| Page Range | 79013-79019 | |
| FR Document | 2016-27193 |
[Federal Register Volume 81, Number 218 (Thursday, November 10, 2016)] [Notices] [Pages 79013-79019] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2016-27193] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0483; FRL-9952-84] Certain New Chemicals; Receipt and Status Information for August 2016 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from August 1, 2016 to August 31, 2016. This document also corrects the docket number of the previously published second Certain New Chemicals; Receipt and Status Information for June 2016 in the Federal Register of October 27, 2016. DATES: Comments identified by the specific case number provided in this document, must be received on or before December 12, 2016. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0483, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. [[Page 79014]] B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the agency taking? This document provides receipt and status reports, which cover the period from August 1, 2016 to August 31, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory, please go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 57 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. III. What is the agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a notice before initiating the activity. TSCA furthermore prohibits such manufacturing or processing from commencing until EPA has conducted a review of the notice, made an appropriate determination on the notice, and taken such actions as are required in association with that determination (15 U.S.C. 2604(a)(1)(B)(ii)). Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 57 PMNs received by EPA during this period, the table provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From August 1, 2016 to August 31, 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Case No. Received date notice end Manufacturer importer Use Chemical date -------------------------------------------------------------------------------------------------------------------------------------------------------- P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Corrosion inhibitor for (S) Undecanoic acid, penetrating or spray oils. branched. [[Page 79015]] P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Chemical intermediate for (S) Undecanoic acid, ester production for oil branched. additives and lubricants. P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Corrosion inhibitor for (S) Undecanoic acid, gear oils. branched. P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Chemical intermediate (S) Undecanoic acid, (neutralized) for use as a branched. corrosion inhibitor. P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Corrosion inhibitor for (S) Undecanoic acid, hydraulic fluids. branched. P-16-0502..................... 8/1/2016 10/30/2016 CBI...................... (S) Export.................... (S) Undecanoic acid, branched. P-16-0503..................... 8/2/2016 10/31/2016 Allnex USA Inc........... (S) Site limited intermediate (G) Fatty acids, polymers for production of a deck with alkanoic acid, stain coating resin additive. substituted carbomonocycle, alkyl peroxide-initiated. P-16-0504..................... 8/2/2016 10/31/2016 Colonial Chemical, Inc... (S) Fire fighting foams....... (S) Amides, soya, N-[- 3(dimethylamino)propyl], N- oxides. P-16-0504..................... 8/2/2016 10/31/2016 Colonial Chemical, Inc... (S) Household surfactant (S) Amides, soya, N-[- formulas. 3(dimethylamino)propyl], N- oxides. P-16-0505..................... 8/2/2016 10/31/2016 CBI...................... (S) Polymeric resin for (S) Poly[oxy(methyl- 1, 2- ultraviolet (uv) curable ethanediyl) ] , ?- (1- oxo- acrylates. 2- propen- 1- yl) - ?- [(1- oxo- 2- propen- 1- yl) oxy]. P-16-0506..................... 8/31/2016 11/29/2016 CBI...................... (G) Filler.................... (G) Organosilane modified alumina. P-16-0507..................... 8/3/2016 11/1/2016 Lamberti USA Inc......... (G) Additive for industrial (G) Hydroxy acids, polymer, purposes. reaction product with polyethyleneimine. P-16-0509..................... 8/5/2016 11/3/2016 CBI...................... (G) For packaging application. (G) Modified evoh. P-16-0510..................... 8/5/2016 11/3/2016 International Flavors and (S) The notified polymer (S) Oxirane, 2-methyl-, Fragrances Inc. functions to reduce malodors. polymer with oxirane, bis[2- It will be sold to industrial [(1-oxo-2-propen-1- and commercial customers for yl)amino]propyl] ether. their incorporation into industrial, commercial, and household consumer products such as floor cleaners, cat litters, fabric refresher sprays, Etc. P-16-0511..................... 8/15/2016 11/13/2016 CBI...................... (G) Oilfield additive......... (S) Benzenesulfonic acid, 4 - C10 - 13-sec-alkyl derivs., compds. with ethanolamine. P-16-0512..................... 8/9/2016 11/7/2016 CBI...................... (S) Component of a ultraviolet (G) Fatty acid dimers, curable printing inks. polymer with acrylic acid and pentaerythritol reaction products. P-16-0513..................... 8/8/2016 11/6/2016 CBI...................... (S) Intermediate for further (G) Alkylphenol. reaction. P-16-0514..................... 8/9/2016 11/7/2016 CBI...................... (G) Catalyst.................. (G) Mixed metal oxide. P-16-0515..................... 8/9/2016 11/7/2016 CBI...................... (G) Additive.................. (G) Diamine substituted arylimidazole. P-16-0516..................... 8/12/2016 11/10/2016 CBI...................... (S) Intermediate for pesticide (G) Aminohalocarboxylate. manufacture. P-16-0517..................... 8/12/2016 11/10/2016 CBI...................... (G) Monomer for polymer (G) Methacrylic acid ester. application. P-16-0518..................... 8/12/2016 11/10/2016 CBI...................... (G) Adhesion resin............ (G) Polyalkylether polyester P-16-0519..................... 8/12/2016 11/10/2016 CBI...................... (G) Adhesion resin............ (G) Polyalkylether polyester. P-16-0520..................... 8/15/2016 11/13/2016 CBI...................... (G) The anticipated use is as (G) 2-propenoic acid, polymer a deposit control agent and with N-(alkyl)-2propenamide, pigment dispersant. sodium alkyl alkene sulfonate (1:1) and sodium 2- methyl-2-[(1-oxo-2-propen-1- yl) amino]-1- propanesulfonate (1:1), peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)-initiated. [[Page 79016]] P-16-0521..................... 8/15/2016 11/13/2016 CBI...................... (G) The anticipated use is as (G) 2-propenoic acid, polymer a deposit control agent and with N-(alkyl)-2propenamide, pigment dispersant. sodium alkyl alkene sulfonate (1:1) and sodium 2- methyl-2-[(1-oxo-2-propen-1- yl) amino]-1- propanesulfonate (1:1), potassium salt, peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)-initiated. P-16-0522..................... 8/15/2016 11/13/2016 CBI...................... (G) The anticipated use is as (G) 2-propenoic acid, polymer a deposit control agent and with N-(alkyl)-2propenamide, pigment dispersant. sodium alkyl alkene sulfonate (1:1) and sodium 2- methyl-2-[(1-oxo-2-propen-1- yl) amino]-1- propanesulfonate (1:1), sodium salt, peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)-initiated. P-16-0523..................... 8/15/2016 11/13/2016 CBI...................... (G) The anticipated use is as (G) 2-propenoic acid, polymer a deposit control agent and with N-(alkyl)-2propenamide, pigment dispersant. sodium alkyl alkene sulfonate (1:1) and sodium 2- methyl-2-[(1-oxo-2-propen-1- yl) amino]-1- propanesulfonate (1:1), ammonium salt, peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)-initiated. P-16-0524..................... 8/18/2016 11/16/2016 Miwon North America, Inc. (S) Resin for industrial (G) Acrylated resin. coating. P-16-0525..................... 8/18/2016 11/16/2016 CBI...................... (G) Ingredient for ink, (G) Polyester benzoate. coating and adhesive formulations. P-16-0526..................... 8/18/2016 11/16/2016 CBI...................... (G) Coatings application...... (G) Fluorinated alkyl derivative. P-16-0526..................... 8/18/2016 11/16/2016 CBI...................... (G) Electronic cleaner........ (G) Fluorinated alkyl derivative. P-16-0526..................... 8/18/2016 11/16/2016 CBI...................... (G) Printing application...... (G) Fluorinated alkyl derivative. P-16-0527..................... 8/19/2016 11/17/2016 CBI...................... (S) Uv absorber for plastic (G) Bis[[(diphenyl- articles. heteroaryl)-substituted phenoxy]ethyl] dodecanedioate. P-16-0528..................... 8/23/2016 11/21/2016 Shell Chemical LP........ (S) Coatings.................. (S) Hydrocarbons, C16 - 22, branched and linear. P-16-0528..................... 8/23/2016 11/21/2016 Shell Chemical LP........ (S) Cleaning fluids........... (S) Hydrocarbons, C16 - 22, branched and linear. P-16-0528..................... 8/23/2016 11/21/2016 Shell Chemical LP........ (S) Sold as intermediate...... (S) Hydrocarbons, C16 - 22, branched and linear. P-16-0528..................... 8/23/2016 11/21/2016 Shell Chemical LP........ (S) Agrochemicals............. (S) Hydrocarbons, C16 - 22, branched and linear. P-16-0528..................... 8/23/2016 11/21/2016 Shell Chemical LP........ (S) Metal workings fluids/ (S) Hydrocarbons, C16 - 22, Rolling oils. branched and linear. P-16-0529..................... 8/24/2016 11/22/2016 CBI...................... (S) Personal care products.... (G) Polyalkyl methylsiloxane. P-16-0529..................... 8/24/2016 11/22/2016 CBI...................... (G) Textile treatment......... (G) Polyalkyl methylsiloxane. P-16-0529..................... 8/24/2016 11/22/2016 CBI...................... (G) Commercial polish......... (G) Polyalkyl methylsiloxane. P-16-0530..................... 8/25/2016 11/23/2016 CBI...................... (S) Concrete and Stone coating (S) 2-propenoic acid, 2- methyl, 2-(dimethylamino) ethyl ester, polymer with ethyl 2-propenoate, 2- hydroxyethyl m2-propenoate and methyl 2-methyl 2- propenoate, acetate salt. P-16-0530..................... 8/25/2016 11/23/2016 CBI...................... (S) Concrete and Stone coating (S) 2-propenoic acid, 2- methyl-, 2-(dimethylamino) ethyl ester, polymer with ethyl 2-propenoate, 2- hydroxyethyl 2-propenoate and methyl 2-methyl 2- propenoate, acetate (salt). P-16-0531..................... 8/24/2016 11/22/2016 CBI...................... (G) Additive for use in (G) Alkyloxy propanamine. mineral processing. P-16-0532..................... 8/25/2016 11/23/2016 CBI...................... (G) Ingredient used in (G) Substituted fertilizer manufacturing. heteromonocycle. P-16-0533..................... 8/25/2016 11/23/2016 CBI...................... (G) The blended final product (G) Ethanaminium, alkyl-, is used as a cleaning agent salt with aromatic triazole. for electronics manufacturing. [[Page 79017]] P-16-0534..................... 8/31/2016 11/29/2016 CBI...................... (G) Component of ink.......... (G) Alkyl alkenoic acid, polymer with alkenylcarbomonocycle telomer with substituted alkanoic acid hydroxyl alkyl substituted alkenyl substituted alkyl ester, polyalkylene glycol alkyl ether alkyl alkenoate, dialkylene glycol diheteromonocyclic ether and alkylcarbomonocyclic alkenoate, metal salt. P-16-0535..................... 8/31/2016 11/29/2016 CBI...................... (G) Component of ink.......... (G) Alkyl alkenoic acid, polymer with alkenylcarbomonocycle telomer with substituted alkanoic acid hydroxyl alkyl substituted alkenyl substituted alkyl ester, alkanediol diheteromonocyclic ether, polyalkylene glycol alkyl ether alkyl alkenoate and alkylcarbomonocyclic alkenoate, metal salt. P-16-0536..................... 8/31/2016 11/29/2016 CBI...................... (G) Component of ink.......... (G) Alkyl alkenoic acid, polymer with bis heteromonocyclic substituted alkyl carbomonocycle, alkenylcarbomonocycle telomer with substituted alkanoic acid hydroxyl alkyl substituted alkenyl substituted alkyl ester, polyalkylene glycol alkyl ether alkyl alkenoate and alkylcarbomonocyclic alkenoate, metal salt. P-16-0538..................... 8/26/2016 11/24/2016 Omnium International..... (S) PMN substance is a (S) 9-octadecenoic acid (9z)- component in a metalworking , compound with N- fluid preparation imported cyclohexylcyclohexanamine into the U.S. (1:1). P-16-0539..................... 8/26/2016 11/24/2016 CBI...................... (G) Photolithography.......... (G) Organic sulfonate compound. P-16-0540..................... 8/29/2016 11/27/2016 CBI...................... (G) Polymeric film former for (G) Diphenolic compound, coatings. polymer with 2- (chloromethyl)oxirane and 4,4'-methylenebis[di-alkyl- substituted phenol]. P-16-0541..................... 8/29/2016 11/27/2016 Specialty Organics, Inc.. (S) Adhesive for wood particle/ (S) Soybean meal, reaction Chip/Fiber board. products with phosphoric trichloride. P-16-0542..................... 