82 FR 26435 - Foreign-Trade Zone (FTZ) 39-Dallas-Fort Worth, Texas, Notification of Proposed Production Activity, Valeo North America, Inc., d/b/a Valeo Compressor North America, (Motor Vehicle Air-Conditioner Compressors), Dallas, Texas
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board Federal Register Volume 82, Issue 108 (June 7, 2017)
Foreign-Trade Zones Board
Federal Register Volume 82, Issue 108 (June 7, 2017)
| Page Range | 26435-26435 | |
| FR Document | 2017-11836 |
[Federal Register Volume 82, Number 108 (Wednesday, June 7, 2017)] [Notices] [Page 26435] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-11836] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-25-2017] Foreign-Trade Zone (FTZ) 39--Dallas-Fort Worth, Texas, Notification of Proposed Production Activity, Valeo North America, Inc., d/b/a Valeo Compressor North America, (Motor Vehicle Air- Conditioner Compressors), Dallas, Texas Valeo North America, Inc. d/b/a Valeo Compressor North America (Valeo), submitted a notification of proposed production activity to the FTZ Board for its facility in Dallas, Texas, within FTZ 39-Site 1. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on April 12, 2017. Valeo already has authority to produce air-conditioner compressor assemblies for motor vehicles. The current request would add certain foreign-status components to the scope of authority. Pursuant to 15 CFR 400.14(b), additional FTZ authority would be limited to the specific foreign status components described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Valeo from customs duty payments on the foreign status components used in export production. On its domestic sales, Valeo would be able to choose the duty rates during customs entry procedures that apply to air- conditioner compressor assemblies and electromagnetic compressor/clutch assemblies in the company's existing scope of authority (duty rate ranges from free to 3.1%). Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components sourced from abroad include: Stainless steel bolts; stainless steel screws (less than and more than 6mm in diameters); and, electromagnetic shims and rings (duty rate ranges from free to 8.5%). Public comment is invited from interested parties. Submissions shall be addressed to the Board's Executive Secretary at the address below. The closing period for their receipt is July 17, 2017. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230-0002, and in the ``Reading Room'' section of the Board's Web site, which is accessible via www.trade.gov/ftz. For further information, contact Christopher Wedderburn at [email protected] or (202) 482-1963. Dated: June 2, 2017. Andrew McGilvray, Executive Secretary. [FR Doc. 2017-11836 Filed 6-6-17; 8:45 am] BILLING CODE 3510-DS-P
![Federal Register / Vol. 82, No. 108 / Wednesday, June 7, 2017 / Notices 26435
DEPARTMENT OF COMMERCE FTZ Staff is designated examiner to below) and subsequently authorized by
evaluate and analyze the facts and the FTZ Board.
Foreign-Trade Zones Board information presented in the application Production under FTZ procedures
[B–31–2017] and case record and to report findings could exempt Valeo from customs duty
and recommendations to the FTZ Board. payments on the foreign status
Foreign-Trade Zone 19—Omaha, Public comment is invited from components used in export production.
Nebraska, Application for interested parties. Submissions shall be On its domestic sales, Valeo would be
Reorganization Under Alternative Site addressed to the FTZ Board’s Executive able to choose the duty rates during
Framework Secretary at the address below. The customs entry procedures that apply to
closing period for their receipt is August air-conditioner compressor assemblies
An application has been submitted to 7, 2017. Rebuttal comments in response and electromagnetic compressor/clutch
the Foreign-Trade Zones (FTZ) Board by to material submitted during the assemblies in the company’s existing
the Greater Omaha Chamber of foregoing period may be submitted scope of authority (duty rate ranges from
Commerce, grantee of FTZ 19, during the subsequent 15-day period to free to 3.1%). Customs duties also could
requesting authority to reorganize the August 21, 2017. possibly be deferred or reduced on
zone under the alternative site foreign-status production equipment.
A copy of the application will be
framework (ASF) adopted by the FTZ The components sourced from abroad
available for public inspection at the
Board (15 CFR Sec. 400.2(c)). The ASF include: Stainless steel bolts; stainless
Office of the Executive Secretary,
is an option for grantees for the steel screws (less than and more than
Foreign-Trade Zones Board, Room
establishment or reorganization of zones 6mm in diameters); and,
21013, U.S. Department of Commerce,
and can permit significantly greater electromagnetic shims and rings (duty
1401 Constitution Avenue NW.,
flexibility in the designation of new rate ranges from free to 8.5%).
Washington, DC 20230–0002, and in the
subzones or ‘‘usage-driven’’ FTZ sites Public comment is invited from
‘‘Reading Room’’ section of the FTZ
for operators/users located within a interested parties. Submissions shall be
Board’s Web site, which is accessible
grantee’s ‘‘service area’’ in the context of addressed to the Board’s Executive
via www.trade.gov/ftz.
the FTZ Board’s standard 2,000-acre Secretary at the address below. The
For further information, contact
activation limit for a zone. The closing period for their receipt is July
Christopher Kemp at
application was submitted pursuant to 17, 2017.
Christopher.Kemp@trade.gov or (202)
the Foreign-Trade Zones Act, as A copy of the notification will be
482–0862.
amended (19 U.S.C. 81a–81u), and the available for public inspection at the
regulations of the Board (15 CFR part Dated: June 2, 2017.
Office of the Executive Secretary,
400). It was formally docketed on May Andrew McGilvray,
Foreign-Trade Zones Board, Room
15, 2017. Executive Secretary. 21013, U.S. Department of Commerce,
FTZ 19 was approved by the FTZ [FR Doc. 2017–11834 Filed 6–6–17; 8:45 am] 1401 Constitution Avenue NW.,
Board on January 27, 1983 (Board Order BILLING CODE 3510–DS–P Washington, DC 20230–0002, and in the
204, 48 FR 5772, February 8, 1983). The ‘‘Reading Room’’ section of the Board’s
current zone includes the following Web site, which is accessible via
sites: Site 1 (17 acres)—Cargo Zone, DEPARTMENT OF COMMERCE www.trade.gov/ftz.
LLC, 6200 North 16th Street, Omaha; For further information, contact
and, Site 2 (38 acres)—Riverfront Foreign-Trade Zones Board
Christopher Wedderburn at
Industrial Park, Abbott Drive and Crown [B–25–2017] Chris.Wedderburn@trade.gov or (202)
Point Avenue, Omaha. 482–1963.
The grantee’s proposed service area Foreign-Trade Zone (FTZ) 39—Dallas-
under the ASF would be Burt, Cass, Dated: June 2, 2017.
Fort Worth, Texas, Notification of
Dodge, Douglas, Sarpy, Saunders and Proposed Production Activity, Valeo Andrew McGilvray,
Washington Counties, Nebraska, as North America, Inc., d/b/a Valeo Executive Secretary.
described in the application. If Compressor North America, (Motor [FR Doc. 2017–11836 Filed 6–6–17; 8:45 am]
approved, the grantee would be able to Vehicle Air-Conditioner Compressors), BILLING CODE 3510–DS–P
serve sites throughout the service area Dallas, Texas
based on companies’ needs for FTZ
designation. The application indicates Valeo North America, Inc. d/b/a Valeo DEPARTMENT OF COMMERCE
that the proposed service area is within Compressor North America (Valeo),
and adjacent to the Omaha, Nebraska submitted a notification of proposed International Trade Administration
U.S. Customs and Border Protection production activity to the FTZ Board for [A–570–848]
port of entry. its facility in Dallas, Texas, within FTZ
The applicant is requesting authority 39-Site 1. The notification conforming Freshwater Crawfish Tail Meat From
to reorganize its existing zone to include to the requirements of the regulations of the People’s Republic of China:
both sites as ‘‘magnet’’ sites. The ASF the FTZ Board (15 CFR 400.22) was Preliminary Results of Antidumping
allows for the possible exemption of one received on April 12, 2017. Duty Administrative Review,
magnet site from the ‘‘sunset’’ time Valeo already has authority to Rescission of Review in Part, and
limits that generally apply to sites under produce air-conditioner compressor Preliminary Intent To Rescind New
assemblies for motor vehicles. The
sradovich on DSK3GMQ082PROD with NOTICES
the ASF, and the applicant proposes Shipper Review; 2015–2016
that Site 1 be so exempted. No current request would add certain
subzones/usage-driven sites are being foreign-status components to the scope AGENCY: Enforcement and Compliance,
requested at this time. The application of authority. Pursuant to 15 CFR International Trade Administration,
would have no impact on FTZ 19’s 400.14(b), additional FTZ authority Department of Commerce.
previously authorized subzone. would be limited to the specific foreign SUMMARY: The Department of Commerce
In accordance with the FTZ Board’s status components described in the (the Department) is conducting an
regulations, Christopher Kemp of the submitted notification (as described administrative review and a new
VerDate Sep<11>2014 16:37 Jun 06, 2017 Jkt 241001 PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 E:\FR\FM\07JNN1.SGM 07JNN1](https://thefederalregister.org/doc/82_FR_26543/page/1.svg)
Document Created: 2017-06-07 02:01:13
Document Modified: 2017-06-07 02:01:13
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| FR Citation | 82 FR 26435 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR