Page Range | 41993-41994 | |
FR Document | 2017-18678 |
[Federal Register Volume 82, Number 170 (Tuesday, September 5, 2017)] [Notices] [Pages 41993-41994] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-18678] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2009-0026] Curtis-Strauss LLC: Grant of Expansion of Recognition AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: In this notice, OSHA announces its final decision to expand the scope of recognition for Curtis-Strauss LLC as a Nationally Recognized Testing Laboratory (NRTL). DATES: The expansion of the scope of recognition becomes available on September 5, 2017. FOR FURTHER INFORMATION CONTACT: Information regarding this notice is available from the following sources: Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, telephone: (202) 693-1999; email: [email protected]. General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, telephone: (202) 693-2110; email: [email protected]. OSHA's Web page includes information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html). SUPPLEMENTARY INFORMATION: I. Notice of Final Decision OSHA hereby gives notice of the expansion of the scope of recognition of Curtis-Strauss LLC (CSL) as a NRTL. CSL's expansion covers the addition of five test standards to its scope of recognition. OSHA recognition of a NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products. The Agency processes applications by a NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages are available from the Agency's Web site at: http://www.osha.gov/dts/otpca/nrtl/index.html. CSL submitted an application, dated December 30, 2016, (OSHA-2009- 0026-0073) to expand its recognition to include five additional test standards. OSHA staff performed a comparability analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application. OSHA published the preliminary notice announcing CSL's expansion application in the Federal Register on June 21, 2017 (82 FR 28356). The Agency requested comments by July 6, 2017, but it received no comments in response to this notice. OSHA now is proceeding with this final notice to grant expansion of CSL's scope of recognition. To obtain or review copies of all public documents pertaining to CSL's application, go to: www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210. Docket No. OSHA-2009-0026 contains all materials in the record concerning CSL's recognition. II. Final Decision and Order OSHA staff examined CSL's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that CSL meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitation and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant CSL's scope of recognition. OSHA limits the expansion of CSL's recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1 below. Table 1--List of Appropriate Test Standards for Inclusion in CSL's NRTL Scope of Recognition ------------------------------------------------------------------------ Test standard Test standard title ------------------------------------------------------------------------ UL 197........................ Commercial Electric Cooking Appliances. UL 763........................ Motor-Operated Commercial Food Preparing Machines. UL 982........................ Motor-Operated Household Food Preparing Machines. UL 60335-2-3.................. Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons. UL 60335-2-34................. Safety of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor- Compressors. ------------------------------------------------------------------------ [[Page 41994]] OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products. The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved. A. Conditions In addition to those conditions already required by 29 CFR 1910.7, CSL must abide by the following conditions of the recognition: 1. CSL must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s); 2. CSL must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and 3. CSL must continue to meet the requirements for recognition, including all previously published conditions on CSL's scope of recognition, in all areas for which it has recognition. Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of CSL, subject to the limitation and conditions specified above. III. Authority and Signature Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7. Signed at Washington, DC, on August 25, 2017. Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2017-18678 Filed 9-1-17; 8:45 am] BILLING CODE 4510-26-P
Category | Regulatory Information | |
Collection | Federal Register | |
sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
Publisher | Office of the Federal Register, National Archives and Records Administration | |
Section | Notices | |
Action | Notice. | |
Dates | The expansion of the scope of recognition becomes available on September 5, 2017. | |
Contact | Information regarding this notice is available from the following sources: | |
FR Citation | 82 FR 41993 |