8/30/2016 11/28/2016 CBI...................... (G) Chemical/Polymer Modifier. (G) Polydimethylsiloxane with functional end-caps. P-16-0543..................... 8/31/2016 11/29/2016 CBI...................... (G) Battery ingredient........ (G) Halogenophosphoric acid metal salt. P-16-0544..................... 8/31/2016 11/29/2016 Guardian Industries Corp. (S) Additive to influence (S) Flue dust, glass- melting temperature of raw manufacturing materials and physical desulfurization, calcium characteristics of the final hydroxide-treated. product during the Definition: The dust produced manufacture of flat glass. form the flue gas exhaust cleaning of a glass manufacturing process followed by treatment with hydrated lime. It consists primarily of caso4 and ca(co3). P-16-0544..................... 8/31/2016 11/29/2016 Guardian Industries Corp. (S) Additive to influence (S) Flue dust, glass-manufg. melting temperature of raw desulfurization, calcium materials and physical hydroxide-treated. characteristics of the final Definition: The dust produced product during the form the flue gas exhaust manufacture of flat glass. cleaning of a glass manufacturing process followed by treatment with hydrated lime. It consists primarily of caso4 and ca(co3). -------------------------------------------------------------------------------------------------------------------------------------------------------- [[Page 79018]] For the 46 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 2--NOCs Received From August 1, 2016 to August 31, 2016 ---------------------------------------------------------------------------------------------------------------- Commencement Case No. Received date date Chemical ---------------------------------------------------------------------------------------------------------------- P-04-0641............................ 8/16/2016 8/14/2016 (G) Polyetherpolyol polymer with aromatic dialkylamine. P-04-0641............................ 8/16/2016 8/15/2016 (G) Polyetherpolyol polymer with aromatic dialkylamine. P-06-0458............................ 8/29/2016 5/21/2013 (S) 13-docosenoic acid, magnesium salt, (13z)-. P-06-0458............................ 8/29/2016 5/22/2013 (S) 13-docosenoic acid, magnesium salt, (13z)-. P-12-0190............................ 8/11/2016 7/10/2016 (G) Fatty acid ester. P-12-0190............................ 8/11/2016 7/11/2016 (G) Fatty acid ester. P-12-0249............................ 8/23/2016 7/12/2012 (S) Canola oil, reaction product with 1-butene. P-12-0249............................ 8/23/2016 7/13/2012 (S) Canola oil, reaction product with 1-butene. P-12-0250............................ 8/23/2016 7/18/2012 (S) Canola oil, reaction products with 1-butene, distillation residues. P-12-0250............................ 8/23/2016 7/19/2012 (S) Canola oil, reaction products with 1-butene, distillation residues. P-12-0251............................ 8/23/2016 8/14/2012 (S) Canola oil, reaction products with 1-butene, distillation residues, methyl esters. P-12-0251............................ 8/23/2016 8/15/2012 (S) Canola oil, reaction products with 1-butene, distillation residues, methyl esters. P-12-0382............................ 8/12/2016 7/13/2016 (S) Alkenes, C20 - 24 a-, reaction products with 1-hexacosene, 1- octacosene, 1-octadecene and polyethylene distn. residues. P-12-0382............................ 8/12/2016 7/14/2016 (S) Alkenes, c20 - 24 a-, reaction products with 1-hexacosene, 1- octacosene, 1-octadecene and polyethylene distn. residues. P-12-0513............................ 8/26/2016 7/15/2016 (G) Aromatic dicarboxylic acid, polymer with dialkyl alkanediol, alkyl-(hydroxyalkyl)-alkanediol, dicarboxylic acid, heteropolcyclic anhydride, alkanetriol, hydroxy- [(oxoalkyl)oxy]alkyl ester. P-12-0513............................ 8/26/2016 7/16/2016 (G) Aromatic dicarboxylic acid, polymer with dialkyl alkanediol, alkyl-(hydroxyalkyl)-alkanediol, dicarboxylic acid, heteropolcyclic anhydride, alkanetriol, hydroxy- [(oxoalkyl)oxy]alkyl ester. P-14-0260............................ 8/29/2016 8/3/2016 (S) Propene, 2-bromo-3,3,3-trifluoro- . P-14-0260............................ 8/29/2016 8/4/2016 (S) Propene, 2-bromo-3,3,3-trifluoro- . P-14-0331............................ 8/1/2016 7/17/2016 (G) 2-propenoic acid, 2-methyl-, octadecyl ester, polymer with butyl 2-propenoate and alkyl lactam. P-14-0331............................ 8/1/2016 7/18/2016 (G) 2-propenoic acid, 2-methyl-, octadecyl ester, polymer with butyl 2-propenoate and alkyl lactam. P-14-0373............................ 8/6/2016 8/3/2016 (S) Neononanoic acid, ethenyl ester, polymer with butyl 2-methyl-2- propenoate, butyl 2-propenoate, ethenylbenzene, 2-hydroxyethyl 2- methyl-2-propenoate, methyl 2-methyl- 2-propenoate and rel-(1r, 2r, 4r)- 1,7,7-trimethylbicyclo [2.2.1]heptyl- 2-yl 2-methyl-2-propenoate. P-14-0373............................ 8/6/2016 8/4/2016 (S) Neononanoic acid, ethenyl ester, polymer with butyl 2-methyl-2- propenoate, butyl 2-propenoate, ethenylbenzene, 2-hydroxyethyl 2- methyl-2-propenoate, methyl 2-methyl- 2-propenoate and rel-(1r, 2r, 4r)- 1,7,7-trimethylbicyclo [2.2.1]heptyl- 2-yl 2-methyl-2-propenoate. P-14-0479............................ 8/17/2016 6/28/2016 (S) Carbonic acid, dimethyl ester, polymer with 1,4- diisocyanatobenzene, 1,6-hexanediol, 1,5-pentanediol and 2,2'-[1,?4- phenylenebis(oxy)]bis[ethanol]. P-14-0479............................ 8/17/2016 6/29/2016 (S) Carbonic acid, dimethyl ester, polymer with 1,4- diisocyanatobenzene, 1,6-hexanediol, 1,5-pentanediol and 2,2'-[1,?4- phenylenebis(oxy)]bis[ethanol]. P-14-0851............................ 8/19/2016 7/24/2016 (G) Polyurethane. P-14-0851............................ 8/19/2016 7/25/2016 (G) Polyurethane. P-14-0852............................ 8/19/2016 7/24/2016 (G) Polyurethane. P-14-0852............................ 8/19/2016 7/25/2016 (G) Polyurethane. P-14-0853............................ 8/22/2016 7/24/2016 (G) Polyurethane. P-14-0853............................ 8/22/2016 7/25/2016 (G) Polyurethane. P-14-0854............................ 8/22/2016 7/24/2016 (G) Polyurethane. P-14-0854............................ 8/22/2016 7/25/2016 (G) Polyurethane. P-15-0569............................ 8/5/2016 8/3/2016 (S) Benzene, 2,4-diisocyanato-1- methyl,homopolymer, N1, N1-dimethyl- 1,3-propanediamine-and polytheylene- polypropylene glycol mono-bu ether- blocked. P-15-0569............................ 8/5/2016 8/4/2016 (S) Benzene, 2,4-diisocyanato-1- methyl,homopolymer, N1, N1-dimethyl- 1,3-propanediamine-and polytheylene- polypropylene glycol mono-bu ether- blocked. P-16-0036............................ 8/29/2016 8/1/2016 (G) Substituted heteropolycycle. P-16-0036............................ 8/29/2016 8/2/2016 (G) Substituted heteropolycycle. P-16-0070............................ 8/22/2016 8/7/2016 (S) Boron sodium oxide (b5nao8), labeled with boron-10. P-16-0070............................ 8/22/2016 8/8/2016 (S) Boron sodium oxide (b5nao8), labeled with boron-10. P-16-0158............................ 8/16/2016 7/21/2016 (G) Modified urethane polymer salt with polyether. P-16-0158............................ 8/16/2016 7/22/2016 (G) Modified urethane polymer salt with polyether. P-16-0160............................ 8/29/2016 7/31/2016 (S) Ethanol, 2-amino-, reaction products with ammonia, by-products from, distillation residues. P-16-0160............................ 8/29/2016 8/1/2016 (S) Ethanol, 2-amino-, reaction products with ammonia, by-products from, distillation residues. P-16-0181............................ 8/12/2016 7/21/2016 (G) Butenoic acid, thio-ethanediyl ester. P-16-0181............................ 8/12/2016 7/22/2016 (G) Butenoic acid, thio-ethanediyl ester. P-16-0281............................ 8/30/2016 8/11/2016 (G) Fatty alcohols--dimers, trimmers, polymers. [[Page 79019]] P-16-0281............................ 8/30/2016 8/12/2016 (G) Fatty alcohols--dimers, trimmers, polymers. ---------------------------------------------------------------------------------------------------------------- V. Correction In the Federal Register of October 27, 2016 (81 FR 74784) (FRL- 9952-62), in the first column, the Docket Identification number is corrected to read EPA-HQ-OPPT-2016-0482. Authority: 15 U.S.C. 2601 et seq. Dated: October 26, 2016. Pamela Myrick, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2016-27193 Filed 11-9-16; 8:45 am] BILLING CODE 6560-50-P
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | Comments identified by the specific case number provided in this document, must be received on or before December 12, 2016. | |
| Contact | For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
| FR Citation | 81 FR 79013 |