81 FR 48744 - Pacific Fishery Management Council; Public Meeting
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric Administration Federal Register Volume 81, Issue 143 (July 26, 2016)
National Oceanic and Atmospheric Administration
Federal Register Volume 81, Issue 143 (July 26, 2016)
| Page Range | 48744-48744 | |
| FR Document | 2016-17536 |
[Federal Register Volume 81, Number 143 (Tuesday, July 26, 2016)] [Notices] [Page 48744] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-17536] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XE758 Pacific Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of a public meeting. ----------------------------------------------------------------------- SUMMARY: The Pacific Fishery Management Council's (Pacific Council) Ad hoc Sacramento River Winter Chinook Workgroup (SRWCW) will hold a meeting, which is open to the public, to discuss progress on development of potential harvest control rule options. DATES: The meeting will begin at 1 p.m. on Tuesday, August 16, 2016, and end at 5 p.m. on Wednesday, August 17, 2016, or until business for the day is completed. ADDRESSES: The meeting will be held at the National Marine Fisheries Service, Southwest Fisheries Science Center, Large Conference Room, 110 Shaffer Road, Santa Cruz, CA 95060. Council address: Pacific Council, 7700 NE Ambassador Place, Suite 101, Portland, Oregon 97220-1384. FOR FURTHER INFORMATION CONTACT: Mr. Mike Burner, Pacific Council, 503- 820-2414. SUPPLEMENTARY INFORMATION: Agenda The SRWCW will discuss progress on the development of new predictors of Sacramento River winter Chinook abundance, the development of alternative harvest control rules, and methods for evaluating the performance of alternative control rules. The SRWCW will also prepare a report for the Council's September 2016 meeting and discuss future meeting plans. Although non-emergency issues not contained in the meeting agenda may be discussed, those issues may not be the subject of formal action during these meetings. Action will be restricted to those issues specifically listed in this document and any issues arising after publication of this document that require emergency action under section 305(c) of the Magnuson-Stevens Fishery Conservation and Management Act, provided the public has been notified of the intent to take final action to address the emergency. Special Accommodations The meetings are physically accessible to people with disabilities. Requests for sign language interpretation or other auxiliary aids should be directed to Mr. Kris Kleinschmidt, at 503-820-2280, extension 425, at least five days prior to the meeting date. Authority: 16 U.S.C. 1801 et seq. Dated: July 20, 2016. Tracey L. Thompson, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2016-17536 Filed 7-25-16; 8:45 am] BILLING CODE 3510-22-P
![48744 Federal Register / Vol. 81, No. 143 / Tuesday, July 26, 2016 / Notices
and (b) a seal; (3) all assembled baskets 16 a vertical rotational axis; (2) are top development of potential harvest
designed for use in large residential washers loading; 22 (3) have a drive train consisting, control rule options.
which incorporate, at a minimum: (a) A side inter alia, of (a) a permanent split capacitor
wrapper; 17 (b) a base; and (c) a drive hub; 18 (PSC) motor,23 (b) a belt drive,24 and (c) a flat DATES: The meeting will begin at 1 p.m.
and (4) any combination of the foregoing wrap spring clutch.25 on Tuesday, August 16, 2016, and end
parts or subassemblies. Also excluded from the scope are at 5 p.m. on Wednesday, August 17,
Excluded from the scope are stacked automatic clothes washing machines that
washer-dryers and commercial washers. The
2016, or until business for the day is
meet all of the following conditions: (1) Have
term ‘‘stacked washer-dryers’’ denotes a horizontal rotational axis; (2) are front completed.
distinct washing and drying machines that loading; 26 and (3) have a drive train
are built on a unitary frame and share a ADDRESSES: The meeting will be held at
consisting, inter alia, of (a) a controlled
common console that controls both the induction motor (CIM),27 and (b) a belt drive. the National Marine Fisheries Service,
washer and the dryer. The term ‘‘commercial Also excluded from the scope are Southwest Fisheries Science Center,
washer’’ denotes an automatic clothes automatic clothes washing machines that Large Conference Room, 110 Shaffer
washing machine designed for the ‘‘pay per meet all of the following conditions: (1) Have Road, Santa Cruz, CA 95060.
use’’ segment meeting either of the following a horizontal rotational axis; (2) are front
two definitions: loading; and (3) have cabinet width Council address: Pacific Council,
(1) (a) It contains payment system (measured from its widest point) of more 7700 NE Ambassador Place, Suite 101,
electronics; 19 (b) it is configured with an than 28.5 inches (72.39 cm). Portland, Oregon 97220–1384.
externally mounted steel frame at least six The products subject to this investigation
inches high that is designed to house a coin/ are currently classifiable under subheadings
FOR FURTHER INFORMATION CONTACT: Mr.
token operated payment system (whether or 8450.20.0040 and 8450.20.0080 of the Mike Burner, Pacific Council, 503–820–
not the actual coin/token operated payment Harmonized Tariff Schedule of the United 2414.
system is installed at the time of States (HTSUS). Products subject to this
importation); (c) it contains a push button SUPPLEMENTARY INFORMATION:
investigation may also enter under HTSUS
user interface with a maximum of six subheadings 8450.11.0040, 8450.11.0080,
manually selectable wash cycle settings, with Agenda
8450.90.2000, and 8450.90.6000. Although
no ability of the end user to otherwise modify the HTSUS subheadings are provided for
water temperature, water level, or spin speed
The SRWCW will discuss progress on
convenience and customs purposes, the the development of new predictors of
for a selected wash cycle setting; and (d) the written description of the merchandise
console containing the user interface is made Sacramento River winter Chinook
subject to this investigation is dispositive.
of steel and is assembled with security abundance, the development of
fasteners; 20 or [FR Doc. 2016–17680 Filed 7–25–16; 8:45 am]
alternative harvest control rules, and
(2) (a) it contains payment system BILLING CODE 3510–DS–P
methods for evaluating the performance
electronics; (b) the payment system of alternative control rules. The
electronics are enabled (whether or not the
payment acceptance device has been DEPARTMENT OF COMMERCE SRWCW will also prepare a report for
installed at the time of importation) such the Council’s September 2016 meeting
that, in normal operation,21 the unit cannot National Oceanic and Atmospheric and discuss future meeting plans.
begin a wash cycle without first receiving a Administration Although non-emergency issues not
signal from a bona fide payment acceptance
device such as an electronic credit card contained in the meeting agenda may be
RIN 0648–XE758
reader; (c) it contains a push button user discussed, those issues may not be the
interface with a maximum of six manually Pacific Fishery Management Council; subject of formal action during these
selectable wash cycle settings, with no ability Public Meeting meetings. Action will be restricted to
of the end user to otherwise modify water those issues specifically listed in this
temperature, water level, or spin speed for a AGENCY: National Marine Fisheries document and any issues arising after
selected wash cycle setting; and (d) the Service (NMFS), National Oceanic and publication of this document that
console containing the user interface is made Atmospheric Administration (NOAA),
of steel and is assembled with security require emergency action under section
Commerce. 305(c) of the Magnuson-Stevens Fishery
fasteners.
Also excluded from the scope are ACTION: Notice of a public meeting. Conservation and Management Act,
automatic clothes washing machines that provided the public has been notified of
meet all of the following conditions: (1) Have SUMMARY: The Pacific Fishery
the intent to take final action to address
Management Council’s (Pacific Council)
Ad hoc Sacramento River Winter the emergency.
16 A ‘‘basket’’ (sometimes referred to as a ‘‘drum’’)
is the part of the washer designed to hold clothing Chinook Workgroup (SRWCW) will Special Accommodations
or other fabrics. hold a meeting, which is open to the
17 A ‘‘side wrapper’’ is the cylindrical part of the
public, to discuss progress on The meetings are physically
basket that actually holds the clothing or other accessible to people with disabilities.
fabrics.
18 A ‘‘drive hub’’ is the hub at the center of the 22 ‘‘Top loading’’ means that access to the basket Requests for sign language
base that bears the load from the motor. is from the top of the washer. interpretation or other auxiliary aids
23 A ‘‘PSC motor’’ is an asynchronous, alternating
19 ‘‘Payment system electronics’’ denotes a circuit should be directed to Mr. Kris
board designed to receive signals from a payment current (AC), single phase induction motor that
employs split phase capacitor technology.
Kleinschmidt, at 503–820–2280,
acceptance device and to display payment amount,
selected settings, and cycle status. Such electronics 24 A ‘‘belt drive’’ refers to a drive system that extension 425, at least five days prior to
also capture cycles and payment history and includes a belt and pulleys. the meeting date.
provide for transmission to a reader. 25 A ‘‘flat wrap spring clutch’’ is a flat metal
srobinson on DSK5SPTVN1PROD with NOTICES
20 A ‘‘security fastener’’ is a screw with a non- spring that, when engaged, links abutted cylindrical Authority: 16 U.S.C. 1801 et seq.
standard head that requires a non-standard driver. pieces on the input shaft with the end of the Dated: July 20, 2016.
Examples include those with a pin in the center of concentric output shaft that connects to the drive
the head as a ‘‘center pin reject’’ feature to prevent hub. Tracey L. Thompson,
standard Allen wrenches or Torx drivers from 26 ‘‘Front loading’’ means that access to the basket
Acting Director, Office of Sustainable
working. is from the front of the washer. Fisheries, National Marine Fisheries Service.
21 ‘‘Normal operation’’ refers to the operating 27 A ‘‘controlled induction motor’’ is an
[FR Doc. 2016–17536 Filed 7–25–16; 8:45 am]
mode(s) available to end users (i.e., not a mode asynchronous, alternating current (AC), polyphase
designed for testing or repair by a technician). induction motor. BILLING CODE 3510–22–P
VerDate Sep<11>2014 20:28 Jul 25, 2016 Jkt 238001 PO 00000 Frm 00009 Fmt 4703 Sfmt 9990 E:\FR\FM\26JYN1.SGM 26JYN1](https://thefederalregister.org/doc/81_FR_48887/page/1.svg)
Document Created: 2018-02-08 08:00:56
Document Modified: 2018-02-08 08:00:56
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice of a public meeting. | |
| Dates | The meeting will begin at 1 p.m. on Tuesday, August 16, 2016, and end at 5 p.m. on Wednesday, August 17, 2016, or until business for the day is completed. | |
| Contact | Mr. Mike Burner, Pacific Council, 503- 820-2414. | |
| FR Citation | 81 FR 48744 | |
| RIN Number | 0648-XE75 |
2024 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR