82 FR 46522 - Cold-Drawn Mechanical Tubing From China, Germany, India, Italy, Korea, and Switzerland; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations
INTERNATIONAL TRADE COMMISSION Federal Register Volume 82, Issue 192 (October 5, 2017)
Federal Register Volume 82, Issue 192 (October 5, 2017)
| Page Range | 46522-46524 | |
| FR Document | 2017-21428 |
[Federal Register Volume 82, Number 192 (Thursday, October 5, 2017)] [Notices] [Pages 46522-46524] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2017-21428] ----------------------------------------------------------------------- INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-576-577 and 731-TA-1362-1367 (Final)] Cold-Drawn Mechanical Tubing From China, Germany, India, Italy, Korea, and Switzerland; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations AGENCY: United States International Trade Commission. ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-576-577 and 731-TA-1362-1367 (Final) pursuant to the Tariff Act of 1930 (``the Act'') to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of cold-drawn mechanical tubing from China, Germany, India, Italy, Korea, and Switzerland, provided for in subheadings 7304.31.30, 7304.31.60, 7304.51.10, 7304.51.50, 7306.30.50, and 7306.50.50 of the Harmonized Tariff Schedule of the United States, preliminarily determined by the Department of Commerce to be subsidized by the Governments of China and India. Determinations with respect to imports of cold-drawn mechanical tubing alleged to be sold at less than fair value are pending. DATES: September 25, 2017. FOR FURTHER INFORMATION CONTACT: Keysha Martinez (202-205-2136), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server (https://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION: Scope.--For purposes of these investigations, the Department of Commerce has defined the subject merchandise as cold-drawn mechanical tubing of carbon and alloy steel (cold-drawn mechanical tubing) of circular cross-section, in actual outside diameters less than 331 mm, and regardless of wall thickness, surface finish, end finish or industry specification. The subject cold-drawn mechanical tubing is a tubular product with a circular cross-sectional shape that has been cold-drawn or otherwise cold-finished after the initial tube formation in a manner that involves a change in the diameter or wall thickness of the tubing, or both. The subject cold-drawn mechanical tubing may be produced from either welded (e.g., electric resistance welded, continuous welded, etc.) or seamless (e.g., pierced, pilgered or extruded, etc.) carbon or alloy steel tubular products. It may also be heat treated after cold working. Such heat treatments may include, but are not limited to, annealing, normalizing, quenching and tempering, stress relieving or finish annealing. Typical cold-drawing methods for subject merchandise include, but are not limited to, drawing over mandrel, rod drawing, plug drawing, sink drawing and similar processes that involve reducing the outside diameter of the tubing with a die or similar device, whether or not controlling the inside diameter of the tubing with an internal support device such as a mandrel, rod, plug or similar device. Subject cold-drawn mechanical tubing is typically certified to meet industry specifications for cold-drawn tubing including but not limited to: (1) American Society for Testing and Materials (ASTM) or American Society of Mechanical Engineers (ASME) specifications ASTM A-512, ASTM A-513 Type 3 (ASME SA513 Type 3), ASTM A-513 Type 4 (ASME SA513 Type 4), ASTM A-513 Type 5 (ASME SA513 Type 5), ASTM A-513 Type 6 [[Page 46523]] (ASME SA513 Type 6), ASTM A-519 (cold-finished); (2) SAE International (Society of Automotive Engineers) specifications SAE J524, SAE J525, SAE J2833, SAE J2614, SAE J2467, SAE J2435, SAE J2613; (3) Aerospace Material Specification (AMS) AMS T-6736 (AMS 6736), AMS 6371, AMS 5050, AMS 5075, AMS 5062, AMS 6360, AMS 6361, AMS 6362, AMS 6371, AMS 6372, AMS 6374, AMS 6381, AMS 6415; (4) United States Military Standards (MIL) MIL-T-5066 and MIL-T- 6736; (5) foreign standards equivalent to one of the previously listed ASTM, ASME, SAE, AMS or MIL specifications including but not limited to: (a) German Institute for Standardization (DIN) specifications DIN 2391-2, DIN 2393-2, DIN 2394-2); (b) European Standards (EN) EN 10305-1, EN 10305-2, EN 10305-4, EN 10305-6 and European national variations on those standards (e.g., British Standard (BS EN), Irish Standard (IS EN) and German Standard (DIN EN) variations, etc.); (c) Japanese Industrial Standard (JIS) JIS G 3441 and JIS G 3445; and (6) proprietary standards that are based on one of the above-listed standards. The subject cold-drawn mechanical tubing may also be dual or multiple certified to more than one standard. Pipe that is multiple certified as cold-drawn mechanical tubing and to other specifications not covered by this scope, is also covered by the scope of this investigation when it meets the physical description set forth above. Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is 2 percent or less by weight. For purposes of this scope, the place of cold-drawing determines the country of origin of the subject merchandise. Subject merchandise that is subject to minor working in a third country that occurs after drawing in one of the subject countries including, but not limited to, heat treatment, cutting to length, straightening, nondestruction testing, deburring or chamfering, remains within the scope of the investigation. All products that meet the written physical description are within the scope of this investigation unless specifically excluded or covered by the scope of an existing order. Merchandise that meets the physical description of cold-drawn mechanical tubing above is within the scope of the investigation even if it is also dual or multiple certified to an otherwise excluded specification listed below. The following products are outside of, and/or specifically excluded from, the scope of this investigation: (1) Cold-drawn stainless steel tubing, containing 10.5 percent or more of chromium by weight and not more than 1.2 percent of carbon by weight; (2) products certified to one or more of the ASTM, ASME or American Petroleum Institute (API) specifications listed below:ASTM A-53; ASTM A-106; ASTM A-179 (ASME SA 179); ASTM A-192 (ASME SA 192); ASTM A-209 (ASME SA 209); ASTM A-210 (ASME SA 210); ASTM A-213 (ASME SA 213); ASTM A-334 (ASME SA 334); ASTM A-423 (ASME SA 423); ASTM A-498; ASTM A-496 (ASME SA 496); ASTM A-199; ASTM A-500; ASTM A-556; ASTM A-565; API 5L; and API 5CT except that any cold-drawn tubing product certified to one of the above excluded specifications will not be excluded from the scope if it is also dual-or multiple-certified to any other specification that otherwise would fall within the scope of this investigation. The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7304.31.3000, 7304.31.6050, 7304.51.1000, 7304.51.5005, 7304.51.5060, 7306.30.5015, 7306.30.5020, 7306.50.5030. Subject merchandise may also enter under numbers 7306.30.1000 and 7306.50.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive. Background.--The final phase of these investigations is being scheduled pursuant to section 705(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b)), as a result of affirmative preliminary determinations by the Department of Commerce that certain benefits which constitute subsidies within the meaning of section 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in China and India of cold-drawn mechanical tubing. The investigations were requested in petitions filed on April 19, 2017, by ArcelorMittal Tubular Products, Shelby, Ohio; Michigan Seamless Tube, LLC, South Lyon, Michigan; PTC Alliance Corp., Wexford, Pennsylvania; Webco Industries, Inc., Sand Springs, Oklahoma; and Zekelman Industries, Inc., Farrell, Pennsylvania. For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207). Participation in the investigations and public service list.-- Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.-- Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Staff report.--The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on November 21, 2017, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules. Hearing.--The Commission will hold a hearing in connection with the final [[Page 46524]] phase of these investigations beginning at 9:30 a.m. on Wednesday, December 6, 2017, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before December 1, 2017. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should participate in a prehearing conference to be held on December 4, 2017, at the U.S. International Trade Commission Building, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing. Written submissions.--Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is November 29, 2017. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is December 12, 2017. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before December 12, 2017. On December 29, 2017, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before January 3, 2018, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on E-Filing, available on the Commission's Web site at https://www.usitc.gov/secretary/documents/handbook_on_filing_procedures.pdf, elaborates upon the Commission's rules with respect to electronic filing. Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff. In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission's rules. By order of the Commission. Issued: September 29, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017-21428 Filed 10-4-17; 8:45 am] BILLING CODE 7020-02-P
![46522 Federal Register / Vol. 82, No. 192 / Thursday, October 5, 2017 / Notices
filed separately from the submissions on personnel, solely for cybersecurity impaired persons can obtain
the issues under review and are not purposes. All nonconfidential written information on this matter by contacting
governed by the page limitations recited submissions will be available for public the Commission’s TDD terminal on 202–
above. The complainants’ opening inspection at the Office of the Secretary 205–1810. Persons with mobility
submission on the issues of remedy, the and on EDIS. impairments who will need special
public interest and bonding is to The authority for the Commission’s assistance in gaining access to the
include proposed remedial orders for determination is contained in section Commission should contact the Office
the Commission’s consideration; the 337 of the Tariff Act of 1930, as of the Secretary at 202–205–2000.
date that the asserted patents expire; the amended (19 U.S.C. 1337), and in part General information concerning the
HTSUS numbers under which the 210 of the Commission’s Rules of Commission may also be obtained by
accused products are imported; and the Practice and Procedure (19 CFR part accessing its internet server (https://
names of known importers of the 210). www.usitc.gov). The public record for
products at issue in this investigation. By order of the Commission. these investigations may be viewed on
Written submissions by the parties the Commission’s electronic docket
Issued: September 29, 2017.
and the public must be filed no later (EDIS) at https://edis.usitc.gov.
than close of business on Friday, Lisa R. Barton,
Secretary to the Commission. SUPPLEMENTARY INFORMATION:
October 13, 2017. Reply submissions by Scope.—For purposes of these
the parties and the public must be filed [FR Doc. 2017–21426 Filed 10–4–17; 8:45 am]
investigations, the Department of
no later than the close of business on BILLING CODE 7020–02–P
Commerce has defined the subject
Monday, October 23, 2017. No further
merchandise as cold-drawn mechanical
submissions will be permitted unless
INTERNATIONAL TRADE tubing of carbon and alloy steel (cold-
otherwise ordered by the Commission.
Persons filing written submissions COMMISSION drawn mechanical tubing) of circular
must file the original document cross-section, in actual outside
[Investigation Nos. 701–TA–576–577 and diameters less than 331 mm, and
electronically on or before the deadlines 731–TA–1362–1367 (Final)]
stated above and submit 8 true paper regardless of wall thickness, surface
copies to the Office of the Secretary by finish, end finish or industry
Cold-Drawn Mechanical Tubing From
noon the next day pursuant to section specification. The subject cold-drawn
China, Germany, India, Italy, Korea,
210.4(f) of the Commission’s Rules of mechanical tubing is a tubular product
and Switzerland; Scheduling of the
Practice and Procedure (19 CFR with a circular cross-sectional shape
Final Phase of Countervailing Duty and
210.4(f)). Submissions should refer to that has been cold-drawn or otherwise
Antidumping Duty Investigations
the investigation number (‘‘Inv. No. cold-finished after the initial tube
337–TA–1010’’) in a prominent place on AGENCY: United States International formation in a manner that involves a
the cover page and/or the first page. (See Trade Commission. change in the diameter or wall thickness
Handbook for Electronic Filing ACTION: Notice. of the tubing, or both. The subject cold-
Procedures, https://www.usitc.gov/ drawn mechanical tubing may be
SUMMARY: The Commission hereby gives produced from either welded (e.g.,
secretary/fed_reg_notices/rules/
notice of the scheduling of the final electric resistance welded, continuous
handbook_on_electronic_filing.pdf).
phase of antidumping and welded, etc.) or seamless (e.g., pierced,
Persons with questions regarding filing
countervailing duty investigation Nos. pilgered or extruded, etc.) carbon or
should contact the Secretary (202–205–
701–TA–576–577 and 731–TA–1362– alloy steel tubular products. It may also
2000).
Any person desiring to submit a 1367 (Final) pursuant to the Tariff Act be heat treated after cold working. Such
document to the Commission in of 1930 (‘‘the Act’’) to determine heat treatments may include, but are not
confidence must request confidential whether an industry in the United limited to, annealing, normalizing,
treatment. All such requests should be States is materially injured or quenching and tempering, stress
directed to the Secretary to the threatened with material injury, or the relieving or finish annealing. Typical
Commission and must include a full establishment of an industry in the cold-drawing methods for subject
statement of the reasons why the United States is materially retarded, by merchandise include, but are not
Commission should grant such reason of imports of cold-drawn limited to, drawing over mandrel, rod
treatment. See 19 CFR 201.6. Documents mechanical tubing from China, drawing, plug drawing, sink drawing
for which confidential treatment by the Germany, India, Italy, Korea, and and similar processes that involve
Commission is properly sought will be Switzerland, provided for in reducing the outside diameter of the
treated accordingly. All information, subheadings 7304.31.30, 7304.31.60, tubing with a die or similar device,
including confidential business 7304.51.10, 7304.51.50, 7306.30.50, and whether or not controlling the inside
information and documents for which 7306.50.50 of the Harmonized Tariff diameter of the tubing with an internal
confidential treatment is properly Schedule of the United States, support device such as a mandrel, rod,
sought, submitted to the Commission for preliminarily determined by the plug or similar device.
purposes of this Investigation may be Department of Commerce to be Subject cold-drawn mechanical
disclosed to and used: (i) By the subsidized by the Governments of China tubing is typically certified to meet
Commission, its employees and Offices, and India. Determinations with respect industry specifications for cold-drawn
and contract personnel (a) for to imports of cold-drawn mechanical tubing including but not limited to:
developing or maintaining the records tubing alleged to be sold at less than fair (1) American Society for Testing and
ethrower on DSK3G9T082PROD with NOTICES
of this or a related proceeding, or (b) in value are pending. Materials (ASTM) or American Society
internal investigations, audits, reviews, DATES: September 25, 2017. of Mechanical Engineers (ASME)
and evaluations relating to the FOR FURTHER INFORMATION CONTACT: specifications ASTM A–512, ASTM
programs, personnel, and operations of Keysha Martinez (202–205–2136), Office A–513 Type 3 (ASME SA513 Type 3),
the Commission including under 5 of Investigations, U.S. International ASTM A–513 Type 4 (ASME SA513
U.S.C. Appendix 3; or (ii) by U.S. Trade Commission, 500 E Street SW., Type 4), ASTM A–513 Type 5 (ASME
government employees and contract Washington, DC 20436. Hearing- SA513 Type 5), ASTM A–513 Type 6
VerDate Sep<11>2014 19:52 Oct 04, 2017 Jkt 244001 PO 00000 Frm 00047 Fmt 4703 Sfmt 4703 E:\FR\FM\05OCN1.SGM 05OCN1](https://thefederalregister.org/doc/82_FR_46714/page/1.svg)
![46524 Federal Register / Vol. 82, No. 192 / Thursday, October 5, 2017 / Notices
phase of these investigations beginning www.usitc.gov/secretary/documents/ information on this matter by contacting
at 9:30 a.m. on Wednesday, December 6, handbook_on_filing_procedures.pdf, the Commission’s TDD terminal on 202–
2017, at the U.S. International Trade elaborates upon the Commission’s rules 205–1810. Persons with mobility
Commission Building. Requests to with respect to electronic filing. impairments who will need special
appear at the hearing should be filed in Additional written submissions to the assistance in gaining access to the
writing with the Secretary to the Commission, including requests Commission should contact the Office
Commission on or before December 1, pursuant to section 201.12 of the of the Secretary at 202–205–2000.
2017. A nonparty who has testimony Commission’s rules, shall not be General information concerning the
that may aid the Commission’s accepted unless good cause is shown for Commission may also be obtained by
deliberations may request permission to accepting such submissions, or unless accessing its internet server (https://
present a short statement at the hearing. the submission is pursuant to a specific www.usitc.gov). The public record for
All parties and nonparties desiring to request by a Commissioner or these reviews may be viewed on the
appear at the hearing and make oral Commission staff. Commission’s electronic docket (EDIS)
presentations should participate in a In accordance with sections 201.16(c) at https://edis.usitc.gov.
prehearing conference to be held on and 207.3 of the Commission’s rules, SUPPLEMENTARY INFORMATION:
December 4, 2017, at the U.S. each document filed by a party to the Background.—On September 5, 2017,
International Trade Commission investigations must be served on all the Commission determined that the
Building, if deemed necessary. Oral other parties to the investigations (as domestic interested party group
testimony and written materials to be identified by either the public or BPI response to its notice of institution (82
submitted at the public hearing are service list), and a certificate of service FR 25324, June 1, 2017) of the subject
governed by sections 201.6(b)(2), must be timely filed. The Secretary will five-year reviews was adequate and that
201.13(f), and 207.24 of the not accept a document for filing without the respondent interested party group
Commission’s rules. Parties must submit a certificate of service. response was inadequate for all reviews.
any request to present a portion of their Authority: These investigations are The Commission did not find any other
hearing testimony in camera no later being conducted under authority of title circumstances that would warrant
than 7 business days prior to the date of VII of the Tariff Act of 1930; this notice conducting full reviews.1 Accordingly,
the hearing. is published pursuant to section 207.21 the Commission determined that it
Written submissions.—Each party of the Commission’s rules. would conduct expedited reviews
who is an interested party shall submit By order of the Commission. pursuant to section 751(c)(3) of the
a prehearing brief to the Commission. Issued: September 29, 2017. Tariff Act of 1930 (19 U.S.C. 1675(c)(3)).
Prehearing briefs must conform with the Lisa R. Barton, For further information concerning
provisions of section 207.23 of the Secretary to the Commission. the conduct of these reviews and rules
Commission’s rules; the deadline for [FR Doc. 2017–21428 Filed 10–4–17; 8:45 am] of general application, consult the
filing is November 29, 2017. Parties may BILLING CODE 7020–02–P
Commission’s Rules of Practice and
also file written testimony in connection Procedure, part 201, subparts A and B
with their presentation at the hearing, as (19 CFR part 201), and part 207,
provided in section 207.24 of the INTERNATIONAL TRADE subparts A, D, E, and F (19 CFR part
Commission’s rules, and posthearing COMMISSION 207).
briefs, which must conform with the Staff report.—A staff report
[Investigation Nos. 731–TA–865–867 (Third
provisions of section 207.25 of the containing information concerning the
Review)]
Commission’s rules. The deadline for subject matter of the reviews will be
filing posthearing briefs is December 12, Stainless Steel Butt-Weld Pipe Fittings placed in the nonpublic record on
2017. In addition, any person who has From Italy, Malaysia, and the November 2, 2017, and made available
not entered an appearance as a party to Philippines; Scheduling of Expedited to persons on the Administrative
the investigations may submit a written Five-Year Reviews Protective Order service list for these
statement of information pertinent to reviews. A public version will be issued
the subject of the investigations, AGENCY: United States International thereafter, pursuant to section
including statements of support or Trade Commission. 207.62(d)(4) of the Commission’s rules.
opposition to the petition, on or before ACTION: Notice. Written submissions.—As provided in
December 12, 2017. On December 29, section 207.62(d) of the Commission’s
2017, the Commission will make SUMMARY: The Commission hereby gives rules, interested parties that are parties
available to parties all information on notice of the scheduling of expedited to the reviews and that have provided
which they have not had an opportunity reviews pursuant to the Tariff Act of individually adequate responses to the
to comment. Parties may submit final 1930 (‘‘the Act’’) to determine whether notice of institution,2 and any party
comments on this information on or revocation of the antidumping duty other than an interested party to the
before January 3, 2018, but such final orders on stainless steel butt-weld pipe reviews may file written comments with
comments must not contain new factual fittings from Italy, Malaysia, and the the Secretary on what determinations
information and must otherwise comply Philippines would be likely to lead to the Commission should reach in the
with section 207.30 of the Commission’s continuation or recurrence of material
rules. All written submissions must injury within a reasonably foreseeable 1 A record of the Commissioners’ votes, the
conform with the provisions of section time. Commission’s statement on adequacy, and any
ethrower on DSK3G9T082PROD with NOTICES
individual Commissioner’s statements will be
201.8 of the Commission’s rules; any DATES: September 5, 2017.
available from the Office of the Secretary and at the
submissions that contain BPI must also FOR FURTHER INFORMATION CONTACT: Commission’s Web site.
conform with the requirements of Amanda Lawrence (202–205–3185), 2 The Commission has found the responses
sections 201.6, 207.3, and 207.7 of the Office of Investigations, U.S. submitted on behalf of Core Pipe Products, Inc.,
Shaw Alloying Piping Products, LLC, and Taylor
Commission’s rules. The Commission’s International Trade Commission, 500 E Forge Stainless to be individually adequate.
Handbook on E-Filing, available on the Street SW., Washington, DC 20436. Comments from other interested parties will not be
Commission’s Web site at https:// Hearing-impaired persons can obtain accepted (see 19 CFR 207.62(d)(2)).
VerDate Sep<11>2014 19:52 Oct 04, 2017 Jkt 244001 PO 00000 Frm 00049 Fmt 4703 Sfmt 4703 E:\FR\FM\05OCN1.SGM 05OCN1](https://thefederalregister.org/doc/82_FR_46714/page/3.svg)
Document Created: 2017-10-05 00:54:00
Document Modified: 2017-10-05 00:54:00
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Action | Notice. | |
| Dates | September 25, 2017. | |
| Contact | Keysha Martinez (202-205-2136), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server (https://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov. | |
| FR Citation | 82 FR 46522 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR