81 FR 49976 - Certain New Chemicals; Receipt and Status Information for June 2016
ENVIRONMENTAL PROTECTION AGENCY Federal Register Volume 81, Issue 146 (July 29, 2016)
Federal Register Volume 81, Issue 146 (July 29, 2016)
| Page Range | 49976-49981 | |
| FR Document | 2016-18015 |
[Federal Register Volume 81, Number 146 (Friday, July 29, 2016)] [Notices] [Pages 49976-49981] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-18015] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0025; FRL-9949-63] Certain New Chemicals; Receipt and Status Information for June 2016 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a Premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from June 1, 2016 to June 30, 2016. DATES: Comments identified by the specific case number provided in this document, must be received on or before August 29, 2016. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-2016-0025, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 202-564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from June 1, 2016 to June 30, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. [[Page 49977]] IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 60 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From June 1, 2016 to June 30, 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Case No. Received date notice end Manufacturer importer Use Chemical date -------------------------------------------------------------------------------------------------------------------------------------------------------- P-16-0273............................ 6/13/2016 9/11/2016 CBI..................... (G) Ingredient in metal (G) Alkyl heteromonocycle, working fluids. polymer with heteromonocycle, carboxyalkyl alkyl ether. P-16-0345............................ 6/13/2016 9/11/2016 CBI..................... (G) Processing aid...... (G) Acrylamide, polymer with methacrylic acid derivatives. P-16-0377............................ 6/2/2016 8/31/2016 CBI..................... (G) Film component...... (G) Polyester polyol. P-16-0380............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compounds electrocoat resin. (compds.) with hydrolyzed bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1,3- dimethylbutylidene)amino]- ethyl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). P-16-0380............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). P-16-0381............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Propanoic acid, 2-hydroxy- electrocoat resin. , compds. with hydrolyzed bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1,3- dimethylbutylidene)amino]- ethyl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0381............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy- for automotive , compds. with hydrolyzed electrocoat resin. bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]- ethyl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0382............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates(salts). P-16-0382............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates (salts). P-16-0383............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products acetates (salts). [[Page 49978]] P-16-0384............................ 6/2/2016 8/31/2016 CBI..................... (G) Component of (G) Propanoic acid, 2-hydroxy- electrocoat resin. , compds. with hydrolyzed bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1,3- dimethylbutylidene)amino]- ethyl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0384............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy- for automotive , compds. with hydrolyzed electrocoat resin. bisphenol a-epichlorohydrin- polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1,3- dimethylbutylidene)amino]- ethyl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products formates (salts). P-16-0385............................ 6/2/2016 8/31/2016 CBI..................... (G) Component in (G) Formic acid, compds. with electrocoat resin. hydrolyzed bisphenol a- epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates(salts). P-16-0385............................ 6/2/2016 8/31/2016 CBI..................... (S) Anti-Crater additive (G) Formic acid, compds. with for automotive hydrolyzed bisphenol a- electrocoat resin. epichlorohydrin-polyethylene glycol ether with bisphenol a (2:1) polymer-N1-(1,3- dimethylbutylidene)-N2-[2- [(1, 3- dimethylbutylidene)amino]eth yl]-1,2-ethanediamine- dialdehyde-2- (methylamino)ethanol reaction products sulfamates(salts). P-16-0394............................ 6/7/2016 9/5/2016 CBI..................... (G) Adhesive............ (G) Benzenedicarboxylic acid, polymer with decanedioic acid and dodecanedioic acid, ethanediol, hexanedioic acid, hexanediol, alpha- hydro-omega- hydroxypoly[oxy(methyl-1,2- ethanediyl)], isobenzofurandione,1,1'- methylenebis[4- isocyanatobenzene], phenol and trimethylbicyclo hept-2- ene. P-16-0395............................ 6/2/2016 8/31/2016 CBI..................... (S) Polymeric (G) Methacrylic acid, polymer intermediate for the with alkyl methacrylates and production of acrylic substituted acrylamide, polymers for industrial ammonium salt. coatings. P-16-0396............................ 6/2/2016 8/31/2016 CBI..................... (G) Specialty chemical (G) Alkylaminium hydroxide. for processing additive. P-16-0398............................ 6/6/2016 9/4/2016 CBI..................... (G) Corrosion inhibitor. (G) Di-ammonium di- carboxylate. P-16-0399............................ 6/17/2016 9/15/2016 Tryeco Llc.............. (S) Agricultural soil (S) Starch, polymer with 2- amendment for filed propenoic acid, potassium crops seed coating and salt. oxidized. turf. P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Use in cured (S) Alkanes, C11 16-branched coatings. and linear. P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Agrochemical........ (S) Alkanes, C11 16-branched and linear. P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Metalworking fluid (S) Alkanes, C11 16-branched use. and linear. P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Use in cleaning (S) Alkanes, C11 16-branched fluids. and linear. P-16-0400............................ 6/6/2016 9/4/2016 Shell Chemical LP....... (S) Chemical............ (S) Alkanes, C11 16-branched intermediate............ and linear. P-16-0402............................ 6/7/2016 9/5/2016 CBI..................... (S) Flotation additive (G) Propanediamine, for use in mineral [(isoalkyloxy)propyl] processing. derivs., salts. P-16-0403............................ 6/15/2016 9/13/2016 CBI..................... (G) Open non dispersive (G) Heteropolycyclic use. carboxylic acid, polymer with 2-ethyl-2- (hydroxymethyl)-1,3- propanediol and 4- substitutedbenzene, substituted carbomonocycle- and alkyl-substituted carbomonocycle-blocked. [[Page 49979]] P-16-0404............................ 6/8/2016 9/6/2016 CBI..................... (G) A colorant for (G) Alkyl ester, 2-({4-[2- dyeing various (trisubstituted phenyl)azo]- synthetic fibers and 5-acetamido-2- fabrics open, non- substitutedphenyl{time} (sub dispersive use. stituted alkoxy)amino). P-16-0406............................ 6/9/2016 9/7/2016 CBI..................... (G) Coating............. (G) Functionalized polyimide. P-16-0407............................ 6/9/2016 9/7/2016 CBI..................... (G) Coating............. (G) Functionalized polyamide. P-16-0408............................ 6/9/2016 9/7/2016 CBI..................... (G) A Colorant for (G) 3-pyridinecarbonitrile, dyeing various 1,2-dihydro-trisubstituted-5- synthetic fibers and [2-(disubstituted fabrics open non- phenyl)azo]-2-oxo. dispersive use. P-16-0409............................ 6/15/2016 9/13/2016 CBI..................... (G) Chemical (G) Alkylphenol. intermediate for the synthesis of another substance. P-16-0410............................ 6/14/2016 9/12/2016 CBI..................... (G) Automotive engine (G) Silicophosphonate--sodium fluid additive. silicate. P-16-0411............................ 6/13/2016 9/11/2016 CBI..................... (G) Crosslinking agent.. (G) Substituted polyalkylene polycarbomonocyclic ester, polymer with polyalkylene glycol, alkoxyalkanol blocked. P-16-0412............................ 6/13/2016 9/11/2016 Cardolite Corporation... (G) Epoxy coating....... (G) Cashew, nutshell liquid, polymer with amine and formaldehyde. P-16-0413............................ 6/13/2016 9/11/2016 Siltech Llc............. (S) Anti-fingerprint (S) Siloxanes and silicones, material for a metal di-me, 3-hydroxypropyl me, coating application. me 3,3,4,4,5,5,6,6,6- nonafluorohexyl. P-16-0415............................ 6/17/2016 9/15/2016 CBI..................... (G) Coating for oil and (G) Polyurethane. gas industry. P-16-0417............................ 6/16/2016 9/14/2016 CBI..................... (G) Adhesive for open, (G) Isocyanate terminated non-descriptive use. polyurethane resin. P-16-0418............................ 6/15/2016 9/13/2016 CBI..................... (G) A colorant for (G) 6-(disubstituted-phenyl dyeing various azo)-4,7-disubstituted- synthetic fibers and quinolinepropanoic acid, fabrics open, non- alkyl ester. dispersive use. P-16-0419............................ 6/15/2016 9/13/2016 CBI..................... (G) Use as intermediate. (G) N-alkyl- dialkylpiperidine. P-16-0420............................ 6/21/2016 9/19/2016 CBI..................... (S) The notified (G) Dimethyl cyclohexenyl substance will be used propanol. as a fragrance ingredient being blended (mixed) with other fragrance ingredients to make fragrance oils that will be sold to industrial and commercial customers for their incorporation into soaps, detergents, cleaners and other similar household and consumer products. P-16-0421............................ 6/16/2016 9/14/2016 Guardian Industries Corp (S) Additive to (S) Flue dust, glass facilitate melting of manufacturing sand during manufacture desulfurizationdefinition: of glass. The dust produced from the flue gas exhaust cleaning of a glass manufacturing process using carbonate containing substances. it consists primarily of na2so4, na2co3, and na4(so4)(co3). P-16-0422............................ 6/21/2016 9/19/2016 CBI..................... (G) Additive for (S) 1,2- polymers. cyclohexanedicarboxylic acid, 1-(phenylmethyl) ester, ester with 2,2,4- trimethyl-1,3-pentanediol mono(2-methylpropanoate). P-16-0423............................ 6/17/2016 9/15/2016 CBI..................... (G) Intermediate........ (G) Tetraalkylpiperidinium halide. P-16-0424............................ 6/17/2016 9/15/2016 CBI..................... (G) Directing agent..... (G) Tetraalkylpiperidinium hydroxide. [[Page 49980]] P-16-0425............................ 6/22/2016 9/20/2016 CBI..................... (G) A chemical reactant (G) Amino-silane. used in manufacturing a polymer. P-16-0428............................ 6/20/2016 9/18/2016 Cardolite Corporation... (S) Industrial.......... (G) Phenol, formaldehyde and amine. P-16-0429............................ 6/20/2016 9/18/2016 CBI..................... (G) Universal tint paste (G) Endcapped polysiloxane. resin having high solids. P-16-0430............................ 6/21/2016 9/19/2016 CBI..................... (G) Filler.............. (S) Pentanedioic acid, 2- methyl-. P-16-0432............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0433............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0434............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0435............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0436............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0437............................ 6/22/2016 9/20/2016 CBI..................... (S) Additive for (G) Fatty acid amidoamine flotation products used acetates. in ore processing. P-16-0441............................ 6/23/2016 9/21/2016 CBI..................... (G) Oilfield additive... (G) Formaldehyde, reaction products with amine- alkylamine reaction products ether amine derivs. residues. P-16-0446............................ 6/24/2016 9/22/2016 Allnex USA Inc.......... (S) Resin in (G) Fatty acids, reaction architectural primer products with alkylamine, coatings. polymers with substituted carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate, lactates (salts). P-16-0447............................ 6/24/2016 9/22/2016 CBI..................... (G) Additive for (G) Alkyl alkenoate, dialkyl coatings. alkanediyl, polymer with alkyl alkenoate, substituted carbomonocycle, alkyl alkenoate and heteromonocycle alkyl alkenoate, diazene bis alkyl heteromonocycle initiated. P-16-0448............................ 6/27/2016 9/25/2016 CBI..................... (G) Oil additive........ (G) Metal salts branched alkyl substituted carbomonocycle with substituted alkyl carbomonocycle complexes. P-16-0449............................ 6/27/2016 9/25/2016 CBI..................... (S) Use per FFDCA (S) 2,7-decadienal, (2e,7z)-. cosmetics. P-16-0449............................ 6/27/2016 9/25/2016 CBI..................... (S) Use per TSCA (S) 2,7-decadienal, (2e,7z)-. fragrance uses scented papers detergents candles etc. P-16-0453............................ 6/29/2016 9/27/2016 Miwon North America, (S) Resin for industrial (G) Polyester acrylate. Inc.. coating. P-16-0454............................ 6/30/2016 9/28/2016 CBI..................... (G) Material for highly (G) Trisubstituted alkenol. dispersive use in consumer products. -------------------------------------------------------------------------------------------------------------------------------------------------------- For the 1 TME received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity. Table 2--TME Received From June 1, 2016 to June 30, 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Case No. Received date notice end Manufacter importer Use Chemical date -------------------------------------------------------------------------------------------------------------------------------------------------------- T-16-0017............................ 5/25/2016 7/9/2016 CBI..................... (G) Wax................. (G) Modified vegetable oil. -------------------------------------------------------------------------------------------------------------------------------------------------------- [[Page 49981]] For the 23 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 3--NOCs Received From June 1, 2016 to June 30, 2016 ---------------------------------------------------------------------------------------------------------------- Commencement Case No. Received date date Chemical ---------------------------------------------------------------------------------------------------------------- J-14-0001............................... 6/7/2016 3/13/2014 (G) Saccharomyces cerevisiae, modified. P-01-0309............................... 6/17/2016 6/1/2016 (S) Undecanedioic acid, compd. with 2- (2-aminoethoxy)ethanol. P-12-0121............................... 6/23/2016 5/25/2016 (S) Acetic acid, 1, 1'-anhydride, reaction products with borax and hydrogen peroxide. P-13-0930............................... 6/13/2016 5/24/2016 (G) Substituted phenol. P-14-0478............................... 6/23/2016 4/8/2016 (S) Carbonic acid, dimethyl ester, polymer with 1,4-diisocyanatobenzene, 1,6-hexanediol and 1,5-pentanediol. P-14-0860............................... 6/9/2016 5/9/2016 (G) Benzophenonetetracarboxylic dianhydride-methylenediphenylene isocyanate-toluene diisocyanate copolymer. P-15-0121............................... 6/7/2016 6/2/2016 (S) Formaldehyde, polymer with 2- aminocyclopentanemethanamine, 1,4- butanediamine, 1,2- cyclohexanediamine, 1,6- hexanediamine, hexahydro-1h-azepine and 2-methyl-1,5,-pentanediamine. P-15-0703............................... 6/15/2016 5/28/2016 (S) 2-propenoic acid, 2-methyl-, 2- (diethylamino)ethyl ester, polymer with butyl 2-propenoate and methyl 2- methyl-2-propenoate, compd. with methyl 4-methylbenzenesulfonate. P-16-0022............................... 6/3/2016 6/3/2016 (S) C10-C20 neo fatty acids. P-16-0101............................... 6/9/2016 6/8/2016 (G) Disubstituted benzene alkanal. P-16-0159............................... 6/9/2016 3/31/2016 (G) Substituted polyaromatic sodium dicarboxylate. P-16-0173............................... 6/23/2016 6/6/2016 (G) Aminoalkyl alaninate sodium salt (1:1), polymer with alkyldiol, dialkyl-alkanediol, alkyldioic acid, alkyldiol, polyol, cycloaliphatic diisocyanate, polyalkylene glycol mono-alkyl ether-blocked. P-16-0200............................... 6/14/2016 6/7/2016 (S) 1-propanone, 1-[1,1'-biphenyl]-4- yl-2-methyl-2-(4-morpholinyl)- P-16-0201............................... 6/6/2016 5/22/2016 (S) Oxirane, 2-methyl-, polymer with alpha-hydro-omega-hydroxy- poly[oxy(methyl-1,2-ethanediyl)], 5- isocyanato-1-(isocyanatomethyl)-1,3,3- trimethyl cyclohexane, oxirane and 2- [[3- (triethoxysilyl)propoxy]methyl]oxiran e, poly ethylenepolypropylene glycol mono-bu ether monoether with propylene oxide-2-[[3-(tri ethoxysilyl)propoxy]methyl] oxirane polymer- and polypropylene glycol mono-bu ether-blocked. P-16-0203............................... 6/2/2016 5/22/2016 (G) Pentanedioic acid, compd. with polyalkylpolyamine. P-16-0208............................... 6/6/2016 5/23/2016 (S) Carbon, calcination products with sulfur. P-16-0222............................... 6/27/2016 6/26/2016 (G) Alkanedioic acid, polymer with substituted heteromonocycle, [acirc] -hydro- [atilde][iquest][acirc]- hydroxypoly(oxy-1,2-ethanediyl) ether with substituted alkanediol and substituted. bis[carbomonocycle], alkanoate. P-16-0223............................... 6/10/2016 6/2/2016 (G) Wax. P-16-0227............................... 6/10/2016 6/8/2016 (G) Cashew nutshell liquid, polymer with diisocyanatoalkane, substituted- polyoxyalkyldiol, hydroxy-terminated .polybutadiene and 4,4'-(1- methylethylidene)bis[2-(2-propen-1- yl)phenol]. P-16-0228............................... 6/21/2016 6/6/2016 (G) Derivative of a glycerol, alkanoic acid and mixed fatty acids polymer. P-16-0235............................... 6/6/2016 5/31/2016 (G) Polymeric methylene diphenyldiisocyanate, polymer with oxyalkyl diol, methacrylate blocked. P-16-0250............................... 6/24/2016 6/24/2016 (G) Substituted carbomonocycle, polymer with substituted alkanediol, alkanedioic acid, alkanediol, substituted alkanoic acid and substituted carbomonocycle, compd. with substituted alkane. P-16-0267............................... 6/22/2016 6/19/2016 (G) Fatty acids, reaction products with alkylamine, polymers with substituted carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate, lactates (salts). ---------------------------------------------------------------------------------------------------------------- Authority: 15 U.S.C. 2601 et seq. Dated: July 25, 2016. Megan Carroll, Acting Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2016-18015 Filed 7-28-16; 8:45 am] BILLING CODE 6560-50-P
![49976 Federal Register / Vol. 81, No. 146 / Friday, July 29, 2016 / Notices
emissions certification and in-use ADDRESSES: Submit your comments, CD–ROM the specific information that
testing [EPA ICR No. 0783.62, OMB identified by docket identification (ID) is claimed as CBI. In addition to one
Control No. 2060–0104]. number EPA–HQ–OPPT–2016–2016– complete version of the comment that
Form Numbers: 0025, and the specific PMN number or includes information claimed as CBI, a
5900–300 Voluntary Emission Recall TME number for the chemical related to copy of the comment that does not
Report your comment, by one of the following contain the information claimed as CBI
5900–301 Emission Defect Information methods: must be submitted for inclusion in the
Report • Federal eRulemaking Portal: http:// public docket. Information so marked
5900–392 Manufacturer Request for www.regulations.gov. Follow the online will not be disclosed except in
Pre-Approval of Using Certified instructions for submitting comments. accordance with procedures set forth in
Data In-Lieu of New Tests Do not submit electronically any 40 CFR part 2.
5900–394 Manufacturer Actual Model information you consider to be 2. Tips for preparing your comments.
Year Production Volume Reporting Confidential Business Information (CBI) When preparing and submitting your
Form or other information whose disclosure is comments, see the commenting tips at
5900–395 Highway Motorcycle—Test restricted by statute. http://www.epa.gov/dockets/
Vehicle Information • Mail: Document Control Office comments.html.
Respondents/affected entities: Entities (7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental II. What action is the agency taking?
potentially affected by this action are
on-highway motorcycle manufacturers Protection Agency, 1200 Pennsylvania This document provides receipt and
and importers. Ave. NW., Washington, DC 20460–0001. status reports, which cover the period
Respondent’s obligation to respond: • Hand Delivery: To make special from June 1, 2016 to June 30, 2016, and
Mandatory (40 CFR 86.416–80). arrangements for hand delivery or consists of the PMNs and TMEs both
Estimated number of respondents: 74 delivery of boxed information, please pending and/or expired, and the NOCs
(total). follow the instructions at http:// to manufacture a new chemical that the
Frequency of response: Quarterly and www.epa.gov/dockets/contacts.html. Agency has received under TSCA
annually. Additional instructions on section 5 during this time period.
Total estimated burden: 3,594 hours commenting or visiting the docket,
(per year). Burden is defined at 5 CFR along with more information about III. What is the agency’s authority for
1320.03(b). dockets generally, is available at http:// taking this action?
Total estimated cost: $433,598 (per www.epa.gov/dockets. Under TSCA, 15 U.S.C. 2601 et seq.,
year), includes $113,834 annualized FOR FURTHER INFORMATION CONTACT: For EPA classifies a chemical substance as
capital and startup costs, $151,150 technical information contact: Jim either an ‘‘existing’’ chemical or a
operation & maintenance costs, and Rahai, IMD 7407M, Office of Pollution ‘‘new’’ chemical. Any chemical
$168,614 in labor costs. Prevention and Toxics, Environmental substance that is not on EPA’s TSCA
Protection Agency, 1200 Pennsylvania Inventory is classified as a ‘‘new
Courtney Kerwin,
Ave. NW., Washington, DC 20460–0001; chemical,’’ while those that are on the
Director, Regulatory Support Division. telephone number: 202–564–8593; TSCA Inventory are classified as an
[FR Doc. 2016–17944 Filed 7–28–16; 8:45 am] email address: rahai.jim@epa.gov. ‘‘existing chemical.’’ For more
BILLING CODE 6560–50–P For general information contact: The information about the TSCA Inventory
TSCA-Hotline, ABVI-Goodwill, 422 go to: http://www.epa.gov/opptintr/
South Clinton Ave., Rochester, NY newchems/pubs/inventory.htm.
ENVIRONMENTAL PROTECTION 14620; telephone number: (202) 554–
AGENCY Anyone who plans to manufacture or
1404; email address: TSCA- import a new chemical substance for a
[EPA–HQ–OPPT–2016–0025; FRL–9949–63] Hotline@epa.gov. non-exempt commercial purpose is
SUPPLEMENTARY INFORMATION: required by TSCA section 5 to provide
Certain New Chemicals; Receipt and EPA with a PMN, before initiating the
Status Information for June 2016 I. General Information
activity. Section 5(h)(1) of TSCA
AGENCY: Environmental Protection A. Does this action apply to me? authorizes EPA to allow persons, upon
Agency (EPA). This action is directed to the public application, to manufacture (includes
ACTION: Notice. in general. As such, the Agency has not import) or process a new chemical
attempted to describe the specific substance, or a chemical substance
SUMMARY: EPA is required under the entities that this action may apply to. subject to a significant new use rule
Toxic Substances Control Act (TSCA) to Although others may be affected, this (SNUR) issued under TSCA section 5(a),
publish in the Federal Register a notice action applies directly to the submitters for ‘‘test marketing’’ purposes, which is
of receipt of a Premanufacture notice of the actions addressed in this referred to as a test marketing
(PMN); an application for a test document. exemption, or TME. For more
marketing exemption (TME), both information about the requirements
pending and/or expired; and a periodic B. What should I consider as I prepare applicable to a new chemical go to:
status report on any new chemicals my comments for EPA? http://www.epa.gov/oppt/newchems.
under EPA review and the receipt of 1. Submitting CBI. Do not submit this Under TSCA sections 5(d)(2) and
notices of commencement (NOC) to information to EPA through 5(d)(3), EPA is required to publish in
ebenthall on DSK5MVXVN1PROD with NOTICES
manufacture those chemicals. This regulations.gov or email. Clearly mark the Federal Register a notice of receipt
document covers the period from June the part or all of the information that of a PMN or an application for a TME
1, 2016 to June 30, 2016. you claim to be CBI. For CBI and to publish in the Federal Register
DATES: Comments identified by the information in a disk or CD–ROM that periodic reports on the status of new
specific case number provided in this you mail to EPA, mark the outside of the chemicals under review and the receipt
document, must be received on or disk or CD–ROM as CBI and then of NOCs to manufacture those
before August 29, 2016. identify electronically within the disk or chemicals.
VerDate Sep<11>2014 21:05 Jul 29, 2016 Jkt 238001 PO 00000 Frm 00055 Fmt 4703 Sfmt 4703 E:\FR\FM\29JYN1.SGM 29JYN1](https://thefederalregister.org/doc/81_FR_50122/page/1.svg)
![Federal Register / Vol. 81, No. 146 / Friday, July 29, 2016 / Notices 49977
IV. Receipt and Status Reports specific information provided by the PMN; The date the PMN was received
As used in each of the tables in this submitter was claimed as CBI. by EPA; the projected end date for
unit, (S) indicates that the information For the 60 PMNs received by EPA EPA’s review of the PMN; the
in the table is the specific information during this period, Table 1 provides the submitting manufacturer/importer; the
provided by the submitter, and (G) following information (to the extent that potential uses identified by the
indicates that the information in the such information is not claimed as CBI): manufacturer/importer in the PMN; and
table is generic information because the The EPA case number assigned to the the chemical identity.
TABLE 1—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016
Projected
Case No. Received date notice Manufacturer importer Use Chemical
end date
P–16–0273 6/13/2016 9/11/2016 CBI ............................. (G) Ingredient in metal (G) Alkyl heteromonocycle, polymer with
working fluids. heteromonocycle, carboxyalkyl alkyl ether.
P–16–0345 6/13/2016 9/11/2016 CBI ............................. (G) Processing aid ..... (G) Acrylamide, polymer with methacrylic acid
derivatives.
P–16–0377 6/2/2016 8/31/2016 CBI ............................. (G) Film component ... (G) Polyester polyol.
P–16–0380 6/2/2016 8/31/2016 CBI ............................. (G) Component in (G) Formic acid, compounds (compds.) with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-pol-
yethylene glycol ether with bisphenol a
(2:1) polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1,3-dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
acetates (salts).
P–16–0380 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Formic acid, compds. with hydrolyzed
for automotive bisphenol a-epichlorohydrin-polyethylene
electrocoat resin. glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
acetates (salts).
P–16–0381 6/2/2016 8/31/2016 CBI ............................. (G) Component in (G) Propanoic acid, 2-hydroxy-, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-pol-
yethylene glycol ether with bisphenol a
(2:1) polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1,3-dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products for-
mates (salts).
P–16–0381 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy-, compds. with
for automotive hydrolyzed bisphenol a-epichlorohydrin-pol-
electrocoat resin. yethylene glycol ether with bisphenol a
(2:1) polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1, 3-dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products for-
mates (salts).
P–16–0382 6/2/2016 8/31/2016 CBI ............................. (G) Component in (G) Formic acid, compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-polyethylene
glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates(salts).
P–16–0382 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Formic acid, compds. with hydrolyzed
for automotive bisphenol a-epichlorohydrin-polyethylene
electrocoat resin. glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates (salts).
ebenthall on DSK5MVXVN1PROD with NOTICES
P–16–0383 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Formic acid, compds. with hydrolyzed
for automotive bisphenol a-epichlorohydrin-polyethylene
electrocoat resin. glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
acetates (salts).
VerDate Sep<11>2014 21:05 Jul 29, 2016 Jkt 238001 PO 00000 Frm 00056 Fmt 4703 Sfmt 4703 E:\FR\FM\29JYN1.SGM 29JYN1](https://thefederalregister.org/doc/81_FR_50122/page/2.svg)
![49978 Federal Register / Vol. 81, No. 146 / Friday, July 29, 2016 / Notices
TABLE 1—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Projected
Case No. Received date notice Manufacturer importer Use Chemical
end date
P–16–0384 6/2/2016 8/31/2016 CBI ............................. (G) Component of (G) Propanoic acid, 2-hydroxy-, compds. with
electrocoat resin. hydrolyzed bisphenol a-epichlorohydrin-pol-
yethylene glycol ether with bisphenol a
(2:1) polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1,3-dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products for-
mates (salts).
P–16–0384 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Propanoic acid, 2-hydroxy-, compds. with
for automotive hydrolyzed bisphenol a-epichlorohydrin-pol-
electrocoat resin. yethylene glycol ether with bisphenol a
(2:1) polymer-N1-(1,3-dimethylbutylidene)-
N2-[2-[(1,3-dimethylbutylidene)amino]-
ethyl]-1,2-ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products for-
mates (salts).
P–16–0385 6/2/2016 8/31/2016 CBI ............................. (G) Component in (G) Formic acid, compds. with hydrolyzed
electrocoat resin. bisphenol a-epichlorohydrin-polyethylene
glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates(salts).
P–16–0385 6/2/2016 8/31/2016 CBI ............................. (S) Anti-Crater additive (G) Formic acid, compds. with hydrolyzed
for automotive bisphenol a-epichlorohydrin-polyethylene
electrocoat resin. glycol ether with bisphenol a (2:1) polymer-
N1-(1,3-dimethylbutylidene)-N2-[2-[(1, 3-
dimethylbutylidene)amino]ethyl]-1,2-
ethanediamine-dialdehyde-2-
(methylamino)ethanol reaction products
sulfamates(salts).
P–16–0394 6/7/2016 9/5/2016 CBI ............................. (G) Adhesive .............. (G) Benzenedicarboxylic acid, polymer with
decanedioic acid and dodecanedioic acid,
ethanediol, hexanedioic acid, hexanediol,
alpha-hydro-omega-
hydroxypoly[oxy(methyl-1,2-ethanediyl)],
isobenzofurandione,1,1′-methylenebis[4-
isocyanatobenzene], phenol and
trimethylbicyclo hept-2-ene.
P–16–0395 6/2/2016 8/31/2016 CBI ............................. (S) Polymeric inter- (G) Methacrylic acid, polymer with alkyl
mediate for the pro- methacrylates and substituted acrylamide,
duction of acrylic ammonium salt.
polymers for indus-
trial coatings.
P–16–0396 6/2/2016 8/31/2016 CBI ............................. (G) Specialty chemical (G) Alkylaminium hydroxide.
for processing addi-
tive.
P–16–0398 6/6/2016 9/4/2016 CBI ............................. (G) Corrosion inhibitor (G) Di-ammonium di-carboxylate.
P–16–0399 6/17/2016 9/15/2016 Tryeco Llc ................... (S) Agricultural soil (S) Starch, polymer with 2-propenoic acid,
amendment for filed potassium salt. oxidized.
crops seed coating
and turf.
P–16–0400 6/6/2016 9/4/2016 Shell Chemical LP ...... (S) Use in cured coat- (S) Alkanes, C11–16-branched and linear.
ings.
P–16–0400 6/6/2016 9/4/2016 Shell Chemical LP ...... (S) Agrochemical ........ (S) Alkanes, C11–16-branched and linear.
P–16–0400 6/6/2016 9/4/2016 Shell Chemical LP ...... (S) Metalworking fluid (S) Alkanes, C11–16-branched and linear.
use.
P–16–0400 6/6/2016 9/4/2016 Shell Chemical LP ...... (S) Use in cleaning (S) Alkanes, C11–16-branched and linear.
fluids.
P–16–0400 6/6/2016 9/4/2016 Shell Chemical LP ...... (S) Chemical .............. (S) Alkanes, C11–16-branched and linear.
intermediate ................
ebenthall on DSK5MVXVN1PROD with NOTICES
P–16–0402 6/7/2016 9/5/2016 CBI ............................. (S) Flotation additive (G) Propanediamine, [(isoalkyloxy)propyl]
for use in mineral derivs., salts.
processing.
P–16–0403 6/15/2016 9/13/2016 CBI ............................. (G) Open non disper- (G) Heteropolycyclic carboxylic acid, polymer
sive use. with 2-ethyl-2-(hydroxymethyl)-1,3-
propanediol and 4-substitutedbenzene,
substituted carbomonocycle- and alkyl-sub-
stituted carbomonocycle-blocked.
VerDate Sep<11>2014 21:05 Jul 29, 2016 Jkt 238001 PO 00000 Frm 00057 Fmt 4703 Sfmt 4703 E:\FR\FM\29JYN1.SGM 29JYN1](https://thefederalregister.org/doc/81_FR_50122/page/3.svg)
![Federal Register / Vol. 81, No. 146 / Friday, July 29, 2016 / Notices 49979
TABLE 1—PMNS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016—Continued
Projected
Case No. Received date notice Manufacturer importer Use Chemical
end date
P–16–0404 6/8/2016 9/6/2016 CBI ............................. (G) A colorant for dye- (G) Alkyl ester, 2-({4-[2-(trisubstituted
ing various synthetic phenyl)azo]-5-acetamido-2-
fibers and fabrics substitutedphenyl}(substituted
open, non-disper- alkoxy)amino).
sive use.
P–16–0406 6/9/2016 9/7/2016 CBI ............................. (G) Coating ................. (G) Functionalized polyimide.
P–16–0407 6/9/2016 9/7/2016 CBI ............................. (G) Coating ................. (G) Functionalized polyamide.
P–16–0408 6/9/2016 9/7/2016 CBI ............................. (G) A Colorant for (G) 3-pyridinecarbonitrile, 1,2-dihydro-
dyeing various syn- trisubstituted-5-[2-(disubstituted
thetic fibers and fab- phenyl)azo]-2-oxo.
rics open non-dis-
persive use.
P–16–0409 6/15/2016 9/13/2016 CBI ............................. (G) Chemical inter- (G) Alkylphenol.
mediate for the syn-
thesis of another
substance.
P–16–0410 6/14/2016 9/12/2016 CBI ............................. (G) Automotive engine (G) Silicophosphonate—sodium silicate.
fluid additive.
P–16–0411 6/13/2016 9/11/2016 CBI ............................. (G) Crosslinking agent (G) Substituted polyalkylene
polycarbomonocyclic ester, polymer with
polyalkylene glycol, alkoxyalkanol blocked.
P–16–0412 6/13/2016 9/11/2016 Cardolite Corporation (G) Epoxy coating ...... (G) Cashew, nutshell liquid, polymer with
amine and formaldehyde.
P–16–0413 6/13/2016 9/11/2016 Siltech Llc ................... (S) Anti-fingerprint ma- (S) Siloxanes and silicones, di-me, 3-
terial for a metal hydroxypropyl me, me 3,3,4,4,5,5,6,6,6-
coating application. nonafluorohexyl.
P–16–0415 6/17/2016 9/15/2016 CBI ............................. (G) Coating for oil and (G) Polyurethane.
gas industry.
P–16–0417 6/16/2016 9/14/2016 CBI ............................. (G) Adhesive for open, (G) Isocyanate terminated polyurethane resin.
non-descriptive use.
P–16–0418 6/15/2016 9/13/2016 CBI ............................. (G) A colorant for dye- (G) 6-(disubstituted-phenyl azo)-4,7-
ing various synthetic disubstituted-quinolinepropanoic acid, alkyl
fibers and fabrics ester.
open, non-disper-
sive use.
P–16–0419 6/15/2016 9/13/2016 CBI ............................. (G) Use as inter- (G) N-alkyl-dialkylpiperidine.
mediate.
P–16–0420 6/21/2016 9/19/2016 CBI ............................. (S) The notified sub- (G) Dimethyl cyclohexenyl propanol.
stance will be used
as a fragrance in-
gredient being
blended (mixed)
with other fragrance
ingredients to make
fragrance oils that
will be sold to indus-
trial and commercial
customers for their
incorporation into
soaps, detergents,
cleaners and other
similar household
and consumer prod-
ucts.
P–16–0421 6/16/2016 9/14/2016 Guardian Industries (S) Additive to facili- (S) Flue dust, glass manufacturing
Corp. tate melting of sand desulfurizationdefinition: The dust produced
during manufacture from the flue gas exhaust cleaning of a
of glass. glass manufacturing process using car-
bonate containing substances. it consists
primarily of na2so4, na2co3, and
ebenthall on DSK5MVXVN1PROD with NOTICES
na4(so4)(co3).
P–16–0422 6/21/2016 9/19/2016 CBI ............................. (G) Additive for poly- (S) 1,2-cyclohexanedicarboxylic acid, 1-
mers. (phenylmethyl) ester, ester with 2,2,4-
trimethyl-1,3-pentanediol mono(2-
methylpropanoate).
P–16–0423 6/17/2016 9/15/2016 CBI ............................. (G) Intermediate ......... (G) Tetraalkylpiperidinium halide.
P–16–0424 6/17/2016 9/15/2016 CBI ............................. (G) Directing agent ..... (G) Tetraalkylpiperidinium hydroxide.
VerDate Sep<11>2014 21:05 Jul 29, 2016 Jkt 238001 PO 00000 Frm 00058 Fmt 4703 Sfmt 4703 E:\FR\FM\29JYN1.SGM 29JYN1](https://thefederalregister.org/doc/81_FR_50122/page/4.svg)
![Federal Register / Vol. 81, No. 146 / Friday, July 29, 2016 / Notices 49981
For the 23 NOCs received by EPA The EPA case number assigned to the submitter in the NOC; and the chemical
during this period, Table 3 provides the NOC; the date the NOC was received by identity.
following information (to the extent that EPA; the projected date of
such information is not claimed as CBI): commencement provided by the
TABLE 3—NOCS RECEIVED FROM JUNE 1, 2016 TO JUNE 30, 2016
Commence-
Case No. Received date Chemical
ment date
J–14–0001 .......... 6/7/2016 3/13/2014 (G) Saccharomyces cerevisiae, modified.
P–01–0309 ......... 6/17/2016 6/1/2016 (S) Undecanedioic acid, compd. with 2-(2-aminoethoxy)ethanol.
P–12–0121 ......... 6/23/2016 5/25/2016 (S) Acetic acid, 1, 1′-anhydride, reaction products with borax and hydrogen peroxide.
P–13–0930 ......... 6/13/2016 5/24/2016 (G) Substituted phenol.
P–14–0478 ......... 6/23/2016 4/8/2016 (S) Carbonic acid, dimethyl ester, polymer with 1,4-diisocyanatobenzene, 1,6-hexanediol
and 1,5-pentanediol.
P–14–0860 ......... 6/9/2016 5/9/2016 (G) Benzophenonetetracarboxylic dianhydride-methylenediphenylene isocyanate-toluene
diisocyanate copolymer.
P–15–0121 ......... 6/7/2016 6/2/2016 (S) Formaldehyde, polymer with 2-aminocyclopentanemethanamine, 1,4-butanediamine,
1,2-cyclohexanediamine, 1,6-hexanediamine, hexahydro-1h-azepine and 2-methyl-1,5,-
pentanediamine.
P–15–0703 ......... 6/15/2016 5/28/2016 (S) 2-propenoic acid, 2-methyl-, 2-(diethylamino)ethyl ester, polymer with butyl 2-
propenoate and methyl 2-methyl-2-propenoate, compd. with methyl 4-
methylbenzenesulfonate.
P–16–0022 ......... 6/3/2016 6/3/2016 (S) C10-C20 neo fatty acids.
P–16–0101 ......... 6/9/2016 6/8/2016 (G) Disubstituted benzene alkanal.
P–16–0159 ......... 6/9/2016 3/31/2016 (G) Substituted polyaromatic sodium dicarboxylate.
P–16–0173 ......... 6/23/2016 6/6/2016 (G) Aminoalkyl alaninate sodium salt (1:1), polymer with alkyldiol, dialkyl-alkanediol,
alkyldioic acid, alkyldiol, polyol, cycloaliphatic diisocyanate, polyalkylene glycol mono-
alkyl ether-blocked.
P–16–0200 ......... 6/14/2016 6/7/2016 (S) 1-propanone, 1-[1,1′-biphenyl]-4-yl-2-methyl-2-(4-morpholinyl)-
P–16–0201 ......... 6/6/2016 5/22/2016 (S) Oxirane, 2-methyl-, polymer with alpha-hydro-omega-hydroxy- poly[oxy(methyl-1,2-
ethanediyl)], 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethyl cyclohexane, oxirane and
2-[[3-(triethoxysilyl)propoxy]methyl]oxirane, poly ethylenepolypropylene glycol mono-bu
ether monoether with propylene oxide-2-[[3-(tri ethoxysilyl)propoxy]methyl] oxirane
polymer- and polypropylene glycol mono-bu ether-blocked.
P–16–0203 ......... 6/2/2016 5/22/2016 (G) Pentanedioic acid, compd. with polyalkylpolyamine.
P–16–0208 ......... 6/6/2016 5/23/2016 (S) Carbon, calcination products with sulfur.
P–16–0222 ......... 6/27/2016 6/26/2016 (G) Alkanedioic acid, polymer with substituted heteromonocycle, â±-hydro-ã¿â-
hydroxypoly(oxy-1,2-ethanediyl) ether with substituted alkanediol and substituted.
bis[carbomonocycle], alkanoate.
P–16–0223 ......... 6/10/2016 6/2/2016 (G) Wax.
P–16–0227 ......... 6/10/2016 6/8/2016 (G) Cashew nutshell liquid, polymer with diisocyanatoalkane, substituted-polyoxyalkyldiol,
hydroxy-terminated .polybutadiene and 4,4′-(1-methylethylidene)bis[2-(2-propen-1-
yl)phenol].
P–16–0228 ......... 6/21/2016 6/6/2016 (G) Derivative of a glycerol, alkanoic acid and mixed fatty acids polymer.
P–16–0235 ......... 6/6/2016 5/31/2016 (G) Polymeric methylene diphenyldiisocyanate, polymer with oxyalkyl diol, methacrylate
blocked.
P–16–0250 ......... 6/24/2016 6/24/2016 (G) Substituted carbomonocycle, polymer with substituted alkanediol, alkanedioic acid,
alkanediol, substituted alkanoic acid and substituted carbomonocycle, compd. with sub-
stituted alkane.
P–16–0267 ......... 6/22/2016 6/19/2016 (G) Fatty acids, reaction products with alkylamine, polymers with substituted
carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate,
lactates (salts).
Authority: 15 U.S.C. 2601 et seq. ENVIRONMENTAL PROTECTION Notice
Dated: July 25, 2016. AGENCY Section 309(a) of the Clean Air Act
Megan Carroll, requires that EPA make public its
Acting Information Management Division, [ER–FRL–9028–3] comments on EISs issued by other
Office of Pollution Prevention and Toxics. Federal agencies. EPA’s comment letters
[FR Doc. 2016–18015 Filed 7–28–16; 8:45 am]
Environmental Impact Statements; on EISs are available at: http://
Notice of Availability www.epa.gov/compliance/nepa/
BILLING CODE 6560–50–P
eisdata.html.
Agency: Office of Federal Activities,
EIS No. 20160172, Final Supplement,
ebenthall on DSK5MVXVN1PROD with NOTICES
General Information (202) 564–7146 or
http://www.epa.gov/nepa. USN, AK, Gulf of Alaska Navy
Training Activities, Review Period
Weekly receipt of Environmental Impact Ends: 08/29/2016, Contact: Amy Burt
Statements (EISs) 360–396–0403
Filed 07/18/2016 Through 07/22/2016 EIS No. 20160173, Final, BLM, AK,
Eastern Interior Proposed Resource
Pursuant to 40 CFR 1506.9.
Management Plan, Review Period
VerDate Sep<11>2014 21:05 Jul 29, 2016 Jkt 238001 PO 00000 Frm 00060 Fmt 4703 Sfmt 4703 E:\FR\FM\29JYN1.SGM 29JYN1](https://thefederalregister.org/doc/81_FR_50122/page/6.svg)
Document Created: 2018-02-08 07:51:44
Document Modified: 2018-02-08 07:51:44
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before August 29, 2016. | |
| Contact | For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 202-564-8593; email | |
| FR Citation | 81 FR 49976 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR