SUPPLEMENTARY INFORMATION:

Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA) requires the Commission to adopt mandatory standards for durable infant or toddler products. 15 U.S.C. 2056a(b)(1). Mandatory standards must be “substantially the same as” voluntary standards, or may be “more stringent” than voluntary standards, if the Commission determines that more stringent requirements would further reduce the risk of injury associated with the products. Id. Mandatory standards may be based, in whole or in part, on a voluntary standard.

Pursuant to section 104(b)(4)(B) of the CPSIA, if a voluntary standards organization revises a standard that has been adopted, in whole or in part, as a consumer product safety standard under CPSIA section 104, it must notify the Commission. The revised voluntary standard then shall be considered to be a consumer product safety standard issued by the Commission under section 9 of the Consumer Product Safety Act (15 U.S.C. 2058), effective 180 days after the date on which the organization notifies the Commission (or a later date specified by the Commission in the Federal Register ) unless, within 90 days after receiving that notice, the Commission responds to the organization that it has determined that the proposed revision does not improve the safety of the consumer product covered by the standard, and therefore, the Commission is retaining its existing mandatory consumer product safety standard. 15 U.S.C. 2056a(b)(4)(B).

Under this authority, in 2015 the Commission issued a mandatory safety rule for frame child carriers. The rulemaking created 16 CFR part 1230, which incorporated by reference ASTM F2549-14a, Standard Consumer Safety Specification for Frame Child Carriers. 80 FR 11121 (Mar. 2, 2015). The mandatory standard included performance requirements and test methods, as well as requirements for warning labels and instructions, to address hazards to children associated with frame child carriers. The voluntary standard has not been revised since promulgation of the final rule.

In May 2022, ASTM published a revised version of the incorporated voluntary standard. On June 6, 2022, ASTM notified the Commission that it had approved the revised version of the voluntary standard. CPSC staff is assessing the revised voluntary standard to determine, consistent with section 104(b)(4)(B) of the CPSIA, its effect on the safety of consumer products covered by the standard. The Commission invites public comment on that question to inform Staff's assessment and any subsequent Commission consideration of the revisions in ASTM F2549-22.^[1]

The existing voluntary standard and the revised voluntary standard are available for review in several ways. ASTM has provided on its website ( https://www.astm.org/​CPSC.htm), at no cost, a read-only copy of ASTM F2549-22 and a red-lined version that identifies the changes made to ASTM F2549-14a. Likewise, a read-only copy of the existing, incorporated standard is available for viewing, at no cost, on the ASTM website at: https://www.astm.org/​READINGLIBRARY/​. Interested parties can also download copies of the standards by purchasing them from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: 610-832-9585; https://www.astm.org. Alternatively, interested parties can schedule an appointment to inspect copies of the standards at CPSC's Division of the Secretariat, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814, telephone: 301-504-7479; email: cpsc-os@cpsc.gov.

Comments must be received by June 30, 2022. Because of the short statutory time frame Congress established for the Commission to consider revised ( printed page 36312) voluntary standards under section 104(b)(4) of the CPSIA, CPSC will not consider comments received after this date.

87 FR 36311