| Page Range | 76671-76683 | |
| FR Document | 2016-26510 |
[Federal Register Volume 81, Number 213 (Thursday, November 3, 2016)] [Notices] [Pages 76671-76683] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-26510] ----------------------------------------------------------------------- SECURITIES AND EXCHANGE COMMISSION [Release No. 34-79189; File No. SR-C2-2016-020] Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Notice of Filing of a Proposed Rule Change Relating to Price Protection Mechanisms and Risk Controls October 28, 2016. Pursuant to Section 19(b)(1) of the Securities Exchange Act of 1934 (the ``Act''),\1\ and Rule 19b-4 thereunder,\2\ notice is hereby given that on October 25, 2016, C2 Options Exchange, Incorporated (``Exchange'' or ``C2'') filed with the Securities and Exchange Commission (``Commission'') the proposed rule change as described in Items I, II, and III below, which Items have been prepared by the Exchange. The Commission is publishing this notice to solicit comments on the proposed rule change from interested persons. --------------------------------------------------------------------------- \1\ 15 U.S.C. 78s(b)(1). \2\ 17 CFR 240.19b-4. --------------------------------------------------------------------------- I. Self-Regulatory Organization's Statement of the Terms of Substance of the Proposed Rule Change The Exchange proposes to enhance current and adopt new price protection mechanisms and risk controls for orders and quotes. The text of the proposed rule change is available on the Exchange's Web site (http://www.c2exchange.com/Legal/), at the Exchange's Office of the Secretary, and at the Commission's Public Reference Room. II. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change In its filing with the Commission, the Exchange included statements concerning the purpose of and basis for the proposed rule change and discussed any comments it received on the proposed rule change. The text of these statements may be examined at the places specified in Item IV below. The Exchange has prepared summaries, set forth in sections A, B, and C below, of the most significant aspects of such statements. A. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change 1. Purpose The Exchange has in place various price check mechanisms and risk [[Page 76672]] controls that are designed to prevent incoming orders and quotes from automatically executing at potentially erroneous prices or to assist Trading Permit Holders (``TPHs'' or ``Participants'') with managing their risk.\3\ These mechanisms and controls are designed to help maintain a fair and orderly market by mitigating potential risks associated with orders trading at prices that are extreme and potentially erroneous, or in extremely large and potentially erroneous volumes, that may be harmful to market participants. The Exchange proposes to amend Rules 6.17 and 8.12 to add new, as well as enhance current, price protection mechanisms and risk controls to further prevent potentially harmful and disruptive trading.\4\ --------------------------------------------------------------------------- \3\ See, e.g., 6.13, Interpretation and Policy .04 (price check parameters for complex orders), 6.17(a) (market-width and drill through price check parameters), Rule 6.17(b) (simple limit order price parameters), 6.17(d) and (e) (price protections), and 8.12 (Quote Risk Monitor Mechanism (``QRM'')). \4\ The proposed rule change makes conforming changes to other rules, as further discussed below. --------------------------------------------------------------------------- Limit Order Price Parameter for Simple Orders The proposed rule change amends the limit order price parameter for simple orders in Rule 6.17(b). This price parameter currently states the Exchange will not accept for execution eligible limit orders if:Prior to the opening of a series (including before a series is opened following a halt), the order is to buy (sell) at more than an acceptable tick distance (``ATD'') above (below) the Exchange's previous day's close; however, this is not applicable to limit orders of C2 Market-Makers or away Market-Makers, or to intermarket sweep orders (``ISO''s), which cannot be entered prior to the opening on the System; or once a series has opened, the order is to buy (sell) at more than an ATD above (below) the disseminated Exchange offer (bid). The proposed rule change states the System rejects back to a TPH an order to buy (sell) at more than an acceptable tick distance above (below) if: Prior to the opening of a series (including during any pre-opening period and opening rotation), (1) the last disseminated national best offer (``NBO'') (national best bid (``NBB'')), if a series is open on another exchange(s), or (2) the Exchange's previous day's closing price, if a series is not yet open on any other exchange; if the NBBO is locked, crossed or unavailable; \5\ or if there is no NBO (NBB) and the previous day's closing price is greater (less) than or equal to the NBB (NBO). However, this does not apply to orders of C2 or away market-makers, or to ISOs; if there is no NBO (NBB) and the Exchange's previous day's closing price is less (greater) than the NBB (NBO); or if there is no NBBO and no Exchange previous day's closing price; --------------------------------------------------------------------------- \5\ If the NBBO (or BBO) is not currently being disseminated, the NBBO (or BBO) will be considered ``unavailable.'' --------------------------------------------------------------------------- intraday, the last disseminated NBO (NBB), or the Exchange's best offer (bid) if the NBBO is locked, crossed or unavailable. However, this does not apply if there is no NBBO and no Exchange best bid or offer (``BBO''); or during a trading halt (including during any pre-opening period or opening rotation prior to re-opening following the halt), the last disseminated NBO (NBB). However, this does not apply to a buy (sell) order if the NBBO is locked, crossed or unavailable; to ISOs; or if there is no NBO (NBB). Prior to a series opening on C2, the series may already be open on another exchange(s), in which case that exchange(s) would be disseminating an NBBO. The NBBO would more accurately reflect the then- current market, rather than the previous day's closing price, and thus the Exchange believes it would be a better measure to use for purposes of determining the reasonability of the prices of orders. If the series is not yet open on any other exchange, the System will continue to use the Exchange's previous day's closing price as the comparison figure. Additionally, the System will use the Exchange's previous day's closing price if the NBBO is locked, crossed or unavailable (and thus unreliable) or if there is no NBO (NBB) and the Exchange's previous day's closing price is greater (less) than or equal to the NBB (NBO). The check will continue to not apply to orders of C2 or away market- makers, or to ISOs,\6\ and will also not apply to orders entered when there is no NBO (NBB) and the Exchange's previous day's closing price is less (greater) than the NBB (NBO) or if there is no NBBO and no Exchange previous day's closing price (for example, if the order is in a newly listed series) (and thus no reliable measure against which to compare the price of the order to determine its reasonability). Prior to the opening of a series, and the NBBO is unavailable, the previous day's closing price is the most relevant pricing information to determine the price at which an investor may want to buy or sell within a series, and the Exchange believes it is a reasonable substitute for the NBB or NBO when not available. With respect to the proposed provisions regarding the applicability of the check when there is no NBO (NBB) against which the price of the buy (sell) order can be compared to determine price reasonability, the Exchange believes using the previous day's closing price is appropriate if that price is greater (less) than or equal to the NBB (NBO) because it does not cross the disseminated NBB (NBO). On the contrary, if that price is less (greater) than the NBB (NBO), and thus would cross the disseminated NBB (NBO), the Exchange believes that closing price is too far away from what an NBO (NBB) would be if an offer (bid) quote or sell (buy) order were to be entered and essentially creates a crossed, unreliable market. --------------------------------------------------------------------------- \6\ The proposed rule change moves this rule provision to subparagraphs (b)(1) and (b)(3). The proposed rule change also deletes the language stating subparagraph (b)(2) applies to ISOs, because it is unnecessary to explicitly state this given the rules clarify when a provision does not apply to a specific order type. --------------------------------------------------------------------------- Once a series has opened on C2, this check will compare the price of a buy (sell) order to the last disseminated NBO (NBB) rather than the Exchange best offer (bid). The NBBO would more accurately reflect the then-current market, rather than the Exchange BBO, and thus the Exchange believes it would be a better measure to use for purposes of determining the reasonability of the prices of orders. The System will continue to use the Exchange BBO if the NBBO is locked, crossed or unavailable (and thus unreliable). This check will not apply intraday if there is no NBBO and no BBO (and thus no reliable measure against which to compare the price of the order to determine its reasonability). With respect to orders entered during a trading halt (including during any pre-opening period or opening rotation prior to re-opening following a halt), the proposed rule change states the System will use the last disseminated NBO (NBB) rather than the Exchange's previous day's closing price (as the current rule states). If a halt occurs during the trading day, the NBO (NBB) would more accurately reflect the then-current market rather than the previous day's closing price, which would be stale by that time. This check will not apply to orders if the NBBO is locked, crossed or unavailable (and thus unreliable); to ISOs; or if there is no NBO (NBB) (and thus no reliable measure against which to compare the price of the order to determine its reasonability). The rule currently states the Exchange determines the ATD on a series-by- [[Page 76673]] series \7\ and premium basis and will be no less than five minimum increment ticks. The proposed rule change amends the minimum ATD to be two minimum increment ticks rather than five. The Exchange believes it may be appropriate to set the ATD for certain classes (depending on the minimum increment and premium) to be fewer than five to ensure that the ATD price is not so far away from the market price and thus this price check is effective given the market model or market conditions.\8\ Additionally, because market conditions during pre-opening periods, trading rotations, and trading halts are different than those present when the exchange is open for trading, the proposed rule change provides the Exchange with flexibility to apply a different ATD during those times (which the Exchange may want to be less than the current minimum of five). The Exchange believes it is appropriate to have the ability to apply a different ATD during the pre-open period or opening rotation so the check does not impact the Exchange's ability to open an option or determination of the opening price. The Exchange may also want to apply a different ATD during a halt, as pricing during those times may be volatile and inaccurate.\9\ --------------------------------------------------------------------------- \7\ The proposed rule change amends this to be class-by-class rather than series-by-series. The Exchange generally sets parameters on a class-by-class basis. The proposed rule change also moves this provision from subparagraph (c)(1) to paragraph (b). \8\ The Exchange notes current Rule 6.17(c)(1) sets the minimum ATD at two minimum increments for the drill through protection. \9\ Note current Rule 6.17(c)(2) (which becomes proposed Rule 6.17(c)) permits a senior official on the Exchange Help Desk to grant intra-day relief by widening or inactivating one or more of the applicable acceptable price range (``APR'') and/or ATD parameters settings in the interest of a fair and orderly market. The Exchange makes additional nonsubstantive changes to paragraph (c), including to clarify it applies to paragraphs (a) and (b) of the Rule. The provisions for the checks in paragraphs (d) and (e) specify when those checks do and do not apply. --------------------------------------------------------------------------- The proposed rule change deletes the Exchange's flexibility to not apply this price parameter to immediate-or-cancel orders, as the Exchange believes these orders are also at risk of execution at extreme and potentially erroneous prices and thus will benefit from applicability of these checks. The proposed rule change also states this price parameter does not apply to orders with a stop contingency. By definition, the stop contingency \10\ is triggered for a buy order if there is a last sale or bid at or above the stop price and for a sell order if there is a last sale or offer at or below the stop price. As a result, buy orders with a stop contingency are generally submitted at a triggering price that is above the NBO, and sell orders with a stop contingency are generally submitted at a triggering price that is below the NBB. Because these orders are expected to be priced outside the NBBO, the Exchange will not apply this check to not interfere with the application of the stop contingency.\11\ --------------------------------------------------------------------------- \10\ See Rule 6.10. \11\ The proposed rule change also makes nonsubstantive changes to Rule 6.17(b), including moving a provision from current paragraph (c) into proposed paragraph (b) regarding the precedence of the limit order price parameter that applies only to proposed paragraph (b). The proposed rule change also deletes the language in current paragraph (c) regarding returning an order to the order entry firm, as the proposed language in paragraph (b) more directly states the order will be rejected, which is consistent with System functionality. --------------------------------------------------------------------------- Drill Through Price Check Parameter The proposed rule change amends the drill through price check parameter in Rule 6.17(a)(2). Currently, the System will not automatically execute eligible orders that are marketable if the execution would follow an initial partial execution on the Exchange and would be at a subsequent price not within an ATD from the initial execution (determined by the Exchange on a series-by-series and premium basis for market orders and/or marketable limit orders).\12\ An ATD may be no less than two minimum increment ticks. Pursuant to paragraph (c), if an execution is suspended because executing the remaining unexecuted portion of an order would exceed the drill through ATD, then such unexecuted portion will be cancelled. --------------------------------------------------------------------------- \12\ Pursuant to the rule filing of Chicago Board Options Exchange, Incorporated, upon which this rule was based and which proposed this language, the intent of this provision is to allow the Exchange to determine to apply the drill through price check parameter, as well as the market-width price check parameter, to market orders and/or marketable limit orders. See Securities Exchange Act Release No. 34-63191 (October 27, 2010), 75 FR 67411 (November 2, 2010) (SR-CBOE-2010-094) (notice of filing and immediate effectiveness of proposed rule change related to the automatic execution feature, including a change to allow CBOE to determine ``to apply these price check parameters to market and/or marketable limit orders''). Currently, the Exchange applies the market-width check to market orders and the drill through check to market and marketable limit orders. The proposed rule change merely removes this flexibility from the Rules and codifies the current practice (which is permitted under the current Rule). --------------------------------------------------------------------------- Pursuant to the proposed rule change, if a buy (sell) order not yet exposed via HAL (pursuant to Rule 6.18) partially executes, and the System determines the unexecuted portion would execute at a subsequent price higher (lower) than the price that is an ATD above (below) the NBO (NBB) (the ``drill through price''), the System will not automatically execute that portion and will expose \13\ that portion via HAL at the better of the NBBO and the drill through price (if eligible for HAL). The Exchange will determine the ATD on a class and premium basis (which may be no less than two minimum increment ticks),\14\ which the Exchange will announce via Regulatory Circular. If a buy (sell) order is exposed via HAL (other than pursuant to the previous sentence) or SAL \15\ and, following the exposure period pursuant to Rule 6.18 or 6.14, respectively, the System determines the order (or any unexecuted portion) would execute at a price higher (lower) than the drill through price, the System will not automatically execute the order (or unexecuted portion).\16\ --------------------------------------------------------------------------- \13\ Currently, the Exchange has not activated HAL in any class. \14\ The proposed rule change amends this to be class-by-class rather than series-by-series. The Exchange generally sets parameters on a class-by-class basis. \15\ The proposed rule change expands this to include SAL, a similar price improvement auction the Exchange may activate in classes in which it did not activate HAL. In classes in which SAL is activated, an order eligible for SAL will be exposed immediately and would not partially execute prior to being exposed via SAL. For this reason, SAL is not included in proposed Rule 6.17(a)(2)(A). Currently, the Exchange has not activated SAL in any class. \16\ The proposed rule change makes corresponding changes to Rules 6.14 and 6.18 to clarify orders (or portions) that do not execute following the applicable exposure process are subject to the drill through price check parameter in proposed Rule 6.17(a)(2). The proposed rule change also amends Rule 6.18 to provide orders (or any unexecuted portions) may initiate a HAL at the better of the drill through price and NBBO and make other nonsubstantive changes. --------------------------------------------------------------------------- Under the proposed rule change, rather than be cancelled, these orders (or unexecuted portions) will rest in the book (based on the time at which they enter the book for priority purposes) for a time period in milliseconds (which the Exchange will determine and announce via Regulatory Circular and will not exceed three seconds) \17\ with a price equal to the drill through price.\18\ This time period will provide an additional opportunity for execution for these orders (or unexecuted portions) at a price that does not appear to be erroneous. If the order (or any unexecuted portion) does not execute during that time period, the System cancels it. Buy (sell) orders (or any unexecuted portion) not eligible for [[Page 76674]] HAL or SAL that would execute at a price higher (lower) than the drill through price will continue to be cancelled. To avoid any confusion, the proposed rule change also clarifies this drill through check does not apply to executions of orders following exposure at the open pursuant to Rule 6.11(g)(2) and Interpretation and Policy .04, which instead are subject to a separate drill through protection set forth in that rule.\19\ --------------------------------------------------------------------------- \17\ Because the Exchange currently has not activated HAL in any class, no initial time period will be set. \18\ Any order (or unexecuted portion) that by its terms cancels if it does not execute immediately (including immediate-or-cancel, fill-or-kill, intermarket sweep, and market-maker trade prevention orders) will be cancelled rather than rest in the book for this time period in accordance with the definition of those order types. \19\ The proposed rule change amends the market width price check parameter in Rule 6.17(a)(1) to be determined on a class-by- class basis rather than series-by-series. The Exchange generally sets parameters on a class-by-class basis. The proposed rule change makes additional nonsubstantive changes to Rule 6.17(a)(1), including moving provisions from current paragraph (c) applicable only to the market-width parameter (including the provision regarding setting the APR and the provision stating an order that does not meet the APR width will be cancelled) to proposed subparagraph (a)(1). The proposed rule change also amends Rule 6.11(g)(2) and Interpretation and Policy .04 to update the cross- reference to the drill through price check parameter and indicate the Exchange will determine the ATD for the opening drill through protection on a class-by-class rather than series-by-series basis consistent with the proposed rule change described above. --------------------------------------------------------------------------- The following examples illustrate the new functionality to briefly rest orders in the book in connection with the drill through price check parameter. As noted above, C2 has not activated HAL or SAL on C2, and thus this new functionality will apply to orders on C2 only if C2 activates those auctions for any classes. Upon approval of this proposed rule change, unless C2 activates these auctions at this time, the drill through price check parameter will apply to orders in the same manner as it does today (as described in proposed Rule 6.17(a)(2)(D))--buy (sell) orders (or any unexecuted portion) that would execute at a subsequent price higher (lower) than the drill through price will be cancelled. Example #1 Suppose C2's market for a series in a class with a 0.05 minimum increment is 0.90-1.00, represented by a quote for 10 contracts on each side (the quote offer is Quote A). The following sell orders or quote offers also rest in the series: 10 contracts at 1.05 (Order A), 10 contracts at 1.10 (Quote B), 10 contracts at 1.15 (Order B), and 100 contracts at 1.20 (Order C). The market for away exchanges is 0.80- 1.25. The Exchange's drill through amount for the class is three ticks (or 0.15), and the drill through resting time period is two seconds. The System receives an incoming order to buy 100 at 1.30, which executes against resting orders and quotes as follows: 10 against Quote A at 1.00, 10 against Order A at 1.05, 10 against Quote B at 1.10, and 10 against Order B at 1.15. The System will not automatically execute the remaining 60 contracts from the incoming order against Order C, because 1.20 is more than 0.15 away from the initial execution price of 1.00 and thus exceeds the drill through price check. The 60 unexecuted contracts are then exposed pursuant to HAL at 1.15 (which is the drill through price, and better than the NBO). No responses to trade against the remaining 60 contracts are entered during the auction, so the 60 contracts remain unexecuted. These contracts then rest in the book for two seconds at a price of 1.15. No incoming orders are entered during that time period to trade against the remaining 60 contracts, so the System cancels that remaining portion of the original incoming order. Example #2 Suppose C2's market for a series in a class with a 0.05 minimum increment is 0.90-1.00, represented by a quote for 10 contracts on each side (the quote offer is Quote A). The following sell orders or quote offers also rest in the series: 10 contracts at 1.05 (Order A), 10 contracts at 1.10 (Quote B), 10 contracts at 1.15 (Order B), and 100 contracts at 1.20 (Order C). The market for away exchanges is 0.80- 1.10, with 5 contracts available on each side. The Exchange's drill through amount for the class is three ticks (or 0.15), and the drill through resting time period is two seconds. The System receives an incoming order to buy 100 at 1.30, which executes against resting orders and quotes as follows: 10 against Quote A at 1.00, 10 against Order A at 1.05, and 10 against Quote B at 1.10. The System will not automatically execute the remaining 70 contracts from the incoming order against Orders B and C, because C2 no longer has size available at the NBBO. The 70 unexecuted contracts are then exposed pursuant to HAL at 1.10 (which is the NBO). No responses to trade against the remaining 70 contracts are entered during the auction, so 5 contracts route away to trade at 1.10 against the 5 contracts available at an away exchange. The best offer from an away exchange then changes to 1.25. Of the remaining 65 unexecuted contracts from the incoming order, 10 trade against Order B at 1.15. The System will not automatically execute the remaining 55 contracts from the incoming order against Order C, because 1.20 is more than 0.15 away from the initial execution price of 1.00 and thus exceeds the drill through price check. These contracts will not be exposed pursuant to HAL again, and instead will rest in the book for two seconds at a price of 1.15. An incoming order to buy 20 at 1.15 is entered after one second, which trades against 20 of the 55 resting contracts. No other incoming orders are entered during that time period to trade against the remaining 35 contracts, so the System cancels that remaining portion of the original incoming order. TPH-Designated Risk Settings The proposed rule change amends Rule 6.17 to authorize the Exchange to share any TPH-designated risk settings in the system with a Clearing TPH that clears Exchange transactions on behalf of the TPH. Rule 3.1 states Trading Permits confer the ability to transact on the Exchange, and only CBOE Trading Permit Holders in good standing or non-CBOE Trading Permit Holders whose applications to become C2 Permit Holders are approved by the Exchange are eligible to receive Trading Permits. All Exchange transactions must be submitted for clearance to the Options Clearing Corporation (the ``Clearing Corporation'') and are subject to the Clearing Corporation's rules. For each Exchange transaction in which it participates, a Participant must immediately give up the name of the Clearing Participant through which the Exchange transaction will be cleared.\20\ Each TPH must provide a letter of guarantee or authorization for the TPH's trading activities on the Exchange from a Clearing Participant.\21\ --------------------------------------------------------------------------- \20\ See Rule 6.30. \21\ See Rule 3.10. --------------------------------------------------------------------------- Thus, while not all TPHs are Clearing TPHs, all TPHs require a Clearing TPH's consent to clear Exchange transactions on their behalf in order to conduct business on the Exchange. The letter of authorization or guarantee describes the relationship between the TPH and Clearing TPH and provides the Exchange with notice of which Clearing TPHs have relationships with which TPHs. The Clearing TPH that guarantees the TPH's Exchange transactions has a financial interest in understanding the risk tolerance of the TPH. This proposed rule change would provide the Exchange with authority to provide Clearing TPHs directly with information that may otherwise be available to such Clearing TPHs by virtue of their relationship with respective TPHs.\22\ --------------------------------------------------------------------------- \22\ The Exchange will share a TPH's risk settings with its Clearing TPH(s) upon request from the Clearing TPH(s). --------------------------------------------------------------------------- The risk settings that the Exchange may share with Clearing TPHs include, but are not limited to, settings under Rule 8.12 (related to QRM, as further described below), and will include [[Page 76675]] settings under proposed Rule 6.17(g) (related to order entry and execution rate checks, as described below) and (h) (related to maximum contract size, as described below). To the extent the Exchange proposes additional rules providing for TPH-designated risk settings other than those in current rules and this rule filing, the Exchange will be able to share those settings with Clearing TPHs under this proposed change as well.\23\ Other options exchanges have similar rules permitting them to share member-designated risk settings with other members that clear transactions on the member's behalf.\24\ --------------------------------------------------------------------------- \23\ The proposed rule change also makes nonsubstantive changes to Rule 6.17, including adding risk controls to the name of the rule and an introductory sentence that the System's acceptance and execution of orders and quotes are subject to the price protection mechanisms and risk controls in Rule 6.17 and other rules. \24\ See, e.g., Miami International Securities Exchange, LLC (``MIAX'') Rule 500; NASDAQ OMX BX, Inc. (``BX'') Chapter VI, Section 20; NYSE Arca, Inc. (``Arca'') Rule 6.2A(a); NYSE MKT LLC (``MKT'') Rule 902.1NY(a); and NASDAQ OMX PHLX LLC (``PHLX'') Rule 1016. --------------------------------------------------------------------------- Put Strike Price/Call Underlying Value Checks The proposed rule change amends the put strike price and call underlying value checks in Rule 6.17(d). Pursuant to these checks, the System rejects back to the TPH a quote or buy limit order for (1) a put if the price of the quote bid or order is greater than or equal to the strike price of the option, or (2) a call if the price of the quote bid or order is greater than or equal to the consolidated last sale price of the underlying security, with respect to equity and exchange-traded fund options, or the last disseminated value of the underlying index, with respect to index options.\25\ The proposed rule change extends this check to apply to market orders (or any remaining size after partial execution). --------------------------------------------------------------------------- \25\ Note the current rule states the check does not apply if market data for the underlying is unavailable. If the value of the underlying is not currently being disseminated, market data for the underlying will be considered ``unavailable.'' --------------------------------------------------------------------------- With respect to put options, a TPH seeks to buy an option that could be exercised into the right to sell the underlying. The value of a put can never exceed the strike price of the option, even if the underlying goes to zero. For example, one put for stock ABC with a strike price of $50 gives the holder the right to sell 100 shares of ABC for $50, no more or less. Therefore, it would be illogical to pay more than $50 for the right to sell shares of ABC, regardless of the price of ABC. Under this check, the Exchange deems any put bid or buy limit order with a price that equals or exceeds the strike price of the option to be erroneous and rejects it, and the Exchange believes it would be appropriate to similarly reject a market order (or remaining size after partial execution) that would execute at that erroneous price. With respect to call options, a TPH seeks to buy an option that could be exercised into the right to buy the underlying. The Exchange does not believe a derivative product that conveys the right to buy the underlying should ever be priced higher than the prevailing value of the underlying itself. In that case, a market participant could purchase the underlying at the prevailing value rather than pay a larger amount for the call. Accordingly, under this check, the Exchange rejects bids or buy limit orders for call options with prices that are equal to or in excess of the value of the underlying. As an example, suppose a TPH submits an order to buy an ABC call for $11 when the last sale price for stock ABC is $10. The System rejects this order. The Exchange believes it would be appropriate to similarly reject a market order (or remaining size after partial execution) that would execute at that erroneous price. The proposed rule change also states the put and call checks will not apply to market orders that execute during the opening process as set forth in Rule 6.11 to avoid impacting the determination of the opening price. Separate price protections apply during the opening process, including the drill through protection in Rule 6.11.\26\ --------------------------------------------------------------------------- \26\ The Exchange also makes a nonsubstantive change to Rule 6.17(d) so the language reads ``greater than or equal to'' rather than ``equal to or greater than,'' which is the standard phrase, as well as to re-letter and re-number subparagraphs to be consistent with other subparagraphs in the rule. --------------------------------------------------------------------------- Quote Inverting NBBO Check The proposed rule change amends Rule 6.17(e) regarding the quote inverting NBBO check. Pursuant to this check, if C2 is at the NBO (NBB), the System rejects a quote back to a Market-Maker if the quote bid (offer) crosses the NBO (NBB) by more than a number of ticks specified by the Exchange. If C2 is not at the NBO (NBB), the System rejects a quote back to a Market-Maker if the quote bid (offer) locks or crosses the NBO (NBB).\27\ If the NBBO is unavailable, locked or crossed, then this check compares the quote to the BBO (if available). The rule is currently silent on what happens if the BBO is also unavailable. Therefore, the proposed rule change clarifies the System does not apply this check to incoming quotes when the BBO is also unavailable, as there is no then-current price to use as a comparison to determine the reasonability of the quote. The proposed rule change also clarifies this is true when a series is open for trading. --------------------------------------------------------------------------- \27\ The System also cancels any resting quote of the Market- Maker in the same series. --------------------------------------------------------------------------- The proposed rule change further clarifies the times when this check applies. Current Rule 6.17(e)(ii) provides the Exchange may not apply the check during the pre-opening, a trading rotation, or trading halt. Proposed Rule 6.17(e)(2) states prior to the opening of a series (including during any pre-opening period and opening rotation), the System does not apply this check to incoming quotes if the series is not open on another exchange. This is consistent with flexibility in the current rule permitting the Exchange to apply (or not apply) the check prior to the open. The Exchange believes without inputs of pricing from other exchanges, it is appropriate to not apply the check if a series is not yet open on another exchange to avoid rejecting quotes that may be consistent with market pricing not yet available in the System. Proposed Rule 6.17(e)(3) deletes the Exchange's flexibility to apply the quote inverting NBBO check during a trading halt. The Exchange currently does not apply the check to quotes entered during these times and does not expect to do so. The proposed rule change moves the provision permitting a senior official at the Exchange's Help Desk to determine not to apply this check in the interest of maintaining a fair and orderly market to proposed Rule 6.17(e)(4). Execution of Quotes That Lock or Cross NBBO The proposed rule change amends the provision related to the execution of quotes that lock or cross the NBBO in current Rule 6.17(e)(iii). As this is a separate limitation on execution than the quote inverting NBBO check in Rule 6.17(e),\28\ the proposed rule change moves this limitation to proposed Rule 6.17(f) (and makes other nonsubstantive changes to the numbering and lettering within that paragraph, as well as adding a name to the paragraph). The rule currently states if the System accepts a quote that locks or crosses the NBBO, the System executes the quote bid (offer) against quotes and orders in the book at a price(s) that is the same or better than [[Page 76676]] the best price disseminated by an away exchange(s) up to the size available on the Exchange and either (1) cancels any remaining size of the quote, if the price of the quote locks or crosses the price disseminated by the away exchange(s), or (2) books any remaining size of the quote, if the price of the quote does not lock or cross the price of the away exchange(s). --------------------------------------------------------------------------- \28\ The quote inverting NBBO check rejects quotes back to a Market-Maker if the quote bid (offer) crosses the NBO (NBB) by more than a specified number of ticks. The limitation on execution of quote that lock or cross the NBBO describes how the System will handle quotes that lock or cross the NBBO (but not by more than the specified number of ticks and thus are accepted). --------------------------------------------------------------------------- In addition, the current rule is silent regarding the applicability of this limitation on execution to quotes when the NBBO is locked, crossed or unavailable. The purpose of this provision is to prevent trade-throughs and displays of locked and crossed markets in accordance with the Options Linkage Plan. However, when the NBBO is locked or crossed, it is unreliable for comparison purposes. Additionally, if there is no NBBO available, then there is no measure against which the System can compare the price of an incoming quote. Therefore, the proposed rule change states if the NBBO is locked, crossed or unavailable, the System does not apply this check to incoming quotes. The linkage rules similarly provide exceptions to the prohibitions on trade-throughs and crossed markets when there is a crossed market or systems or equipment malfunctions.\29\ The proposed rule change adds a senior official at the Exchange's Help Desk may determine not to apply this check in the interest of maintaining a fair and orderly market.\30\ The Exchange may believe it is appropriate to disable this check in response to a market event or market volatility to avoid inadvertently cancelling quotes not erroneously priced but rather priced to reflect potentially rapidly changing prices. --------------------------------------------------------------------------- \29\ See CBOE Rules 6.81 and 6.82 (which are incorporated by reference into the C2 Rules). \30\ Pursuant to Exchange procedures, any decision to not apply the quote inverting NBBO check, as well as the reason for the decision, will be documented, retained, and periodically reviewed. --------------------------------------------------------------------------- Order Entry, Execution and Price Parameter Rate Checks The proposed rule change adopts order entry, execution and price parameter rate checks in proposed Rule 6.17(g). Currently, QRM (described below) provides Market-Makers with functionality to help manage their risk by limiting the number of quotes they may execute in a specified period of time (based on several parameters). The proposed order entry and execution rate checks will provide similar risk- management functionality for orders. These order risk protections are designed to aid TPHs in their risk management by supplementing current and proposed price reasonability checks with activity-based order protections that protect against entering too many orders, executing too many contracts, and having too many orders rejected because of price protection parameters in a short time, based on parameters entered by TPHs. Specifically, the proposed rule change states each TPH must provide to the Exchange parameters for an acronym or, if the TPH requests, a login,\31\ for each of the following rate checks. The System will count each of the following over rolling time intervals, which the Exchange will set and announce via Regulatory Circular: --------------------------------------------------------------------------- \31\ A TPH firm may have multiple acronyms. For each Trading Permit a TPH purchases, it receives up to three log-ins (the TPH may elect to use fewer than the three). Additionally, a TPH may purchase additional bandwidth packets, each of which comes with three log- ins. The TPH determines which log-ins will be used under which acronym. While not required, TPH firms, for example, may use one acronym, or log-in, for its proprietary business and another for its customer agency business (if the firm conducts both). Additionally, TPH firms sometimes use different log-ins for different customers. Allowing TPHs to set parameters for these protection mechanisms will allow TPHs to minimize the possibility of these mechanisms from affecting multiple businesses, if they choose to set up acronyms and log-ins in a manner that keeps these business separate. --------------------------------------------------------------------------- (1) The total number of orders (of all order types) and auction responses entered and accepted by the System (``orders entered''); (2) the total number of contracts (from orders and auction responses) executed on the System, which does not count stock contracts executed as part of stock-option orders (``contracts executed''); (3) the total number of orders the System books or cancels (except orders (or any unexecuted portions) that by their terms cancel if they do not execute immediately (such as immediate-or-cancel, fill-or-kill, intermarket sweep, and market-maker trade prevention orders)) \32\ pursuant to the drill through price check parameter (as amended by this proposed rule change) in proposed Rule 6.17(a)(2) (``drill through events''); and --------------------------------------------------------------------------- \32\ As discussed above, orders (or unexecuted portions) that by their terms cancel if they do not execute immediately will be cancelled rather than rest in the book for a period of time (as proposed in this filing) pursuant to the drill through price check parameter is [sic] triggered. Because these orders will not book or be cancelled pursuant to the drill through price check parameter (but rather because of their terms), these orders will not be included in the count for the drill through event check. --------------------------------------------------------------------------- (4) the total number of orders the System cancels pursuant to the limit order price parameters in Rules 6.13, Interpretation and Policy .04(f) and (g) and 6.17(b) (``price reasonability events''). When the System determines the orders entered, contracts executed, drill through order [sic] events or price reasonability events within the applicable time interval exceeds a TPH's parameter, the System (1) rejects all subsequent incoming orders and quotes, (2) cancels all resting quotes (if the acronym or login is for a Market-Maker), and (3) for the orders entered and contracts executed checks, if the TPH requests (i.e., this part of the proposed functionality is optional), cancels resting orders (either all orders, orders with time-in-force of day, or orders entered on that trading day) for the acronym or login, as applicable. The System will not accept new orders or quotes from a restricted acronym or login, as applicable, until the Exchange receives the TPH's manual notification (in a form and manner determined by the Exchange, which will be announced by Regulatory Circular) to reactivate its ability to send orders and quotes for the acronym or login. While an acronym or login is restricted, a TPH may continue to interact with any resting orders (i.e., orders not cancelled pursuant to this protection) entered prior to its acronym or login becoming restricted, including receiving trade execution reports and canceling resting orders. While these order entry and execution rate checks are mandatory for all TPHs, the Exchange is not proposing to establish minimum or maximum values for the parameters described in (1) through (4) above. The Exchange believes this approach will give TPHs the flexibility needed to appropriately tailor these checks to their respective risk management needs. In this regard, the Exchange notes each TPH is in the best position to determine risk settings appropriate for its firm based on its trading activity and business needs. The Exchange will set the values of the time intervals; \33\ however, the Exchange believes the amount of flexibility provided to TPHs by having no minimum or maximum values, or default values, for the parameters, as well as by permitting the parameters to be set at the acronym or login level, sufficiently allows TPHs to adjust their parameter inputs to these intervals in accordance with their business models and risk management needs. --------------------------------------------------------------------------- \33\ The Exchange expects the initial time intervals for all these checks to be set at one and five minutes. The time intervals set by the Exchange will apply to all TPHs, who will not be able to change these time intervals. --------------------------------------------------------------------------- The Exchange believes these proposed order entry and execution rate checks will assist TPHs in better managing their risk when trading on C2. In particular, [[Page 76677]] the proposed rule change provides functionality that allows TPHs to set risk management thresholds for the number of orders entered or contracts executed on the Exchange during a specified period. This is similar to how other options exchanges have implemented activity-based risk management protections, and the Exchange believes this functionality will likewise benefit TPHs.\34\ Additionally, similar to QRM, which includes a parameter for the maximum number of QRM incidents that will trigger cancellation of their orders and quotes once reached, the proposed rule change includes parameters for a maximum number of orders that book or cancel pursuant to the drill through check and cancel pursuant to the limit order price check. This could occur, for example, if a system issue is causing many orders to be submitted at prices that are too far away from the market and likely erroneous; this protection will help prevent execution of these erroneous orders. --------------------------------------------------------------------------- \34\ See, e.g., International Securities Exchange, LLC (``ISE'') Rule 714(d) and MIAX Rule 519A. --------------------------------------------------------------------------- The below examples illustrate how these order entry and execution rate checks will work: Example #1--Order Entry Rate Check A TPH designates an allowable orders entered rate of 9 orders/1 minute for acronym ABC.\35\ The TPH enters three orders for acronym ABC, then enters nine additional orders one minute and thirty seconds later (for the same acronym). Because the orders entered did not exceed the TPH's designated rate for acronym ABC within one minute (the second batch of orders was entered more than one minute after the first batch of orders), acronym ABC is not restricted from submitting additional orders. Thirty seconds later, the TPH enters one additional order for acronym ABC. Entry of this order triggers the rate check because the TPH entered 10 orders in less than one minute for acronym ABC. At this time, acronym ABC becomes restricted,\36\ and the System will reject all orders (and quotes, if acronym ABC is a Market-Maker), cancel any resting quotes (if acronym ABC is a Market-Maker), and cancel resting orders (if the TPH opted to enable that functionality). The TPH must contact the Exchange to resume trading for acronym ABC. --------------------------------------------------------------------------- \35\ As noted above, the Exchange intends to initially set intervals of one minute and five minutes, so the TPH would have a separate entry rate for the five-minute interval, which would be measured in the same manner demonstrated by these examples. This is true for each of the rate checks in proposed Rule 6.17(g). \36\ Note the System accepts the tenth order entered, as the check is not triggered until the orders entered exceeds the TPH's designated rate during a one-minute interval. --------------------------------------------------------------------------- Example #2--Contracts Executed Rate Check A TPH designates an allowable contracts executed rate of 999 contracts/1 minute for acronym DEF. The TPH enters an order to buy 600 contracts for acronym DEF, which immediately executes against a resting quote offer. One minute and 15 seconds after that execution, the TPH enters an order to sell 500 contracts for acronym DEF, which immediately executes against a resting quote bid. Because the two executions did not exceed the TPH's designated rate for acronym DEF within one minute (the second execution occurred more than one minute after the first execution), acronym DEF is not restricted from submitting additional orders. Forty-five seconds after the second execution, the TPH enters an order to buy 500 contracts for acronym DEF, which immediately executes against a resting sell order. Execution of this third order triggers the rate check because the TPH executed 1,000 contracts in less than one minute for acronym DEF. At this time, acronym DEF becomes restricted,\37\ and the System will reject all orders (and quotes, if acronym DEF is a Market-Maker), cancel any resting quotes (if acronym DEF is a Market-Maker), and cancel resting orders (if the TPH opted to enable that functionality). The TPH must contact the Exchange to resume trading for acronym DEF. --------------------------------------------------------------------------- \37\ Note the System executes this third order, as the check is not triggered until the contracts executed exceeds the TPH's designated rate during a one-minute interval. --------------------------------------------------------------------------- Example #3--Drill Through Event Rate Check A TPH designates an allowable drill through event rate of 1 event/1 minute for acronym GHI. The ATD for the class, whose minimum increment is 0.05, is 0.10 (i.e., two minimum increments). The market for the XYZ Dec 50 call is 1.00-1.20, represented by an order for 100 contracts on each side. There are also resting orders to buy 100 at 0.90 and buy 100 at 0.80. The TPH enters a market order to sell 300 contracts for acronym GHI. One hundred contracts from the order execute against the resting order to buy 100 at 1.00 and 100 more contracts from the order execute against the resting order to buy 100 at 0.90. The System cancels the remaining 100 contracts of the order (pursuant to the drill through protection).\38\ Thirty seconds later, the market for the XYZ Jan 40 call is 2.00-2.20, represented by an order for 100 contracts on each side. There are also resting orders to sell 100 at 2.25, sell 100 at 2.30, and sell 100 at 2.40. The TPH enters a market order to buy 500 contracts for acronym GHI. One hundred contracts from the order execute against the resting order to sell 100 at 2.20, 100 more contracts from the order execute against the resting order to sell 100 at 2.25, and 100 more contracts from the order execute against the resting order to sell 100 at 2.30. The System cancels the remaining 200 contracts (pursuant to the drill through protection). This is the second instance in less than one minute of the remaining portion of an order for acronym GHI being cancelled due to the drill through protection. At this time, acronym GHI becomes restricted, and the System will reject all orders (and quotes, if acronym GHI is a Market-Maker), and cancel any resting quotes (if acronym GHI is a Market-Maker). The TPH must contact the Exchange to resume trading for acronym GHI. --------------------------------------------------------------------------- \38\ This presumes the order is not eligible for HAL or SAL. As discussed above, the Exchange has not activated these auctions on C2, and thus the proposed booking functionality will not be applicable on C2 upon approval of this rule filing. --------------------------------------------------------------------------- Example #4--Price Reasonability Event Rate Check A TPH designates an allowable price reasonability event rate of 1 event/1 minute for acronym JKL. The ATD for the class, whose minimum increment is 0.05, is 0.10 (i.e., two minimum increments). The market for the XYZ Dec 50 call is 1.00-1.20. The TPH enters a limit order to sell at 0.85 for acronym JKL. The System rejects the order because it is more than 0.10 below the NBB (pursuant to the limit order price parameter, as proposed to be changed). Thirty seconds later, the market for the XYZ Jan 40 call is 2.00-2.20. The TPH enters a limit order to buy at 2.40 for acronym JKL. The System rejects the order because it is more than 0.10 above the NBO (pursuant to the limit order price parameter, as proposed to be changed). This is the second instance in less than one minute of an order for acronym JKL being rejected due to the limit order price parameter. At this time, acronym JKL becomes restricted, and the System will reject all orders (and quotes, if acronym JKL is a Market-Maker), and cancel any resting quotes (if acronym JKL is a Market-Maker). The TPH must contact the Exchange to resume trading for acronym JKL. Maximum Contract Size The proposed rule change adds a maximum contract size risk control. [[Page 76678]] Specifically, proposed Rule 6.17(h) states the System will reject a TPH's incoming order or quote (including both sides of a two-sided quote) if its size exceeds the TPH's designated maximum contract size parameter. Each TPH must provide a maximum contract size for each of simple orders, complex orders, and quotes applicable to an acronym or, if the TPH requests, a login.\39\ The Exchange believes the amount of flexibility provided to TPHs by having no maximum for the contract size parameter, as well as by permitting the parameters to be set at the acronym or login level, sufficiently allows TPH to adjust their parameter inputs to these intervals in accordance with their business models and risk management needs. The Exchange believes this proposed risk control will help prevent executions of orders with size that may be potentially erroneous and mitigate risk associated with such executions. This is similar to how other options exchanges have implemented maximum contract size protections, and the Exchange believes this functionality will likewise benefit TPHs.\40\ --------------------------------------------------------------------------- \39\ For purposes of determining the contract size of an incoming order or quote, the proposed rule states the contract size of a complex order will equal the contract size of the largest option leg of the order (i.e., if the order is a stock-option order, this check will not apply to the stock leg of the order). \40\ See, e.g., MIAX Rule 519(b). --------------------------------------------------------------------------- If a TPH enters an order or quote to replace a resting order or update a resting quote, respectively, and the System rejects the incoming order or quote because it exceeds the applicable maximum contract size, the System will also cancel the resting order or any resting quote in the same series. The Exchange believes it is appropriate to reject or cancel the resting order or quote because, by submitting a replacement order or quote update because it exceeds the TPH's maximum contract size, the TPH is implicitly instructing the Exchange to cancel the resting order or quote, respectively. Thus, even if the System rejects the replacement order or quote update, the TPH's implicit instruction to cancel the resting order or quote remains valid nonetheless. Additionally, with respect to quotes, the Exchange believes it is appropriate to reject or cancel, as applicable, both sides of a quote (whether submitted as a two-sided quote or resting, respectively) because Market-Makers generally submit two-sided quotes, as their trading strategies and risk profiles are based on the spreads of their quotes. Rejecting and cancelling, as applicable, quotes on both sides of the series is consistent with this practice. The Exchange believes cancellation of resting quotes and orders, and rejection of both sides of a two-sided quote, operate as additional safeguards that cause TPHs to re-evaluate orders and quotes before attempting to submit new orders or quotes. To the extent a TPH submits a pair of orders to the Automated Improvement Mechanism (``AIM'') \41\ or the Solicitation Auction mechanism (``SAM''),\42\ this proposed check will apply to both orders in the pair. If the System rejects either order in the pair, then the system will also cancel the paired order. It is the intent of these paired orders to execute against each other. Thus, the Exchange believes it is appropriate to reject both orders if one does not satisfy the maximum contract size check to be consistent with the intent of the submitting TPH. Notwithstanding the foregoing, with respect to A:AIR \43\ orders, if the System rejects the agency order pursuant to the maximum contract size check, then the System will also reject the contra-side order. However, if the System rejects the contra-side order pursuant to this check, the System will accept the agency order (assuming it satisfies the check). The purpose of the A:AIR contingency provides the opportunity for the agency order (which is a customer of the submitting TPH) to execute despite not entering an AIM auction pursuant to which the order may execute against a facilitation or solicitation order of the TPH. The Exchange believes the proposed rule change is consistent with that contingency. --------------------------------------------------------------------------- \41\ See Rule 6.51 for a description of the AIM auction process. \42\ See Rule 6.52 for a description of the SAM auction process. \43\ See Rule 6.51, Interpretation and Policy .10 for a description of the A:AIR functionality. --------------------------------------------------------------------------- Kill Switch The Exchange proposes to adopt a kill switch in proposed Rule 6.17(i). The kill switch will be an optional tool allowing a TPH to send a message to the System to, or contact the Exchange Help Desk to request that the Exchange, cancel all its resting quotes (if the acronym or login is for a Market-Maker), resting orders (either all orders, orders with time-in-force of day, or orders entered on that trading day), or both for an acronym or login. The System will send a TPH an automated message when the Exchange has processed a kill switch request for any acronym or login. Once a TPH initiates the kill switch for an acronym or login, the System rejects all subsequent incoming orders and quotes for the acronym or login, as applicable. The System will not accept new orders or quotes from a restricted acronym or login until the Exchange receives the TPH's manual notification (in a form and manner determined by the Exchange, which will be announced by Regulatory Circular) to reactivate its ability to send orders and quotes for the acronym or login. While an acronym or login is restricted, a TPH may continue to interact with any resting orders (i.e., orders not cancelled pursuant to the kill switch) entered prior to its acronym or login becoming restricted, including receiving trade execution reports and canceling resting orders. The proposed kill switch will provide TPHs with a powerful risk management tool for immediate control of their order and quote activity. It will offer TPHs a means to control their exposure through an interface not dependent on the integrity of their own systems, should they experience any type of system failure. This is similar to how other options exchanges have implemented kill switches, and the Exchange believes this functionality will likewise benefit TPHs.\44\ --------------------------------------------------------------------------- \44\ See, e.g., BOX Options Exchange LLC (``BOX'') Rule 7280 and PHLX Rule 1019(b). --------------------------------------------------------------------------- QRM Mechanism The proposed rule change amends the QRM mechanism in Rule 8.12. QRM is functionality that automatically cancels a Market-Maker's quotes when certain parameter settings are triggered. Specifically, a Market- Maker may establish a (1) maximum number of contracts, (2) a maximum cumulative percentage of the original quoted size of each side of each series, and (3) the maximum number of series for which either side of the quote is fully traded that may trade within a rolling time period in milliseconds also established by the Market-Maker. When these parameters are exceeded within the time interval, the System cancels the Market-Maker's quotes in the class and other classes with the same underlying. Additionally, Rule 8.12 allows Market-Makers or TPH organizations to specify a maximum number of QRM incidents on an Exchange-wide basis. When the Exchange determines that a Market-Maker or TPH organization has reached its QRM incident limit during the rolling time interval, the System will cancel all of the Market-Maker's or TPH organization's electronic quotes and Market-Maker orders resting in the book in all option classes on the Exchange and prevent the Market-Maker or TPH organization from sending additional quotes or orders to the Exchange until the Market-Maker or TPH organization [[Page 76679]] reactivates its ability to send quotes or orders in a manner prescribed by the Exchange. This functionality allows Market-Makers to provide liquidity across potentially hundreds of options series without being at risk of executing the full cumulative size of all these quotes before being given adequate opportunity to adjust their quotes. Use of this functionality has been voluntary for Market-Makers under the rules. From a technical perspective, Market-Makers currently do not need to enter any values into the applicable fields, and thus effectively can choose not to use these tools. The Exchange proposes to amend Rule 8.12 to make it mandatory for Market-Makers to enter values for each parameter for all classes in which it enters quotes. The purpose of the proposed rule change is to prevent Market-Makers from inadvertently entering quotes without risk-management parameters. The Exchange notes all Market-Makers currently have settings for these parameters. However, it is possible that a Market-Maker could inadvertently enter quotes without populating one or more of the parameters, resulting in the Market-Maker being exposed to much more risk than it intended. The proposed rule change will prevent this from occurring. While entering values for the QRM parameters will be mandatory to prevent inadvertent exposure to risk, the Exchange notes Market-Makers who prefer to use their own risk-management systems can enter values that assure the Exchange parameters will not be triggered.\45\ Accordingly, the proposed rule change provides Market-Makers with flexibility to use their own risk management tools. The Exchange notes other exchanges make similar functionality mandatory for all Market- Makers.\46\ --------------------------------------------------------------------------- \45\ For example, a Market-Maker could set the value for the total number of contracts executed in a class at a level exceeding the total number of contracts it actually quotes in the class. \46\ See, e.g., ISE Rule 804(g). --------------------------------------------------------------------------- Order of Application of Risk Controls/Price Protections Upon approval of this rule filing, the Exchange will have various risk controls and price protection mechanisms in place applicable to quotes and orders. The following lists the ``order'' in which the System will apply these controls and mechanisms to incoming quotes and orders: Incoming Quotes Maximum contract size (proposed Rule 6.17(h)); put/call check (current Rule 6.17(d), as proposed to be amended by this rule filing); execution of quotes that lock or cross the NBBO (current Rule 6.17(e)(iii), proposed to be moved to proposed Rule 6.17(f) in this rule filing); and quote inverting NBBO (current Rule 6.17(e), as proposed to be amended by this rule filing). Note QRM may be triggered after a quote executes. Incoming Simple Limit Orders Maximum contract size (proposed Rule 6.17(h)); put/call check (current Rule 6.17(d), as proposed to be amended by this rule filing); \47\ and --------------------------------------------------------------------------- \47\ If a limit order is an order marked to cancel and replace a resting limit order, the maximum contract size check applies after the put/call check. Generally, cancel and replace orders do not modify the size of a resting order, which the System would have already determined did not exceed the TPH's maximum contract size parameter. Therefore, the Exchange believed it was reasonable to apply a price reasonability check to these orders first, as that is the order information likely being changed. --------------------------------------------------------------------------- limit order price parameter (current Rule 6.17(b), as proposed to be amended by this rule filing). Note the order entry, execution and price parameter rate checks in proposed Rule 6.17(g) and the drill through price check parameter in current Rule 6.17(a)(2) (as proposed to be amended by this rule filing) may be triggered after a limit order executes. Incoming Simple Market Orders Maximum contract size (proposed Rule 6.17(h)); market-width price check parameter (current Rule 6.17(a)(1), as proposed to be amended (nonsubstantively) by this rule filing); and put/call check (current Rule 6.17(d), as proposed to be amended by this rule filing).\48\ --------------------------------------------------------------------------- \48\ The pricing checks always apply after the maximum size check for market orders, because they apply at the time the System determines at what price these orders will execute, unlike limit orders entered with an execution price. --------------------------------------------------------------------------- Incoming Complex Orders Maximum contract size (proposed Rule 6.17(h)); limit order price parameter (current Rule 6.13, Interpretation and Policy .04(g)); debit/credit check (current Rule 6.13, Interpretation and Policy .04(c)) or buy-buy (sell-sell) strategy parameter (current Rule 6.13, Interpretation and Policy .04(d)), as applicable; maximum value acceptable price range check (current Rule 6.13, Interpretation and Policy .04(h)); market width parameter (current Rule 6.13, Interpretation and Policy .04(a)); credit-to-debit parameter (current Rule 6.13, Interpretation and Policy .04(b)); percentage distance parameter (current Rule 6.13, Interpretation and Policy .04(e)); and stock-option derived net market parameter (current Rule 6.13, Interpretation and Policy .04(f)). Note the order entry, execution and price parameter rate checks in proposed Rule 6.17(g) and the drill through price check parameter in Rule 6.17(a)(2) (as proposed to be amended by this rule filing) may be triggered after a market order executes. 2. Statutory Basis The Exchange believes the proposed rule change is consistent with the Act and the rules and regulations thereunder applicable to the Exchange and, in particular, the requirements of Section 6(b) of the Act.\49\ Specifically, the Exchange believes the proposed rule change is consistent with the Section 6(b)(5) \50\ requirements that the rules of an exchange be designed to prevent fraudulent and manipulative acts and practices, to promote just and equitable principles of trade, to foster cooperation and coordination with persons engaged in regulating, clearing, settling, processing information with respect to, and facilitating transactions in securities, to remove impediments to and perfect the mechanism of a free and open market and a national market system, and, in general, to protect investors and the public interest. Additionally, the Exchange believes the proposed rule change is consistent with the Section 6(b)(5) \51\ requirement that the rules of an exchange not be designed to permit unfair discrimination between customers, issuers, brokers, or dealers. --------------------------------------------------------------------------- \49\ 15 U.S.C. 78f(b). \50\ 15 U.S.C. 78f(b)(5). \51\ Id. --------------------------------------------------------------------------- In particular, the proposed price protection mechanisms and risk controls will protect investors and the public interest and maintain fair and orderly markets by mitigating potential risks associated with market participants entering orders and quotes at unintended prices or sizes, and risks associated with orders and quotes trading at prices that are extreme and potentially erroneous, which may likely have resulted from human or operational error. The Exchange believes amending the limit order price parameter for simple orders (current Rule 6.17(b)) to use the [[Page 76680]] NBBO (rather than the Exchange previous day's closing price or BBO) when available perfects the mechanism of a free and open market and a national market system because it would more accurately reflect the then-current market. Thus, the Exchange believes it would be a better measure to use for purposes of determining the reasonability of the prices of orders and more accurately prevent executions of limit orders at erroneous prices, which ultimately protects investors. Continued use of the Exchange's previous day's closing price or BBO, as applicable, when no NBBO is available or the NBBO is not reliable will still provide continued price protection for orders during those times. The Exchange believes those prices would be the most relevant pricing information to determine the price at which an investor may want to buy or sell within a series, and the Exchange believes it is a reasonable substitute when no NBBO is available. The Exchange believes it is appropriate to have flexibility to determine to apply a different ATD to orders entered during the pre-opening, a trading rotation, or a trading halt to reflect different market conditions during those times. Additionally, the Exchange believes it is appropriate to not apply the check to orders with a stop contingency, because the prices that trigger execution of orders with a stop condition are intended to be outside the NBBO, and nonapplicability of this check is consistent with that condition. Therefore, the Exchange believes it is unnecessary to apply this check to stop-limit orders. This flexibility and non- applicability, as applicable, will further assist the Exchange with its efforts to maintain a fair and orderly market, which will ultimately protect investors. Application of the drill through check to market and marketable limit orders (and of the market width check only to market orders) is consistent with the current Rule and applicability of those checks; the proposed rule change merely deletes the Exchange's flexibility to apply each check to market orders, marketable limit orders, or both. The proposed rule change to the drill through price check parameter (Rule 6.17(a)(2)) will benefit investors, as it describes how the System handles orders that were and were not previously exposed prior to trading at the drill through price. Additionally, the proposed rule change adds functionality to the drill through price check parameter to expose orders at the better of the NBBO or drill through price, and then rest orders (or any remaining unexecuted portions) in the book for a brief time period (not to exceed three seconds) with a price equal to the drill through price,\52\ promotes just and equitable principles of trade and benefits investors by providing an additional opportunity for execution at a price at least as good as the NBBO and that does not appear to be erroneous prior to their cancellation while continuing to protect them against execution at erroneous prices. Excluding orders that by their terms cancel if they do not immediately execute from this proposed change is consistent with the terms of those orders. In addition, the proposed rule change to apply the drill through protection to orders eligible for SAL will prevent erroneous executions of more orders, which assists the Exchange in its efforts to maintain a fair and orderly market. The proposed rule change also clarifies an order will HAL at the better of the NBBO and the drill through price to ensure an order will not be exposed at a price worse than the NBBO (this is consistent with the current HAL rule, which exposes orders at the NBBO). --------------------------------------------------------------------------- \52\ As discussed above, this functionality will not be applicable upon approval of this filing, because the Exchange has not activated HAL and SAL for any classes on C2. Unless C2 activates those auctions for a class, the drill through parameter will function in the same manner as it does today. --------------------------------------------------------------------------- The proposed rule change to permit the Exchange to share TPH- designated risk settings with Clearing TPHs that clear transactions on the TPH's behalf (proposed introductory paragraph to Rule 6.17) will permit Clearing TPHs who have a financial interest in the risk settings of TPHs with whom they have entered into a letter of authorization or letter of guarantee given by such Clearing TPHs to such TPH to better monitor and manage the potential risks assumed by Clearing TPHs. Because such Clearing TPHs bear the risk associated with Exchange transactions of that TPH, it is appropriate for the Clearing TPHs to have knowledge of what risk settings the TPH may apply within the System. This knowledge will provide Clearing TPHs with greater control and flexibility in managing their own risk tolerance and exposure and aiding Clearing TPHs in complying with the Act. Additionally, to the extent a Clearing TPH might reasonably require a TPH to provide access to its risk settings as a prerequisite to continuing to clear trades on such TPH's behalf, the Exchange's proposed rule change to share those risk settings directly with a Clearing TPH reduces the administrative burden on the TPH and ensures that Clearing TPHs are receiving information that is up to date and conforms to settings active in the System. The Exchange also notes the proposed rule change is consistent with rules of other exchanges.\53\ --------------------------------------------------------------------------- \53\ See, e.g., MIAX Rule 500; BX Chapter VI, Section 20; NYSE Arca Rule 6.2A(a); NYSE MKT Rule 902.1NY(a); and PHLX Rule 1016. --------------------------------------------------------------------------- The proposed rule change to expand the applicability of the put strike price and call underlying value check to market orders (current Rule 6.17(d)) will further assist the Exchange's efforts to maintain a fair and orderly market by mitigating the potential risks associated with additional orders trading at prices that exceed a corresponding benchmark (which may result in executions at prices that are potentially erroneous). The Exchange believes it promotes fair and orderly markets to not apply these checks to market orders executed during an opening rotation to avoid impacting the determination of the opening price (the Exchange notes separate price protections apply to orders during the opening process). The proposed rule change to the quote inverting NBBO check (current Rule 6.17(e)) benefits investors by clarifying the System does not apply those checks to orders entered when there is no NBBO (or BBO with respect to the quote inverting NBBO check) available, as there is no reliable benchmark during those times against which the System can compare quote prices. This will remove impediments to and perfect the mechanism of a free and open market because these checks would not apply to quotes during times when there is no reliable price benchmark, and thus the check would not erroneously reject otherwise acceptable quotes, which may be disruptive to Market-Makers that provide necessary liquidity to the Exchange. The proposed rule change to delete the Exchange's flexibility regarding when to apply the quote inverting NBBO check and instead state in the Rules it will not apply prior to a series opening if the series is not open on another exchange, and it will not apply during a trading halt is appropriate and consistent with the current rule. The Exchange currently does not apply the check to quotes entered during a halt and does not expect to do so. With respect to quotes entered in series prior to the opening, the Exchange believes it is appropriate to not apply the check if a series is not yet open on another exchange to avoid rejecting quotes that may be consistent with market pricing not yet available in the System. The proposed changes to the execution of quotes that lock or cross the NBBO (current Rule 6.17(e)(iii) and [[Page 76681]] proposed Rule 6.17(f)) to not apply the check when the NBBO is locked, crossed or unavailable, or to allow the Exchange to disable this check in response to a market event or market volatility in the interest of maintaining a fair and orderly market, will prevent the System from inadvertently cancelling quotes when there is no reliable measure against which to compare the price of the order to determine its reasonability, or that are not erroneously priced but rather priced to reflect potentially rapidly changing prices, respectively, which will assist with the maintenance of a fair and orderly market. The Exchange believes the proposed order entry, execution and price parameter rate checks (proposed Rule 6.17(g)) will assist with the maintenance of a fair and orderly market by establishing new activity based risk protections for orders. The Exchange currently offers QRM, a risk protection mechanism for Market-Maker quotes, which the Exchange believes has been successful in reducing Market-Maker risk, and now proposes to adopt risk protections for orders that would allow other TPHs to similarly manage their exposure to excessive risk. In particular, the proposed rule change implements four new risk protections based on order entry and execution rates as well as rates of orders that trigger the drill through or price reasonability parameters. The Exchange believes these new protections would enable TPHs to better manage their risk when trading on the Exchange by limiting their risk exposure when systems or other issues result in orders being entered or executed, as well as executed at extreme prices, at rates that exceed predefined thresholds. In today's market, the Exchange believes robust risk management is becoming increasingly more important for all TPHs. The proposed rule change would provide an additional layer or risk protection for TPHs. In particular, these rate checks are designed to reduce risk associated with system errors or market events that may cause TPHs to send a large number of orders, receive multiple, automatic executions, or execute a large number of orders at extreme and potentially erroneous prices, before they can adjust their exposure in the market. The proposed order entry and execution rate checks are similar to risk management functionality provided by other options exchanges.\54\ While the order entry and contracts executed rate checks apply to all TPHs, it is optional for TPHs to have resting orders (or certain subcategories of resting orders) cancelled when a rate check is triggered and an acronym or login becomes restricted. --------------------------------------------------------------------------- \54\ See, e.g., ISE Rule 714(d) and MIAX Rule 519A. --------------------------------------------------------------------------- The proposed maximum contract size risk control (proposed Rule 6.17(h)) is designed to help TPHs avoid potential submission of erroneously sized orders on the Exchange. Similar to functionality intended to protect against orders and quotes executing at unintended prices, this proposed functionality will assist in the maintenance of a fair and orderly market and protect investors by rejecting orders and quotes that are ``too large'' to prevent executions at unintended sizes and mitigate risks associated with such executions that are potentially erroneous. The Exchange believes the additional risk control feature to reject or cancel the resting order or quote when an incoming replacement order or quote update is rejected pursuant to this proposed risk control is appropriate because, by submitting a replacement order or quote update, the TPH is implicitly instructing the Exchange to cancel the resting order or quote, respectively. Additionally, the Exchange believes it is appropriate to reject or cancel, as applicable, both sides of a quote because Market-Makers generally submit two-sided quotes, as their trading strategies and risk profiles are based on spreads of their quotes, and rejecting and cancelling, as applicable, both sides of a quote is consistent with this practice. The Exchange believes cancellation of resting quotes and orders, and rejection of both sides of a quote, operate as additional safeguards that cause TPHs to re-evaluate orders and quotes before attempting to submit new orders or quotes. This will further protect against erroneous trades, which protects investors. The Exchange also believes the proposed rule change regarding how the proposed check will apply to AIM and SAM orders is reasonable, as the proposed rule change is consistent with the contingencies attached to those types of orders. With respect to the proposed order entry, execution and price parameter rate checks and maximum contract size check (as well as the existing QRM functionality), the Exchange believes it is appropriate to not have minimum or maximum values, or default values, for the parameters, to provide sufficient flexibility to TPHs to adjust their parameter inputs in accordance with their business and risk management needs. The Exchange believes price protection mechanisms benefits its market and the options industry as a whole, however, ultimately these mechanisms primarily protect TPHs against erroneous executions of their orders and quotes. C2 appreciates the parameter settings determine whether these protections will be meaningful. Based on discussions with TPHs regarding its current and proposed package of risk controls and price protection mechanisms, the Exchange understands TPHs support the implementation of price protection mechanisms such as these and expects TPHs to input settings that are meaningful so they can take full advantage of the benefits these mechanisms are intended to provide. The proposed kill switch (proposed Rule 6.17(i)) is an optional tool offered to all TPHs. The Exchange represents the proposed kill switch will operate consistently with the firm quote obligations of a broker-dealer pursuant to Rule 602 of Regulation NMS and the functionality is not mandatory. Specifically, any interest executable against a TPH's quotes and orders received by the Exchange prior to the time the kill switch is processed by the Exchange will automatically execute at the price up to the TPH's size. The kill switch message will be accepted by the System in the order of receipt in the queue and will be processed in that order so that interest already in the System will be processed prior to the kill switch message. A Market-Maker's utilization of the kill switch, and subsequent removal of its quotes, does not diminish or relieve the Market-Maker of its obligation to provide continuous two-sided quotes. Market-Makers will continue to be required to provide continuous two-sided quotes on a daily basis, and a Market-Maker's utilization of the kill switch will not prohibit the Exchange from taking disciplinary action against the Market-Maker for failing to meet the continuing quoting obligation each trading day. All TPHs may determine whether a kill switch cancels resting quotes, resting orders (or certain subcategories of resting orders), or both. The Exchange also notes the proposed rule change is consistent with rules of other exchanges.\55\ --------------------------------------------------------------------------- \55\ See, e.g., BOX Rule 7280 (b) and PHLX Rule 1019(b). --------------------------------------------------------------------------- The Exchange believes requiring Market-Makers to enter values into the risk parameters of the QRM mechanism (current Rule 8.12) will not be unreasonably burdensome, as all Market-Makers currently utilize the functionality. Additionally, the proposed rule change will assist Market-Makers in reducing their risk of inadvertently entering quotes without populating the risk parameters. [[Page 76682]] Reducing this risk will enable Market-Makers to enter quotations with larger size, which in turn will benefit investors through increased liquidity for the execution of their orders. Such increased liquidity benefits investors because they receive better prices and because it lowers volatility in the options market. While entering values for the QRM parameters will be mandatory to prevent inadvertent exposure to risk, the Exchange notes Market-Makers who prefer to use their own risk-management systems can enter values that assure the Exchange parameters will not be triggered. Accordingly, the proposed rule change provides Market-Makers with flexibility to use their own risk management tools. The Exchange notes other exchanges make similar functionality mandatory for all Market-Makers.\56\ --------------------------------------------------------------------------- \56\ See, e.g., ISE Rule 804(g). --------------------------------------------------------------------------- The individual firm benefits of enhanced risk protections flow downstream to counterparties both at the Exchange and at other options exchanges, which increases systemic protections as well. The Exchange believes these risk protections will allow TPHs to enter orders and quotes with reduced fear of inadvertent exposure to excessive risk, which will benefit investors through increased liquidity for the execution of their orders, thereby protecting investors and the public interest. Without adequate risk management tools, such as those proposed in this filing, TPHs could reduce the amount of order flow and liquidity they provide. Such actions may undermine the quality of the markets available to customers and other market participants. Accordingly, the proposed rule change is designed to encourage TPHs to submit additional order flow and liquidity to the Exchange, thereby removing impediments to and perfecting the mechanisms of a free and open market and a national market system and, in general, protecting investors and the public interest. In addition, providing TPHs with more tools for managing risk will facilitate transactions in securities because, as noted above, TPHs will have more confidence protections are in place that reduce the risks from potential system errors and market events. As a result, the new functionality as the potential to promote just and equitable principles of trade. The Exchange notes TPHs must be mindful of their obligations to seek best execution of orders handled on an agency basis. Decisions to use the optional functionality described in this filing (i.e., cancellation of orders when an acronym or log-in becomes restricted after exceeding the orders entered or contracts executed rate, cancellation of orders upon initiation of a kill switch), and decisions on values of parameters (i.e., parameters for the orders entered, contracts executed and price parameter rate check, maximum contract size check), must be made consistent with this duty. B. Self-Regulatory Organization's Statement on Burden on Competition C2 does not believe that the proposed rule change will impose any burden on competition that is not necessary or appropriate in furtherance of the purposes of the Act. The proposed rule change adds price protection mechanisms and risk controls for orders and quotes of all Trading Permit Holders submitted to C2 to help further prevent potentially erroneous executions, which benefits all market participants. These mechanisms and controls apply to orders of all TPHs, and quotes of all Market-Makers, in the same manner. The proposed rule changes related to the quote inverting NBBO check, the execution of quotes that lock or cross the NBBO check, and QRM apply only to Market-Makers because only Market-Makers may submit quotes under the Rules, and because similar protections applicable to orders are in place or also proposed in this rule filing. Additionally, the Exchange believes these types of protection for Market-Makers are appropriate given their unique role in the market and may encourage Market-Makers to quote tighter and deeper markets, which will increase liquidity and enhance competition, given the additional protection these price checks will provide. The Exchange believes the proposed rule change would provide market participants with additional protection from risks related to erroneous executions. Certain of the proposed protections are similar to those available on other exchanges.\57\ --------------------------------------------------------------------------- \57\ See, e.g., ISE Rule 714(d) and MIAX Rule 519A (order entry and execution rate checks); and MIAX Rule 519(b) (order contract size). --------------------------------------------------------------------------- While the proposed rule change makes entry of parameters into the QRM mechanism mandatory, the Exchange notes all Market-Makers currently avail themselves of this mechanism today. Additionally, the Exchange believes the use of QRM will prevent the inadvertent entry of quotes without risk-management parameters. Market-Makers who prefer to use their own risk-management systems can enter out-of-range values so the Exchange-provided parameters will not be triggered and can function as back-up protection. While entering values for the QRM parameters will be mandatory to prevent inadvertent exposure to risk, the Exchange notes Market-Makers who prefer to use their own risk-management systems can enter values that assure the Exchange parameters will not be triggered. Accordingly, the proposed rule change provides Market-Makers with flexibility to use their own risk management tools. The Exchange notes other exchanges make similar functionality mandatory for all Market-Makers.\58\ --------------------------------------------------------------------------- \58\ See, e.g., ISE Rule 804(g). --------------------------------------------------------------------------- With respect to the proposed kill switch functionality, all TPHs may avail themselves of the kill switch, which functionality is optional. The proposed rule change is intended to protect TPHs in the event they experience a systems issue or unusual or unexpected market activity that would require them to withdraw from the market to protect investors. The ability to control risk at either the acronym or login level will permit a TPH to protect itself from inadvertent exposure to excessive risk at each level. Reducing such risk will enable TPHs to enter quotes and orders with protection against inadvertent exposure to excessive risk, which in turn will benefit investors through increased liquidity for the execution of their orders. Such increased liquidity benefits investors because they may receive better prices and because it may lower volatility in the options market. Additionally, the proposed kill switch functionality is similar to that available on other exchanges.\59\ --------------------------------------------------------------------------- \59\ See, e.g., BOX Rule 7280(b) and PHLX Rule 1019(b). --------------------------------------------------------------------------- The proposed rule change to permit the Exchange to share TPH- designated risk settings with Clearing TPHs that clear transaction on behalf of the TPH is not designed to address any competitive issues and does not pose any undue burden on non-Clearing TPHs because, unlike Clearing TPHs, non-Clearing TPHs do not guarantee the execution of transactions on the Exchange. The proposed rule change applies the same to all TPHs and Clearing TPHs. Any TPH that does not wish to have the Exchange share designated risk settings with its Clearing TPHs could avoid this by becoming a clearing member of the Clearing Corporation. The Exchange notes other exchanges' rules permit sharing of these settings with clearing members.\60\ --------------------------------------------------------------------------- \60\ See, e.g., MIAX Rule 500; BOX Chapter VI, Section 20; NYSE Arca Rule 6.2A(a); NYSE MKT Rule 901.1NY(a); and PHLX Rule 1016 (sharing TPH-designated risk settings). --------------------------------------------------------------------------- [[Page 76683]] The individual firm benefits of enhanced risk protections flow downstream to counterparties both at the Exchange and at other options exchanges, which increases systemic protections as well. The Exchange believes these risk protections will allow TPHs to enter orders and quotes with reduced fear of inadvertent exposure to excessive risk, which will benefit investors through increased liquidity for the execution of their orders. Without adequate risk management tools, such as those proposed in this filing, TPHs could reduce the amount of order flow and liquidity they provide. Such actions may undermine the quality of the markets available to customers and other market participants. Accordingly, the proposed rule change is designed to encourage TPHs to submit additional order flow and liquidity to the Exchange, which may ultimately promote competition. In addition, providing TPHs with more tools for managing risk will facilitate transactions in securities because, as noted above, TPHs will have more confidence protections are in place that reduce the risks from potential system errors and market events. Based on discussions with TPHs regarding its current and proposed package of risk controls and price protection mechanisms, the Exchange understands TPHs support the implementation of price protection mechanisms such as these and expects TPHs to input settings that are meaningful so they can take full advantage of the benefits these mechanisms are intended to provide. C. Self-Regulatory Organization's Statement on Comments on the Proposed Rule Change Received From Members, Participants, or Others The Exchange neither solicited nor received comments on the proposed rule change. III. Date of Effectiveness of the Proposed Rule Change and Timing for Commission Action Within 45 days of the date of publication of this notice in the Federal Register or within such longer period up to 90 days (i) as the Commission may designate if it finds such longer period to be appropriate and publishes its reasons for so finding or (ii) as to which the Exchange consents, the Commission will: A. By order approve or disapprove such proposed rule change, or B. institute proceedings to determine whether the proposed rule change should be disapproved. IV. Solicitation of Comments Interested persons are invited to submit written data, views, and arguments concerning the foregoing, including whether the proposed rule change is consistent with the Act. Comments may be submitted by any of the following methods: Electronic Comments Use the Commission's Internet comment form (http://www.sec.gov/rules/sro.shtml); or Send an email to [email protected]. Please include File Number SR-C2-2016-020 on the subject line. Paper Comments Send paper comments in triplicate to Secretary, Securities and Exchange Commission, 100 F Street NE., Washington, DC 20549-1090. All submissions should refer to File Number SR-C2-2016-020. This file number should be included on the subject line if email is used. To help the Commission process and review your comments more efficiently, please use only one method. The Commission will post all comments on the Commission's Internet Web site (http://www.sec.gov/rules/sro.shtml). Copies of the submission, all subsequent amendments, all written statements with respect to the proposed rule change that are filed with the Commission, and all written communications relating to the proposed rule change between the Commission and any person, other than those that may be withheld from the public in accordance with the provisions of 5 U.S.C. 552, will be available for Web site viewing and printing in the Commission's Public Reference Room, 100 F Street NE., Washington, DC 20549, on official business days between the hours of 10:00 a.m. and 3:00 p.m. Copies of the filing also will be available for inspection and copying at the principal office of the Exchange. All comments received will be posted without change; the Commission does not edit personal identifying information from submissions. You should submit only information that you wish to make available publicly. All submissions should refer to File Number SR-C2-2016-020, and should be submitted on or before November 25, 2016. For the Commission, by the Division of Trading and Markets, pursuant to delegated authority.\61\ --------------------------------------------------------------------------- \61\ 17 CFR 200.30-3(a)(12). --------------------------------------------------------------------------- Brent J. Fields, Secretary. [FR Doc. 2016-26510 Filed 11-2-16; 8:45 am] BILLING CODE 8011-01-P
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| FR Citation | 81 FR 76671 |