taking?
or for TTY, 202–502–8659. Protection Agency, 1200 Pennsylvania
You may also register online at Ave. NW., Washington, DC 20460–0001. This document provides receipt and
www.ferc.gov/docs-filing/ • Hand Delivery: To make special status reports, which cover the period
esubscription.asp to be notified via arrangements for hand delivery or from May 2, 2016 to May 31, 2016, and
email of new filings and issuances delivery of boxed information, please consists of the PMNs and TMEs both
related to this or other pending projects. follow the instructions at http:// pending and/or expired, and the NOCs
For assistance, contact FERC Online www.epa.gov/dockets/contacts.html. to manufacture a new chemical that the
Support. Additional instructions on Agency has received under TSCA
For further information, please commenting or visiting the docket, section 5 during this time period.
contact Chelsea Hudock at (202) 502– along with more information about
dockets generally, is available at http:// III. What is the Agency’s authority for
8448 or by email at chelsea.hudock@
www.epa.gov/dockets. taking this action?
ferc.gov or Lee Emery by telephone at
(202) 502–8379 or by email at FOR FURTHER INFORMATION CONTACT: For
Under TSCA, 15 U.S.C. 2601 et seq.,
lee.emery@ferc.gov. technical information contact: Jim EPA classifies a chemical substance as
Rahai, IMD (7407M) Office of Pollution either an ‘‘existing’’ chemical or a
Dated: July 5, 2016.
Prevention and Toxics, Environmental ‘‘new’’ chemical. Any chemical
Kimberly D. Bose, Protection Agency, 1200 Pennsylvania
Secretary. substance that is not on EPA’s TSCA
Ave. NW., Washington, DC 20460–0001; Inventory is classified as a ‘‘new
[FR Doc. 2016–16396 Filed 7–11–16; 8:45 am] telephone number: (202) 564–8593;
chemical,’’ while those that are on the
BILLING CODE 6717–01–P email address: rahai.jim@epa.gov.
TSCA Inventory are classified as an
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422 ‘‘existing chemical.’’ For more
South Clinton Ave., Rochester, NY information about the TSCA Inventory
ENVIRONMENTAL PROTECTION go to: http://www.epa.gov/opptintr/
AGENCY 14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@ newchems/pubs/inventory.htm.
[EPA–HQ–OPPT–2016–0024; FRL–9948–32] epa.gov. Anyone who plans to manufacture or
SUPPLEMENTARY INFORMATION:
import a new chemical substance for a
Certain New Chemicals; Receipt and non-exempt commercial purpose is
Status Information for May 2016 I. General Information required by TSCA section 5 to provide
AGENCY: Environmental Protection A. Does this action apply to me? EPA with a PMN, before initiating the
Agency (EPA). activity. Section 5(h)(1) of TSCA
This action is directed to the public authorizes EPA to allow persons, upon
ACTION: Notice. in general. As such, the Agency has not application, to manufacture (includes
SUMMARY: EPA is required under the attempted to describe the specific import) or process a new chemical
Toxic Substances Control Act (TSCA) to entities that this action may apply to. substance, or a chemical substance
publish in the Federal Register a notice Although others may be affected, this subject to a significant new use rule
of receipt of a premanufacture notice action applies directly to the submitters (SNUR) issued under TSCA section 5(a),
(PMN); an application for a test of the actions addressed in this for ‘‘test marketing’’ purposes, which is
marketing exemption (TME), both document. referred to as a test marketing
pending and/or expired; and a periodic B. What should I consider as I prepare exemption, or TME. For more
status report on any new chemicals my comments for EPA? information about the requirements
under EPA review and the receipt of 1. Submitting CBI. Do not submit this applicable to a new chemical go to:
notices of commencement (NOC) to information to EPA through http://www.epa.gov/oppt/newchems.
manufacture those chemicals. This regulations.gov or email. Clearly mark Under TSCA sections 5(d)(2) and
document covers the period from May 2, the part or all of the information that 5(d)(3), EPA is required to publish in
mstockstill on DSK3G9T082PROD with NOTICES
2016 to May 31, 2016. you claim to be CBI. For CBI the Federal Register a notice of receipt
DATES: Comments identified by the information in a disk or CD–ROM that of a PMN or an application for a TME
specific case number provided in this you mail to EPA, mark the outside of the and to publish in the Federal Register
document, must be received on or disk or CD–ROM as CBI and then periodic reports on the status of new
before August 11, 2016. identify electronically within the disk or chemicals under review and the receipt
ADDRESSES: Submit your comments, CD–ROM the specific information that of NOCs to manufacture those
identified by docket identification (ID) is claimed as CBI. In addition to one chemicals.
VerDate Sep<11>2014 18:30 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00028 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/1.svg)
![Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices 45149
IV. Receipt and Status Reports specific information provided by the PMN; the date the PMN was received by
As used in each of the tables in this submitter was claimed as CBI. EPA; the projected end date for EPA’s
unit, (S) indicates that the information For the 66 PMNs received by EPA review of the PMN; the submitting
in the table is the specific information during this period, Table 1 provides the manufacturer/importer; the potential
provided by the submitter, and (G) following information (to the extent that uses identified by the manufacturer/
indicates that the information in the such information is not claimed as CBI): importer in the PMN; and the chemical
table is generic information because the The EPA case number assigned to the identity.
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016
Projected end Manufacturer/
Case No. Date received date for EPA Use(s) Chemical identity
Importer
review
P–16–0387 .............. 5/31/2016 8/29/2016 CBI .......................... (G) Additives for (G) Aliphatic polycarboxylic acid, polymer
polymers. with alicyclic polyhydric alcohol and
polyoxyalkylene.
P–16–0393 .............. 5/31/2016 8/29/2016 CBI .......................... (S) Plasticizer for (G) Di-substituted benzenedicarboxylic
use with polymers. acid ester.
P–16–0102 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Ink component .. (G) Polyester acrylate.
P–16–0102 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Coating compo- (G) Polyester acrylate.
nent.
P–16–0102 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Adhesive com- (G) Polyester acrylate.
ponent.
P–16–0205 .............. 5/17/2016 8/15/2016 CBI .......................... (S) General indus- (G) Amide.
trial oil.
P–16–0205 .............. 5/17/2016 8/15/2016 CBI .......................... (S) Hydraulic oil ...... (G) Amide.
P–16–0205 .............. 5/17/2016 8/15/2016 CBI .......................... (G) Lubricant oil ...... (G) Amide.
P–16–0271 .............. 5/20/2016 8/18/2016 CBI .......................... (S) Flexible pvc (S) 1,2,4-benzenetricarboxylic acid,
plasticizer for wire 1,2,4-trinonyl ester.
insulation.
P–16–0282 .............. 5/10/2016 8/8/2016 CBI .......................... (S) Paint dryier ....... (G) Manganese complexes.
P–16–0323 .............. 5/17/2016 8/15/2016 Allnex USA, Inc ...... (G) Coating resin .... (G) Formaldehyde, reaction products
with substituted carbomonocycle-sub-
stituted heteromonocycle-alkylene glycol
bis [[[sub-
stituted(oxoneoalky)oxy]alkyl]amino]alky]
ether polymer and alkyl substituted
alkanediamine, acetate (salts).
P–16–0348 .............. 5/7/2016 8/5/2016 CBI .......................... (G) Industrial lubri- (G) Polypentaerythritol, mixed esters with
cant. linear and branched monoacids.
P–16–0349 .............. 5/11/2016 8/9/2016 CBI .......................... (G) Fuel additive ..... (G) Quaternary ammonium salt of
polyisobutene succinic acid.
P–16–0350 .............. 5/2/2016 7/31/2016 CBI .......................... (G) Polymer (G) Polyaralkyl aryl ester of methacrylic
reactant. acid.
P–16–0351 .............. 5/2/2016 7/31/2016 Solazyme, Inc ......... (G) Renewable oil (G) Glycerides, c14–18 and c16-c18 un-
source for fuels. saturated, from fermentation.
P–16–0351 .............. 5/2/2016 7/31/2016 Solazyme, Inc ......... (G) Feedstock for (G) Glycerides, c14–18 and c16-c18 un-
oleochemical in- saturated, from fermentation.
dustry.
P–16–0353 .............. 5/4/2016 8/2/2016 Gantrade Corp. ....... (S) Chain extender (S) Benzenamine, 4-[(4-amino-3-
and curative for chlorophenyl)methyl]-2-ethyl-.
use in polymer
manufacturing.
P–16–0354 .............. 5/5/2016 8/3/2016 CBI .......................... (G) Intermediate ..... (G) Esteramine.
P–16–0355 .............. 5/5/2016 8/3/2016 CBI .......................... (G) Intermediate ..... (G) Esteramine.
P–16–0356 .............. 5/5/2016 8/3/2016 CBI .......................... (G) Wellbore addi- (G) Quaternary ammonium salts.
tive.
