Page Range | 26681-26685 | |
FR Document | 2017-11933 |
[Federal Register Volume 82, Number 109 (Thursday, June 8, 2017)] [Notices] [Pages 26681-26685] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-11933] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2016-0700; FRL-9961-71] Certain New Chemicals; Receipt and Status Information for March 2017 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from March 1, 2017 to March 31, 2017. DATES: Comments identified by the specific case number provided in this document, must be received on or before July 10, 2017. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0700, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, Information Management Division, Office of Pollution Prevention and Toxics (7407M), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this action apply to me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that [[Page 26682]] you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from March 1, 2017 to March 31, 2017, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's authority for taking this action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an ``existing'' chemical or a ``new'' chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a ``new chemical,'' while those that are on the TSCA Inventory are classified as an ``existing chemical.'' For more information about the TSCA Inventory, please go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for ``test marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 44 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1--PMNs Received From March 1, 2017 to March 31, 2017 ---------------------------------------------------------------------------------------------------------------- Projected Case No. Received notice end Manufacturer Use Chemical date date importer ---------------------------------------------------------------------------------------------------------------- P-16-0119..................... 3/1/2017 5/30/2017 CBI.............. (G) Intermediate. (G) Chlorofluorocar bon. P-16-0122..................... 3/1/2017 5/30/2017 CBI.............. (G) Intermediate. (G) Chlorofluorocar bon. P-16-0315..................... 3/29/2017 6/27/2017 CBI.............. (S) Industrial (G) Alkyldiene, rubber polymer, formulation. hydroxy terminated alkoxysilylalky lcarbamate. P-16-0338..................... 3/22/2017 6/20/2017 CBI.............. (G) Dyestuff..... (G) Xanthylium, (sulfoaryl)-bis [(substituted aryl) amino]-, sulfo derivs., inner salts, metal salts. P-16-0339..................... 3/22/2017 6/20/2017 CBI.............. (G) Dyestuff..... (G) Substituted triazinyl metal salt, diazotized, coupled with substituted pyridobenzimida zolesulfonic acids, substituted pyridobenzimida zolesulfonic acids, diazotized substituted alkanesulfonic acid, diazotized substituted aromatic sulfonate, diazotized substituted aromatic sulfonate, metal salts. P-16-0406..................... 3/9/2017 6/7/2017 CBI.............. (G) Coatings for (G) solid substrates. Functionalized polyimide. P-16-0407..................... 3/9/2017 6/7/2017 CBI.............. (G) Coatings for (G) solid substrates. Functionalized polyamide. P-16-0438..................... 3/14/2017 6/12/2017 CBI.............. (S) Intermediate (S) 3- for pesticide butenenitrile, inert. 2-(acetyloxy). P-16-0439..................... 3/22/2017 6/20/2017 CBI.............. (G) Coloring (G) Carbon agent. black, (organic acidic carbocyclic)- modified, inorganic salt. P-16-0440..................... 3/22/2017 6/20/2017 CBI.............. (G) Coloring (G) Carbon agent. black, (organic acidic carbocyclic)- modified, metal salt. P-16-0497..................... 3/8/2017 6/6/2017 CBI.............. (G) Prepolymer... (G) Urethane prepolymer. P-16-0505..................... 3/15/2017 6/13/2017 CBI.............. (S) Polymeric (S) resin for Ultra Poly[oxy(methyl- Violet (UV) 1, 2- curable ethanediyl) ] , acrylates. alpha- (1- oxo- 2- propen- 1- yl)-omega- [(1- oxo- 2- propen- 1- yl) oxy] -. P-16-0540..................... 3/17/2017 6/15/2017 CBI.............. (G) Polymeric (G) Diphenolic film former for compound, coatings. polymer with 2- (chloromethyl)o xirane and 4,4'- methylenebis[di- alkyl- substituted phenol]. P-16-0587..................... 3/23/2017 6/21/2017 Kemira Chemicals. (S) Depressant (S) for mineral ore Galactoarabinox flotation. ylan. [[Page 26683]] P-16-0598..................... 3/2/2017 5/31/2017 CBI.............. (G) Binder resin (G) 2-propenoic open non- acid, 2-methyl- dispersive use. , polymer with ethenylbenzene and octadecyl 2- methyl-2- propenoate, reaction products with n- (3-aminophenyl)- 2-[2-(2,3- dihydro-2- substituted-1h- benzimidazol-5- yl)hydrazinylid ene]-3- oxobutanamide. P-17-0086..................... 3/8/2017 6/6/2017 CBI.............. (G) Perfume...... (G) Cycloalkyl, bis(ethoxyalkyl )-, trans- cycloalkyl, bis(ethoxyalkyl )-, cis-. P-17-0152..................... 3/24/2017 6/22/2017 CBI.............. (G) Additive in (G) Poly-(2- home care methyl-1-oxo-2- products.. propen-1-yl) ester with ethanaminium, n,n,n-trialkyl, chloride and methoxypoly(oxy- 1,2- ethanediyl). P-17-0206..................... 1/13/2017 4/13/2017 CBI.............. (G) Flame (G) Imino alkane retardant. amine prhosphate, Imino alkane amine phosphate. P-17-0221..................... 3/17/2017 6/15/2017 CBI.............. (G) Open, non (G) dispersive. Alkylheterocycl ic amine blocked isocyanate, alkoxysilane polymer. P-17-0232..................... 3/2/2017 5/31/2017 CBI.............. (G) Engineering (G) Copolyamide thermoplastic. of an aromatic dicarboxylic acid and a mixture of diamines. P-17-0240..................... 3/1/2017 5/30/2017 CBI.............. (G) (G) Alkenoic Encapsulanting acid, polymer polymer. with alkanepolyolpol yacrylate, 2,2'- azobis[2- methylbutanenit rile]- initiated. P-17-0241..................... 3/6/2017 6/4/2017 CBI.............. (S) The first (G) Acid, chemical reaction synthesis step products with in producing a cadmium down converting selenide quantum dot (cdse), (phosphor) trioctylphosphi solution for use ne and in a light trioctylphosphi emitting diodes ne oxide. (LED). P-17-0242..................... 3/6/2017 6/4/2017 CBI.............. (S) The second (G) Acid, chemical reaction synthesis step products with in producing a cadmium down converting selenide quantum dot sulfide, acid, (phosphor) trioctylphosphi solution for use ne and in a light trioctylphosphi emitting diodes ne oxide. (LED). P-17-0243..................... 3/6/2017 6/4/2017 CBI.............. (S) The third (G) Acid, chemical reaction synthesis step products with in producing a cadmium metal down converting selenide phosphor sulfide, solution for use trioctylphosphi in an optical ne and filter. trioctylphosphi ne oxide. P-17-0244..................... 3/6/2017 6/4/2017 CBI.............. (S) A down (G) Metal oxide converting reaction phosphor products with particle for use cadmium metal in an optical selenide filter. sulfide, and amine. P-17-0245..................... 3/2/2017 5/31/2017 CBI.............. (G) Adhesive for (G) open, non- Polyfluoropolye dispersive use. ther derivative. P-17-0247..................... 3/7/2017 6/5/2017 CBI.............. (G) Chemical raw (G) Branched material. alkyl (c=17) carboxylic acid. P-17-0248..................... 3/7/2017 6/5/2017 CBI.............. (G) Chemical raw (G) Branched material. alkyl (c=18) alcohol. P-17-0249..................... 3/3/2017 6/1/2017 CBI.............. (G) Open, (G) Amine- dispersive use. functional acrylic polymer. P-17-0250..................... 3/3/2017 6/1/2017 CBI.............. (S) Injection (G) Pa6i.6t molding of polymer of special aromatic applications. dicarboxylic acid and alkane diamine. P-17-0251..................... 3/9/2017 6/7/2017 CBI.............. (S) Tracer dye... (G) 1-h-benz[de] isoquinoline- 1,3(2h)-dione-2- (-alkyl-)-(- alkyl-amino-),. P-17-0253..................... 3/14/2017 6/12/2017 CBI.............. (G) The polymer (G) Oxirane, 2- will be produced methyl-, and sold to the polymer with customer in oxirane, methyl liquid form. 2-(substituted Customers will carbomonocycle then blend the isoquinolin- polymer to 2(3h)-yl) achieve their propyl ether. desired formulation properties. P-17-0255..................... 3/14/2017 6/12/2017 KAO Specialties (G) Additive in (G) Americas LLC. toner. Carbomonocyclic dicarboxylic acid, polymer with carbomonocyclic dicarboxylic acid, alkanedioic acid, alkenedioic acid, substituted dioxo- heteropolycycli c, substituted dioxo- heteropolycycli c, alkanedioic acid, alkoxylated alkylidene dicarbomonocycl e and alkoxylated alkylidene dicarbomonocycl e, ester. P-17-0256..................... 3/14/2017 6/12/2017 KAO Specialties (G) Support resin (G) Americas LLC. Carbopolycyclic dicarboxylic acid, dialkyl ester, polymer with dialkyl carbomonocyclic diester, dialkyl substituted carbomonocyclic diester alkali metal salt and alkanediol. P-17-0257..................... 3/15/2017 6/13/2017 CBI.............. (G) Precursor to (S) Single yarns and fibers. walled carbon (G) Specialty nanotubes. additive. (G) Specialty coating. P-17-0258..................... 3/15/2017 6/13/2017 CBI.............. (G) Gypsum foamer (G) Alcohols, C9 11, ethoxylated, sulfates, ammonium salts. P-17-0259..................... 3/16/2017 6/14/2017 CBI.............. (G) Curative for (G) Halogenated thermosetting aromatic amine. resins. P-17-0261..................... 3/21/2017 6/19/2017 IGM Resins (S) Difunctional (S) Poly(oxy-1,2- Charlotte, Inc. type II ethanediyl),alp photoinitiator ha-(2- for use in inks benzoylbenzoyl)- and coatings. omega-[(2- benzoylbenzoyl) oxy]-. P-17-0262..................... 3/21/2017 6/19/2017 CBI.............. (G) Paint raw (G) Acryl- materials. modified epoxy polymer with vegetable oil, fatty acid, acrylates and methacrylates with organic amine. [[Page 26684]] P-17-0263..................... 3/22/2017 6/20/2017 CBI.............. (G) Most (G) Zirconium formulators will carboxylates add less than 5% sodium of *product complexes. name* to make their formulated product volume. (i.e. 10 gallon batch would contain 0.5 gallon of our product. Our product will be metered in by hand (via smaller containers) or by pumping into an open and/or closed vessel at desired levels and then mixed mechanically. manufactures/ formulators typically use modern manufacturing techniques including ppr, engineering controls, and best management practices. P-17-0264..................... 3/22/2017 6/20/2017 Allnex USA Inc... (S) Binder for (G) Alkanoic glass coatings. acid, 2-alkyl-, (S) Coating resin substituted intermediate. alkyl ester, polymer with alkyl alkenoate, substituted carbomonocycle, substituted alkyl alkenoate and alkyl substituted alkenoate, substituted alkanenitrile- initiated. P-17-0265..................... 3/22/2017 6/20/2017 Allnex USA Inc... (S) Binder for (G) Alkanoic glass coatings. acid, alkyl-, (S) Coating resin substituted intermediate. alkyl ester, polymer with alkyl alkenoate, substituted carbomonocycle, substituted alkyl alkenoate and alkyl substituted alkenoate and alkenoic acid substituted alkanenitrile- initiated, compds. with alkylamino alkanol. P-17-0266..................... 3/22/2017 6/20/2017 Sasol Chemicals (S) Additive in (S) Alcohols, (USA) LLC. metalworking C12 13-branched fluids. and linear, (S) Additive in dimerized. minimum quantity lubricant for metalworking. (S) Chemical intermediate for alcohol derivatives. P-17-0270..................... 3/30/2017 6/28/2017 CBI.............. (G) Low (G) Alkyl refractive index perfluorinated coating. acryloyl ester. Bottom of Form. ---------------------------------------------------------------------------------------------------------------- For the 12 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 2--NOCs Received From March 1, 2017 to March 31, 2017 ---------------------------------------------------------------------------------------------------------------- Commencement Case No. Received date date Chemical ---------------------------------------------------------------------------------------------------------------- J-16-0003.................................. 3/23/2017 3/21/2017 (S) Genetically engineered yeast yd71578. P-12-0258.................................. 3/3/2017 1/1/2013 (S) 1-butanol, 2-bromo-. P-12-0258.................................. 3/3/2017 1/1/2013 (S) 2-butanol, 1-bromo-. P-13-0149.................................. 3/3/2017 2/24/2017 (G) Substituted hydroxyalkyl methacrylate. P-15-0450.................................. 3/30/2017 3/20/2017 (S) Aluminum cobalt lithium nickel oxide. P-15-0714.................................. 3/2/2017 2/8/2017 (S) Ethanaminium, n,n,n-trimethyl-2- [(1-oxo-2-propen-1-y)oxy]-, chloride (1:1), polymer with ethanedial and 2-propenamide. P-15-0749.................................. 3/16/2017 3/14/2017 (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate. P-16-0183.................................. 3/15/2017 2/15/2017 (S) 9-octadecenoic acid, 12-hydroxy- , (9z,12r)-, homopolymer, potassium salt (1:1). P-16-0387.................................. 3/3/2017 2/23/2017 (G) Alphatic polycarboxylic acid, polymer with alicylic polyhydric alcohol and polyoxyalkylene. P-16-0579.................................. 3/14/2017 3/11/2017 (G) Waste plastics, poly(ethylene terephthalate), depolymd. with polypropylene glycol ether with glycerol (3:1), polymers with alkenoic and alkanoic acids. P-17-0019.................................. 3/8/2017 2/8/2017 (G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated. P-17-0158.................................. 3/9/2017 2/16/2017 (G) Perylene bisimide. ---------------------------------------------------------------------------------------------------------------- [[Page 26685]] Authority: 15 U.S.C. 2601 et seq. Dated: April 26, 2017. Megan Carroll, Deputy Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2017-11933 Filed 6-7-17; 8:45 am] BILLING CODE 6560-50-P
Category | Regulatory Information | |
Collection | Federal Register | |
sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
Publisher | Office of the Federal Register, National Archives and Records Administration | |
Section | Notices | |
Action | Notice. | |
Dates | Comments identified by the specific case number provided in this document, must be received on or before July 10, 2017. | |
Contact | For technical information contact: Jim Rahai, Information Management Division, Office of Pollution Prevention and Toxics (7407M), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
FR Citation | 82 FR 26681 |