Page Range | 24110-24116 | |
FR Document | 2018-11194 |
[Federal Register Volume 83, Number 101 (Thursday, May 24, 2018)] [Notices] [Pages 24110-24116] From the Federal Register Online [www.thefederalregister.org] [FR Doc No: 2018-11194] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2017-0715; FRL-9977-48] Certain New Chemical Substances; Receipt and Status Information for January 2018 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application under Biotech exemption; an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from January 1, 2018 to January 31, 2018. DATES: Comments identified by the specific case number provided in this document must be received on or before June 25, 2018. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2017-0715, and the specific case number for the chemical substance related to your comment, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001. Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, Information Management Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. Executive Summary A. What action is the Agency taking? This document provides the receipt and status reports for the period from January 1, 2018 to January 31, 2018. The Agency is providing notice of receipt of PMNs, SNUNs and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis. B. What is the Agency's authority for taking this action? Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et seq., a chemical substance may be either an ``existing'' chemical substance or a ``new'' chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a ``new chemical substance,'' while a chemical substance that is listed on the TSCA Inventory is classified as an ``existing chemical substance.'' (See TSCA section 3(11).) For more information about the TSCA Inventory go to: https://www.epa.gov/tsca-inventory. Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3). TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for ``test marketing'' purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review. [[Page 24111]] C. Does this action apply to me? This action provides information that is directed to the public in general. D. Does this action have any incremental economic impacts or paperwork burdens? No. E. What should I consider as I prepare my comments for EPA? 1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. Status Reports In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See the Federal Register of May 12, 1995, (60 FR 25798) (FRL-4942-7)). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis. III. Receipt Reports For the PMN/SNUN/MCANs received by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices received by EPA during this period: The EPA case number assigned to the notice, a notation of whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity. As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number and the version column will note ``Initial submission''. Submissions which are amendments to previous submissions will have a case number followed by the letter ``A'' (e.g., P-18-1234A). The version column designates submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables. Table I--PMN/SNUN/MCANs Received From 1/2/2018 to 1/31/2018 ---------------------------------------------------------------------------------------------------------------- Received Case No. Version date Manufacturer Use Chemical substance ---------------------------------------------------------------------------------------------------------------- P-16-0404A............... 3 1/22/2018 CBI................. (G) A colorant for (G) Alkyl ester, 2- dyeing various ({4-[2- synthetic fibers (trisubstituted and fabrics. Open, phenyl)azo]-5- non-dispersive use. acetamido-2- substitutedphenyl{ t (substituted alkoxy)amino). P-16-0405A............... 6 1/25/2018 CBI................. (G) A colorant for (G) Alkyl ester, 2- dyeing various ({5-acetamido-2- synthetic fibers alkoxy-4-[2- and fabrics. Open, (substituted-2,1- non-dispersive use. benzothiazol-3- yl)azo] pheny]{time} (disu bstituted)amino). P-16-0408A............... 3 1/25/2018 CBI................. (G) A colorant for (G) 3- dyeing various Pyridinecarbonitri synthetic fibers le, 1,2-dihydro- and fabrics. Open, trisubstituted-5- non-dispersive use. [2-(disubstituted phenyl)azo]-2-oxo. P-16-0421A............... 3 1/17/2018 Guardian Industries (S) Additive to (S) Flue dust, Corp. facilitate melting glass manufg. of sand during desulfurization. manufacture of glass. P-17-0221A............... 3 1/17/2018 CBI................. (G) Coating polymer (G) Alkylheterocyclic amine blocked isocyanate, alkoxysilane polymer. P-17-0281A............... 6 1/12/2018 CBI................. (G) Water reducible (G) Polysiloxane- resin. polyester polyol carboxylate. P-17-0282A............... 6 1/12/2018 Elantas PDG, Inc.... (S) This is a (S) Isocyanic acid, component of a polymethylenepolyp mixture that is henylene ester, used as an caprolactam- and impregnating phenol-blocked. varnish for stators and motors. P-17-0319A............... 6 1/26/2018 Inolex Chemical (S) This material (S) L-Isoleucine, Company. will be used an C18-22-alkyl emollient for a esters, fabric softener/ ethanesulfonates. conditioning product. P-17-0385A............... 4 1/23/2018 Al-Fares Corp....... (S) Cleaning (S) Carbonic acid, product for bis(2-ethylhexyl) detailing ester. vehicles. Industrial use emollient. P-17-0424A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as chloro-3-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. [[Page 24112]] P-17-0425A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as chloro-2-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0426A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as chloro-4-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0427A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as chloro-5-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0428A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4- chemical: Used as chloro-2-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0429A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as fluoro-2-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0430A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as fluoro-4-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0431A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4- chemical: Used as fluoro-2-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0432A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as fluoro-4-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0433A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as fluoro-3-methyl-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0434A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, chemical: Used as 2,3,6-trifluoro-, a tracer in water sodium salt (1:1). solution to measure flow in deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0435A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as fluoro-2- a tracer in water (trifluoromethyl)- solution to , sodium measure flow in salt(1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. [[Page 24113]] P-17-0436A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as fluoro-4- a tracer in water (trifluoromethyl)- solution to , sodium salt measure flow in (1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0437A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2- chemical: Used as fluoro-6- a tracer in water (trifluoromethyl)- solution to , sodium salt measure flow in (1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0438A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3- chemical: Used as fluoro-5- a tracer in water (trifluoromethyl)- solution to , sodium salt measure flow in (1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0439A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4- chemical: Used as fluoro-3- a tracer in water (trifluoromethyl)- solution to , sodium salt measure flow in (1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-17-0440A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4- chemical: Used as fluoro-2- a tracer in water (trifluoromethyl)- solution to , sodium salt measure flow in (1:1). deep oil or gas bearing strata; when in a solid blend with polymer to measure flow in deep oil or gas bearing strata; or in a solid proppant bead form used to measure flow in deep oil or gas bearing strata. P-18-0020A............... 2 1/23/2018 Myriant Corporation. (G) Industrial (S) Butanediolic coating. acid, polyol with 2-ethyl-2- (hydroxymethyl)- 1,3-propanediol, 2,5-Furandione and 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano-1H-inden- 5(or 6)-yl ester. P-18-0036A............... 3 1/24/2018 CBI................. (G) Water repellant (S) Siloxanes and Silicones, di-Me, 3-[3-carboxy-2(or 3)-(octenyl)-1- oxopropoxy]propyl group-terminated. P-18-0041A............... 2 1/3/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione, polyol for further polymer with 2- reaction. ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano- 1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate. P-18-0041A............... 3 1/23/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione, polyol for further polymer with 2- reaction. ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano- 1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate. P-18-0041A............... 4 1/29/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione, polyol for further polymer with 2- reaction. ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano- 1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate. P-18-0042A............... 3 1/3/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione, coating. polymer with 2- ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano-1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate, polymer with 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexa ne, 2-hydroxyethyl acrylate- and 2- hydroxyethyl methacrylate- blocked. P-18-0042A............... 4 1/23/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione, coating. polymer with 2- ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano-1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate, polymer with 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexa ne, 2-hydroxyethyl acrylate- and 2- hydroxyethyl methacrylate- blocked. [[Page 24114]] P-18-0042A............... 5 1/29/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione, coating. polymer with 2- ethyl-2- (hydroxymethyl)- 1,3-propanediol, 3a,4,5,6,7,7a- hexahydro-4,7- methano-1H-inden- 5(or 6)-yl ester, ester with 2,3- dihydroxypropyl neodecanoate, polymer with 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexa ne, 2-hydroxyethyl acrylate- and 2- hydroxyethyl methacrylate- blocked. P-18-0058A............... 2 1/8/2018 CBI................. (S) Component of (S) Phosphonium, electroconductive trihexyltetradecyl- low-noise grease , salt with 1,1,1- for long-term trifluoro-n- lubrication of [(trifluoromethyl) capped or sealed sulfonyl]methanesu ball bearings. lfonamide (1:1). P-18-0070................ 3 1/4/2018 Arrowstar, LLC...... (G) Chemical (G) Waste plastics, intermediate for polyester, polyurethane depolymd. with industry. glycols, polymers with dicarboxylic acids. P-18-0070A............... 5 1/16/2018 Arrowstar, LLC...... (G) Chemical (G) Waste plastics, intermediate for polyester, polyurethane depolymd. with industry. glycols, polymers with dicarboxylic acids. P-18-0082................ 2 1/12/2018 Cytec Industries Inc (S) Isolated (G) Aspartic acid, intermediate used tallow modified in the manufacture diester. of a surface- active agent. P-18-0083................ 1 1/3/2018 CBI................. (G) Dispersant (S) 2-propenoic additive. acid, telomers with bu alc.-2-[(2- propen-1- yloxy)methyl]oxira ne reaction products, sodium bisulfite and sodium 2-hydroxy-3- (2-propen-1-yloxy)- 1-propanesulfonate (1:1), sodium salts, peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)- initiated. P-18-0083A............... 5 1/8/2018 CBI................. (G) Dispersant (S) 2-propenoic additive. acid, telomers with bu alc.-2-[(2- propen-1- yloxy)methyl]oxira ne reaction products, sodium bisulfite and sodium 2-hydroxy-3- (2-propen-1-yloxy)- 1-propanesulfonate (1:1), sodium salts, peroxydisulfuric acid ([(ho)s(o)2]2o2) sodium salt (1:2)- initiated. P-18-0085................ 1 1/8/2018 CBI................. (G) Industrial use (G) Fatty acids in oilfied. reaction products with ethyleneamines and dialkyl ester. P-18-0086................ 1 1/10/2018 CBI................. (S) Intermediate (G) Propanenitrile, for a polyurethane polyalkylpolyamine catalyst. . P-18-0087................ 1 1/11/2018 Genesee Polymers (S) UV curing (S) 1-propanethiol, Corporation. agent, silicone 3,3'-(1,1,3,3- rubber cross tetramethyl-1,3- linker. disiloxanediyl)bis- . P-18-0087A............... 2 1/22/2018 Genesee Polymers (S) UV curing (S) 1-propanethiol, Corporation. agent, silicone 3,3'-(1,1,3,3- rubber cross tetramethyl-1,3- linker. disiloxanediyl)bis- . P-18-0088................ 1 1/16/2018 CBI................. (G) Oil and gas (G) Di(substituted- production. 1,3- trialkylammonium) dialkylammonium salt. P-18-0090................ 1 1/17/2018 Preschooltourinc.... (S) Water reducing (G) Alkenoic acid, agent for use in alkyl-, polymer concrete. with alkenoic acid, ester with .alpha.-alkyl- .omega.- hydroxypoly(oxy- 1,2-ethanediyl), salt. P-18-0091................ 1 1/17/2018 Resinate Materials (S) Intermediate (G) Vegetable oil, Group, Inc. for use in the polymers with manufacture of diethylene glycol- polymers. and polyol- and polyethylene glycol-depolymd. poly(ethylene terephthalate) waste plastics and arylcarboxylic acid anhydride. P-18-0092................ 2 1/26/2018 Shell chemical lp-- (G) The TBPMI (S) Tri-butyl martinez catalyst chemical is used methyl phosphonium plant. as a catalyst, the iodide. catalyst is imported and used in the manufacture of monoethlyene glycol (MEG). P-18-0093................ 1 1/23/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxane, 1,3,5,7,9,11,13,15- octakis (polyfluoroalkyl)- . P-18-0093A............... 2 1/24/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxane, 1,3,5,7,9,11,13,15- octakis (polyfluoroalkyl)- . P-18-0094................ 1 1/23/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxanealkylsub stituted, 3,5,7,9,11,13,15- heptakis(polyfluor oalkyl)-. P-18-0094A............... 2 1/24/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxanealkylsub stituted, 3,5,7,9,11,13,15- heptakis(polyfluor oalkyl)-. P-18-0095................ 1 1/23/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxanealkanol, 3,5,7,9,11,13,15- heptakis(polyfluor oalkyl)-, acetate. P-18-0095A............... 2 1/24/2018 CBI................. (G) Additive to (G) plastics. Pentacyclo[9.5.1.1 3,9.15,15.17,13]oc tasiloxanealkanol, 3,5,7,9,11,13,15- heptakis(polyfluor oalkyl)-, acetate. P-18-0096................ 1 1/23/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted coating resin. carbopolycycle, polymer with substituted carbomonocycles and oxybis[alkanol]. P-18-0096A............... 2 1/24/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted coating resin. carbopolycycle, polymer with substituted carbomonocycles and oxybis[alkanol]. P-18-0096A............... 3 1/24/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted coating resin. carbopolycycle, polymer with substituted carbomonocycles and oxybis[alkanol]. [[Page 24115]] P-18-0097................ 1 1/24/2018 MANE USA............ (S) Maderal is a (S) 1,3-dioxane, 2- fragrance that (3,3-dimethyl-1- will be added to cyclohexen-1-yl)- consumer care 2,5,5-trimethly-. products, personal care products, fine fragrances. P-18-0098................ 1 1/24/2018 Allnex USA Inc...... (S) Dispersing (G) Polyphosphoric additive for acids, polymers pigments. with (alkoxyalkoxy)alka nol and substituted heteromonocycle. P-18-0099................ 1 1/25/2018 CBI................. (G) Photoinitiator. (S) Methanone,1,1'- (diethylgermylene) bis(1-(4- methoxyphyenyl). P-18-0100................ 1 1/26/2018 Allnex USA Inc...... (G) UV curable (G) Substituted coating resin. alkanoic acid polymer with alkylcarbonate, alkanediols and isocyanate substituted carbomonocycles, sodium salt, alkanoic acid- substituted polyol reaction products- blocked. P-18-0101................ 3 1/30/2018 CBI................. (G) Industrial..... (G) Pentaerythritol, mixed esters with linear and branched fatty acids. P-18-0102................ 1 1/26/2018 Allnex USA Inc...... (G) UV curable (G) Alkanoic acid, coating Resin. ester with [oxybis(alkylene)] bis[alkyl- substituted alkanediol], polymer with alkylcarbonate, alkanediols, substituted alkanoic acid and isocyanate and alkyl substituted carbomonocycle, sodium salt. J-18-0001A............... 2 1/3/2018 Zea 2, LLC.......... (S) For the (G) modified production of L- Corynebacterium alanine. glutamicum. ---------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not subject to a CBI claim) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the submission document type (initial or amended), the version number, the date the TME was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the TME, and the chemical substance identity. Table II--TMEs and Biotech Exemptions Received From 1/2/2018 to 1/31/2018 ---------------------------------------------------------------------------------------------------------------- Case No. Version Received date Manufacturer Use Chemical substance ---------------------------------------------------------------------------------------------------------------- T-18-0002............... 2 1/30/2018 CBI................ (G) Industrial use. (G) Pentaerythritol, mixed esters with linear and branched fatty acids. ---------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the submission document type (initial or amended), the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity. Table III--NOCs Received From 1/2/2018 to 1/31/2018 ---------------------------------------------------------------------------------------------------------------- Commencement If amendment, type of Case No. Received date date amendment Chemical substance ---------------------------------------------------------------------------------------------------------------- P-10-0203............... 1/1/2018 7/1/2010 ........................... (G) Hexanedioic acid, polymer with alkanediol, dimethyl carbonate, alkanediol, hydroxy-(hydroxyalkyl)- alkylpropanoic acid, 1,1'-methylenebis[4- isocyanatocyclohexane] , substituted alkyl diamine and lactone, compd. with alkyl amine. P-12-0124A.............. 1/5/2018 12/22/2017 Specific Name.............. (G) Cyclohexanedicarboxyli c acid, dialkyl ester. P-13-0193............... 1/4/2018 4/16/2014 ........................... (G) Poly[oxy(methyl-1,2- ethanediyl)], .alpha.- hydro-.omega.- [[[dialkyl- (morpholinyl)alkyliden e]amino]alkylethoxy]-, ether with alkyl- (hydroxyalkyl)- alkanediol. P-15-0738............... 1/19/2018 12/30/2017 ........................... (S) Siloxanes and Silicones, di-Me, 3-(2- hydroxyphenyl)propyl group-terminated, polymers with 1,4- benzenedicarbonyl dichloride, bisphenol A and carbonic dichloride, 4-(1,1- dimethylethyl)phenyl esters. P-16-0233............... 1/23/2018 1/17/2018 ........................... (G) Benzoic acid, alkyl- 2-hydroxyl-, branched and linear, monosodium salts Benzoic acid, 2- hydroxyalkyl-, branched and linear, monosodium salts. P-16-0376A.............. 1/19/2018 12/6/2017 Generic Name............... (G) Substituted alkyl reaction products with modified 1-(1,1- dimethylethoxy)-4- ethenylbenzene-styrene polymer. P-17-0175A.............. 1/8/2018 11/21/2017 Generic Name............... (G) Fluorinated acrylic copolymer. [[Page 24116]] P-17-0190............... 1/24/2018 1/3/2018 ........................... (G) Butanoic acid, 3- oxo-, 2-[(2-methyl-1- oxo-2-propen-1- yl)oxy]ethyl ester, polymer with cycloalkyl 2-methyl-2- propenoate, ethenylbenzene, 2- ethylhexyl 2- propenoate, methyl 2- methyl-2-propenoate and 2-methylpropyl 2- methyl-2-propenoate. P-17-0237............... 1/25/2018 1/10/2018 ........................... (S) 1,6,10- Dodecatriene, 7,11- dimethyl-3-methylene-, (6E)-, homopolymer, hydrogenated, 2- hydroxyethyl- terminated. P-17-0326............... 1/19/2018 1/16/2018 ........................... (G) Allyloxymethylacrylate . P-18-0026............... 1/8/2018 1/8/2018 ........................... (S) Silsesquioxanes, 2,4,4-trimethylpentyl, hydroxy-terminated. P-18-0032............... 1/12/2018 12/14/2017 ........................... (G) Alkyl alkenoic acid, alkyl ester, polymer with alkyl alkenoate, dialkyl alkanediol, substituted carbomonocycle, disubstituted heteromonocycle, disubstituted heteropolycyclic, alkanediol, substituted alkyl alkyl alkenoate and substituted heteromonocycle, dialkyl peroxide initiated. ---------------------------------------------------------------------------------------------------------------- In Table IV of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information received by EPA during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity. Table IV--Test Information Received From 1/1/2018 to 1/31/2018 ------------------------------------------------------------------------ Type of test Chemical Case No. Received date information substance ------------------------------------------------------------------------ J-18-0001............ 1/25/2018 Document (G) Modified describing Corynebacteriu experiments m glutamicum. validating cell inactivation methods. Includes narrative, data. P-14-0321............ 1/19/2018 2-week Whole- (S) 2-Chloro- Body Inhalation 1,1,1,2- toxicity study Tetrafluoropro (OECD 412). pane(244bb). P-16-0206............ 1/19/2018 Water Solubility (G) (OECD 105). Formaldehyde ketone condensate polymer. P-16-0543............ 1/25/2018 Air Quality (G) monthly Halogenophosph monitoring oric acid report. metal salt. P-17-0005............ 1/4/2018 (1) Test Plan (S) 1- for Inhalation Tetradecene Test (OECD 412). homopolymer hydrogenated. P-17-0302............ 1/25/2018 (1) Read Across (G) Neopentyl Justification. Glycol Ester (2) Mouse of Mixed Lymphoma Assay Linear and (OECD 476).. Branched Carboxylic Acids. (3) Chromosome Aberration Assay (OECD 473). (4) Pre-Natal Developmental Assay (OECD 414). (1) 90 Day Repeated Dose Assay (OECD 408). P-17-0364............ 1/15/2018 (1) Particle (G) Dicyloalkyl- Size alkane-di- Distribution isocyanate Surface Tension homopolymer, Study. alkyl alcohol and polyalkyl glycol mono- alkyl-ether- blocked. P-17-0382............ 1/19/2018 (1) Fish (S) Amides, Juvenile Growth tallow, N,N- (OECD 215). bis(2- (1) Daphia hydroxypropyl) Reproduction . Test (OECD 211).. P-18-0007............ 1/22/2018 Local Lymph Node (S) Glycerides, Assay (OECD soya mono- and 429). di-, epoxidized, acetates. P-18-0076............ 1/5/2018 (1) Test study (G) 1,3,5- in Male and Triazine-2,4- Female Wistar Diamine Rats Oral Derivative. Administration (Gavage). ------------------------------------------------------------------------ If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described above to access additional non-CBI information that may be available. Authority: 15 U.S.C. 2601 et seq. Dated: May 4, 2018. Pamela Myrick, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2018-11194 Filed 5-23-18; 8:45 am] BILLING CODE 6560-50-P
Category | Regulatory Information | |
Collection | Federal Register | |
sudoc Class | AE 2.7: GS 4.107: AE 2.106: | |
Publisher | Office of the Federal Register, National Archives and Records Administration | |
Section | Notices | |
Action | Notice. | |
Dates | Comments identified by the specific case number provided in this document must be received on or before June 25, 2018. | |
Contact | For technical information contact: Jim Rahai, Information Management Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email | |
FR Citation | 83 FR 24110 |