P–16–0357 .............. 5/5/2016 8/3/2016 CBI .......................... (G) Wellbore addi- (G) Quaternary ammonium salts.
tive.
P–16–0358 .............. 5/5/2016 8/3/2016 CBI .......................... (S) Intermediate for (G) Alkylphenol.
further polymer
reaction.
P–16–0359 .............. 5/5/2016 8/3/2016 Dic International, (G) Pigment additive (G) Carbopolycycle-bis(diazonium),
mstockstill on DSK3G9T082PROD with NOTICES
USA, LLC. for industrial coat- dihalo-, chloride (1:2), reaction products
ings. with metal hydroxide, 4-
[(dioxoalkyl)amino]substituted benzene,
2-[(dioxoalkyl)amino]substituted benzene,
5-[(dioxoalkyl)amino]-2-hydroxy-sub-
stituted benzene and oxo-n-
phenylalkanamide.
VerDate Sep<11>2014 18:30 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00029 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/2.svg)
![45150 Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Projected end Manufacturer/
Case No. Date received date for EPA Use(s) Chemical identity
Importer
review
P–16–0359 .............. 5/5/2016 8/3/2016 Dic International (G) Pigment addi- (G) Carbopolycycle-bis(diazonium),
USA, LLC. tives for industrial dihalo-, chloride (1:2), reaction products
coatings. with metal hydroxide, 4-
[(dioxoalkyl)amino]substituted benzene,
2-[(dioxoalkyl)amino]substituted benzene,
5-[(dioxoalkyl)amino]-2-hydroxy-sub-
stituted benzene and oxo-n-
phenylalkanamide.
P–16–0360 .............. 5/6/2016 8/4/2016 Oleon Americas, Inc (G) Fuel additive ..... (S) Poly (oxy-1,2-ethanediyl), alpha- (1-
oxodocosyl)- omega- [(1-
oxodocosyl)oxy]-.
P–16–0361 .............. 5/12/2016 8/10/2016 American Process, (G) Plastic reinforce- (S) Pulp, cellulose, reaction products
Inc. ment. with lignin [nanocrystals].
P–16–0361 .............. 5/12/2016 8/10/2016 American Process, (G) Binders ............. (S) Pulp, cellulose, reaction products
Inc. with lignin [nanocrystals].
P–16–0361 .............. 5/12/2016 8/10/2016 American Process, (G) Viscosifying (S) Pulp, cellulose, reaction products
Inc. agent. with lignin [nanocrystals].
P–16–0362 .............. 5/12/2016 8/10/2016 American Process, (G) Binders ............. (S) Pulp, cellulose, reaction products
Inc. with lignin [nanofibrils].
P–16–0362 .............. 5/12/2016 8/10/2016 American Process, (G) Plastic reinforce- (S) Pulp, cellulose, reaction products
Inc. ment. with lignin [nanofibrils].
P–16–0362 .............. 5/12/2016 8/10/2016 American Process, (G) Viscosifying (S) Pulp, cellulose, reaction products
Inc. agent. with lignin [nanofibrils].
P–16–0363 .............. 5/10/2016 8/8/2016 CBI .......................... (G) Open, non-dis- (G) Blocked polyester polyurethane, neu-
persive. tralized.
P–16–0364 .............. 5/10/2016 8/8/2016 CBI .......................... (G) Intermediate (G) Nitrile-butadiene-acrylate
used completely terpolymers.
on site.
P–16–0365 .............. 5/16/2016 8/14/2016 Allnex USA, Inc ...... (S) Ultra violet cur- (G) Alkyl carbonate, polymer with, sub-
able coating resin. stituted alkanes and substituted
heteromonocycle, substituted alkyl acry-
late-blocked.
P–16–0366 .............. 5/11/2016 8/9/2016 CBI .......................... (G) Open, non-dis- (G) Blocked polyisocyanate.
persive.
P–16–0367 .............. 5/20/2016 8/18/2016 Allnex USA, Inc ...... (S) Ultra violet cur- (G) Substituted heteromonocylce, poly-
able coating resin. mer with substituted alkane and
ethoxylated alkaneâ¿ã¿â¿ã¿â¢ã¿â¿ã
¿â¿ã¿â¿ã¿â¿ã¿â¿, substituted hetero
monocycle substituted â¿ã¿â¿ã¿â¢ã¿â
¿ã¿â¿ã¿â¿ã¿â¿â¿ã¿â¿alkyl ester-â¿ã
¿â¿ã¿â¢ã¿â¿ã¿â¿ã¿â¿ã¿â¿â¿blocked.
P–16–0368 .............. 5/13/2016 8/11/2016 CBI .......................... (S) Adhesive coat- (G) Aromatic dicarboxylic acid, polymer
ing for carpet with adipic acid and alkanediol.
backing.
P–16–0369 .............. 5/13/2016 8/11/2016 Allnex USA, Inc ...... (S) Ultra violet cur- (G) Substituted heteromonocycle,
able coating resin. telomer with substituted
carbomonocycles, substituted alkyl ester.
P–16–0370 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Crosslinker for (G) Polysiloxane with functional groups.
adhesives and
coatings.
P–16–0371 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Wetting and dis- (G) Polyphosphoric acids polyether
persing additive. polyethene alkyl alkyl.
P–16–0372 .............. 5/13/2016 8/11/2016 CBI .......................... (G) Wetting and dis- (G) Polyphosphoric acids polyether alkyl
persing additive. polyethylene polymer.
P–16–0373 .............. 5/13/2016 8/11/2016 CBI .......................... (S) Ultra violet ab- (G) Tris(alkyloxyphenyl)triazine com-
sorber for plastic pounds.
articles.
P–16–0374 .............. 5/17/2016 8/15/2016 CBI .......................... (G) Oil additive ....... (G) Metal branched alkyl substituted
carbomonocycle complexes with sub-
stituted alkyl carbomonocycle.
mstockstill on DSK3G9T082PROD with NOTICES
P–16–0375 .............. 5/19/2016 8/17/2016 CBI .......................... (G) Binder for seal (G) Alkyl methacrylates, polymer with
application. olefines.
P–16–0376 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Photolithography (G) Hydroxystyrene resin.
P–16–0377 .............. 5/17/2016 8/15/2016 CBI .......................... (G) Film component (G) Polyester polyol.
P–16–0378 .............. 5/17/2016 8/15/2016 CBI .......................... (G) Film component (G) Polyester polyol.
P–16–0379 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Intermediate for (G) Vinyl functional
polymer synthesis. polymethylalkylpolymer.
VerDate Sep<11>2014 18:30 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00030 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/3.svg)
![Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices 45151
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Projected end Manufacturer/
Case No. Date received date for EPA Use(s) Chemical identity
Importer
review
P–16–0380 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-
polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
acetates (salts).
P–16–0381 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component of (G) Propanoic acid, 2-hydroxy-, compds.
electrocoat resin. with hydrolyzed bisphenol a-
epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
formates (salts).
P–16–0381 .............. 5/18/2016 8/16/2016 CBI .......................... (S) Anti-crater addi- (G) Propanoic acid, 2-hydroxy-, compds.
tive for automotive with hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
formates (salts).
P–16–0382 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-
polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates (salts).
P–16–0382 .............. 5/18/2016 8/16/2016 CBI .......................... (S) Anti-crater addi- (G) Formic acid, compds. with
tive for automotive hydrolyzed bisphenol a-epichlorohydrin-
electrocoat resin. polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates (salts).
P–16–0383 .............. 5/18/2016 8/16/2016 CBI .......................... (S) Anti-crater addi- (G) Formic acid, compds. with
tive for automotive hydrolyzed bisphenol a-epichlorohydrin-
electrocoat resin. polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
acetates (salts).
P–16–0383 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component in (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-
polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
mstockstill on DSK3G9T082PROD with NOTICES
(methylamino)ethanol reaction products
acetates (salts).
VerDate Sep<11>2014 18:30 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00031 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/4.svg)
![45152 Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016—Continued
Projected end Manufacturer/
Case No. Date received date for EPA Use(s) Chemical identity
Importer
review
P–16–0384 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component of (G) Propanoic acid, 2-hydroxy-, compds.
an electrocoat with hydrolyzed bisphenol a-
resin. epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
formates (salts).
P–16–0384 .............. 5/18/2016 8/16/2016 CBI .......................... (S) Anti-crater addi- (G) Propanoic acid, 2-hydroxy-, compds.
tive for automotive with hydrolyzed bisphenol a-
electrocoat resin. epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
formates (salts).
P–16–0385 .............. 5/18/2016 8/16/2016 CBI .......................... (G) Component of (G) Formic acid, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-
polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates (salts).
P–16–0385 .............. 5/18/2016 8/16/2016 CBI .......................... (S) Anti-crater addi- (G) Formic acid, compds. with
tive for automotive hydrolyzed bisphenol a-epichlorohydrin-
electrocoat resin. polyethylene glycol ether with bisphenol
a (2:1) polymer-n1-(1,3-
dimethylbutylidene)-n2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates (salts).
P–16–0386 .............. 5/20/2016 8/18/2016 CBI .......................... (S) Additive for (S) Hexanedioic acid, 1,6-bis(3,5,5-
motor oil formula- trimethylhexyl) ester.
tions and gear oil
lubricants.
P–16–0388 .............. 5/20/2016 8/18/2016 CBI .......................... (G) Hardener for (G) Aliphatic polyamines, polymers with
epoxy coating. bisphenol a and epichlorohydrin.
P–16–0389 .............. 5/23/2016 8/21/2016 CBI .......................... (G) Oil & gas ex- (G) Polymer of substituted acrylic acid,
traction. mercaptoethanol and bromohexane.
P–16–0390 .............. 5/27/2016 8/25/2016 CBI .......................... (S) Coating resin (G) Alkyl alkenoic acid alkyl ester poly-
used in anti-fog- mer with alkyl alkenoate, dialkyl
ging clear coat alkenamide, hydroxy-modified alkenoic
applied to auto- acid derivative, and sulfonic-modified
motive parts. alkenoic acid derivative.
P–16–0391 .............. 5/23/2016 8/21/2016 CBI .......................... (G) Stabilizer ........... (G) Polyester polyol polymer with ali-
phatic isocyanate and phenol derivates.
P–16–0392 .............. 5/25/2016 8/23/2016 CBI .......................... (G) Wax .................. (G) Modified vegetable oil.
P–16–0394 .............. 5/31/2016 8/29/2016 CBI .......................... (G) Adhesive ........... (G) Benzenedicarboxylic acid, polymer
with decanedioic acid and dodecanedioic
acid, ethanediol, hexanedioic acid,
hexanediol, alpha-hydro-omega-
hydroxypoly[oxy(methyl-1,2-ethanediyl)],
isobenzofurandione,1,1’-methylenebis[4-
isocyanatobenzene], phenol and
trimethylbicyclo hept-2-ene.
mstockstill on DSK3G9T082PROD with NOTICES
For the 28 NOCs received by EPA The EPA case number assigned to the submitter in the NOC; and the chemical
during this period, Table 3 provides the NOC; the date the NOC was received by identity.
following information (to the extent that EPA; the projected date of
such information is not claimed as CBI): commencement provided by the
VerDate Sep<11>2014 20:19 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00032 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/5.svg)
![Federal Register / Vol. 81, No. 133 / Tuesday, July 12, 2016 / Notices 45153
TABLE 2—NOCS RECEIVED FROM MAY 2, 2016 TO MAY 31, 2016
Projected end
Case No. Date received date of Chemical identity
commencement
P–89–1056 ................................. 5/9/2016 8/31/2005 (G) Polyurethane.
P–92–0303 ................................. 5/6/2016 6/23/1992 (S) Phenol, 2,4,6-tris[(dimethylamino)methyl]-, reaction products with
benzyl chloride.
P–99–0096 ................................. 5/6/2016 5/4/2016 (G) Amine-modified polyether acrylate.
P–13–0916 ................................. 5/10/2016 4/17/2016 (G) Polyurethane.
P–14–0076 ................................. 5/5/2016 11/18/2014 (G) Synthetic polyol esters.
P–14–0078 ................................. 5/5/2016 9/11/2014 (G) Synthetic polyol ester.
P–14–0079 ................................. 5/5/2016 6/26/2014 (G) Synthetic polyol esters.
P–14–0711 ................................. 5/10/2016 5/3/2016 (G) Polyurethane.
P–14–0855 ................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P–14–0856 ................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P–14–0857 ................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P–14–0858 ................................. 5/10/2016 4/18/2016 (G) Polyurethane.
P–15–0120 ................................. 5/11/2016 2/24/2016 (G) Substituted benzyl acrylate.
P–15–0276 ................................. 5/23/2016 5/2/2016 (G) Functionalized carbon nanotubes.
P–15–0303 ................................. 5/19/2016 5/17/2016 (S) Cellulose, carboxymethyl ether, sodium salt, polymer with
bis(isocyanatomethyl)benzene, 2,2-dimethoxyacetaldehyde, ethanedial,
2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 2-oxoacetic acid, 1h-1,2,4-tri-
azole-3,5-diamine and 1,3,5-triazine-2,4,6-triamine.
P–15–0747 ................................. 5/26/2016 5/13/2016 (G) Naturally-occurring minerals, reaction products with boron sodium
oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and
sodium silicate.
P–16–0056 ................................. 5/26/2016 5/5/2016 (G) Dialkyl fattyalkylamino propanamide alkylamine acetates.
P–16–0124 ................................. 5/13/2016 5/1/2016 (G) Substituted alkanoic acid-, salts with substituted alkanol-blocked
haloalkyl heteromonocycle substituted carbomonocycle polymer alkyl
alkanoate substituted carbomonocycle-trialkylcarbomonocycle-alkyl
imine reaction products.
P–16–0126 ................................. 5/13/2016 5/1/2016 (G) Substituted carbomonocycle, polymer with substituted
heteromonocycle, reaction products with substituted amine, substituted
amine and substituted alkanol, alkylalkanoates substituted
carbomonocycle.
P–16–0135 ................................. 5/2/2016 4/14/2016 (G) Polyesters, fatty alkyl amindes terminated.
P–16–0141 ................................. 5/4/2016 5/1/2016 (G) Polyalkyl methacrylate copolymer.
P–16–0190 ................................. 5/20/2016 4/25/2016 (G) Aryl polyolefin.
P–16–0210 ................................. 5/23/2016 5/11/2016 (G) Alkanepolycarboxylic acids, polymer with alkanepolyols,
benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and
polyether polyols, benzenedicarboxylic acid derivative and
caprolactone.
P–16–0210 ................................. 5/23/2016 5/12/2016 (G) Alkanepolycarboxylic acids, polymer with alkanepolyols,
benzenedicarboxylic acid, methylenebis[isocyantobenzene], mono- and
polyether polyols, benzenedicarboxylic acid derivative and
caprolactone.
P–16–0211 ................................. 5/23/2016 5/13/2016 (G) Polymer of alkyl acrylate, caprolactone,
methylenebis[isocyanatobenzene], alkyl methacrylates, polyether polyol,
alkanepolycarboxylic acid, substituted methacrylate and alkanepolyol.
P–16–0212 ................................. 5/23/2016 5/17/2016 (G) Polymer of alkanepolyols, methylenebis[isocyantobenzene],
polyether polyol, alkyl methacrylates and acrylate, methacrylic acid,
substitued methacrylic acid and alkanepolycarboxylic acid.
P–16–0213 ................................. 5/23/2016 5/10/2016 (G) Polymer of substituted benzenes, alkanepolyols,
alkanepolycarboxylic acids, methylenebis[isocyanatobenzene], polyether
polyol, neopentyl glycol and a substituted glycol.
P–16–0214 ................................. 5/23/2016 5/10/2016 (G) Polyether polyols, polymers with substituted benzenes,
methylenebis[isocyanatobenzene], alkanepolyols, caprolactone and a
substituted glycol.
Authority: 15 U.S.C. 2601 et seq. ENVIRONMENTAL PROTECTION SUMMARY: In accordance with the
Dated: July 5, 2016. AGENCY Federal Insecticide, Fungicide, and
Pamela S. Myrick, Rodenticide Act (FIFRA), EPA is issuing
[EPA–HQ–OPP–2016–0345; FRL–9948–04] a notice of receipt of requests by
Acting Director, Information Management
mstockstill on DSK3G9T082PROD with NOTICES
Division, Office of Pollution Prevention and Pesticide Maintenance Fee: Notice of registrants to voluntarily cancel certain
Toxics. Receipt of Requests to Voluntarily pesticide registrations. EPA intends to
[FR Doc. 2016–16448 Filed 7–11–16; 8:45 am] Cancel Certain Pesticide Registrations grant these requests at the close of the
comment period for this announcement
BILLING CODE 6560–50–P
AGENCY: Environmental Protection unless the Agency receives substantive
Agency (EPA). comments within the comment period
ACTION: Notice. that would merit its further review of
VerDate Sep<11>2014 18:30 Jul 11, 2016 Jkt 238001 PO 00000 Frm 00033 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1](https://thefederalregister.org/doc/81_FR_45281/page/6.svg)
Document Created: 2016-07-12 01:58:59
Document Modified: 2016-07-12 01:58:59
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before August 11, 2016. | |
| Contact | For technical information contact: Jim Rahai, IMD (7407M) Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
| FR Citation | 81 FR 45148 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR