83 FR 19223 - Carbon and Certain Alloy Steel Wire Rod From Mexico: Notice of Correction to Final Results of Antidumping Duty Administrative Review and Final Determination of No Shipments; 2015-2016
DEPARTMENT OF COMMERCE
International Trade Administration Federal Register Volume 83, Issue 85 (May 2, 2018)
International Trade Administration
Federal Register Volume 83, Issue 85 (May 2, 2018)
| Page Range | 19223-19223 | |
| FR Document | 2018-09309 |
[Federal Register Volume 83, Number 85 (Wednesday, May 2, 2018)] [Notices] [Page 19223] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2018-09309] ----------------------------------------------------------------------- DEPARTMENT OF COMMERCE International Trade Administration [A-201-830] Carbon and Certain Alloy Steel Wire Rod From Mexico: Notice of Correction to Final Results of Antidumping Duty Administrative Review and Final Determination of No Shipments; 2015-2016 AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. FOR FURTHER INFORMATION CONTACT: Keith Haynes, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5139. SUPPLEMENTARY INFORMATION: On April 17, 2018, the Department of Commerce (Commerce) published the final results of the 2015-2016 antidumping duty administrative review of carbon and certain alloy steel wire rod from Mexico.\1\ In that notice, Commerce inadvertently listed an incorrect weighted-average dumping margin of 12.57 percent for Deacero S.A.P.I. de C.V. (Deacero), a producer and exporter of wire rod.\2\ The correct weighted-average dumping margin for Deacero is 12.56 percent. --------------------------------------------------------------------------- \1\ See Carbon and Certain Alloy Steel Wire Rod From Mexico: Final Results of Antidumping Duty Administrative Review and Final Determination of No Shipments; 2015-2016, 83 FR 16832 (April 17, 2018) (Final Results). \2\ Id., 83 FR at 16833. --------------------------------------------------------------------------- This correction to the Final Results is issued and published in accordance with sections 751(a)(1) and 777(i)(l) of the Tariff Act of 1930, as amended. Dated: April 26, 2018. Christian Marsh, Deputy Assistant Secretary for Enforcement and Compliance. [FR Doc. 2018-09309 Filed 5-1-18; 8:45 am] BILLING CODE 3510-DS-P
![Federal Register / Vol. 83, No. 85 / Wednesday, May 2, 2018 / Notices 19223
countervailable subsidies at the rates and (c) a drive hub; 4 and (4) any under HTSUS subheadings 8450.11.0040,
listed below: combination of the foregoing subassemblies. 8450.11.0080, 8450.90.2000, and
Excluded from the scope are stacked 8450.90.6000. Although the HTSUS
Net washer-dryers and commercial washers. The subheadings are provided for convenience
countervailable term ‘‘stacked washer-dryers’’ denotes and customs purposes, the written
Exporter/producer distinct washing and drying machines that
subsidy rate description of the merchandise subject to this
(percent) are built on a unitary frame and share a
common console that controls both the scope is dispositive.
Daewoo Electronics Cor- washer and the dryer. The term ‘‘commercial [FR Doc. 2018–09310 Filed 5–1–18; 8:45 am]
poration ............................. 80.25 washer’’ denotes an automatic clothes BILLING CODE 3510–DS–P
Samsung Electronics Co., washing machine designed for the ‘‘pay per
Ltd. .................................... 20.75 use’’ market meeting either of the following
All-Others .............................. 15.28 two definitions:
(1) (a) It contains payment system DEPARTMENT OF COMMERCE
electronics; 5 (b) it is configured with an
Notification Regarding Administrative externally mounted steel frame at least six International Trade Administration
Protective Order inches high that is designed to house a coin/
This notice also serves as the only token operated payment system (whether or [A–201–830]
reminder to parties subject to an not the actual coin/token operated payment
system is installed at the time of
administrative protective order (APO) of importation); (c) it contains a push button
Carbon and Certain Alloy Steel Wire
their responsibility concerning the user interface with a maximum of six Rod From Mexico: Notice of Correction
return or destruction of proprietary manually selectable wash cycle settings, with to Final Results of Antidumping Duty
information disclosed under APO in no ability of the end user to otherwise modify Administrative Review and Final
accordance with 19 CFR 351.305. water temperature, water level, or spin speed Determination of No Shipments; 2015–
Timely notification of the return or for a selected wash cycle setting; and (d) the 2016
destruction of APO materials or console containing the user interface is made
of steel and is assembled with security
conversion to judicial protective order is AGENCY: Enforcement and Compliance,
fasteners; 6 or
hereby requested. Failure to comply (2) (a) it contains payment system International Trade Administration,
with the regulations and terms of an electronics; (b) the payment system Department of Commerce.
APO is a violation subject to sanction. electronics are enabled (whether or not the
Commerce is issuing and publishing payment acceptance device has been FOR FURTHER INFORMATION CONTACT:
these final results in accordance with installed at the time of importation) such Keith Haynes, AD/CVD Operations,
sections 751(c), 752(b), and 777(i)(1) of that, in normal operation,7 the unit cannot Office III, Enforcement and Compliance,
the Act and 19 CFR 351.218. begin a wash cycle without first receiving a International Trade Administration,
signal from a bona fide payment acceptance U.S. Department of Commerce, 1401
Dated: April 26, 2018. device such as an electronic credit card
Constitution Avenue NW, Washington,
Christian Marsh, reader; (c) it contains a push button user
interface with a maximum of six manually DC 20230; telephone: (202) 482–5139.
Deputy Assistant Secretary for Enforcement
and Compliance. selectable wash cycle settings, with no ability SUPPLEMENTARY INFORMATION: On April
of the end user to otherwise modify water
Appendix temperature, water level, or spin speed for a
17, 2018, the Department of Commerce
selected wash cycle setting; and (d) the (Commerce) published the final results
Scope of the Order of the 2015–2016 antidumping duty
console containing the user interface is made
The products covered by this order are all of steel and is assembled with security administrative review of carbon and
large residential washers and certain fasteners. certain alloy steel wire rod from
subassemblies thereof from Korea. Also excluded from the scope are Mexico.1 In that notice, Commerce
For purposes of this order, the term ‘‘large automatic clothes washing machines with a
residential washers’’ denotes all automatic vertical rotational axis and a rated capacity
inadvertently listed an incorrect
clothes washing machines, regardless of the of less than 3.70 cubic feet, as certified to the weighted-average dumping margin of
orientation of the rotational axis, except as U.S. Department of Energy pursuant to 10 12.57 percent for Deacero S.A.P.I. de
noted below, with a cabinet width (measured CFR 429.12 and 10 CFR 429.20, and in C.V. (Deacero), a producer and exporter
from its widest point) of at least 24.5 inches accordance with the test procedures of wire rod.2 The correct weighted-
(62.23 cm) and no more than 32.0 inches established in 10 CFR part 430. average dumping margin for Deacero is
(81.28 cm). The products subject to this order are
Also covered are certain subassemblies currently classifiable under subheading
12.56 percent.
used in large residential washers, namely: (1) 8450.20.0090 of the Harmonized Tariff This correction to the Final Results is
All assembled cabinets designed for use in System of the United States (HTSUS). issued and published in accordance
large residential washers which incorporate, Products subject to this order may also enter with sections 751(a)(1) and 777(i)(l) of
at a minimum: (a) At least three of the six
the Tariff Act of 1930, as amended.
cabinet surfaces; and (b) a bracket; (2) all 4 A ‘‘drive hub’’ is the hub at the center of the
assembled tubs 1 designed for use in large base that bears the load from the motor. Dated: April 26, 2018.
residential washers which incorporate, at a 5 ‘‘Payment system electronics’’ denotes a circuit
Christian Marsh,
minimum: (a) A tub; and (b) a seal; (3) all board designed to receive signals from a payment
assembled baskets 2 designed for use in large acceptance device and to display payment amount, Deputy Assistant Secretary for Enforcement
residential washers which incorporate, at a selected settings, and cycle status. Such electronics and Compliance.
also capture cycles and payment history and [FR Doc. 2018–09309 Filed 5–1–18; 8:45 am]
minimum: (a) A side wrapper; 3 (b) a base;
provide for transmission to a reader.
daltland on DSKBBV9HB2PROD with NOTICES
6 A ‘‘security fastener’’ is a screw with a non- BILLING CODE 3510–DS–P
1A ‘‘tub’’ is the part of the washer designed to standard head that requires a non-standard driver.
hold water. Examples include those with a pin in the center of 1 See Carbon and Certain Alloy Steel Wire Rod
2 A ‘‘basket’’ (sometimes referred to as a ‘‘drum’’) the head as a ‘‘center pin reject’’ feature to prevent
is the part of the washer designed to hold clothing standard Allen wrenches or Torx drivers from From Mexico: Final Results of Antidumping Duty
or other fabrics. working. Administrative Review and Final Determination of
3 A ‘‘side wrapper’’ is the cylindrical part of the 7 ‘‘Normal operation’’ refers to the operating No Shipments; 2015–2016, 83 FR 16832 (April 17,
basket that actually holds the clothing or other mode(s) available to end users (i.e., not a mode 2018) (Final Results).
fabrics. designed for testing or repair by a technician). 2 Id., 83 FR at 16833.
VerDate Sep<11>2014 22:14 May 01, 2018 Jkt 244001 PO 00000 Frm 00013 Fmt 4703 Sfmt 9990 E:\FR\FM\02MYN1.SGM 02MYN1](https://thefederalregister.org/doc/83_FR_19308/page/1.svg)
Document Created: 2018-05-02 00:49:25
Document Modified: 2018-05-02 00:49:25
| Category | Regulatory Information | |
| Collection | Federal Register | |
| sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
| Publisher | Office of the Federal Register, National Archives and Records Administration | |
| Section | Notices | |
| Contact | Keith Haynes, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5139. | |
| FR Citation | 83 FR 19223 |
2025 Federal Register | Disclaimer | Privacy Policy
USC | CFR | eCFR